Improved fabrication of melt electrospun tissue engineering scaffolds using direct writing and advanced electric field control

Direct writing melt electrospinning is an additive manufacturing technique capable of the layer-by-layer fabrication of highly ordered 3d tissue engineering scaffolds from micron-diameter fibres. The utility of these scaffolds, however, is limited by the maximum achievable height of controlled fibre deposition, beyond which the structure becomes increasingly disordered. A source of this disorder is charge build-up on the deposited polymer producing unwanted coulombic forces. In this study we introduce a novel melt electrospinning platform with dual voltage power supplies to reduce undesirable charge effects and improve fibre deposition control. We produced and characterised several 90° cross-hatched fibre scaffolds using a range of needle/collector plate voltages. Fibre thickness was found to be sensitive only to overall potential and invariant to specific tip/collector voltage. We also produced ordered scaffolds up to 200 layers thick (fibre spacing 1 mm, diameter 40 μm) and characterised structure in terms of three distinct zones; ordered, semi-ordered and disordered. Our in vitro analysis indicates successful cell attachment and distribution throughout the scaffolds, with little evidence of cell death after seven days. This study demonstrates the importance of electrostatic control for reducing destabilising polymer charge effects and enabling the fabrication of morphologically suitable scaffolds for tissue engineering.

LacO-LacI interaction in affinity adsorption of plasmid DNA

Current approaches for purifying plasmids from bacterial production systems exploit the physiochemical properties of nucleic acids in non-specific capture systems. In this study, an affinity system for plasmid DNA (pDNA) purification has been developed utilizing the interaction between the lac operon (lacO) sequence contained in the pDNA and a 64mer synthetic peptide representing the DNA-binding domain of the lac repressor protein, LacI. Two plasmids were evaluated, the native pUC19 and pUC19 with dual lacO3/lacOs operators (pUC19lacO3/lacOs), where the lacOs operator is perfectly symmetrical. The DNA-protein affinity interaction was evaluated by surface plasmon resonance using a Biacore system. The affinity capture of DNA in a chromatography system was evaluated using LacI peptide that had been immobilized to Streamline™ adsorbent. The KD-values for double stranded DNA (dsDNA) fragments containing lacO1 and lacO3 and lacOs and lacO3 were 5.7 ± 0.3 × 10 -11 M and 4.1 ± 0.2 × 10-11 M respectively, which compare favorably with literature reports of 5 × 10-10 - 1 × 10-9 M for native laCO1 and 1-1.2 × 10-10 M for lacO1 in a saline buffer. Densitometric analysis of the gel bands from the affinity chromatography run clearly showed a significant preference for capture of the supercoiled fraction from the feed pDNA sample. The results indicate the feasibility of the affinity approach for pDNA capture and purification using native protein-DNA interaction.

Book review: "Hip Hop Japan: Rap and the Paths of Cultural Globalization’ by Ian Condry, Durham: Duke University Press

Had it been published a decade earlier, Hip-hop Japan might have been cited as a good example of the kind of multi-sited ethnography George Marcus (1998) proposes. Hip-hop Japan is a critical study of cultural globalisation. It presents as much theoretical interpretation, discussions of Japanese popular culture in general, and reviews of formulations of the Japanese self by Japanese scholars, as it does of Japanese hip-hop per se. In fact, the latter is relatively thinly described, as Condry’s project is to demonstrate how Japanese hip-hop’s particularities are made up from a mix of US hip-hop, Japanese modes of fandom, contestatory uses of the Japanese language and the specific logics of the Japanese popular music recording industry. The book journeys into these worlds as much as it does into the world of Japanese hip-hop.

An empirical study of capability development within product innovation projects

The objective of this paper is to develop insights into firms’ strategic capability development processes within product innovation projects. In particular, the research aims at investigating the interactions among product innovation, knowledge processes, and capability development within firms. Building on qualitative data from the auto-industry, our analysis reveals that across four product innovation projects, the case company developed architectural knowledge and capability. Findings reveal that, along with changes at each level of product architecture, “design knowledge” and “design capability” have been developed at the same level of product architecture, leading to capability development at that level. Furthermore, findings suggest that such capability transformation resulting from knowledge and capability creation over the course of case projects leads to modularization of product architecture. Overall, the research contributes to identifying and emphasizing the role of micro processes in capability development and renewal, which in turn enhances our understanding of strategic capability development processes.

What are the barriers of quality survivorship care for haematology cancer patients? Qualitative insights from cancer nurses

Purpose: Many haematological cancer survivors report long-term physiological and psychosocial effects beyond treatment completion. These survivors continue to experience impaired quality of life (QoL) as a result of their disease and aggressive treatment. As key members of the multidisciplinary team, the purpose of this study is to examine the insights of cancer nurses to inform future developments in survivorship care provision. Methods: Open text qualitative responses from two prospective Australian cross-sectional surveys of nurses (n=136) caring for patients with haematological cancer. Data were analysed thematically, using an inductive approach to identify themes. Results: This study has identified a number of issues that nurses perceive as barriers to quality survivorship care provision. Two main themes were identified; the first relating to the challenges nurses face in providing care (‘care challenges’), and the second relating to the challenges of providing survivorship care within contemporary health care systems (‘system challenges’). Conclusions: Cancer nurses perceive the nature of haematological cancer and its treatment, and of the health care system itself, as barriers to the provision of quality survivorship care. Care challenges such as the lack of a standard treatment path and the relapsing or remitting nature of haematological cancers may be somewhat intractable, but system challenges relating to clearly defining and delineating professional responsibilities and exchanging information with other clinicians are not. Implications for Cancer Survivors: Addressing the issues identified will facilitate cancer nurses’ provision of survivorship care, and help address haematological survivors’ needs with regard to the physical and psychosocial consequences of their cancer and treatment.

Impact of adolescent peer aggression on later educational and employment outcomes in an Australian cohort

This study used prospective birth cohort data to analyse the relationship between peer aggression at 14 years of age and educational and employment outcomes at 17 years (N = 1091) and 20 years (N = 1003). Participants from the Western Australian Pregnancy Cohort (Raine) study were divided into mutually exclusive categories of peer aggression. Involvement in peer aggression was reported by 40.2% (10.1% victims; 21.4% perpetrators; 8.7% victim–perpetrators) of participants. Participants involved in any form of peer aggression were less likely to complete secondary school. Perpetrators and victim–perpetrators of peer aggression were more likely to be in the ‘No Education, Employment or Training’ group at 20 years of age. This association was explained by non-completion of secondary school. These findings demonstrate a robust association between involvement in peer aggression and non-completion of secondary school, which in turn was associated with an increased risk of poor educational and employment outcomes in early adulthood.

ITO-free top emitting organic light emitting diodes with enhanced light out-coupling

Bottom emitting organic light emitting diodes (OLEDs) can suffer from lower external quantum efficiencies (EQE) due to inefficient out-coupling of the generated light. Herein, it is demonstrated that the current efficiency and EQE of red, yellow, and blue fluorescent single layer polymer OLEDs is significantly enhanced when a MoOx(5 nm)/Ag(10 nm)/MoOx(40 nm) stack is used as the transparent anode in a top emitting OLED structure. A maximum current efficiency and EQE of 21.2 cd/A and 6.7%, respectively, was achieved for a yellow OLED, while a blue OLED achieved a maximum of 16.5 cd/A and 10.1%, respectively. The increase in light out-coupling from the top-emitting OLEDs led to increase in efficiency by a factor of up to 2.2 relative to the optimised bottom emitting devices, which is the best out-coupling reported using solution processed polymers in a simple architecture and a significant step forward for their use in large area lighting and displays.

Room-temperature tilted-target sputtering deposition of highly transparent and low sheet resistance Al doped ZnO electrodes

Target-tilted room temperature sputtering of aluminium doped zinc oxide (AZO) provides transparent conducting electrodes with sheet resistances of <10 Ω □-1 and average transmittance in the visible region of up to 84%. The properties of the AZO electrode are found to be strongly dependent on the target-tilting angle and film thickness. The AZO electrodes showed comparable performance to commercial indium tin oxide (ITO) electrodes in organic photovoltaic (OPV) devices. OPV devices containing a bulk heterojunction active layer comprised of poly(3-n-hexylthiophene) (P3HT):phenyl-C61-butyric acid methyl ester (PCBM) and an AZO transparent conducting electrode had a power conversion efficiency (PCE) of up to 2.5% with those containing ITO giving a PCE of 2.6%. These results demonstrate that AZO films are a good alternative to ITO for transparent conducting electrodes.

Supine to standing cobb angle change in idiopathic scoliosis: The effect of endplate preselection

INTRODUCTION Standing radiographs are the ‘gold standard’ for clinical assessment of adolescent idiopathic scoliosis (AIS), with the Cobb Angle used to measure the severity and progression of the scoliotic curve. Supine imaging modalities can provide valuable 3D information on scoliotic anatomy, however, due to changes in gravitational loading direction, the geometry of the spine alters between the supine and standing position which in turn affects the Cobb Angle measurement. Previous studies have consistently reported a 7-10° [1-3] Cobb Angle increase from supine to standing, however, none have reported the effect of endplate pre-selection and which (if any) curve parameters affect the supine to standing Cobb Angle difference. CONCLUSION There is a statistically significant relationship between supine to standing Cobb Angle change and fulcrum flexibility. Therefore, this difference can be considered a measure of spinal flexibility. Pre-selecting vertebral endplates causes only minor changes.

A comparative study of two design charrettes: Implications for codesign and participatory action research

The purpose of this paper is to explore how participatory prototyping, through the use of design charrettes, can advance participatory action research (PAR) approaches and contribute to codesign practices in organisational settings. This will be achieved through the comparison of two varying design charrette experiences from a PAR initiative to redesign spaces in the Auraria Library in Denver, Colorado. Each design charrette followed a three-stage sequence of information sharing, idea generation and prototyping, and prioritisation with each stage building upon the former, both in terms of design concepts and in building up elements of ‘making’. While both charrette structures were similar, leadership and execution varied considerably. Lessons learned from the two design charrette experiences are presented, including the value of participatory prototyping within PAR to support ‘research through design’ activities. In addition, it highlights the value of authentic design participation of ‘designing with’ rather than ‘designing for’ to encourage optimal design outcomes.

Factors associated with health risk behavior among school children in urban Vietnam

Background Health risk behavior among young people is a public health problem in Vietnam. In addition, road traffic injuries are the leading cause of death for those aged 15–29 years. The consequences can be devastating for adolescents and their families, and can create a significant economic burden on society. Objective: The aim of this study was to identify protective and risk factors that may influence three health risk behaviors among school children: suicidal thinking (ST), drinking alcohol (DA), and underage motorbike driving (MD). Methods A cross-sectional survey of 972 adolescents (aged 12–15 years) was conducted in two secondary schools in Hanoi, Vietnam. The schools were purposely selected, one each from the inner city and a suburban area, from which classes (grade 6 to 8) were randomly selected. All students attending classes on survey days took part in the survey. The anonymous, self-completed questionnaire included measures of risk behavior, school connectedness, parental bonding, and other factors. Multivariable regression models were used to examine associations between the independent variables and the three health risk behaviors controlling for confounding factors. Results Young people in the inner city school reported a higher prevalence of all three risk behaviors than those in the suburban area (ST: 16.1% [95% confidence interval, or CI, 12.9–19.3] versus 4.6% [95% CI 2.7–6.5], p<0.001; DA: 20.3% [95% CI 16.8–23.8] versus 8.3% [95% CI 5.8–10.8], p<0.001, and MD: 10.1% [95% CI 7.4–12.8] versus 5.7% [95% CI 3.6–7.8], p<0.01). School connectedness and mother and father care appeared to be significant protective factors. For males, bullying in school was associated with suicidal thoughts, whereas for both males and females, school connectedness may be protective against suicidal ideation. Conclusion This study supports findings from other nations regarding suicidal thoughts and alcohol use, and appears to be one of the first to examine risk and protective factors forMD. Health promotion within schools should be introduced to improve students’ feelings of connectedness in combination with communication and education campaigns focusing on parental care and engaging teachers for the promotion of safer, supportive school environments.

Visual demands in modern Australian primary school classrooms

BACKGROUND The visual demands of modern classrooms are poorly understood yet are relevant in determining the levels of visual function required to perform optimally within this environment. METHODS Thirty-three Year 5 and 6 classrooms from eight south-east Queensland schools were included. Classroom activities undertaken during a full school day (9 am to 3 pm) were observed and a range of measurements recorded, including classroom environment (physical dimensions, illumination levels), text size and contrast of learning materials, habitual working distances (distance and estimated for near) and time spent performing various classroom tasks. These measures were used to calculate demand-related minimum criteria for distance and near visual acuity, contrast and sustained use of accommodation and vergence. RESULTS The visual acuity demands for distance and near were 0.33 ± 0.13 and 0.72 ± 0.09 logMAR, respectively (using habitual viewing distances and smallest target sizes) or 0.33 ± 0.09 logMAR assuming a 2.5 times acuity reserve for sustained near tasks. The mean contrast levels of learning materials at distance and near were greater than 70 per cent. Near tasks (47 per cent) dominated the academic tasks performed in the classroom followed by distance (29 per cent), distance to near (15 per cent) and computer-based (nine per cent). On average, children engaged in continuous near fixation for 23 ± 5 minutes at a time and during distance-near tasks performed fixation changes 10 ± 1 times per minute. The mean estimated habitual near working distance was 23 ± 1 cm (4.38 ± 0.24 D accommodative demand) and the vergence demand was 0.86 ± 0.07Δ at distance and 21.94 ± 1.09Δ at near assuming an average pupillary distance of 56 mm. CONCLUSIONS Relatively high levels of visual acuity, contrast demand and sustained accommodative-convergence responses are required to meet the requirements of modern classroom environments. These findings provide an evidence base to inform prescribing guidelines and develop paediatric vision screening protocols and referral criteria.

The development and inter-relationship of metacognitive components among primary school children

Much interest has been expressed in the construct metacognition, the individual's knowledge and control of his own cognitive processes. Recent educational proposals have suggested the training of general metacognitive principles in schools. The exact nature of the construct has, however, remained vague. The aim of the present study was to provide some clarity. In a study of the metacognitive responses of 144 primary school children (aged 7‐11 years) four measures commonly used to assess metacognitive function were examined. First, the content of each measure was examined. Secondly, in an attempt to identify a metacognitive factor, commonality among the measures, both of developmental patterns and statistical relationship, was sought. Whilst a common pattern of development in the children's responses to the four measures was identified, factor analysis failed to provide evidence for a common metacognitive factor and unified construct.

Meaning of public space and sense of community: The case of new neighbourhoods in the Kathmandu Valley

This paper examines the meaning of public space and sense of community among neighbourhood residents in the changing urban context of the Kathmandu Valley in Nepal. Two new neighbourhoods were selected for the purpose of this study with data collected from interviews with the residents. The study has found that most residents of the new neighbourhoods have an understanding of the significance of public space in community life. However, such understandings are based less on the actual use of public space. The existing public spaces in these neighbourhoods are less successful in offering a meaning to the residents, due to their poor development and the lack of active use. Despite these changes, some residents believe they have developed a sense of community, which is an outcome of other individual factors than the use of public space. It is argued that the role of contemporary neighbourhood public space in fostering a sense of community appears to be less significant in the valley’s present context.