Numerical investigation of plant tissue porosity and its influence on cellular level shrinkage during drying

Dried plant food products are increasing in demand in the consumer market, leading to continuing research to develop better products and processing techniques. Plant materials are porous structures, which undergo large deformations during drying. For any given food material, porosity and other cellular parameters have a direct influence on the level of shrinkage and deformation characteristics during drying, which involve complex mechanisms. In order to better understand such mechanisms and their interrelationships, numerical modelling can be used as a tool. In contrast to conventional grid-based modelling techniques, it is considered that meshfree methods may have a higher potential for modelling large deformations of multiphase problem domains. This work uses a meshfree based microscale plant tissue drying model, which was recently developed by the authors. Here, the effects of porosity have been newly accounted for in the model with the objective of studying porosity development during drying and its influence on shrinkage at the cellular level. For simplicity, only open pores are modelled and in order to investigate the influence of different cellular parameters, both apple and grape tissues were used in the study. The simulation results indicated that the porosity negatively influences shrinkage during drying and the porosity decreases as the moisture content reduces (when open pores are considered). Also, there is a clear difference in the deformations of cells, tissues and pores, which is mainly influenced by the cell wall contraction effects during drying.

Powering innovation through tax concessions: The changing research & development tax incentives

The changes to the R&D tax concession in 2011 were touted as the biggest reform to business innovation policy in over a decade. Three years later, as part of the 2014 Federal Budget, a reduction in the concession rates was announced. While the most recent of the pro-posed changes are designed to align with the reduction in company tax rate, the Australian Federal Government also indicated that the gain to revenue from the reduction in the incentive scheme will be redirected by the Government to repair the Budget and fund policy priori-ties. The consequence is that the R&D concessions, while designed to encourage innovation, are clearly linked with the tax system. As such, the first part of this article considers whether the R&D concession is a changing tax for changing times. Leading on from part one, this article also addresses a second question of ‘what’s tax got to do with it’? To answer this question, the article argues that, rather than ever being substantive tax reform, the constantly changing measures simply alter the criteria and means by which companies become eligible for a Federal Government subsidy for qualifying R&D activity, whatever that amount is. It further argues that when considered as part of the broader innovation agenda, all R&D tax concessions should be evaluated as a government spending program in the same way as any direct spending on innovation. When this is done, the tax regime is arguably merely the administrative policy instrument by which the subsidy is delivered. However, this may not be best practice to distribute those funds fairly, efficiently, and without distortion, while at the same time maintaining adequate government control and accountability. Finally, in answering the question of ‘what’s tax got to do with it?’ the article concludes that the answer is: very little.

Understanding expectations with multiple controllers in an augmented reality videogame

Player experiences and expectations are connected. The presumptions players have about how they control their gameplay interactions may shape the way they play and perceive videogames. A successfully engaging player experience might rest on the way controllers meet players' expectations. We studied player interaction with novel controllers on the Sony PlayStation Wonderbook, an augmented reality (AR) gaming system. Our goal was to understand player expectations regarding game controllers in AR game design. Based on this preliminary study, we propose several interaction guidelines for hybrid input from both augmented reality and physical game controllers

Decentralised Communication in Autonomous Agent Swarms

Communication and information diffusion are typically difficult in situations where centralised structures may become unavailable. In this context, decentralised communication based on epidemic broadcast becomes essential. It can be seen as an opportunity-based flooding for message broadcasting within a swarm of autonomous agents, where each entity tries to share the information it possesses with its neighbours. As an example of applications for such a system, we present simulation results where agents have to coordinate to map an unknown area.

National Charities

Using the first Annual Information Statements (AIS) filed with the Australian Charities and Not-for-profits Commission (ACNC), this factsheet describes national charities that operate across state and territory borders.

Emergence in interactive artistic visualization

This research draws on theories of emergence to inform the creation of an artistic and direct visualization. This is an interactive artwork and drawing tool for creative participant experiences. Emergence is characteristically creative and many different models of emergence exist. It is therefore possible to effect creativity through the application of emergence mechanisms from these different disciplines. A review of theories of emergence and examples of visualization in the arts, is provided. An art project led by the author is then discussed in this context. This project, Iterative Intersections, is a collaboration with community artists from Cerebral Palsy League. It has resulted in a number of creative outcomes including the interactive art application, Of me with me. Analytical discussion of this work shows how its construction draws on aspects of experience design, fractal and emergent theory to effect perceptual emergence and creative experience as well as to facilitate self-efficacy.

A virtual environment for medical radiation collaborative learning

Asoftware-based environment was developed to provide practical training in medical radiation principles and safety. The Virtual Radiation Laboratory application allowed students to conduct virtual experiments using simulated diagnostic and radiotherapy X-ray generators. The experiments were designed to teach students about the inverse square law, half value layer and radiation protection measures and utilised genuine clinical and experimental data. Evaluation of the application was conducted in order to ascertain the impact of the software on students’ understanding, satisfaction and collaborative learning skills and also to determine potential further improvements to the software and guidelines for its continued use. Feedback was gathered via an anonymous online survey consisting of a mixture of Likert-style questions and short answer open questions. Student feedback was highly positive with 80 % of students reporting increased understanding of radiation protection principles. Furthermore 72 % enjoyed using the software and 87 %of students felt that the project facilitated collaboration within small groups. The main themes arising in the qualitative feedback comments related to efficiency and effectiveness of teaching, safety of environment, collaboration and realism. Staff and students both report gains in efficiency and effectiveness associated with the virtual experiments. In addition students particularly value the visualisation of ‘‘invisible’’ physical principles and increased opportunity for experimentation and collaborative problembased learning. Similar ventures will benefit from adopting an approach that allows for individual experimentation while visualizing challenging concepts.

All horticultural factsheets (Part 1)

Teaching Resource material prepared for DLB320 Landscape Horticulture, available to wider group of users via ePrints.

Collaborative learning model of infrastructure construction: A capability perspective

Purpose Performance heterogeneity between collaborative infrastructure projects is typically examined by considering procurement systems and their governance mechanisms at static points in time. The literature neglects to consider the impact of dynamic learning capability, which is thought to reconfigure governance mechanisms over time in response to evolving market conditions. This conceptual paper proposes a new model to show how continuous joint learning of participant organisations improves project performance. Design/methodology/approach There are two stages of conceptual development. In the first stage, the management literature is analysed to explain the Standard Model of dynamic learning capability that emphasises three learning phases for organisations. This Standard Model is extended to derive a novel Circular Model of dynamic learning capability that shows a new feedback loop between performance and learning. In the second stage, the construction management literature is consulted, adding project lifecycle, stakeholder diversity and three organisational levels to the analysis, to arrive at the Collaborative Model of dynamic learning capability. Findings The Collaborative Model should enable construction organisations to successfully adapt and perform under changing market conditions. The complexity of learning cycles results in capabilities that are imperfectly imitable between organisations, explaining performance heterogeneity on projects. Originality/value The Collaborative Model provides a theoretically substantiated description of project performance, driven by the evolution of procurement systems and governance mechanisms. The Model’s empirical value will be tested in future research.

Reconstruction of a multi-vent kimberlite eruption from deposit and host rock characteristics: Jericho kimberlite, Nunavut, Canada

The Jericho kimberlite (173.1. ±. 1.3. Ma) is a small (~. 130. ×. 70. m), multi-vent system that preserves products from deep (>. 1. km?) portions of kimberlite vents. Pit mapping, drill core examination, petrographic study, image analysis of olivine crystals (grain size distributions and shape studies), and compositional and mineralogical studies, are used to reconstruct processes from near-surface magma ascent to kimberlite emplacement and alteration. The Jericho kimberlite formed by multiple eruptions through an Archean granodiorite batholith that was overlain by mid-Devonian limestones ~. 1. km in thickness. Kimberlite magma ascended through granodiorite basement by dyke propagation but ascended through limestone, at least in part, by locally brecciating the host rocks. After the first explosive breakthrough to surface, vent deepening and widening occurred by the erosive forces of the waxing phase of the eruption, by gravitationally induced failures as portions of the vent margins slid into the vent and, in the deeper portions of the vent (>. 1. km), by scaling, as thin slabs burst from the walls into the vent. At currently exposed levels, coherent kimberlite (CK) dykes (<. 40. cm thick) are found to the north and south of the vent complex and represent the earliest preserved in-situ products of Jericho magmatism. Timing of CK emplacement on the eastern side of the vent complex is unclear; some thick CK (15-20. m) may have been emplaced after the central vent was formed. Explosive eruptive products are preserved in four partially overlapping vents that are roughly aligned along strike with the coherent kimberlite dyke. The volcaniclastic kimberlite (VK) facies are massive and poorly sorted, with matrix- to clast-supported textures. The VK facies fragmented by dry, volatile-driven processes and were emplaced by eruption column collapse back into the volcanic vents. The first explosive products, poorly preserved because of partial destruction by later eruptions, are found in the central-east vent and were formed by eruption column collapse after the vent was largely cleared of country rock debris. The next active vent was either the north or south vent. Collapse of the eruption column, linked to a vent widening episode, resulted in coeval avalanching of pipe margin walls into the north vent, forming interstratified lenses of country rock-rich boulder breccias in finer-grained volcaniclastic kimberlite. South vent kimberlite has similar characteristics to kimberlite of the north vent and likely formed by similar processes. The final eruptive phase formed olivine-rich and moderately sorted deposits of the central vent. Better sorting is attributed to recycling of kimberlite debris by multiple eruptions through the unconsolidated volcaniclastic pile and associated collapse events. Post-emplacement alteration varies in intensity, but in all cases, has overprinted the primary groundmass and matrix, in CK and VK, respectively. Erosion has since removed all limestone cover.

The influence of family history of hypertension on disease prevalence and associated metabolic risk factors among Sri Lankan adults

Background Hypertension is a major contributor to the global non-communicable disease burden. Family history is an important non-modifiable risk factor for hypertension. The present study aims to describe the influence of family history (FH) on hypertension prevalence and associated metabolic risk factors in a large cohort of South Asian adults, from a nationally representative sample from Sri Lanka. Methods A cross-sectional survey among 5,000 Sri Lankan adults, evaluating FH at the levels of parents, grandparents, siblings and children. A binary logistic regression analysis was performed in all patients with ‘presence of hypertension’ as dichotomous dependent variable and using family history in parents, grandparents, siblings and children as binary independent variables. The adjusted odds ratio controlling for confounders (age, gender, body mass index, diabetes, hyperlipidemia and physical activity) are presented below. Results In all adults the prevalence of hypertension was significantly higher in patients with a FH (29.3 %, n = 572/1951) than those without (24.4 %, n = 616/2530) (p < 0.001). Presence of a FH significantly increased the risk of hypertension (OR:1.29; 95 % CI:1.13-1.47), obesity (OR:1.36; 95 % CI: 1.27–1.45), central obesity (OR:1.30; 95 % CI 1.22–1.40) and metabolic syndrome (OR:1.19; 95 % CI: 1.08–1.30). In all adults presence of family history in parents (OR:1.28; 95 % CI: 1.12–1.48), grandparents (OR:1.34; 95 % CI: 1.20–1.50) and siblings (OR:1.27; 95 % CI: 1.21–1.33) all were associated with significantly increased risk of developing hypertension. Conclusions Our results show that the prevalence of hypertension was significantly higher in those with a FH of hypertension. FH of hypertension was also associated with the prevalence of obesity, central obesity and metabolic syndrome. Individuals with a FH of hypertension form an easily identifiable group who may benefit from targeted interventions.

Water transformed: Sustainable water solutions for climate change adaptation

This online textbook provides free access to a comprehensive education and training package that brings together the knowledge of how countries, specifically Australia, can adapt to climate change. This resource has been developed formally as part of the Federal Government’s Department of Climate Change’s Climate Change Adaptation Professional Skills program.

Patent-busting: The public patent foundation, gene patents and the Seed Wars

This chapter considers the Public Patent Foundation as a novel institution in the patent framework. It contends that such a model can play a productive role in challenging the validity of high-profile patents; working as an amicus curiae in significant court cases; and also promoting patent law reform. However, there are limits to the ‘patent-busting’ of the Foundation. The not-for-profit legal services organization has only had the time and resources to challenge a number of noteworthy patents. Other jurisdictions – such as Australia – lack such public-spirited "patent-busting" entities. This chapter considers a number of key disputes involving the Public Patent Foundation. Part I examines the role of the Public Patent Foundation in the landmark dispute over Myriad Genetics’ patents in respect of breast cancer and ovarian cancer. Part II considers the role of the Public Patent Foundation in litigation between organic farmers and Monsanto. Part III examines the role of the Public Patent Foundation in larger debates about patent law reform in the United States – particularly looking at the Leahy-Smith America Invents Act 2011 (US). The conclusion contends that the patent-busting model of the Public Patent Foundation should be emulated in respect of other technological fields, and other jurisdictions – such as Australia. The initiative could also be productively applied to other forms of intellectual property – such as trade mark law, designs law, plant breeders’ rights, plant breeders’ rights, and access to genetic resources.