Development of foam one-part geopolymers with enhanced thermal insulation performance and low carbon dioxide emissions

Buildings are responsible for more than 40% of the energy consumption and greenhouse gas emissions. Thus, increasing building energy efficiency is one the most cost-effective ways to reduce emissions. The use of thermal insulation materials could constitute the most effective way of reducing heat losses in buildings by minimising heat energy needs. These materials have a thermal conductivity factor, k (W/m.K) lower than 0.065 while other insulation materials such as aerated concrete can go up to 0.11. Current insulation materials are associated with negative impacts in terms of toxicity. Polystyrene, for example contains anti-oxidant additives and ignition retardants. In addition, its production involves the generation of benzene and chlorofluorocarbons. Polyurethane is obtained from isocyanates, which are widely known for their tragic association with the Bhopal disaster. Besides current insulation materials releases toxic fumes when subjected to fire. This paper presents experimental results on one-part geopolymers. It also includes global warming potential assessment and cost analysis. The results show that only the use of aluminium powder allows the production mixtures with a high compressive strength however its high cost means they are commercially useless when facing the competition of commercial cellular concrete. The results also show that one-part geopolymer mixtures based on 26%OPC +58.3%FA +8%CS +7.7%CH and 3.5% hydrogen peroxide constitute a promising cost efficient (67 euro/m3), thermal insulation solution for floor heating systems with low global warming potential of 443 KgCO2eq/m3.

A emergência da matemática em situações de jogo no jardim de infância e na creche

Relatório de estágio de mestrado em Educação Pré-Escolar

Aprender a debater: o debate como atividade de interação e de participação democrática

Relatório de estágio de mestrado em Ensino de Inglês e de Espanhol no 3º Ciclo do Ensino Básico e no Ensino Secundário

Occupational Ergonomics and Safety, Part 1

[Excerpt] It seems that significant progress has been made in last years in what concerns the scientific knowledge about work and its impact on workers’ wellbeing and health, which includes but it is not limited to occupational ergonomics and safety. Even considering that this domain is very transversal and comprehensive, as it may include researchers from multidisciplinary teams, research in this domain has clearly increased and we have now a larger number of scientific events, a higher number of researchers publishing their works, and a high emergence rate of research groups at universities and other research institutions, which was also followed by an increasing concern about these issues by governments and other regulators. Even though it is strikingly difficult to demonstrate it in an unequivocal way, this appears to have had a clear effect on companies and on their ability to implement plans and measures to prevent and control occupational risk factors. But despite these advances, occupational risk prevention is still a domain for which solutions are neither complete nor permanent, since the evolution of work systems gives rise to new challenges.

Occupational Ergonomics and Safety, Part 2

[Excerpt] This section is the second part of a special issue on Occupational Ergonomics and Safety, which was organized for WORK: A Journal of Prevention, Assessment and Rehabilitation. As in the first part of this thematic issue, this one comprises thirteen papers that were peer-reviewed and, finally, accepted for publication. This issue includes the work of authors from eleven countries all over the world. The variety of the presented works is not limited to their geographical origin, but it is also visible on the topics that are addressed, ranging from typical studies on ergonomics to safety management studies, as well as occupational hygiene topics.

Estudo da perceção (problemática) de vogais e ditongos orais de alunos de PLNM, falantes de Inglês L1

Dissertação de mestrado em Português Língua Não Materna (PLNM) - Português Língua Estrangeira (PLE) / Português Língua Segunda (PL2)

The greener grass: da autorrepresentação em Alanis Morissette

Tese de Doutoramento em Ciências da Literatura - Especialidade em Teoria da Literatura

The role of deviant-letter position in cognate word processing

Dissertação de mestrado integrado em Psicologia

Which soft lens power is better for piggyback in keratoconus? Part II

Purpose: To evaluate how soft lens power affects rigid gas-permeable (RGP) lens power and visual acuity (VA) in piggyback fittings for keratoconus. Methods: Sixteen keratoconus subjects (30 eyes) were included in the study. Piggyback contact lens fittings combining Senofilcon-A soft lenses of −6.00, −3.00, +3.00 and +6.00 D with Rose K2 RGP contact lenses were performed. Corneal topography was taken on the naked eye and over each soft contact lens before fitting RGP lenses. Mean central keratometry, over-refraction, RGP back optic zone radius (BOZR) and estimated final power as well as VA were recorded and analyzed. Results: In comparison to the naked eye, the mean central keratometry flattened with both negative lens powers (p < 0.05 in all cases), did not change with the +3.00 soft lens power (p = 1.0); and steepened with the +6.00 soft lens power (p = 0.02). Rigid gas-permeable over-refraction did not change significantly between different soft lens powers (all p > 0.05). RGP’s BOZR decreased significantly with both positive in comparison with both negative soft lens powers (all p < 0.001), but no significant differences were found among negative- or positive-powers separately (both p > 0.05). Estimated RGP’s final power increased significantly with positive in comparison with negative lens powers (all p < 0.001), but no significant differences were found among negative or positive lens powers separately (both p > 0.05). Visual acuity did not change significantly between the different soft lens powers assessed (all p > 0.05). Conclusion: The use of negative-powered soft lenses in piggyback fitting reduces RGP lens power without impacting VA in keratoconus subjects.

Cost-efficient one-part alkali-activated mortars with low global warming potential for floor heating systems applications

Increasing building energy efficiency is one the most cost-effective ways to reduce emissions. The use of thermal insulation materials mitigates heat loss in buildings, therefore minimising heat energy needs. In recent years, several papers were published on the subject of foam alkali-activated cements with enhanced thermal conductivity. However, on those papers cost analysis was strangely avoided. This paper presents experimental results on one-part alkali-activated cements. It also includes global warming potential assessment and cost analysis. Foam one-part alkali-activated cements cost simulations considering two carbon dioxide social costs scenarios are also included. The results show that one-part alkali-activated cements mixtures based on 26%OPC + 58.3%FA + 8%CS + 7.7%CH and 3.5% hydrogen peroxide constitute a promising cost-efficient (67 euro/m3), thermal insulation solution for floor heating systems. This mixture presents a low global warming potential of 443 KgCO2eq/m3. The results confirm that in both carbon dioxide social cost scenarios the mixture 26 OPC + 58.3 FA + 8 CS + 7.7 CH with 3.5% hydrogen peroxide foaming agent is still the most cost efficient.

Supercritical fluid and pharmaceutical applications. Part I: Process classification

The supercritical fluid technology has been target of many pharmaceuticals investigations in particles production for almost 35 years. This is due to the great advantages it offers over others technologies currently used for the same purpose. A brief history is presented, as well the classification of supercritical technology based on the role that the supercritical fluid (carbon dioxide) performs in the process.

Micro/nano-structured superhydrophobic surfaces in the biomedical field: part I: basic concepts and biomimetic approaches.

Inspired by natural structures, great attention has been devoted to the study and development of surfaces with extreme wettable properties. The meticulous study of natural systems revealed that the micro/nano-topography of the surface is critical to obtaining unique wettability features, including superhydrophobicity. However, the surface chemistry also has an important role in such surface characteristics. As the interaction of biomaterials with the biological milieu occurs at the surface of the materials, it is expected that synthetic substrates with extreme and controllable wettability ranging from superhydrophilic to superhydrophobic regimes could bring about the possibility of new investigations of cellâ material interactions on nonconventional surfaces and the development of alternative devices with biomedical utility. This first part of the review will describe in detail how proteins and cells interact with micro/nano-structured surfaces exhibiting extreme wettabilities.

Determinação da medida da pena privativa de liberdade: um olhar crítico a partir do direito anglo-saxónico

Tese de Doutoramento em Ciências Jurídicas - Área de Ciências Jurídicas Públicas

Compatibilidade do contrato de concessão comercial com as regras de defesa da concorrência

Dissertação de mestrado em Direito dos Contratos e da Empresa

João de Guimarães Golias, o homem e o diplomata (1599-1653)

Dissertação de mestrado em História