Irradiation-mediated tailoring of carbon nanotubes

The ever-increasing demand for faster computers in various areas, ranging from entertaining electronics to computational science, is pushing the semiconductor industry towards its limits on decreasing the sizes of electronic devices based on conventional materials. According to the famous law by Gordon E. Moore, a co-founder of the world s largest semiconductor company Intel, the transistor sizes should decrease to the atomic level during the next few decades to maintain the present rate of increase in the computational power. As leakage currents become a problem for traditional silicon-based devices already at sizes in the nanometer scale, an approach other than further miniaturization is needed to accomplish the needs of the future electronics. A relatively recently proposed possibility for further progress in electronics is to replace silicon with carbon, another element from the same group in the periodic table. Carbon is an especially interesting material for nanometer-sized devices because it forms naturally different nanostructures. Furthermore, some of these structures have unique properties. The most widely suggested allotrope of carbon to be used for electronics is a tubular molecule having an atomic structure resembling that of graphite. These carbon nanotubes are popular both among scientists and in industry because of a wide list of exciting properties. For example, carbon nanotubes are electronically unique and have uncommonly high strength versus mass ratio, which have resulted in a multitude of proposed applications in several fields. In fact, due to some remaining difficulties regarding large-scale production of nanotube-based electronic devices, fields other than electronics have been faster to develop profitable nanotube applications. In this thesis, the possibility of using low-energy ion irradiation to ease the route towards nanotube applications is studied through atomistic simulations on different levels of theory. Specifically, molecular dynamic simulations with analytical interaction models are used to follow the irradiation process of nanotubes to introduce different impurity atoms into these structures, in order to gain control on their electronic character. Ion irradiation is shown to be a very efficient method to replace carbon atoms with boron or nitrogen impurities in single-walled nanotubes. Furthermore, potassium irradiation of multi-walled and fullerene-filled nanotubes is demonstrated to result in small potassium clusters in the hollow parts of these structures. Molecular dynamic simulations are further used to give an example on using irradiation to improve contacts between a nanotube and a silicon substrate. Methods based on the density-functional theory are used to gain insight on the defect structures inevitably created during the irradiation. Finally, a new simulation code utilizing the kinetic Monte Carlo method is introduced to follow the time evolution of irradiation-induced defects on carbon nanotubes on macroscopic time scales. Overall, the molecular dynamic simulations presented in this thesis show that ion irradiation is a promisingmethod for tailoring the nanotube properties in a controlled manner. The calculations made with density-functional-theory based methods indicate that it is energetically favorable for even relatively large defects to transform to keep the atomic configuration as close to the pristine nanotube as possible. The kinetic Monte Carlo studies reveal that elevated temperatures during the processing enhance the self-healing of nanotubes significantly, ensuring low defect concentrations after the treatment with energetic ions. Thereby, nanotubes can retain their desired properties also after the irradiation. Throughout the thesis, atomistic simulations combining different levels of theory are demonstrated to be an important tool for determining the optimal conditions for irradiation experiments, because the atomic-scale processes at short time scales are extremely difficult to study by any other means.

Syntheses and Self-Assembling Characteristics of Amphiphilic Star Diblock Copolymers

Uusien polymeeripohjaisten teknologioiden ja materiaalien myötä räätälöityjen polymeerien tarve on kasvanut. Viime vuosituhannen lopussa kehitetyt kontrolloidut polymerointimenetelmät ovat avanneet uusia mahdollisuuksia paitsi monimutkaisten polymeerien synteesiin, myös itsejärjestyvyyteen perustuvien funktionaalisten nanorakenteiden suunnitteluun ja valmistukseen. Nämä voivat jäljitellä luonnossa esiintyviä rakenteita, joita muodostavat esimerkiksi lipidit ja proteiinit. Itsejärjestyvät molekyylit ovat usein amfifiilisiä eli ne koostuvat hydrofiilisistä ja hydrofobisista osista ja polymeereissä nämä osat voivat olla omina lohkoinaan, jolloin puhutaan amfifiilisistä lohko- tai blokkikopolymeereistä. Riippuen järjestyneiden rakenteiden koostumuksesta ja muodosta, amfifiilisiä blokkikopolymeerejä on tutkittu tai jo käytetty nanoteknologiassa, elastomeereissä, voiteluaineissa, pinta-aktiivisina aineina, lääkkeenannostelussa, maaleissa, sekä elektroniikka-, kosmetiikka- ja elintarviketeollisuudessa. Tavallisimmin käytetyt amfifiiliset blokkikopolymeerit ovat olleet lineaarisia, mutta viime aikoina tutkimus on suuntautunut kohti monimutkaisempia rakenteita. Tällaisia ovat esimerkiksi tähtipolymeerit. Tähtimäisissä polymeereissä miselleille tyypillinen ydin-kuori-rakenne säilyy hyvin alhaisissakin polymeerikonsentraatioissa, koska polymeeriketjut ovat kiinni toisissaan yhdessä pisteessä. Siten ne ovat erityisen kiinnostavia tutkimuskohteita erilaisten hydrofobisten orgaanisten yhdisteiden sitomiseksi ja vapauttamiseksi. Tässä työssä on tarkasteltu amfifiilisten tähtipolymeerien itsejärjestymistä vesiliuoksissa sekä kokeellisesti ja tietokonesimulaatioin. Työ koostuu kahdesta osasta: tähtipolymeerien synteesistä makrosyklisillä initiaattoreilla ja amfifiilisten tähtimäisten blokkikopolymeerien ominaisuuksien tutkimisesta.

Atomic Layer Deposition of Multicomponent Oxide Materials

Atomic layer deposition (ALD) is a method for thin film deposition which has been extensively studied for binary oxide thin film growth. Studies on multicomponent oxide growth by ALD remain relatively few owing to the increased number of factors that come into play when more than one metal is employed. More metal precursors are required, and the surface may change significantly during successive stages of the growth. Multicomponent oxide thin films can be prepared in a well-controlled way as long as the same principle that makes binary oxide ALD work so well is followed for each constituent element: in short, the film growth has to be self-limiting. ALD of various multicomponent oxides was studied. SrTiO3, BaTiO3, Ba(1-x)SrxTiO3 (BST), SrTa2O6, Bi4Ti3O12, BiTaO4 and SrBi2Ta2O9 (SBT) thin films were prepared, many of them for the first time by ALD. Chemistries of the binary oxides are shown to influence the processing of their multicomponent counterparts. The compatibility of precursor volatilities, thermal stabilities and reactivities is essential for multicomponent oxide ALD, but it should be noted that the main reactive species, the growing film itself, must also be compatible with self-limiting growth chemistry. In the cases of BaO and Bi2O3 the growth of the binary oxide was very difficult, but the presence of Ti or Ta in the growing film made self-limiting growth possible. The application of the deposited films as dielectric and ferroelectric materials was studied. Post-deposition annealing treatments in different atmospheres were used to achieve the desired crystalline phase or, more generally, to improve electrical properties. Electrode materials strongly influenced the leakage current densities in the prepared metal insulator metal (MIM) capacitors. Film permittivities above 100 and leakage current densities below 110-7 A/cm2 were achieved with several of the materials.

The effects of low-intensity ultrasound in bioabsorbable self-reinforced poly-L-lactide -fixed cancellous bone fracture

The purpose of the present study was to investigate the effects of low-intensity ultrasound on bioabsorbable self-reinforced poly-L-lactide (SR-PLLA) screws and on fracture healing after SR-PLLA device fixation in experimental and clinical cancellous bone fracture. In the first experimental study, the assessment of the mechanical strengths of the SR-PLLA screws was performed after 12 weeks of daily 20-minute ultrasound exposure in vitro. In the second experimental study, 32 male Wistar rats with an experimental distal femur osteotomy fixed with an SR-PLLA rod were exposed for daily low-intensity ultrasound treatment for 21 days. The effects on the healing bone were assessed. The clinical studies consist of three prospective, randomized, and placebo-controlled series of dislocated lateral malleolar fractures fixed with one SR-PLLA screw. The total number of the patients in these series was 52. Half of the patients were provided randomly with a sham ultrasound device. The patients underwent ultrasound therapy 20 minutes daily for six weeks. Radiological bone healing was assessed both by radiographs at two, six, nine, and 12 weeks and by multidetector computed tomography (MDCT) scans at two weeks, nine weeks, and 18 months. Bone mineral density was assessed by dual-energy X-ray absorptiometry (DXA). The clinical outcome was assessed by both Olerud-Molander scoring and clinical examination of the ankle. Low-intensity ultrasound had no effects on the mechanical properties and degradation behaviour of the SR-PLLA screws in vitro. There were no obvious signs of low-intensity ultrasound-induced enhancement in the bone healing in SR-PLLA-rod-fixed metaphyseal distal femur osteotomy in rats. The biocompatibility of low-intensity ultrasound treatment and SR-PLLA was found to be good. In the clinical series low-intensity ultrasound was observed to have no obvious effects on the bone mineral density of the fractured lateral malleolus. There were no obvious differences in the radiological bone healing times of the SR-PLLA-screw-fixed lateral malleolar fractures after low-intensity ultrasound treatment. Low-intensity ultrasound did not have any effects on radiological bone morphology, bone mineral density or clinical outcome 18 months after the injury. There were no obvious findings in the present study to support the hypothesis that low-intensity pulsed ultrasound enhances bone healing in SR-PLLA-rod-fixed experimental metaphyseal distal femur osteotomy in rats or in clinical SR-PLLA-screw-fixed lateral malleolar fractures. It is important to limit the conclusions of the present set of studies only to lateral malleolar fractures fixed with an SR-PLLA screw.

Bioabsorbable materials for osteosynthesis and small joint arthroplasty in the hand

Fractures and arthritic joint destruction are common in the hand. A reliable and stable fracture fixation can be achieved by metal implants, which however, become unnecessary or even harmful after consolidation. The silicone implant arthroplasty is the current method of choice for reconstruction of metacarpophalangeal joints in rheumatoid patients. However, the outcome tends to worsen with long-term follow-up and implant-related complications become frequent. To address these problems, bioabsorbable implants were designed for the hand area. Aims of the studies were: 1) to evaluate the biomechanical stabilities provided by self- reinforced (SR) bioabsorbable implants in a transverse and an oblique osteotomy of small tubular bones and to compare them with those provided by metal implants; 2) to evaluate the SR poly-L/DL-lactide 70/30 plate for osteosynthesis in a proof-of-principle type of experiment in three cases of hand injuries; and 3) to evaluate the poly-L/D-lactide (PLA) 96/4 joint scaffold, a composite joint implant with a supplementary intramedullary Polyactive® stem and Swanson silicone implant in an experimental small joint arthroplasty model. Methods used were: 1) 112 fresh frozen human cadaver and 160 pig metacarpal bones osteotomised transversally or obliquely, respectively, and tested ex vivo in three point bending and in torsion; 2) three patient cases of complex hand injuries; and 3) the fifth metacarpophalangeal joints reconstructed in 18 skeletally-mature minipigs and studied radiologically and histologically. The initial fixation stabilities provided by bioabsorbable implants in the tubular bones of the hand were comparable with currently-employed metal fixation techniques, and were sufficient for fracture stabilisation in three preliminary cases in the hand. However, in torsion the stabilities provided by bioabsorbable implants were lower than that provided by metal counterparts. The bioabsorbable plate enhanced the bending stability for the bioabsorbable fixation construct. PLA 96/4 joint scaffolds demonstrated good biocompatibility and enabled fibrous tissue in-growth in situ. After scaffold degradation, a functional, stable pseudarthrosis with dense fibrous connective tissue was formed. However, the supplementary Polyactive® stem caused a deleterious tissue reaction and therefore the stem can not be applied to the composite joint implant. The bioabsorbable implants have potential for use in clinical hand surgery, but have to await validation in clinical patient series and controlled trials.

Death, Ancestors, and HIV/AIDS among the Akan of Ghana

This is a study of crises caused by HIV/AIDS among the Akan of Ghana. It creates more awareness about the epidemic and has indicated other possible paths for campaign strategies. The pandemic has many devastating consequences; yet new infections are recorded daily despite campaigns against the disease. The search for therapy often sees the use of multiple outlets, which expresses Ghana's pluralistic medical system based on Kleinman's sector analytical model involving Western medicine, self-therapy, and folk healing. But it also leaves individuals and kin members in financial quandary. The fieldwork for this study is mainly through participant observation lasting 13 months (February 2003 to March 2004) among the Akan; in addition, some archival materials have been used. The Akan people live in the coastal south and forest zone of Ghana. Every Akan village or town is made up of corporate lineages, and social organisation is based on matrilineal descent. The society is holistic because the matrilineages seek the welfare of all their members. Meyer Fortes, R. S. Rattray and others on the Akan noticed this encompassing nature in the lineage organisation; but they did not make it salient (or failed to notice it) during illness, efforts for healing, and the care of the sick member. HIV/AIDS is an illness which shows the encompassing nature of the Akan matrilineage. It also reveals many contradictions in the group, viz. stigmatisation, abandonment, and attitudes that do not express altruism in a group expected to be closely-knit based on members' belief that they are of the 'same blood'. The crises have been analyzed in the total social system because the disease creates breaches at various levels of social interaction. An analysis of crises in a group is not far-fetched; Victor Turner has shown the way among the Ndembu and has revealed the contraditions in the seemingly uneventful life in the group. This study has identified that in dealing with HIV/AIDS patients and crises about the disease we are dealing with 'holistic' patients. Their cases produce many changes in the matrilineal structure--many orphans are being created and the care of patients is increasingly falling on the elderly. HIV/AIDS also challenges Akan cosmology because, for example, an AIDS death in local notions is a 'bad' demise which fails to produce ancestors who reproduce the society through reincarnation. Campaigns could emphasize this notion. The study begins with a description of the holistic nature of Akan matriliny, and the patients have been described as 'holistic' because their crises affect other people in the holistic society. Chapter 2 discusses the importance of ancestors as the starting points for social order who are constantly revered (in rites invoving the chief, Chapter 4). Chapter 3 focuses on funerals as an important social performance for the welfare of the dead and the living. Chapter 5 concentrates on HIV/AIDS as an illness threat marked by dominant discourses such as poverty, sexuality, migration, and condom use. Chapter 6 analyzes the attempts for therapy, and traditional healers' claims to have a cure. The efforts for therapy continues with spiritual church healing in Chapter 7, and chapter 8 is devoted to care of the patients and its inherent crises. Chapter 9 analyzes the effects of HIV/AIDS afflictions and AIDS deaths on the matrilineal group and in society. The study ends with a short part, devoted to Recommendations based on the findings in this investigation.

Depression in / by / for women : agency, feminism and self-help in groups

Depression in / by / for Women: Agency, Feminism and Self-Help in Groups on ensimmäinen väitöstasoinen tutkimus feministisestä terapiasta Suomessa sijoittuen psykologian, sosiaalitieteellisen mielenterveystutkimuksen sekä feministisen tutkimuksen alueille. Perinteisen näkemyksen mukaan feministisen tutkimuksen tulee olla ”naisista, naisten tekemää ja naisille kohdistettua”. Naiset ja masennus -projektitutkimus keskittyy naisten kokemaan masennukseen sisältäen mahdollisen miesten sekä patriarkaalisen hyvinvointivaltion osuuden masennukseen. Masennusta kokevat naiset ovat tutkimuksessa sekä tutkimuksen kohteena että aktiivisia osanottajia, mikä tuo heidän äänensä kuuluville. Tutkimus perustuu vuosien 1994-2000 välisenä aikana kerättyyn 11 ryhmän osallistujia koskevaan kvalitatiivisiin ja kvantitatiivisiin aineistoon. Irmeli Laitinen on ollut suunnittelemassa, keräämässä ja analysoimassa sitä yhdessä projektin muiden jäsenten kanssa. Tutkimuksessa mitattiin kuinka ryhmiin osallistuvien seka masennuksen tunteet että toiminnat muuttuivat yhden vuoden aikana. Tutkimuksen tavoitteena oli sekä masennuksesta kärsivien naisten osallistuminen feministiseen toimintatutkimukseen että ammatillisesti ohjatun oma-apuryhmämenetelmän kehittäminen suomalaiseen mielenterveyspalveluun. Projektin tutkimustulosten mukaan siihen osallistuneet naiset voimaantuivat ymmärtämään itseään sekä saivat luottamusta sosiaaliisiin taitoihinsa. Pidemmällä aikavälillä naisten tunteet muuttuivat myönteisiksi, heidän suhteensa itseensä positiivisemmaksi ja he aktivoituivat fyysisesti. Lisäksi tutkimustulokset viittaavat siihen, että masennus voi johtua näkymättömästä, sukupuolisesti virittyneestä jännitteestä naisystävällisessä hyvinvointivaltiossa paljastaen ”hyvinvointimasennusoireilun”. Suomalaisen sosiologi Erik Allardtin hyvinvointitypologian - having, loving, being – mukaisesti nämä ryhmään osallistuvat naiset eivät koe puutteita niinkään materiaalisessa hyvinvoinnissa (having) vaan pikeminkin suhteiden, sosiaalisen ja emotionaalisen hyvinvoinnin ulottuvuuksilla (loving ja being). Se, että masentuneet naiset pystyvät tuomaan esille pitkään vaiennettuja kokemuksiaan, voi merkitä paljon heidän paranemisessaan ja voimaantumisessaan. Ammatillisesti ohjatut oma-apuryhmät ja naisystävälliset hoitokäytännöt mahdollistivat tämänkaltaisen paranemisprosessin alkamisen tutkimukseen osallistuneissa ryhmissä.