Large-scale interlaboratory study to develop, analytically validate and apply highly multiplexed, quantitative peptide assays to measure cancer-relevant proteins in plasma

There is an increasing need in biology and clinical medicine to robustly and reliably measure tens-to-hundreds of peptides and proteins in clinical and biological samples with high sensitivity, specificity, reproducibility and repeatability. Previously, we demonstrated that LC-MRM-MS with isotope dilution has suitable performance for quantitative measurements of small numbers of relatively abundant proteins in human plasma, and that the resulting assays can be transferred across laboratories while maintaining high reproducibility and quantitative precision. Here we significantly extend that earlier work, demonstrating that 11 laboratories using 14 LC-MS systems can develop, determine analytical figures of merit, and apply highly multiplexed MRM-MS assays targeting 125 peptides derived from 27 cancer-relevant proteins and 7 control proteins to precisely and reproducibly measure the analytes in human plasma. To ensure consistent generation of high quality data we incorporated a system suitability protocol (SSP) into our experimental design. The SSP enabled real-time monitoring of LC-MRM-MS performance during assay development and implementation, facilitating early detection and correction of chromatographic and instrumental problems. Low to sub-nanogram/mL sensitivity for proteins in plasma was achieved by one-step immunoaffinity depletion of 14 abundant plasma proteins prior to analysis. Median intra- and inter-laboratory reproducibility was <20%, sufficient for most biological studies and candidate protein biomarker verification. Digestion recovery of peptides was assessed and quantitative accuracy improved using heavy isotope labeled versions of the proteins as internal standards. Using the highly multiplexed assay, participating laboratories were able to precisely and reproducibly determine the levels of a series of analytes in blinded samples used to simulate an inter-laboratory clinical study of patient samples. Our study further establishes that LC-MRM-MS using stable isotope dilution, with appropriate attention to analytical validation and appropriate quality c`ontrol measures, enables sensitive, specific, reproducible and quantitative measurements of proteins and peptides in complex biological matrices such as plasma.

'It's Africa. It's Arizona. It's Antarctica. It's Afghanistan. Actually, it's Alberta' : Marketing locations to film producers

This chapter begins by outlining the dynamics of contemporary international film production and the inherent tension between ‘design interest’ and ‘location interest’. A history of the promotion of particular places as filmmaking locations (including Hollywood) is presented, prior to the establishment of the first film commissions. The creation of international associations and their role in professionalization, norm setting and the standardization of offerings and activities, is then described. The chapter concludes with a discussion of commissions’ work, the emergent discourse of ‘film friendliness,’ and the differences between location marketing and other kinds of destination marketing.

A vibrational spectroscopic study of the anhydrous phosphate mineral sidorenkite Na3Mn(PO4)(CO3)

Sidorenkite is a very rare low-temperature hydrothermal mineral, formed very late in the crystallization of hyperagpaitic pegmatites in a differentiated alkalic massif (Mt. Alluaiv, Kola Peninsula, Russia). Sidorenkite Na3Mn(PO4)(CO3) is a phosphate–carbonate of sodium and manganese. Such a formula with two oxyanions lends itself to vibrational spectroscopy. The sharp Raman band at 959 cm−1 and 1012 cm−1 are assigned to the PO43− stretching modes, whilst the Raman bands at 1044 cm−1 and 1074 cm−1 are attributed to the CO32− stretching modes. It is noted that no Raman bands at around 800 cm−1 for sidorenkite were observed. The infrared spectrum of sidorenkite shows a quite intense band at 868 cm−1 with other resolved component bands at 850 and 862 cm−1. These bands are ascribed to the CO32− out-of-plane bend (ν2) bending mode. The series of Raman bands at 622, 635, 645 and 704 cm−1 are assigned to the ν4 phosphate bending modes. The observation of multiple bands supports the concept of a reduction in symmetry of the carbonate anion from D3h or even C2v.

Estimating the burden of disease attributable to iron deficiency anaemia in South Africa in 2000

OBJECTIVES To estimate the extent of iron deficiency anaemia (IDA) among children aged 0 - 4 years and pregnant women aged 15 - 49 years, and the burden of disease attributed to IDA in South Africa in 2000. DESIGN The comparative risk assessment (CRA) methodology of the World Health Organization (WHO) was followed using local prevalence and burden estimates. IDA prevalence came from re-analysis of the South African Vitamin A Consultative Group study in the case of the children, and from a pooled estimate from several studies in the case of the pregnant women (haemoglobin level < 11 g/dl and ferritin level < 12 microg/l). Monte Carlo simulation-modelling was used for the uncertainty analysis. SETTING South Africa. SUBJECTS Children under 5 years and pregnant women 15 - 49 years. OUTCOME MEASURES Direct sequelae of IDA, maternal and perinatal deaths and disability-adjusted life years (DALYs) from mild mental disability related to IDA. Results. It is estimated that 5.1% of children and 9 - 12% of pregnant women had IDA and that about 7.3% of perinatal deaths and 4.9% of maternal deaths were attributed to IDA in 2000. Overall, about 174,976 (95% uncertainty interval 150,344 - 203,961) healthy years of life lost (YLLs), or between 0.9% and 1.3% of all DALYs in South Africa in 2000, were attributable to IDA. CONCLUSIONS This first study in South Africa to quantify the burden from IDA suggests that it is a less serious public health problem in South Africa than in many other developing countries. Nevertheless, this burden is preventable, and the study highlights the need to disseminate the food-based dietary guidelines formulated by the National Department of Health to people who need them and to monitor the impact of the food fortification programme.

Using academagogy to meet the needs of millennial learners: A comparative case study

Higher education institutions across the world are experiencing a new generation of students, known as millennial learners. They are more technologically literate and digitally connected than previous generations of learners. To meet the teaching and learning needs of these learners, we must offer more deliberate and meaningful learning experiences and opportunities, where students can see the connections between new material and their own experiences and real world applications – an academagogic approach. This study compares the implementation of academagogy for two different groups of millennial learners – one a traditional face-to-face undergraduate Engineering unit, and the other a mixed-mode (online and face-to-face) undergraduate Design unit. The units are discussed in terms of their student evaluation results, both qualitative and quantitative, and in terms of their academic outcomes for students. Conclusions are drawn about the applicability of academagogy as a heuristic for improving teaching and learning across disciplines, as well as its strengths and limitations in terms of student results.

Difficulties in distinguishing coherent from fragmental kimberlite: A case study of the Muskox pipe (Northern Slave Province, Nunavut, Canada)

Kimberlite drill core from the Muskox pipe (Northern Slave Province, Nunavut, Canada) highlights the difficulties in distinguishing coherent from fragmental kimberlite and assessing the volcanological implications of the apparent gradational contact between the two facies. Using field log data, petrography, and several methods to quantify crystal and xenolith sizes and abundances, the pipe is divided into two main facies, dark-coloured massive kimberlite (DMK) and light-coloured fragmental kimberlite (LFK). DMK is massive and homogeneous, containing country-rock lithic clasts (~ 10%) and olivine macrocrysts (~ 15%) set in a dark, typically well crystallised, interstitial medium containing abundant microphenocrysts of olivine (~ 15%), opaques and locally monticellite, all of which are enclosed by mostly serpentine. In general, LFK is also massive and structureless, containing ~ 20% country-rock lithic clasts and ~ 12% olivine macrocrysts. These framework components are supported in a matrix of serpentinized olivine microphenocrysts (10%), microlites of clinopyroxene, and phlogopite, all of which are enclosed by serpentine. The contact between DMK and LFK facies is rarely sharp, and more commonly is gradational (from 5 cm to ~ 10 m). The contact divides the pipe roughly in half and is sub-vertical with an irregular shape, locally placing DMK facies both above and below the fragmental rocks. Most features of DMK are consistent with a fragmental origin, particularly the crystal- and xenolith-rich nature (~ 55-65%), but there are some similarities with rocks described as coherent kimberlite in the literature. We discuss possible origins of gradational contacts and consider the significance for understanding the origin of the DMK facies, with an emphasis on the complications of alteration overprinting of primary textures.

Some major problems with existing models and terminology associated with kimberlite pipes from a volcanological perspective, and some suggestions

Five significant problems hinder advances in understanding of the volcanology of kimberlites: (1) kimberlite geology is very model driven; (2) a highly genetic terminology drives deposit or facies interpretation; (3) the effects of alteration on preserved depositional textures have been grossly underestimated; (4) the level of understanding of the physical process significance of preserved textures is limited; and, (5) some inferred processes and deposits are not based on actual, modern volcanological processes. These issues need to be addressed in order to advance understanding of kimberlite volcanological pipe forming processes and deposits. The traditional, steep-sided southern African pipe model (Class I) consists of a steep tapering pipe with a deep root zone, a middle diatreme zone and an upper crater zone (if preserved). Each zone is thought to be dominated by distinctive facies, respectively: hypabyssal kimberlite (HK, descriptively called here massive coherent porphyritic kimberlite), tuffisitic kimberlite breccia (TKB, descriptively here called massive, poorly sorted lapilli tuff) and crater zone facies, which include variably bedded pyroclastic kimberlite and resedimented and reworked volcaniclastic kimberlite (RVK). Porphyritic coherent kimberlite may, however, also be emplaced at different levels in the pipe, as later stage intrusions, as well as dykes in the surrounding country rock. The relationship between HK and TKB is not always clear. Sub-terranean fluidisation as an emplacement process is a largely unsubstantiated hypothesis; modern in-vent volcanological processes should initially be considered to explain observed deposits. Crater zone volcaniclastic deposits can occur within the diatreme zone of some pipes, indicating that the pipe was largely empty at the end of the eruption, and subsequently began to fill-in largely through resedimentation and sourcing of pyroclastic deposits from nearby vents. Classes II and III Canadian kimberlite models have a more factual, descriptive basis, but are still inadequately documented given the recency of their discovery. The diversity amongst kimberlite bodies suggests that a three-model classification is an over-simplification. Every kimberlite is altered to varying degrees, which is an intrinsic consequence of the ultrabasic composition of kimberlite and the in-vent context; few preserve original textures. The effects of syn- to post-emplacement alteration on original textures have not been adequately considered to date, and should be back-stripped to identify original textural elements and configurations. Applying sedimentological textural configurations as a guide to emplacement processes would be useful. The traditional terminology has many connotations about spatial position in pipe and of process. Perhaps the traditional terminology can be retained in the industrial situation as a general lithofacies-mining terminological scheme because it is so entrenched. However, for research purposes a more descriptive lithofacies terminology should be adopted to facilitate detailed understanding of deposit characteristics, important variations in these, and the process origins. For example every deposit of TKB is different in componentry, texture, or depositional structure. However, because so many deposits in many different pipes are called TKB, there is an implication that they are all similar and that similar processes were involved, which is far from clear.

A new approach to kimberlite facies terminology using a revised general approach to the nomenclature of all volcanic rocks and deposits: Descriptive to genetic

Although kimberlite pipes/bodies are usually the remains of volcanic vents, in-vent deposits, and subvolcanic intrusions, the terminology used for kimberlite rocks has largely developed independently of that used in mainstream volcanology. Existing kimberlite terminology is not descriptive and includes terms that are rarely used, used differently, and even not used at all in mainstream volcanology. In addition, kimberlite bodies are altered to varying degrees, making application of genetic terminology difficult because original components and depositional textures are commonly masked by alteration. This paper recommends an approach to the terminology for kimberlite rocks that is consistent with usage for other volcanic successions. In modern terrains the eruption and emplacement origins of deposits can often be readily deduced, but this is often not the case for old, variably altered and deformed rock successions. A staged approach is required whereby descriptive terminology is developed first, followed by application of genetic terminology once all features, including the effects of alteration on original texture and depositional features, together with contact relationships and setting, have been evaluated. Because many volcanic successions consist of both primary volcanic deposits as well as volcanic sediments, terminology must account for both possibilities.

Regulating ride-sharing in the peer economy

The rise of the peer economy poses complex new regulatory challenges for policy-makers. The peer economy, typified by services like Uber and AirBnB, promises substantial productivity gains through the more efficient use of existing resources and a marked reduction in regulatory overheads. These services are rapidly disrupting existing established markets, but the regulatory trade-offs they present are difficult to evaluate. In this paper, we examine the peer economy through the context of ride-sharing and the ongoing struggle over regulatory legitimacy between the taxi industry and new entrants Uber and Lyft. We first sketch the outlines of ride-sharing as a complex regulatory problem, showing how questions of efficiency are necessarily bound up in questions about levels of service, controls over pricing, and different approaches to setting, upholding, and enforcing standards. We outline the need for data-driven policy to understand the way that algorithmic systems work and what effects these might have in the medium to long term on measures of service quality, safety, labour relations, and equality. Finally, we discuss how the competition for legitimacy is not primarily being fought on utilitarian grounds, but is instead carried out within the context of a heated ideological battle between different conceptions of the role of the state and private firms as regulators. We ultimately argue that the key to understanding these regulatory challenges is to develop better conceptual models of the governance of complex systems by private actors and the available methods the state has of influencing their actions. These struggles are not, as is often thought, struggles between regulated and unregulated systems. The key to understanding these regulatory challenges is to better understand the important regulatory work carried out by powerful, centralised private firms – both the incumbents of existing markets and the disruptive network operators in the peer-economy.

The last taboo: Patenting human beings

This article considers the efforts of the Australian Law Reform Commission to clarify the meaning of section 18(2) of the Australian Patents Act 1990 (Cth): ’Human beings and the biological processes for their generation are not patentable inventions.' It provides a critique of the proposals of the Commission with respect to patent law and stem cell research. The Commission has recommended that IP Australia should develop examination guidelines to explain how the criteria for patentability apply to inventions involving stem cell technologies. It has advised the Australian Government that the practice code of the United Kingdom Patent Office (UKPO) would be a good model for such guidelines, with its distinction between totipotent and pluripotent stem cells. Arguably, though, there is a need to codify this proposal in a legislative directive, and not merely in examination guidelines. The Commission has been reluctant to take account of the ethical considerations with respect to patent law and stem cell research. There could be greater scope for such considerations, by the use of expert advisory boards, opposition proceedings and the requirement of informed consent. The Commission has put forward a number of general and specific recommendations to enhance access to patented stem cell technologies. It recommends the development of a research exemption, and the modernisation of compulsory licensing and crown use provisions. It also explores the establishment of a stem cell bank and the promulgation of guidelines by funding agencies. Such proposals to promote greater public access to stem cell research are to be welcomed.

Disruptive innovations in complex product systems industries: A case study

We propose that disruptive changes pertaining to complex product systems (CoPS) will yield a different set of characteristics than those traditionally observed for commodity products, and seek evidence for this proposition in a case study of the Flash Converting technology, a disruptive CoPS innovation in the copper production industry. Our results show that unlike disruptions in commodity product industries, the incumbent CoPS technology does not overshoot mainstream market performance demand. Also, the disruptive CoPS innovation: (i) is not nurtured in low-end niche markets; (ii) initially satisfies mainstream market performance demand, and; (iii) has higher unit price than the incumbent technology.

Catholic teachers’ postgraduate qualifications and students’ end of schooling outcomes: A large scale Queensland based comparative study

A key feature of the current era of Australian schooling is the dominance of publically available student, school and teacher performance data. Our paper examines the intersection of data on teachers’ postgraduate qualifications and students’ end of schooling outcomes in 26 Catholic Systemic Secondary Schools and 18 Catholic Independent Secondary Schools throughout the State of Queensland. We introduce and justify taking up a new socially-just measurement model of students’ end of schooling outcomes, called the ‘Tracking and Academic Management Index’, otherwise known as ‘TAMI’. Additional analysis is focused on the outcomes of top-end students vis-à-vis all students who are encouraged to remain in institutionalised education of one form or another for the two final years of senior secondary schooling. These findings of the correlations between Catholic teachers’ postgraduate qualifications and students’ end of schooling outcomes are also compared with teachers’ postgraduate qualifications and students’ end of schooling outcomes across 174 Queensland Government Secondary Schools and 58 Queensland Independent Secondary Schools from the same data collection period. The findings raise important questions about the transference of teachers’ postgraduate qualifications for progressing students’ end of schooling outcomes as well as the performance of Queensland Catholic Systemic Secondary Schools and Queensland Catholic Independent Secondary Schools during a particular era of education.

Australian patients using a cardiac-diabetes web-based intervention program: Contributions to person-centered clinical practice

Rationale, aims and objectives: Patients with both cardiac disease and diabetes have poorer health outcomes than patients with only one chronic condition. While evidence indicates that internet based interventions may improve health outcomes for patients with a chronic disease, there is no literature on internet programs specific to cardiac patients with comorbid diabetes. Therefore this study aimed to develop a specific web-based program, then to explore patients’ perspectives on the usefulness of a new program. Methods: The interpretive approach using semi-structured interviews on a purposive sample of eligible patients with type 2 diabetes and a cardiac condition in a metropolitan hospital in Brisbane, Australia. Thematic analysis was undertaken to describe the perceived usefulness of a newly developed Heart2heart webpage. Results: Themes identified included confidence in hospital health professionals and reliance on doctors to manage conditions. Patients found the webpage useful for managing their conditions at home. Conclusions: The new Heart2heart webpage provided a positive and useful resource. Further research on to determine the potential influence of this resource on patients’ self-management behaviours is paramount. Implications for practice include using multimedia strategies for providing information to patients’ comorbidities of cardiac disease and type 2 diabetes, and further development on enhancement of such strategies

Efficacy and feasibility of a tele-health intervention for acute coronary syndrome patients with depression: Results of the 'MoodCare' randomized controlled trial

Background Depression is common after a cardiac event, yet there remain few approaches to management that are both effective and scalable. Purpose We aimed to evaluate the 6-month efficacy and feasibility of a tele-health program (MoodCare) that integrates depression management into a cardiovascular disease risk reduction program for acute coronary syndrome patients with low mood. Methods A two-arm, parallel, randomized design was used comprising 121 patients admitted to one of six hospitals for acute coronary syndrome. Results Significant treatment effects were observed for Patient Health Questionnaire 9 (PHQ9) depression (mean difference [change] = −1.8; p = 0.025; effect size: d = 0.36) for the overall sample, when compared with usual medical care. Results were more pronounced effects for those with a history of depression (mean difference [change] = −2.7; p = 0.043; effect size: d = 0.65). Conclusions MoodCare was effective for improving depression in acute coronary syndrome patients, producing effect sizes exceeding those of some face-to-face psychotherapeutic interventions and pharmacotherapy. (Trial Registration Number: ACTRN1260900038623.)