Australia at the crossroads : a review of school science practical work

In Australia we are at a crossroad in science education. We have come from a long history of adopting international curricula, through to blending international and Australian developed materials, to the present which is a thoroughly unique Australian curriculum in science. This paper documents Australia’s journey over the past 200 years, as we prepare for the unveiling of our first truly Australian National Curriculum. One of the unique aspects of this curriculum is the emphasis on practical work and inquiry-based learning. This paper identifies seven forms of practical work currently used in Australian schools and the purposes aligned with each form by 138 pre-service and experienced in-service teachers. The paper explores the question “What does the impending national curriculum, with its emphasis on practical inquiry mean to the teachers now, are they ready?” The study suggests that practical work in Australian schools is multifaceted, and the teacher aligned purposes are dependent not only upon the age of the student, but also on the type of practical work being undertaken. It was found that most teachers are not ready to teach using inquiry-based pedagogy and cite lack of content knowledge, behaviour management, and lack of physical resources and availability of classroom space as key issues which will hinder their implementation of the inquiry component of Australia’s pending curriculum in science.

Faculty mentoring, evidence-based assessment, and student learning : an Australian exploration of American initiatives

There have been many improvements in Australian engineering education since the 1990s. However, given the recent drive for assuring the achievement of identified academic standards, more progress needs to be made, particularly in the area of evidence-based assessment. This paper reports on initiatives gathered from the literature and engineering academics in the USA, through an Australian National Teaching Fellowship program. The program aims to establish a process to help academics in designing and implementing evidence-based assessments that meet the needs of not only students and the staff that teach them, but also industry as well as accreditation bodies. The paper also examines the kinds and levels of support necessary for engineering academics, especially early career ones, to help meet the expectations of the current drive for assured quality and standards of both research and teaching. Academics are experiencing competing demands on their time and energy with very high expectations in research performance and increased teaching responsibilities, although many are researchers who have not had much pedagogic training. Based on the literature and investigation of relevant initiatives in the USA, we conducted interviews with several identified experts and change agents who have wrought effective academic cultural change within their institutions and beyond. These reveal that assuring the standards and quality of student learning outcomes through evidence-based assessments cannot be appropriately addressed without also addressing the issue of pedagogic training for academic staff. To be sustainable, such training needs to be complemented by a culture of on-going mentoring support from senior academics, formalised through the university administration, so that mentors are afforded resources, time, and appropriate recognition.

The complementary potential of multimedia and science demonstrations

Science is often considered as one of the cornerstones of human advancement. Despite its importance in our society, science as a subject in schools appears to be losing ground. Lack of relevance, the nature of the curriculum and the pedagogical approach to teaching are some of the reasons which researchers believe are causing a “swing” away from science. This paper will argue for the effectiveness of simple science demonstrations as a feasible pedagogical option with a high task value and which has the potential to reengage and reinvigorate student interest in the subject. This paper describes a case study (N = 25) in which the Integrative problem based learning model for science was implemented in a year nine science class. The study was conducted at a secondary school in Australia. Teacher demonstrations were situated in classroom activities in a “Why is it so?” problem/question format. Qualitative data gathered from students demonstrated a number of benefits of this approach. This paper then explores ways in which Web 2.0 technologies could be incorporated to enhance the value of science demonstrations

Practical insights into curricula integration for primary science

As indicated in a previous Teaching Science article, effective planning for curricula integration requires using standards from two (or more) subject areas (e.g., science and English, science and art or science and mathematics), which also becomes the assessment foci for teaching and learning. Curricula integration of standards into an activity necessitates pedagogical knowledge for developing students’ learning in both subject areas. For science education, the skills and tools for curricula integration include the use of other key learning areas (KLAs). A balance between teacher and student-centred science education programs that draw on democratic processes (e.g., Beane, 1997) can be used to make real-world links to target students’ individual needs. This article presents practical ways to commence thinking about curricula integration towards using Australian curriculum standards.

Re-imagining STEM : peer scaffolding ICT in initial teacher education

In this paper, we report on how peer scaffolding was used to effect change in tertiary teaching practice and academic disposition in the use of Information and Communication Technology (ICT) in Science teaching and learning. We present a small-scale case study investigating the practice of one of this paper’s authors. It is told through two salient episodes which narratively describe the scaffolding used to support a teaching experiment. This was made possible through the national Teaching Teachers for the Future Project (2011-2012) which aimed to enhance the technological pedagogical capability of pre-service teachers across Australia. The outcome was a demonstrable shift in the academic’s disposition towards the use and benefits of ICT in teaching science and an increase in skills and confidence for both the academic and his students. This study and its outcomes fit within the contemporary push to “re-imagine” the teaching of Science, and more broadly of STEM, in schools.

What makes an LMS effective : a synthesis of current literature

There is a growing number of organizations and universities now utilising e-learning practices in their teaching and learning programs. These systems have allowed for knowledge sharing and provide opportunities for users to have access to learning materials regardless of time and place. However, while the uptake of these systems is quite high, there is little research into the effectiveness of such systems, particularly in higher education. This paper investigates the methods that are used to study the effectiveness of e-learning systems and the factors that are critical for the success of a learning management system (LMS). Five major success categories are identified in this study and explained in depth. These are the teacher, student, LMS design, learning materials and external support.

Re-imagining STEM : peer scaffolding ICT in Initial Teacher Education

In this paper, we report on how peer scaffolding was used to effect change in tertiary teaching practice and academic disposition in the use of Information and Communication Technology (ICT) in Science teaching and learning. We present a small-scale case study investigating the practice of one of this paper’s authors. It is told through two salient episodes which narratively describe the scaffolding used to support a teaching experiment. This was made possible through the national Teaching Teachers for the Future Project (2011-2012) which aimed to enhance the technological pedagogical capability of pre-service teachers across Australia. The outcome was a demonstrable shift in the academic’s disposition towards the use and benefits of ICT in teaching science and an increase in skills and confidence for both the academic and his students. This study and its outcomes fit within the contemporary push to “re-imagine” the teaching of Science, and more broadly of STEM, in schools.

A Reliability test system for educational purposes-basic data

The IEEE Subcommittee on the Application of Probability Methods (APM) published the IEEE Reliability Test System (RTS) [1] in 1979. This system provides a consistent and generally acceptable set of data that can be used both in generation capacity and in composite system reliability evaluation [2,3]. The test system provides a basis for the comparison of results obtained by different people using different methods. Prior to its publication, there was no general agreement on either the system or the data that should be used to demonstrate or test various techniques developed to conduct reliability studies. Development of reliability assessment techniques and programs are very dependent on the intent behind the development as the experience of one power utility with their system may be quite different from that of another utility. The development and the utilization of a reliability program are, therefore, greatly influenced by the experience of a utlity and the intent of the system manager, planner and designer conducting the reliability studies. The IEEE-RTS has proved to be extremely valuable in highlighting and comparing the capabilities (or incapabilities) of programs used in reliability studies, the differences in the perception of various power utilities and the differences in the solution techniques. The IEEE-RTS contains a reasonably large power network which can be difficult to use for initial studies in an educational environment.

A Reliability test system for educational purposes-basic data

The IEEE Reliability Test System (RTS) developed by the Application of Probability Method Subcommittee has been used to compare and test a wide range of generating capacity and composite system evaluation techniques and subsequent digital computer programs. A basic reliability test system is presented which has evolved from the reliability education and research programs conducted by the Power System Research Group at the University of Saskatchewan. The basic system data necessary for adequacy evaluation at the generation and composite generation and transmission system levels are presented together with the fundamental data required to conduct reliability-cost/reliability-worth evaluation

A Reliability test system for educational purposes-basic results

A set of basic reliability indices at the generation and composite generation and transmission levels for a small reliability test system are presented. The test system and the results presented have evolved from reliability research and teaching programs. The indices presented are for fundamental reliability applications which should be covered in a power system reliability teaching program. The RBTS test system and the basic indices provide a valuable reference for faculty and students engaged in reliability teaching and research

The ECOS green buildings project : data dramatization, visualization and manipulation

Buildings are key mediators between human activity and the environment around them, but details of energy usage and activity in buildings is often poorly communicated and understood. ECOS is an Eco-Visualization project that aims to contextualize the energy generation and consumption of a green building in a variety of different climates. The ECOS project is being developed for a large public interactive space installed in the new Science and Engineering Centre of the Queensland University of Technology that is dedicated to delivering interactive science education content to the public. This paper focuses on how design can develop ICT solutions from large data sets to create meaningful engagement with environmental data.

How difficult are exams? A framework for assessing the complexity of introductory programming exams

Student performance on examinations is influenced by the level of difficulty of the questions. It seems reasonable to propose therefore that assessment of the difficulty of exam questions could be used to gauge the level of skills and knowledge expected at the end of a course. This paper reports the results of a study investigating the difficulty of exam questions using a subjective assessment of difficulty and a purpose-built exam question complexity classification scheme. The scheme, devised for exams in introductory programming courses, assesses the complexity of each question using six measures: external domain references, explicitness, linguistic complexity, conceptual complexity, length of code involved in the question and/or answer, and intellectual complexity (Bloom level). We apply the scheme to 20 introductory programming exam papers from five countries, and find substantial variation across the exams for all measures. Most exams include a mix of questions of low, medium, and high difficulty, although seven of the 20 have no questions of high difficulty. All of the complexity measures correlate with assessment of difficulty, indicating that the difficulty of an exam question relates to each of these more specific measures. We discuss the implications of these findings for the development of measures to assess learning standards in programming courses.

A qualitative think aloud study of the early Neo-Piagetian stages of reasoning in novice programmers

Recent research indicates that some of the difficulties faced by novice programmers are manifested very early in their learning. In this paper, we present data from think aloud studies that demonstrate the nature of those difficulties. In the think alouds, novices were required to complete short programming tasks which involved either hand executing ("tracing") a short piece of code, or writing a single sentence describing the purpose of the code. We interpret our think aloud data within a neo-Piagetian framework, demonstrating that some novices reason at the sensorimotor and preoperational stages, not at the higher concrete operational stage at which most instruction is implicitly targeted.

Reputation modelling in Citizen Science for environmental acoustic data analysis

Citizen Science projects are initiatives in which members of the general public participate in scientific research projects and perform or manage research-related tasks such as data collection and/or data annotation. Citizen Science is technologically possible and scientifically significant. However, although research teams can save time and money by recruiting general citizens to volunteer their time and skills to help data analysis, the reliability of contributed data varies a lot. Data reliability issues are significant to the domain of Citizen Science due to the quantity and diversity of people and devices involved. Participants may submit low quality, misleading, inaccurate, or even malicious data. Therefore, finding a way to improve the data reliability has become an urgent demand. This study aims to investigate techniques to enhance the reliability of data contributed by general citizens in scientific research projects especially for acoustic sensing projects. In particular, we propose to design a reputation framework to enhance data reliability and also investigate some critical elements that should be aware of during developing and designing new reputation systems.

Inside the pleasure dome : cultural tourism on Australia’s Gold Coast

The City of the Gold Coast in Queensland, Australia, will host the Commonwealth Games in 2018. In advance of the Games, the City is beginning to reposition the traditional marketing programs that were based around the four S’s- ‘sun, sand, surf and sex.’ There is a new emphasis on urban sophistication, sport, science, education and the environment. At the same time, local communities are asking for renewed attention to residential issues, particularly relating to recognising the importance of culture to the region. In this paper I explore the development of integrated computer technologies (ICTs) as a way of linking tourism, culture and place in the experience economy of the Gold Coast. The discussion is framed by theories of the post-tourist, contemporary cultural tourism and the role of mobile technologies, and the figure of the ‘referential tourist.’ An examination of stakeholder responses to changing business and social frameworks on the Gold Coast shows how discussions about a range of issues coalesce around cultural tourism. Local communities have the opportunity to engage with the new tourist as they move quickly between leisure and cultural experiences, at once connected to tourist expectations but increasingly self-directed. The Surfers Paradise Nights campaign, which is based around social media, is a case in point. This campaign aims to interest visitors in becoming a part of a familiar third place, an online space, but one that will sustain an emotive connection to the physical location and events. The paper also draws on research carried out in Brisbane, Queensland, in relation to building connections between place and culture on designated, self-directed journeys via iPhone technology. Participant responses indicate the importance of narrative to developing cultural frameworks.