Reflections for the challenges of tomorrow : where we started

Dietetics in Australia commenced in the 1930’s, inspired by formation of the profession in Britain and the United States. Almost exclusively a female profession, its roots were in nursing management in Britain and food science and home economics in the US, incorporating the principles of food preparation and supply, food and medical science, public health, management, all based on principles of social justice. Victoria employed the first dietitian in 1929, followed by NSW in 1936. Right from the start there was rivalry between the two states over the standard of training, Victoria and later Western Australia, following a college based institutional management focus and NSW, university graduates in science. Both however were committed to the hospital internship as a prelude to safe practice. Soon after, professional associations arose independently in both states, the purpose being to promote appropriate standards in education and to define the level of training required to enter the profession, though it was not until 1950 that a national association was formed. Parallel to the establishment of dietetic training and professional activities, a number of significant public health and medical science initiatives influenced the scope of dietetic practice. The Commonwealth Government commissioned dietary surveys in Australian cities as well as remote communities of Aboriginal and Papuan peoples. Newly discovered components of a healthy diet provided the beginnings of nutrition policy. Pioneer dietitians were trailblazers, with few role models. Their influence ranged across Australia to the United Nations and WHO and we can learn much from their endeavour.

The importance of understanding student learning styles in accounting degree programs

Accounting education is critical and any improvements in tertiary education of accounting students should result in better prepared graduates entering the profession. This study evaluates accounting students’ learning styles and the interaction of learning styles and teaching methodologies during degree programmes. Nine classes of accounting students (648 students) spread across four years and two degree programmes were evaluated. Students self-evaluated their learning style, pre-instruction. They were then subject to two separate teaching techniques (one active and one passive) in each course. Learning styles were then re-assessed and teaching techniques evaluated. Accounting students displayed a preference for passive learning, even those far advanced in their degrees. Furthermore, when learning styles matched teaching methods used, usefulness was assessed as high but when learning styles and teaching methods differed, usefulness deteriorated. Overall, the teaching methods were deemed more effective by active rather than passive learners. The implications are significant. To maximise educational benefit for the accounting profession, student learning styles should be assessed before designing appropriate teaching methodologies. This has resource implications which would have to be considered.

Mentoring : improving transition to practice

Nurse graduates indicate the transition from student of nursing to registered nurse (RN) is a difficult conversion. This impending change of role and accompanying higher expectations placed upon newly graduating RNs causes concern for students as their Bachelor of Nursing program nears completion. A career mentor scheme is suggested as a way to better prepare final year students for this transition. Evaluations indicate the positive impact the scheme has made on both mentors and mentees as it has enhanced their career development.

Collaborative resource development for energy efficiency education

BACKGROUND There is a growing volume of open source ‘education material’ on energy efficiency now available however the Australian government has identified a need to increase the use of such materials in undergraduate engineering education. Furthermore, there is a reported need to rapidly equip engineering graduates with the capabilities in conducting energy efficiency assessments, to improve energy performance across major sectors of the economy. In January 2013, building on several years of preparatory action-research initiatives, the former Department of Industry, Innovation, Climate Change, Science, Research and Tertiary Education (DIICCSRTE) offered $600,000 to develop resources for energy efficiency related graduate attributes, targeting Engineers Australia college disciplines, accreditation requirements and opportunities to address such requirements. PURPOSE This paper discusses a $430,000 successful bid by a university consortium led by QUT and including RMIT, UA, UOW, and VU, to design and pilot several innovative, targeted open-source resources for curriculum renewal related to energy efficiency assessments, in Australian engineering programs (2013-2014), including ‘flat-pack’, ‘media-bites’, ‘virtual reality’ and ‘deep dive’ case study initiatives. DESIGN/ METHOD The paper draws on literature review and lessons learned by the consortium partners in resource development over the last several years to discuss methods for selecting key graduate attributes and providing targeted resources, supporting materials, and innovative delivery options to assist universities deliver knowledge and skills to develop such attributes. This includes strategic industry and key stakeholders engagement. The paper also discusses processes for piloting, validating, peer reviewing, and refining these resources using a rigorous and repeatable approach to engaging with academic and industry colleagues. RESULTS The paper provides an example of innovation in resource development through an engagement strategy that takes advantage of existing networks, initiatives, and funding arrangements, while informing program accreditation requirements, to produce a cost-effective plan for rapid integration of energy efficiency within education. By the conference, stakeholder workshops will be complete. Resources will be in the process of being drafted, building on findings from the stakeholder engagement workshops. Reporting on this project “in progress” provides a significant opportunity to share lessons learned and take on board feedback and input. CONCLUSIONS This paper provides a useful reference document for others considering significant resource development in a consortium approach, summarising benefits and challenges. The paper also provides a basis for documenting the second half of the project, which comprises piloting resources and producing a ‘good practice guide’ for energy efficiency related curriculum renewal.

Good practice report : clinical teaching

Clinical experience, or experience in the ‘real world’ of practice, is a fundamental component of many health professional courses. It often involves students undertaking practical experience in clinical workplace settings, typically referred to as clinical placements, under the supervision of health professionals. Broadly speaking, the role of clinical supervisors, or teachers, is aimed at assisting students to integrate the theoretical and skills based components of the curriculum within the context of patient/client care (Erstzen et al 2009). Clinical experience also provides students with the opportunity to assimilate the attitudes, values and skills which they require to become appropriately skilled professionals in the environments in which they will eventually practise. However, clinical settings are particularly challenging learning environments for students. Unlike classroom learning, students in the clinical setting frequently find themselves involved in unplanned and often complex activities with patients and other health care providers, being supervised by a variety of clinical staff who have very different methods and styles of teaching, and negotiating bureaucratic or hierarchical structures in busy clinical workplaces where they may only be spending a limited amount of time. Kilminster et al (2007) also draw attention to tensions that may exist between the learning needs of students and the provision of quality care or need to prevent harm to the patient (e.g. Elkind et al 2007). All of these factors complicate the realisation of clinical education goals and underscore the need for effective clinical teaching practices that maximise student learning in clinical environments. This report provides a summary of work that has been achieved in relation to ALTC projects and fellowships associated with clinical teaching, and a review of scholarly publications relevant to this field. The report also makes recommendations based on issues identified and/or where further work is indicated. The projects and fellowships reviewed cover a range of discipline areas including Biology, Paramedic Practice, Clinical Exercise Physiology, Occupational Therapy, Speech Pathology, Physiotherapy, Pharmacy, Nursing and Veterinary Science. The main areas of focus cover issues related to curriculum, particularly in relation to industry expectations of ‘work-ready’ graduates and the implications for theoretical and practical, or clinical preparation; development of competency assessment tools that are nationally applicable across discipline-specific courses; and improvement of clinical learning through strategies targeting the clinical learning environment, building the teaching capacity of clinical supervisors and/or enhancing the clinical learning/teaching process.

Skill development in first year law students : an evaluation of peer assisted learning across two law units

Universities no longer equip graduates solely with the content knowledge of their discipline, but also with prospective employment skills. Professions also seek graduates who can ‘collaborate, share skills and knowledge, and communicate their ideas effectively’ (Kruck and Reif, 2001, p 37). However, as admission to university does not always guarantee that one is well equipped for the task, first year students also need guidance in the development of academic skills. This session describes two models of peer assisted learning embedded within the Torts and Legal Foundations B units at the Faculty of Law, Queensland University of Technology, and how they are used to supplement student understanding of substantive law with the development of academic and work-related skills. Student perceptions of the programs developed are considered, together with the challenges faced. Session participants will be asked to contribute to a discussion of these challenges and to offer ideas on their redress.

Does usability engineering matters for STEM education?

Technological maturity and the exponential growth of digital applications are contributing to lifestyle changes worldwide. Consequently, learning and teaching is demanding more effective sociotechnical interactions involving emerging technologies, as opposed to traditional, conventional face-to-face learning and teaching approaches. In this context, usability engineering is making significant contributions for improving computer and distance-based learning, both for learners and instructors, which have often been ignored when designing online learning and teaching applications. Usability testing is a central part of the human centered learning approach for developing sustainable STEM education from the socio-technological perspective. Our experiences with usability engineering and the impact of teaching low-cost rapid usability testing methods on knowledge translation from undergraduate to graduate courses to real-world practice (i.e. getting the methods out there in real use) are diverse and multi-modal. Our sample space has been hundreds of trained students who have learned how to do effective usability engineering in real-world situations at higher levels of realism (i.e. fidelity) and at a much lower cost than using traditional fixed usability labs. Furthermore, this low-cost rapid approach to usability engineering has been adopted by many of our graduates who are now managers, CIOs etc and who are using the methods routinely in their organizations in real world applications and scenarios. This knowledge has been used to improve design and implementation of a wide range of applications, including applications designed for teaching and learning.

Graduate careers in journalism, media and communications within and outside the sector : early career outcomes, trajectories and capabilities

This chapter addresses the radical paucity of empirical data about the career destinations of journalism, media and communications graduates from degree programs. We report findings from a study of ten years of graduates from Queensland University of Technology’s courses in journalism, media, and communication studies, using a ‘Creative Trident’ lens to analyse micro individual survey data. The study findings engage with creative labour precarity discussions, and also assertions of creative graduate oversupply suggested by national graduate outcome statistics. We describe the graduates’ employment outcomes, characterise their early career movements into and out of embedded and specialist employment, and compare the capability requirements and degree of course relevance reported by graduates employed in the different Trident segments. Given that in general the graduates in this study enjoyed very positive employment outcomes, but that there were systematic differences in reported course relevance by segment of employment and role, we also consider how university programs can best engage with the task of educating students for a surprisingly diverse range of media and communication-related occupational outcomes within and outside the creative industries.

Entrepreneurship education in non-business schools : best practice for Australian contexts of knowledge and innovation communities (Final Report)

In the current era of global economic instability, business and industry have already identified a widening gap between graduate skills and employability. An important element of this is the lack of entrepreneurial skills in graduates. This Teaching Fellowship investigated two sides of a story about entrepreneurial skills and their teaching. Senior players in the innovation commercialisation industry, a high profile entrepreneurial sector, were surveyed to gauge their needs and experiences of graduates they employ. International contexts of entrepreneurship education were investigated to explore how their teaching programs impart the skills of entrepreneurship. Such knowledge is an essential for the design of education programs that can deliver the entrepreneurial skills deemed important by industry for future sustainability. Two programs of entrepreneurship education are being implemented at QUT that draw on the best practice exemplars investigated during this Fellowship. The QUT Innovation Space (QIS) focuses on capturing the innovation and creativity of students, staff and others. The QIS is a physical and virtual meeting and networking space; a connected community enhancing the engagement of participants. The Q_Hatchery is still embryonic; but it is intended to be an innovation community that brings together nascent entrepreneurial businesses to collaborate, train and support each other. There is a niche between concept product and business incubator where an experiential learning environment for otherwise isolated ‘garage-at-home’ businesses could improve success rates. The QIS and the Q_Hatchery serve as living research laboratories to trial the concepts emerging from the skills survey. The survey of skills requirements of the innovation commercialisation industry has produced a large and high quality data set still being explored. Work experience as an employability factor has already emerged as an industry requirement that provides employee maturity. Exploratory factor analysis of the skills topics surveyed has led to a process-based conceptual model for teaching and learning higher-order entrepreneurial skills. Two foundational skills domains (Knowledge, Awareness) are proposed as prerequisites which allow individuals with a suite of early stage entrepreneurial and behavioural skills (Pre-leadership) to further leverage their careers into a leadership role in industry with development of skills around higher order elements of entrepreneurship, management in new business ventures and progressing winning technologies to market. The next stage of the analysis is to test the proposed model through structured equation modelling. Another factor that emerged quickly from the survey analysis broadens the generic concept of team skills currently voiced in Australian policy documents discussing the employability agenda. While there was recognition of the role of sharing, creating and using knowledge in a team-based interdisciplinary context, the adoption and adaptation of behaviours and attitudes of other team members of different disciplinary backgrounds (interprofessionalism) featured as an issue. Most undergraduates are taught and undertake teamwork in silos and, thus, seldom experience a true real-world interdisciplinary environment. Enhancing the entrepreneurial capacity of Australian industry is essential for the economic health of the country and can only be achieved by addressing the lack of entrepreneurial skills in graduates from the higher education system. This Fellowship has attempted to address this deficiency by identifying the skills requirements and providing frameworks for their teaching.

Course experiences, satisfaction and career intent of final year pre-registration Australian pharmacy students

Background In Australia, the profession of pharmacy has undergone many changes to adapt to the needs of the community. In recent years, concerns have been raised with evidence emerging of workforce saturation in traditional pharmacy practice sectors. It is not known how current final year pharmacy students’ perceive the different pharmacy career paths in this changing environment. Hence investigating students’ current experiences with their pharmacy course, interaction with the profession and developing an understanding of their career intentions would be an important step, as these students would make up a large proportion of future pharmacy workforce Objective The objective of this study was thus to investigate final year students’ career perspectives and the reasons for choosing pharmacy, satisfaction with this choice of pharmacy as a tertiary course and a possible future career, factors affecting satisfaction and intention of future career paths. Methods A quantitative cross sectional survey of final year students from 3 Australian universities followed by a qualitative semi-structured interview of a convenience sample of final year students from the University of Sydney. Results ‘Interest in health and medicine’ was the most important reason for choosing pharmacy (n=238). The majority of students were ‘somewhat satisfied’ with the choice of pharmacy (35.7%) as a course and possible future career. Positive associations were found between satisfaction and reasons for joining pharmacy such as ‘felt pharmacy is a good profession’ (p=0.003) while negative associations included ‘joined pharmacy as a gateway to medicine or dentistry’ (p=0.001). Quantitate and qualitative results showed the most frequent perception of community pharmacy was ‘changing’ while hospital and pharmaceutical industry was described as ‘competitive’ and ‘research’ respectively. The highest career intention was community followed by hospital pharmacy. Conclusion Complex factors including university experiences are involved in shaping students’ satisfaction and perception of career. This may relate to challenges in the community pharmacy sector, job opportunities in hospital and limited understanding of the pharmaceutical industry. The results offer insight for the profession in terms of entry into various roles and also to pharmacy educators for their roles in shaping curricula and placement experiences that attract future graduates to defined career pathways in pharmacy.

The outsourcing of accounting services and the subsequent accounting education implications

This paper examines the outsourcing of accounting services by Australian accounting firms. It considers what, if any, impact the outsourcing of accounting services may have on accounting graduates if entry level tasks normally completed by graduates are sent to offshore processing centres. This paper categorises the most important prerequisite skills requirements of new junior employees identified by accounting firms in Australia.

Developing an engaging IT degree

Curriculum renewal is a constant activity in Information Technology (IT), Information Systems (IS), Information and Communication Technology (ICT) and Computer Science (CS). Guiding documents from curriculum authorities such as AIS, IEEE and ACM assist in this process, as do those from professional societies, but these are often out of date when the institution seeks to refresh its approaches to learning, and position its graduates for emerging roles and technologies. This paper describes and discusses a curriculum renewal project undertaken in response to changing government requirements,student interests and the adoption of a learner-centric, active learning paradigm utilizing new physical collaborative learning facilities. This paper presents the stimulus for change, describes the use of reference resources and discusses the resulting degree structure, its majors and learning approaches.

Education for Australia’s information future

Digital disruption and an increasingly networked society drive rapid change in many professions and a corresponding need for change in tertiary education. Across the world, information education has, to date, prepared graduates for employment in discrete professions, such as librarianship, records management, archives, and teacher librarianship. However, contemporary information practices are less defined and are demanding of new professional skill-sets and understandings. This paper reports a study that consulted Australia’s tertiary academics about the current circumstances of information education in the academy and elicited a vision and a concern for future directions in Australian information education.

The educational design ladder : creation of a multi-discipline design thinking program

As global industries change and technology advances, traditional education systems may no longer be able to supply companies with graduates possessing an appropriate mix of skills and experience. The recent increased interest in Design Thinking as an approach to innovation has resulted in its adoption by non-design trained professionals. This necessitates a new method of teaching Design Thinking related skills and processes. This research investigates what (content) and how (assessment and learning modes) Design Thinking is being taught from fifty-one (51) selected courses across twenty-eight (28) international universities. Their approaches differ, with some universities specifically investing in design schools and programs, while others embed Design Thinking holistically throughout the university. Business, engineering and design schools are all expanding their efforts to teach students how to innovate, often through multi-disciplinary classes. This paper presents ‘The Educational Design Ladder’ a resource model, which suggests a process for the organisation and structuring of units for a multi-disciplinary Design Thinking program. The intention is to provide 21st century graduates with the right combination of skills and experience to solve workplace design problems regardless of their core discipline.

Teacher education targeting high-poverty schools : the National Exceptional Teachers for Disadvantaged Schools program

This paper examines the Exceptional Teachers for Disadvantaged Schools (ETDS) program and demonstrates how the outcomes from this teacher education model targeting high-poverty schools have been used to expand the model across other Australian universities. The paper outlines the parameters of ETDS and stresses the importance to the program of academic excellence, a modified teacher education curriculum, targeted practicums and a network of jurisdictional and school-based partnerships. The paper presents data from ETDS that demonstrates 90% of graduates have secured employed as teachers within high-poverty Australian schools. The paper concludes by outlining the impact of philanthropic funding (2 million dollars AUD) that will allow the expansion of the ETDS model into other teacher education universities across Australia.