ADAMs, Osteoclastogenesis and Bone Destruction in the Loosening of the Totally Replaced Hip

Total hip replacement is the golden standard treatment for severe osteoarthritis refractory for conservative treatment. Aseptic loosening and osteolysis are the major long-term complications after total hip replacement. Foreign body giant cells and osteoclasts are locally formed around aseptically loosening implants from precursor cells by cell fusion. When the foreign body response is fully developed, it mediates inflammatory and destructive host responses, such as collagen degradation. In the present study, it was hypothesized that the wear debris and foreign body inflammation are the forces driving local osteoclast formation, peri-implant bone resorption and enhanced tissue remodeling. Therefore the object was to characterize the eventual expression and the role of fusion molecules, ADAMs (an abbreviation for A Disintegrin And Metalloproteinase, ADAM9 and ADAM12) in the fusion of progenitor cells into multinuclear giant cells. For generation of such cells, activated macrophages trying to respond to foreign debris play an important role. Matured osteoclasts together with activated macrophages mediate bone destruction by secreting protons and proteinases, including matrix metalloproteinases (MMPs) and cathepsin K. Thus this study also assessed collagen degradation and its relationship to some of the key collagenolytic proteinases in the aggressive synovial membrane-like interface tissue around aseptically loosened hip replacement implants. ADAMs were found in the interface tissues of revision total hip replacement patients. Increased expression of ADAMs at both transcriptional and translational levels was found in synovial membrane-like interface tissue of revision total hip replacement (THR) samples compared with that in primary THR samples. These studies also demonstrate that multinucleate cell formation from monocytes by stimulation with macrophage-colony stimiulating factor (M-CSF) and receptor activator of nuclear factor kappa B ligand (RANKL) is characterized by time dependent changes of the proportion of ADAMs positive cells. This was observed both in the interface membrane in patients and in two different in vitro models. In addition to an already established MCS-F and RANKL driven model, a new virally (parainfluenza 2) driven model (of human salivary adenocarcinoma (HSY) cells or green monkey kidney (GMK) cells) was developed to study various fusion molecules and their role in cell fusion in general. In interface membranes, collagen was highly degraded and collagen degradation significantly correlated with the number of local cells containing collagenolytic enzymes, particularly cathepsin K. As a conclusion, fusion molecules ADAM9 and ADAM12 seem to be dynamically involved in cell-cell fusion processes and multinucleate cell formation. The highly significant correlation between collagen degradation and collagenolytic enzymes, particularly cathepsin K, indicates that the local acidity of the interface membrane in the pathologic bone and soft tissue destruction. This study provides profound knowledge about cell fusion and mechanism responsible for aseptic loosening as well as increases knowledge helpful for prevention and treatment.

Road Dust from Pavement Wear and Traction Sanding

Vehicles affect the concentrations of ambient airborne particles through exhaust emissions, but particles are also formed in the mechanical processes in the tire-road interface, brakes, and engine. Particles deposited on or in the vicinity of the road may be re-entrained, or resuspended, into air through vehicle-induced turbulence and shearing stress of the tires. A commonly used term for these particles is road dust . The processes affecting road dust emissions are complex and currently not well known. Road dust has been acknowledged as a dominant source of PM10 especially during spring in the sub-arctic urban areas, e.g. in Scandinavia, Finland, North America and Japan. The high proportion of road dust in sub-arctic regions of the world has been linked to the snowy winter conditions that make it necessary to use traction control methods. Traction control methods include dispersion of traction sand, melting of ice with brine solutions, and equipping the tires with either metal studs (studded winter tires), snow chains, or special tire design (friction tires). Several of these methods enhance the formation of mineral particles from pavement wear and/or from traction sand that accumulate in the road environment during winter. When snow and ice melt and surfaces dry out, traffic-induced turbulence makes some of the particles airborne. A general aim of this study was to study processes and factors underlying and affecting the formation and emissions of road dust from paved road surfaces. Special emphasis was placed on studying particle formation and sources during tire road interaction, especially when different applications of traction control, namely traction sanding and/or winter tires were in use. Respirable particles with aerodynamic diameter below 10 micrometers (PM10) have been the main concern, but other size ranges and particle size distributions were also studied. The following specific research questions were addressed: i) How do traction sanding and physical properties of the traction sand aggregate affect formation of road dust? ii) How do studded tires affect the formation of road dust when compared with friction tires? iii) What are the composition and sources of airborne road dust in a road simulator and during a springtime road dust episode in Finland? iv) What is the size distribution of abrasion particles from tire-road interaction? The studies were conducted both in a road simulator and in field conditions. The test results from the road simulator showed that traction sanding increased road dust emissions, and that the effect became more dominant with increasing sand load. A high percentage of fine-grained anti-skid aggregate of overall grading increased the PM10 concentrations. Anti-skid aggregate with poor resistance to fragmentation resulted in higher PM levels compared with the other aggregates, and the effect became more significant with higher aggregate loads. Glaciofluvial aggregates tended to cause higher particle concentrations than crushed rocks with good fragmentation resistance. Comparison of tire types showed that studded tires result in higher formation of PM emissions compared with friction tires. The same trend between the tires was present in the tests with and without anti-skid aggregate. This finding applies to test conditions of the road simulator with negligible resuspension. Source and composition analysis showed that the particles in the road simulator were mainly minerals and originated from both traction sand and pavement aggregates. A clear contribution of particles from anti-skid aggregate to ambient PM and dust deposition was also observed in urban conditions. The road simulator results showed that the interaction between tires, anti-skid aggregate and road surface is important in dust production and the relative contributions of these sources depend on their properties. Traction sand grains are fragmented into smaller particles under the tires, but they also wear the pavement aggregate. Therefore particles from both aggregates are observed. The mass size distribution of traction sand and pavement wear particles was mainly coarse, but fine and submicron particles were also present.

Pain in juvenile idiopathic arthritis : parents and children as agents of disease management

Juvenile idiopathic arthritis (JIA) is a severe childhood disease usually characterized by long-term morbidity, unpredictable course, pain, and limitations in daily activities and social participation. The disease affects not only the child but also the whole family. The family is expected to adhere to an often very laborious regimen over a long period of time. However, the parental role is incoherently conceptualized in the research field. Pain in JIA is of somatic origin, but psychosocial factors, such as mood and self-efficacy, are critical in the perception of pain and in its impact on functioning. This study examined the factors correlating and possibly explaining pain in JIA, with a special emphasis on the mutual relations between parent- and patient-driven variables. In this patient series pain was not associated with the disease activity. The degree of pain was on average fairly low in children with JIA. When the children were clustered according to age, anxiety and depression, four distinguishable cluster groups significantly associated with pain emerged. One of the groups was described by concept vulnerability because of unfavorable variable associations. Parental depressive and anxiety symptoms accompanied by illness management had a predictive power in discriminating groups of children with varying distress levels. The parent’s and child’s perception of a child’s functional capability, distress, and somatic self-efficacy had independent explanatory power predicting the child’s pain. Of special interest in the current study was self-efficacy, which refers to the belief of an individual that he/she has the ability to engage in the behavior required for tackling the disease. In children with JIA, strong self-efficacy was related to lower levels of pain, depressive symptoms and trait anxiety. This suggests strengthening a child’s sense of self-efficacy, when helping the child to cope with his or her disease. Pain experienced by a child with JIA needs to be viewed in a multidimensional bio-psycho-social context that covers biological, environmental and cognitive behavioral mechanisms. The relations between the parent-child variables are complex and affect pain both directly and indirectly. Developing pain-treatment modalities that recognize the family as a system is also warranted.

Widening Perspectives of Teacher Education : Studies on theory-practice relationship, reflection, research and professional development

This dissertation examined the research-based teacher education at the University of Helsinki from different theoretical and practical perspectives. Five studies focused on these perspectives separately as well as overlappingly. Study I focused on the reflection process of graduating teacher students. The data consisted of essays the students wrote as their last assignment before graduating, where their assignment was to examine their development as researchers during their MA thesis research process. The results indicated that the teacher students had analysed their own development thoroughly during the process and that they had reflected on theoretical as well as practical educational matters. The results also pointed out that, in the students’ opinion, personally conducted research is a significant learning process. -- Study II investigated teacher students’ workplace learning and the integration of theory and practice in teacher education. The students’ interviews focused on their learning of teacher’s work prior to education. The interviewees’ responses concerning their ‘surviving’ in teaching prior to teacher education were categorized into three categories: learning through experiences, school as a teacher learning environment, and case-specific learning. The survey part of the study focused on integration of theory and practice within the education process. The results showed that the students who worked while they studied took advantage of the studies and applied them to work. They set more demanding teaching goals and reflected on their work more theoretically. -- Study III examined practical aspects of the teacher students’ MA thesis research as well as the integration of theory and practice in teacher education. The participants were surveyed using a web-based survey which dealt with the participants’ teacher education experiences. According to the results, most of the students had chosen a practical topic for their MA thesis, one arising from their work environment, and most had chosen a research topic that would develop their own teaching. The results showed that the integration of theory and practice had taken place in much of the course work, but most obviously in the practicum periods, and also in the courses concerning the school subjects. The majority felt that the education had in some way been successful with regards to integration. -- Study IV explored the idea of considering teacher students’ MA thesis research as professional development. Twenty-three teachers were interviewed on the subject of their experiences of conducting research about their own work as teachers. The results of the interviews showed that the reasons for choosing the MA thesis research topic were multiple: practical, theoretical, personal, professional reasons, as well as outside effect. The objectives of the MA thesis research, besides graduating, were actual projects, developing the ability to work as teachers, conducting significant research, and sharing knowledge of the topic. The results indicated that an MA thesis can function as a tool for professional development, for example in finding ways for adjusting teaching, increasing interaction skills, gaining knowledge or improving reflection on theory and/or practice, strengthening self-confidence as a teacher, increasing researching skills or academic writing skills, as well as becoming critical and being able to read scientific and academic literature. -- Study V analysed teachers’ views of the impact of practitioner research. According to the results, the interviewees considered the benefits of practitioner research to be many, affecting teachers, pupils, parents, the working community, and the wider society. Most of the teachers indicated that they intended to continue to conduct research in the future. The results also showed that teachers often reflected personally and collectively, and viewed this as important. -- These five studies point out that MA thesis research is and can be a useful tool for increasing reflection doing with personal and professional development, as well as integrating theory and practice. The studies suggest that more advantage could be taken of the MA thesis research project. More integration of working and studying could and should be made possible for teacher students. This could be done in various ways within teacher education, but the MA thesis should be seen as a pedagogical possibility.

Physical characterization of plastic surfaces in wearing and cleanability research

Plastic surfaces are a group of materials used for many purposes. The present study was focused on methods for investigation of surface topography, wearing and cleanability of polyvinyl chloride (PVC) model surfaces and industrial plastic surfaces. Contact profilometry, scanning electron microscopy (SEM) and atomic force microscopy (AFM) are powerful methods for studying the topography of plastic surfaces. Although they have their own limitations, they are together an effective tool providing useful information on surface topography, especially when studying laboratory-made PVC model surfaces with known chemical compositions and structures. All examined laboratory-made PVC plastic surfaces examined in this work could be considered as smooth according to both AFM and profilometer measurements because height differences are in the nanoscale on every surface. Industrial plastic surfaces are a complex group of materials because of their chemical and topographical heterogeneity, but they are nevertheless important reference materials when developing cleaning and wearing methods. According to the results of this study the Soiling and Wearing Drum and the Frick-Taber methods are very useful when simulating three-body wearing of plastic surfaces. Both the investigated wearing methods can be used to compare the wearing of different plastic materials using appropriate evaluation methods of wearing and industrial use. In this study, physical methods were developed and adapted from other fields of material research to cleanability studies. The thesis focuses on the methodology for investigating the cleanability of plastic surfaces under realistic conditions, where surface topography and the effect of wear cleanability were among the major topics. A colorimetric method proved to be suitable for examining the cleanability of the industrial plastic surfaces. The results were utilized to evaluate the relationship between cleanability and the surface properties of plastic surfaces. The devices and methods used in the work can be utilized both in material research and product development.

Socialist Realism instead of Formalism : the Formation and Development of the Soviet Music Control System 1932-1950

Whereas it has been widely assumed in the public that the Soviet music policy system had a “top-down” structure of control and command that directly affected musical creativity, in fact my research shows that the relations between the different levels of the music policy system were vague, and the viewpoints of its representatives differed from each other. Because the representatives of the party and government organs controlling operas could not define which kind of music represented Socialist Realism, the system as it developed during the 1930s and 1940s did not function effectively enough in order to create such a centralised control of Soviet music, still less could Soviet operas fulfil the highly ambiguous aesthetics of Socialist Realism. I show that musical discussions developed as bureaucratic ritualistic arenas, where it became more important to reveal the heretical composers, making scapegoats of them, and requiring them to perform self-criticism, than to give directions on how to reach the artistic goals of Socialist Realism. When one opera was found to be unacceptable, this lead to a strengthening of control by the party leadership, which lead to more operas, one after the other, to be revealed as failures. I have studied the control of the composition, staging and reception of the opera case-studies, which remain obscure in the West despite a growing scholarly interest in them, and have created a detailed picture of the foundation and development of the Soviet music control system in 1932-1950. My detailed discussion of such case-studies as Ivan Dzerzhinskii’s The Quiet Don, Dmitrii Shostakovich’s Lady Macbeth of Mtsensk District, Vano Muradeli’s The Great Friendship, Sergei Prokofiev’s Story of a Real Man, Tikhon Khrennikov’s Frol Skobeev and Evgenii Zhukovskii’s From All One’s Heart backs with documentary precision the historically revisionist model of the development of Soviet music. In February 1948, composers belonging to the elite of the Union of Soviet Composers, e.g. Dmitri Shostakovich and Sergei Prokofiev, were accused in a Central Committee Resolution of formalism, as been under the influence of western modernism. Accusations of formalism were connected to the criticism of the conciderable financial, material and social privileges these composers enjoyed in the leadership of the Union. With my new archival findings I give a more detailed picture of the financial background for the 1948 campaign. The independent position of the music funding organization of the Union of Soviet Composers (Muzfond) to decide on its finances was an exceptional phenomenon in the Soviet Union and contradicted the strivings to strengthen the control of Soviet music. The financial audits of the Union of Soviet Composers did not, however, change the elite status of some of its composers, except for maybe a short duration in some cases. At the same time the independence of the significal financial authorities of Soviet theatres was restricted. The cuts in the governmental funding allocated to Soviet theatres contradicted the intensified ideological demands for Soviet operas.

Effects of recreational use and fragmentation on the understorey vegetation and soil microbial communities of urban forests in southern Finland

The impacts of fragmentation and recreational use on the hemiboreal urban forest understorey vegetation and the microbial community of the humus layer (the phospholipid fatty acid (PLFA) pattern, microbial biomass and microbial activity, measured as basal respiration) were examined in the greater Helsinki area, southern Finland. Trampling tolerance of 1) herb-rich OMT, 2) mesic MT, and 3) sub-xeric VT forests (in decreasing order of fertility) was studied by comparing relative understorey vegetation cover (urban/untrampled reference ratio) of the three forest types. The trampling tolerance of forest vegetation increased with the productivity of the site (sub-xeric < mesic < herb-rich). Wear of understorey vegetation correlated positively with the number of residents (i.e., recreational pressure) around the forest patch. An increase of 15000 residents within a radius of 1 km around a forest patch was associated with ca. 30% decrease in the relative understorey vegetation cover. The cover of dwarf shrub Vaccinium myrtillus in particular decreased with increasing levels of wear. The cover of mosses in urban forests was less than half of that in untrampled reference areas. Cover of tree saplings, mainly Sorbus aucuparia, and some resilient herbs was higher than in the reference areas. In small urban forest fragments, broad-leaved trees, grasses and herbs were more abundant and mosses were scarcer than in larger urban forest areas. Thus, due to trampling and edge effects, resilient herb and grass species are replacing sensitive dwarf shrubs, mosses and lichens in urban forests. Differences in the soil microbial community structure were found between paths and untrampled areas and the effects of paths extended more than one meter from the paths. Paths supported approximately 25-30% higher microbial biomass with a transition zone of at least 1 m from the path edge. However, microbial activity per unit of biomass was lower on paths than in untrampled areas. Furthermore, microbial biomass and activity were 30-45% lower at the first 20 m into the forest fragments, due to low moisture content of humus near the edge. The decreased microbial activity detected at forest edges and paths implies decreased litter decomposition rates, and thus, a change in nutrient cycling. Changes in the decomposition and nutrient supply may in turn affect the diversity and function of plant communities in urban forests. Keywords: boreal forest vegetation, edge effects, phospholipid fatty acids, trampling, urban woodlands, wear

Benthic-pelagic coupling in the northern Baltic Sea: importance of bioturbation and benthic predation

Benthic-pelagic coupling describes processes that operate across and between the seafloor and open-water ecosystems. In soft-sediment communities, bioturbation by sediment-dwelling and epibenthic organisms may strongly shape habitat characteristics and influence processes, e.g. biogeochemical cycling, which supplies bioavailable nutrients to pelagic primary producers. In addition, benthic fauna may mediate benthic-pelagic coupling by affecting the survival and hatching of zooplankton dormant eggs in the sediment. In the shallow waters and seasonally fluctuating environment of the Baltic Sea, emergence from the seafloor essentially contributes to the dynamics of zooplankton pelagic populations. In this thesis, I examine how benthic organisms with different functional traits affect the link between the benthic and pelagic systems in the northern Baltic Sea. By means of experimental laboratory studies, the effects of sediment-dwelling (Monoporeia affinis, Macoma balthica and Marenzelleria spp.) and nectobenthic (Mysis spp.) taxa on the survival and hatching of zooplankton benthic eggs and on benthic nutrient fluxes and sediment structure were investigated. In the predation studies, the nectobenthic mysids Mysis spp. preyed upon benthic eggs of the cladoceran Bosmina longispina maritima (syn. B. coregoni maritima), both in pelagic and benthic environments. Of the sediment-dwelling species, the amphipod M. affinis and the bivalve M. balthica reduced the number of cladoceran eggs in the sediment, whereas the polychaetes Marenzelleria spp. had no effects on cladoceran eggs. Both M. balthica and M. affinis also increased the mortality rates of benthic eggs of copepods and rotifers. It was estimated that zooplankton eggs provide an additional carbon source for food-limited benthic communities. The results indicate that predation pressure on zooplankton benthic eggs may be strong, but varies widely depending on the season and the functional characteristics of the macrofauna. Macoma balthica buried cladoceran eggs and a fluorescent tracer from the sediment surface to a depth of 3 4 cm, indicating efficient sediment mixing. In contrast, the other taxa had fewer effects on particle distributions. In addition to organic matter mineralization, particle mixing is crucial to the success of benthic recruitment of zooplankton, since only eggs close to the sediment surface may hatch. Macoma balthica and M. affinis altered the patterns of zooplankton emergence from the sediment. In general, the highest emergence rates were observed in the absence of macroscopic fauna, and M. balthica exerted a stronger suppressive effect than M. affinis. Moreover, copepods were less severely affected than cladocerans, while only one species (Temora longicornis) clearly benefited from the presence of the macrofauna. These differences probably result from species-specific differences in the resistance of eggs to disturbances. The results show that benthic fauna may considerably alter the patterns of zooplankton emergence from the seafloor, thereby shaping zooplankton pelagic populations. The semi-motile M. balthica and Marenzelleria spp. increased the fluxes of phosphate and ammonium from the sediment to the water, whereas the motile M. affinis and Mysis mixta had a contrasting effect. In the eutrophied Baltic Sea, efficient internal cycling of bioavailable nutrients forms a strong feedback inhibiting the recovery of the ecosystem. Based on the results, a change in species dominance from the two motile taxa, susceptible to oxygen deficiency, to the more tolerant semi-motile taxa provides additional feedback, strengthening internal nutrient cycling and accelerating eutrophication, with deteriorating near-bottom oxygen conditions and changes in the benthic communities. In shallow-water ecosystems, benthic nutrient regeneration plays a key role in determining the overall productivity of the ecosystem. In addition, the results of this study show that the communities in the benthos may essentially contribute to the structure of those in the plankton.

The effects of habitat edges and trampling intensity on vegetation in urban forests

Although changes in urban forest vegetation have been documented in previous Finnish studies, the reasons for these changes have not been studied explicitly. Especially, the consequences of forest fragmentation, i.e. the fact that forest edges receive more solar radiation, wind and air-borne nutrients than interiors have been ignored. In order to limit the change in urban forest vegetation we need to know why it occurs. Therefore, the effects of edges and recreational use of urban forests on vegetation were investigated together in this thesis to reveal the relative strengths of these effects and to provide recommendations for forest management. Data were collected in the greater Helsinki area (in the cities of Helsinki, Vantaa and Espoo, and in the municipalities of Sipoo and Tuusula) and in the Lahti region (in the city of Lahti and in the municipality of Hollola) by means of systematic and randomized vegetation and soil sampling and tree measurements. Sample plots were placed from the forest edges to the interiors to investigate the effects of forest edges, and on paths of different levels of wear and off these paths to investigate the effects of trampling. The natural vegetation of mesic and sub-xeric forest site types studied was sensitive both to the effects of the edge and to trampling. The abundances of dwarf shrubs and bryophytes decreased, while light- and nitrogen-demanding herbs and grasses - and especially Sorbus aucuparia – were favoured at the edges and next to the paths. Results indicated that typical forest site types at the edges are changing toward more nitrophilic vegetation communities. Covers of the most abundant forest species decreased considerably – even tens of percentages – from interiors to the edges indicating strong edge effects. These effects penetrated at least up to 50 m from the forest edges into the interiors, especially at south to west facing open edges. The effects of trampling were pronounced on paths and even low levels of trampling decreased the abundances of certain species considerably. The effects of trampling extended up to 8 m from path edges. Results showed that the fragmentation of urban forest remnants into small and narrow patches should be avoided in order to maintain natural forest understorey vegetation in the urban setting. Thus, urban forest fragments left within urban development should be at least 3 ha in size, and as circular as possible. Where the preservation of representative original forest interior vegetation is a management aim, closed edges with conifers can act as an effective barrier against solar radiation, wind and urban load, thereby restricting the effects of the edge. Tree volume at the edge should be at least 225-250 m3 ha-1 and the proportion of conifers (especially spruce) 80% or more of the tree species composition. Closed, spruce-dominated edges may also prevent the excessive growth of S. aucuparia saplings at urban forest edges. In addition, closed edges may guide people’s movements to the maintained paths, thus preventing the spontaneous creation of dense path networks. In urban areas the effects of edges and trampling on biodiversity may be considerable, and are important to consider when the aim of management is to prevent the development of homogeneous herb-grass dominated vegetation communities, as was observed at the investigated edges.