Broadening the focus : the case for lifestyle journalism as a field of scholarly inquiry

This introduction to the special issue outlines the case for an increased focus on studying lifestyle journalism, an area of journalism which, despite its rapid rise over recent decades, has not received much attention from scholars in journalism studies. Criticised for being antithetical to public interest and watchdog notions of journalism, lifestyle journalism is still ridiculed by some as being unworthy of being associated with the term journalism. However, in outlining the field's development and a critique of definitions of journalism, this paper argues that there are a number of good reasons for broadening the focus. In fact, lifestyle journalism?here defined as a distinct journalistic field that primarily addresses its audiences as consumers, providing them with factual information and advice, often in entertaining ways, about goods and services they can use in their daily lives?has much to offer for scholarly inquiry and is of increasing relevance for society.

Carbon nanotube composite sensor for structural health monitoring of bridge structures

Bridges are important infrastructures of all nations and are required for transportation of goods as well as human. A catastrophic failure can result in loss of lives and enormous financial hardship to the nation. Although various kinds of sensors are now available to monitor the health of the structures due to corrosion, they do not provide permanent and long term measurements. This paper investigates the fabrication of Carbon Nanotube (CNT) based composite sensors for corrosion detection of structures. Multi-wall CNT (MWCNT)/Nafion composite sensors were fabricated to evaluate their electrical properties for corrosion detection. The test specimens were subjected to real life corrosion experimental tests and the results confirm that the electrical resistance of the sensor electrode was dramatically changed due to corrosion.

CSR communication and legitimacy : an institutional and rhetorical perspective

This study drew on the notions of institutional theory, legitimacy, and rhetoric, and explored propositions drawn from these concepts to consider the why and how of corporate social responsibility (CSR) communication. In doing so, this thesis found that there was often a disconnect between why the organisations were communicating about CSR activities in their reports and how the organisations were communicating about these activities.

Mapping, monitoring, and modelling of hazardous waste sites

Management of the industrial nations' hazardous waste is a current and exponentially increasing, global threatening situation. Improved environmental information must be obtained and managed concerning the current status, temporal dynamics and potential future status of these critical sites. To test the application of spatial environmental techniques to the problem of hazardous waste sites, as Superfund (CERCLA) test site was chosen in an industrial/urban valley experiencing severe TCE, PCE, and CTC ground water contamination. A paradigm is presented for investigating spatial/environmental tools available for the mapping, monitoring and modelling of the environment and its toxic contaminated plumes. This model incorporates a range of technical issues concerning the collection of data as augmented by remotely sensed tools, the format and storage of data utilizing geographic information systems, and the analysis and modelling of environment through the use of advance GIS analysis algorithms and geophysic models of hydrologic transport including statistical surface generation. This spatial based approach is evaluated against the current government/industry standards of operations. Advantages and lessons learned of the spatial approach are discussed.

Megaprojects, Affected communities and sustainability decision making

Increasing scrutiny from the wider community is contributing to a shift towards the delivery and operation of major projects that meets and maintains the sustainability priorities of the community. This is especially significant for large economic projects which have a global track record of social benefit shortfalls, cost overruns, and underestimation of risks. Major industrial and infrastructure projects that cost more than US$1 billion are typically called mega-projects. Globally, investment in mega-projects has exceeded $10 trillion in the last ten years. With so many projects in the pipeline -and many taking place in emerging economies – the effectiveness of the sustainability decision making process is particularly important. The purpose of this paper is to examine how the existing sustainability decision making processes and strategies address the potential challenges facing communities affected by mega-projects. It highlights issues with current operational level approaches to social sustainability assessment at the project level, and argues that to improve accountability and transparency of project outcomes, positive externalities that flow from goods and services provided by the social and cultural systems of the community must be incorporated into decision making.

Navigating the future of roads – considering potential impacts of environmental and social trends on road infrastructure

Providing mobility corridors for communities, enabling freight networks to transport goods and services, and a pathway for emergency services and disaster relief operations, roads are a vital component of our societal system. In the coming decades, a number of modern issues will face road agencies as a result of climate change, resource scarcity and energy related challenges that will have implications for society. To date, these issues have been discussed on a case by case basis, leading to a fragmented approach by state and federal agencies in considering the future of roads – with potentially significant cost and risk implications. Within this context, this paper summarises part of a research project undertaken within the ‘Greening the Built Environment’ program of the Sustainable Built Environment National Research Centre (SBEnrc, Australia), which identified key factors or ‘trends’ affecting the future of roads and key strategies to ensure that road agencies can continue to deliver road infrastructure that meets societal needs in an environmentally appropriate manner. The research was conducted over two years, including a review of academic and state agency literature, four stakeholder workshops in Western Australia and Queensland, and industry consultation. The project was supported financially and through peer review and contribution, by Main Roads Western Australia, QLD Department of Transport and Main Roads, Parsons Brinckerhoff, John Holland Group, and the Australian Green Infrastructure Council (AGIC). The project highlighted several potential trends that are expected to affect road agencies in the future, including predicted resource and materials shortages, increases in energy and natural resources prices, increased costs related to greenhouse gas emissions, changing use and expectations of roads, and changes in the frequency and intensity of weather events. Exploring the implications of these potential futures, the study then developed a number of strategies in order to prepare transport agencies for the associated risks that such trends may present. An unintended outcome of the project was the development of a process for enquiring into future scenarios, which will be explored further in Stage 2 of the project (2013-2014). The study concluded that regardless of the type and scale of response by the agency, strategies must be holistic in approach, and remain dynamic and flexible.

Free-riding, cooperation, and 'peaceful revolutions' in copyright

Modern copyright law is based on the inescapable assumption that users, given the choice, will free-ride rather than pay for access. In fact, many consumers of cultural works – music, books, films, games, and other works – fundamentally want to support their production. It turns out that humans are motivated to support cultural production not only by extrinsic incentives, but also by social norms of fairness and reciprocity. This article explains how producers across the creative industries have used this insight to develop increasingly sophisticated business models that rely on voluntary payments (including pay-what-you-want schemes) to fund their costs of production. The recognition that users are not always free-riders suggests that current policy approaches to copyright are fundamentally flawed. Because social norms are so important in consumer motivations, the perceived unfairness of the current copyright system undermines the willingness of people to pay for access to cultural goods. While recent copyright reform debate has focused on creating stronger deterrence through enforcement, increasing the perceived fairness and legitimacy of copyright law is likely to be much more effective. The fact that users will sometimes willingly support cultural production also challenges the economic raison d'être of copyright law. This article demonstrates how 'peaceful revolutions' are flipping conventional copyright models and encouraging free-riding through combining incentives and prosocial norms. Because they provide a means to support production without limiting the dissemination of knowledge and culture, there is good reason to believe that these commons-based systems of cultural production can be more efficient, more fair, and more conducive to human flourishing than conventional copyright systems. This article explains what we know about free-riding so far and what work remains to be done to understand the viability and importance of cooperative systems in funding cultural production.

Reducing complexity of large EPCs

Business processes are an important instrument for understanding and improving how companies provide goods and services to customers. Therefore, many companies have documented their business processes well, often in the Event-driven Process Chains (EPC). Unfortunately, in many cases the resulting EPCs are rather complex, so that the overall process logic is hidden in low level process details. This paper proposes abstraction mechanisms for process models that aim to reduce their complexity, while keeping the overall process structure. We assume that functions are marked with efforts and splits are marked with probabilities. This information is used to separate important process parts from less important ones. Real world process models are used to validate the approach.

Exploring the scope of gene patents through new levels of transparency

As the global intellectual property (IP) system grows and now impacts virtually all citizens, it is crucial that the means to understand these rights and their teachings, as well as their implications and scope become global public goods. To do so requires not only that the primary data is available freely and openly in a standardized and re-useable form, but that tools to visualize, analyse and model that data are similarly open and free public goods, adaptable to diverse needs and uses; this we call ‘transparency’.

Creative Work Beyond the Creative Industries: An Introduction

Creative occupations exist across the entire economy. The creative worker’s habitus cannot be discovered by looking only in film studios, games companies or artist’s garrets. Work practices, evolved through the traditions of the creative and performing arts, are now deployed to create new services and products across all sectors, to develop process innovations, and to change the distribution thereof. Yet the bulk of academic study of creative work (both functionalist and critical), as well as the content of higher/further professional education programs and everyday understanding of creative workers, focuses on one subset of the Creative Industries: those involved in the production of cultural goods or services (film, television, music etc.) for consumption by the general public. And further, the bulk of existing academic work focuses on those creative workers employed in cultural production industries. However, as recent work has shown, this focus misses both the large (and increasing) number of creative workers embedded in industries beyond the core Creative Industries (for example, manufacturing, banking, mining) and those creative workers and firms that supply services to business as well as to the general public, such as architects, technical writers, and graphic designers (see Cunningham 2013; Potts and Cunningham 2008; Potts, Cunningham, Hartley and Omerod 2008). This book focuses on this subset of very important, and yet under-recognized creative workers: embedded creative workers and providers of creative services into other sectors of the economy, as indicated in the following taxonomy (Figure 1.1), which juxtaposes occupation and industry sector...

Embedded creatives in Australian healthcare: An update

The contribution of creative occupations to Australian healthcare was examined using a mix of statistics and case studies. Creative occupations were found to be making widespread contributions in healthcare, in particular, to the development and delivery of healthcare goods and services, the initial training and ongoing professionalism of doctors and nurses and the effective functioning of healthcare buildings. Within most facets of healthcare, increasing employment over the period examined indicated that these contributions were growing. Key functions that creative activities addressed were information management and analysis and making complex information comprehensible, assisting communication and reducing psycho-social and distance-mediated barriers, and improving the efficiency and effectiveness of services.

The Marrakesh Treaty could bring the world’s books to the blind

An estimated 285 million people worldwide are visually impaired. Some 90% of those live in developing nations, where less than 1% of the world’s books are available in a form they can read. In developed countries, the situation is only marginally better: only around 7% of the world’s books are accessible to print-disabled people. The right to read is part of our basic human rights. Access to the written word is crucial to allow people to fully participate in society. It’s important for education, political involvement, success in the workplace, scientific progress and, not least, creative play and leisure. Equal access to books and other cultural goods is also required by international law. The technology now exists to deliver books in accessible electronic forms to people much more cheaply than printing and shipping bulky braille copies or books on tape. Electronic books can be read with screen readers and refreshable braille devices, or printed into large print or braille if needed. Now that we have this technology, what’s been referred to as the global “book famine” is a preventable tragedy.

Further investigations of framing effects on cooperative choices in a provision point mechanism

We investigate whether framing effects of voluntary contributions are significant in a provision point mechanism. Our results show that framing significantly affects individuals of the same type: cooperative individuals appear to be more cooperative in the public bads game than in the public goods game, whereas individualistic subjects appear to be less cooperative in the public bads game than in the public goods game. At the aggregate level of pooling all individuals, the data suggests that framing effects are negligible, which is in contrast with the established result.

Compensation for environmental services and intergovernmental fiscal transfers : the case of India

This paper studies mechanisms to compensate local government for the public provision of environmental services using the theory of optimal fiscal transfers in India. Especially, we analyzed the role of intergovernmental fiscal transfers in achieving the environmental goal. Simply assigning the functions at appropriate levels does not ensure optimal provision of environmental services. Optimality in resource allocation could be achieved by combining the assignment system with an appropriate compensation mechanism. Intergovernmental fiscal transfers would be a suitable mechanism for compensating the local governments and help in internalizing the spillover effects of providing environmental public goods. Illustrations are also provided for India.

Global outsourcing, production and logistics

Supply chains are the core of most industrial networks in which your business operates. They provide the pipeline through which the products and services flow from supplier to customer across each element within the business activity system. Global supply chain relationships have become the basis for many industries with an international network of firms engaged in the supply of goods and services that must be produced to quality standards in one country and delivered just-in-time for assembly or integration into further production processes in another country, frequently many thousands of miles apart. This topic examines the nature of supply chain management and their role in strategic networking. The previous learning tasks have focused on having the correct internal mechanism to effectively manage the inputs and outputs of the organisation by implementing an effective and transparent management system. This learning task takes a look at how management intent strategy and innovation are used to measure the external factors that influence the overall performance of the organisation and develop new strategies by understanding the business cycle and the people within your market environment.