Remoção fotocatalítica de micropoluentes em meios porosos funcionalizados

Dissertação de mestrado integrado em Engenharia Civil

Gender and media: where do we stand today?

Nowadays, the public discourses about gender equality are commonly accepted in Western society. In fact, we live in an era of “equality illusion” (Banyard, 2010) because the mainstream discourses incorporate gender in the agenda, conveying the message that feminist struggles are unnecessary today. At the same time, postfeminism (McRobbie, 2004) gains importance and demonstrates the intricacies of a neoliberal, highly individualist culture that subtly imprisons the freedoms that it is supposed to grant (Gill & Scharff, 2011). However, back in 1978, Gaye Tuchman used the expression “symbolic annihilation” to refer to how the media represented women. The author refers to a “symbolic annihilation” because sometimes it is so hidden and subtle that it becomes difficult to perceive – and to be fought. Much has improved since then; yet a lot remains the same. Over the past decades there have been marked changes in gender relations, in feminist activism, in the (media) communication industry and in society in general (Byerly, 2013; Carter, Steiner & McLaughlin, 2015; Gallagher, 2014; Gallego, 2013; Krijnen, Álvares & Van Bauwel, 2011; Krijnen & Van Bauwel, 2015; Lobo, Silveirinha, Subtil, & Torres, 2015; Ross, 2009; Silveirinha, 2001; Van Zoonen, 1994, 2010). Now, in a globalised and media saturated world, the gendered picture is, consequently, different. The contemporary grammar is marked by diverse and complex tensions (van Zoonen, 2010).

Organic-inorganic nanostructured multilayers for calcium phosphate biomineralization

The weak fixation of biomaterials within the bone structure is one of the major reasons of implants failures. Calcium phosphate (CaP) coatings are used in bone tissue engineering to improve implant osseointegration by enhancing cellular adhesion, proliferation and differentiation, leading to a tight and stable junction between implant and host bone. It has also been observed that materials compatible with bone tissue either have a CaP coating or develop such a calcified surface upon implantation. Thus, the development of bioactive coatings becomes essential for further improvement of integration with the surrounding tissue. However, most of current applied CaP coatings methods (e.g. physical vapor deposition), cannot be applied to complex shapes and porous implants, provide poor structural control over the coating and prevent incorporation of bioactive organic compounds (e.g. antibiotics, growth factors) because of the used harsh processing conditions. Layer-by-layer (LbL) is a versatile technology that permits the building-up of multilayered polyelectrolyte films in mild conditions based on the alternate adsorption of cationic and anionic elements that can integrate bioactive compounds. As it is recognized in natureâ s biomineralization process the presence of an organic template to induce mineral deposition, this work investigate a ion based biomimetic method where all the process is based on LbL methodology made of weak natural-origin polyelectrolytes. A nanostructured multilayer component, with 5 or 10 bilayers, was produced initially using chitosan and chondroitin sulphate polyelectrolyte biopolymers, which possess similarities with the extracellular matrix and good biocompatibility. The multilayers are then rinsed with a sequential passing of solutions containing Ca2+ and PO43- ions. The formation of CaP over the polyelectrolyte multilayers was confirmed by QCM-D, SEM and EDX. The outcomes show that 10 polyelectrolyte bilayer condition behaved as a  better site for initiating the formation of CaP as the precipitation occur at earlier stages than in 5 polyelectrolyte bilayers one. This denotes that higher number of bilayers could hold the CaP crystals more efficiently. This work achieved uniform coatings that can be applied to any surface with access to the liquid media in a low-temperature method, which potentiates the manufacture of effective bioactive biomaterials with great potential in orthopedic applications.

Literacia, media e cidadania - Livro de atas do 3.º Congresso

(Excerto) A terceira edição do Congresso sobre Literacia, Media e Cidadania (LMC) teve lugar nos dias 17 e 18 de abril de 2015, em Lisboa, no Pavilhão do Conhecimento. Organizado pelo GILM – Grupo Informal sobre Literacia para os Media, o evento, que contou com a participação de cerca de 250 profissionais, teve como eixo central a temática “Literacia Mediática e Leituras Críticas do Mundo”. Durante dois dias de trabalho, procurou-se pro-mover uma reflexão crítica sobre a atualidade e o mundo, e o modo como os media a representam, com o objetivo de aprender a olhar e a ler criticamente os ecrãs e as mensagens e textos que produzem, o modo como os cidadãos os usam, como se apropriam deles e como produzem e partilham informação. Estes e outros tópicos relacionados foram apresentados e debatidos em 4 sessões plenárias, 16 sessões de comunicações livres e 4 workshops, acompanhados de uma mostra de projetos, produtos e serviços patentes no átrio do Pavilhão.

Quantitative image analysis as a tool for Yarrowia lipolytica dimorphic growth evaluation in different culture media

Yarrowia lipolytica, a yeast strain with a huge biotechnological potential, capable to produce metabolites such as γ-decalactone, citric acid, intracellular lipids and enzymes, possesses the ability to change its morphology in response to environmental conditions. In the present study, a quantitative image analysis (QIA) procedure was developed for the identification and quantification of Y. lipolytica W29 and MTLY40-2P strains dimorphic growth, cultivated in batch cultures on hydrophilic (glucose and N-acetylglucosamine (GlcNAc) and hydrophobic (olive oil and castor oil) media. The morphological characterization of yeast cells by QIA techniques revealed that hydrophobic carbon sources, namely castor oil, should be preferred for both strains growth in the yeast single cell morphotype. On the other hand, hydrophilic sugars, namely glucose and GlcNAc caused a dimorphic transition growth towards the hyphae morphotype. Experiments for γ-decalactone production with MTLY40-2P strain in two distinct morphotypes (yeast single cells and hyphae cells) were also performed. The obtained results showed the adequacy of the proposed morphology monitoring tool in relation to each morphotype on the aroma production ability. The present work allowed establishing that QIA techniques can be a valuable tool for the identification of the best culture conditions for industrial processes implementation.

Novel hybrid multifunctional magnetoelectric porous composite films

Novel multifunctional porous films have been developed by the integration of magnetic CoFe2O4 (CFO) nanoparticles into poly(vinylidene fluoride)-Trifuoroethylene (P(VDF-TrFE)), taking advantage of the synergies of the magnetostrictive filler and the piezoelectric polymer. The porous films show a piezoelectric response with an effective d33 coefficient of -22 pC/N-1, a maximum magnetization of 12 emu.g-1 and a maximum magnetoelectric coefficient of 9 mV.cm-1.Oe-1. In this way, a multifunctional membrane has been developed suitable for advanced applications ranging from biomedical to water treatment.

Poly(vinylidene fluoride-co-chlorotrifluoroethylene) (PVDF-CTFE) lithium-ion battery separator membranes prepared by phase inversion

Separator membranes based on poly(vinylidene fluoride-co-chlorotrifluoroethylene) (PVDF-CTFE) were prepared by solvent casting technique based on its phase diagram in N,Ndimethylformamide (DMF) solvent. The microstructure of the PVDF-CTFE separator membranes depends on the initial position (temperature and concentration) of the solution in the phase diagram of the PVDF-CTFE/DMF system. A porous microstructure is achieved for PVDF-CTFE membranes with solvent evaporation temperature up to 50 ºC for a polymer/solvent relative concentration of 20 wt%. The ionic conductivity of the separator depends on the degree of porosity and electrolyte uptake, the highest room temperature value being 1.5 mS.cm-1 for the sample with 20 wt% of polymer concentration and solvent evaporation temperature at 25 ºC saturated with 1 mol L-1 lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) in propylene carbonate (PC). This PVDF-CTFE separator membrane in Li/C-LiFePO4 half-cell shows good cyclability and rate capability, showing a discharge value after 50 cycles of 92 mAh.g-1 at 2 C, which is still 55% of the theoretical value. PVDF-CTFE separators are thus excellent candidates for high-power and safety lithium-ion batteries applications.

Tailoring microstructure and physical properties of poly(vinylidene fluoride–hexafluoropropylene) porous films

This paper presents a systematic study for the production of poly(vinylidene fluoride-hexafluoropropylene), P(VDF-HFP), porous films using solvent evaporation (SE) and non-solvent induced phase separation (NIPS) techniques. Parameters such as volume fraction of the copolymer solution, film thickness, time exposure to air, non-solvent and temperature of the coagulation bath were investigated on the morphology, crystallization and mechanical properties of the samples. Films with different porous morphologies including homogeneous pore sizes, macrovoids and spherulites were obtained depending on the processing conditions, which in turn affect the wettability and mechanical properties of the material. Knowing that the phase content of the films also depends on the processing conditions, this paper shows that P(VDF-HFP) films with tailored porous morphology, electroactive phase content, hydrophobicity, cristallinity and mechanical properties can be achieved for a specific application using the adequate SE and NIPS techniques conditions.

Poly(vinylidene fluoride-trifluoroethylene) porous films: tailoring microstructure and physical properties by solvent casting strategies

A systematic study for the production of porous poly(vinylidene fluoride-trifluoroethylene), P(VDF-TrFE), films using solvent evaporation and non-solvent induced phase separation techniques is presented. Processing parameters such as copolymer volume fraction, solvent, preset exposure time to air before immersion, and non-solvent and temperature of the coagulation bath were varied and the corresponding sample morphology, hydrophobicity, thermal and mechanical properties were determined. Film morphologies including homogeneous pore distributions, micropores, microvoids, spherulites and non-porous films were obtained. The morphology variations strongly influence sample hydrophobicity and mechanical properties. All samples crystallize in the electroactive β-phase with a degree of crystallinity around 30 %.

Literacia, media e cidadania: actas do 1º congresso nacional

[Excerto] Este livro de atas reúne um conjunto de comunicações apresentadas no 1º Congresso de Literacia, Média, Cidadania, realizado na Universidade do Minho, em 2011.

User expectations for media sharing practices in open display networks

Open Display Networks have the potential to allow many content creators to publish their media to an open-ended set of screen displays. However, this raises the issue of how to match that content to the right displays. In this study, we aim to understand how the perceived utility of particular media sharing scenarios is affected by three independent variables, more specifically: (a) the locativeness of the content being shared; (b) how personal that content is and (c) the scope in which it is being shared. To assess these effects, we composed a set of 24 media sharing scenarios embedded with different treatments of our three independent variables. We then asked 100 participants to express their perception of the relevance of those scenarios. The results suggest a clear preference for scenarios where content is both local and directly related to the person that is publishing it. This is in stark contrast to the types of content that are commonly found in public displays, and confirms the opportunity that open displays networks may represent a new media for self-expression. This novel understanding may inform the design of new publication paradigms that will enable people to share media across the display networks.

Os media e a crise dos refugiados: Agenda de actividades

(Excerto) É pelos media que temos acesso a informação relevante sobre o mundo. O problema da crise dos refugiados, que parece novo porque nos bateu em cheio à nossa porta, não foge à regra. Nesse sentido, os media são e serão imprescindíveis. Temos hoje acesso a uma evidente quantidade e aparente diversidade de informações. A Internet e as redes sociais possibilitam o acesso a um grande número de fontes, ainda que de valia variável. Mas é inquestionável que a informação que nos chega procede esmagadoramente de agências e de meios que vêem o mundo a partir de determinados ângulos: do seu lugar geográfico, que condiciona, como sabemos, a relevância das matérias escolhidas; das fontes a que os media têm mais facilmente acesso ou daquelas que se organizam para fazer valer determinados pontos de vista e interpretações sobre a realidade junto dos media; e, naturalmente, das estratégias e interesses dos grandes grupos mediáticos que detêm e controlam os media. Por exemplo, constata-se que as televisões, rádios e jornais focam muito mais o problema humanitário dos refugiados e os impactos que eles provocam em diferentes regiões da Europa do que a complexa e dramática situação da gigantesca ‘máquina que produz refugiados’ que, em certos aspectos, a própria Europa alimenta. Apesar de tudo, os media não são todos iguais. Em muitos deles, há profissionais que procuram fazer um trabalho de qualidade. E através das redes sociais temos, com alguma frequência, acesso a dados que repercutem os grandes órgãos de informação ou dão visibilidade a vozes e visões alternativas. Porém, tudo somado, não podemos estar seguros de ter, à partida, acesso a informação relevante, rigorosa e completa sobre uma matéria tão complexa e delicada como a que está por detrás da crise dos refugidos. Isso exige procura em fontes diversas, trabalho comparativo, análise crítica, acompanhamento atento, debate. O Seminário Permanente de Educação para os Media, que tem funcionado no quadro do Centro de Estudos de Comunicação e Sociedade da Universidade do Minho procura, com esta Agenda de Atividades, proporcionar algumas pistas e ferramentas para esse posicionamento crítico e esclarecido. Para isso, contou com contributos de diversos quadrantes, que corresponderam ao desafio que lhes foi lançado.

Comunicação Android com câmaras ONVIF e gestão de Perfis de Media

Dissertação de mestrado integrado em Engenharia de Telecomunicações e Informática

Kids Media Lab: Tecnologias e a aprendizagem da programação em idade Pré-escolar

Sabedores da realidade tecnológica que envolve as crianças, sentimos necessidade de conhecer aprofundadamente como é que as crianças aprendem, ou seja, como estruturam e desenvolvem o seu pensamento, nesta relação com as tecnologias e através da programação. A presente investigação revela-se inovadora, quer no contexto em que vai ser implementado, quer nos objetivos da própria investigação. Pretendemos consolidar conhecimento sobre as teorias de aprendizagem, através da introdução da programação de forma lúdica e criativa nas atividades no jardim de infância. Compreender como as crianças reagem na utilização das tecnologias e da programação revela-se importante para conhecer o seu comportamento, o seu estilo de aprendizagem e permitir aos profissionais de educação antecipar ou não esta integração, nos seus contextos educativos. Conhecer como todo este processo de aprendizagem é vivenciado pelas crianças irá permitir avaliar quais os benefícios e riscos da utilização das tecnologias e da aprendizagem da programação em idade pré-escolar.

Economia Política dos Media: Relatório do programa, conteúdo e métodos de ensino

Relatório e lição completa apresentados como requisito para Provas de Agregação, no Ramo de Ciências da Comunicação, Área de conhecimento de Sociologia da Informação, ao abrigo do Decreto-Lei nº 239/2007 de 19 de Junho.