Effect of colostrum feeding method and presence of dam on the sleep, rest and sucking behaviour of newborn calves

"In rats, sucking milk reduces anxiety and promotes non-rapid eye movement (NREM) sleep, and in calves it induces resting but the effect on sleep is unknown. Here, we investigated how calves' sleep was affected by colostrum feeding methods. Forty-one calves were blocked by birth date and randomly allotted within blocks to the experimental treatments. Calves were housed for four days either with their dam (DAM) or individually with warm colostrum feeding (2 L four times a day) from either a teat bucket (TEAT) or an open bucket (BUCKET). DAM calves suckled their dam freely. Calves' sleeping and sucking behaviour was filmed continuously for 48 h at the ages of two and three days. Behavioural sleep (BS) was defined as calves resting at least 30 s with their head still and raised (non-rapid eye movement) or with their head against their body or the ground (rapid eye movement, REM). Latency from the end of colostrum feeding to the start of BS was recorded. We compared behaviour of TEAT calves with that of DAM and BUCKET calves using mixed models. Milk meal duration was significantly longer for TEAT calves than for BUCKET calves (mean +/- S.E.M.; 8.3 +/- 0.6 min vs. 5.2 +/- 0.6 min), but equal to that of DAM calves. We found no effect of feeding method on the duration of daily BS (12 h 59 min I h 38 min) but we found a tendency for the daily amount of NREM sleep; BUCKET calves had less NREM sleep per day than TEAT calves (6 h 18 min vs. 7 h 48 min, S.E.M. = 45 min) and also longer latencies from milk ingestion to BS (21.9 +/- 2.0 min vs. 16.2 +/- 2.0 min). DAM calves slept longer bouts than TEAT calves (10.8 +/- 1.0 min vs. 8.3 +/- 1.0 min) and less often (78 +/- 4 vs. 92 +/- 4). Sucking colostrum from a teat bucket compared with drinking from an open"

Effect of waiting time on health outcomes and service utilization : A prospective randomized study on patients admitted to hospital for hip or knee replacement

Although the principle of equal access to medically justified treatment has been promoted by official health policies in many Western health care systems, practices do not completely meet policy targets. Waiting times for elective surgery vary between patient groups and regions, and growing problems in the availability of services threaten equal access to treatment. Waiting times have come to the attention of decision-makers, and several policy initiatives have been introduced to ensure the availability of care within a reasonable time. In Finland, for example, the treatment guarantee came into force in 2005. However, no consensus exists on optimal waiting time for different patient groups. The purpose of this multi-centre randomized controlled trial was to analyse health-related quality of life, pain and physical function in total hip or knee replacement patients during the waiting time and to evaluate whether the waiting time is associated with patients health outcomes at admission. This study also assessed whether the length of waiting time is associated with social and health services utilization in patients awaiting total hip or knee replacement. In addition, patients health-related quality of life was compared with that of the general population. Consecutive patients with a need for a primary total hip or knee replacement due to osteoarthritis were placed on the waiting list between August 2002 and November 2003. Patients were randomly assigned to a short waiting time (maximum 3 months) or a non-fixed waiting time (waiting time not fixed in advance, instead the patient followed the hospitals routine practice). Patients health-related quality of life was measured upon being placed on the waiting list and again at hospital admission using the generic 15D instrument. Pain and physical function were evaluated using the self-report Harris Hip Score for hip patients and a scale modified from the Knee Society Clinical Rating System for knee patients. Utilization measures were the use of home health care, rehabilitation and social services, physician visits and inpatient care. Health and social services use was low in both waiting time groups. The most common services used while waiting were rehabilitation services and informal care, including unpaid care provided by relatives, neighbours and volunteers. Although patients suffered from clear restrictions in usual activities and physical functioning, they seemed primarily to lean on informal care and personal networks instead of professional care. While longer waiting time did not result in poorer health-related quality of life at admission and use of services during the waiting time was similar to that at the time of placement on the list, there is likely to be higher costs of waiting by people who wait longer simply because they are using services for a longer period. In economic terms, this would represent a negative impact of waiting. Only a few reports have been published of the health-related quality of life of patients awaiting total hip or knee replacement. These findings demonstrate that, in addition to physical dimensions of health, patients suffered from restrictions in psychological well-being such as depression, distress and reduced vitality. This raises the question of how to support patients who suffer from psychological distress during the waiting time and how to develop strategies to improve patients initiatives to reduce symptoms and the burden of waiting. Key words: waiting time, total hip replacement, total knee replacement, health-related quality of life, randomized controlled trial, outcome assessment, social service, utilization of health services

The effect of temperature on height growth of Scots pine in northern Finland

The effect of temperature on height growth of Scots pine in the northern boreal zone in Lapland was studied in two different time scales. Intra-annual growth was monitored in four stands in up to four growing seasons using an approximately biweekly measurement interval. Inter-annual growth was studied using growth records representing seven stands and five geographical locations. All the stands were growing on a dry to semi-dry heath that is a typical site type for pine stands in Finland. The applied methodology is based on applied time-series analysis and multilevel modelling. Intra-annual elongation of the leader shoot correlated with temperature sum accumulation. Height growth ceased when, on average, 41% of the relative temperature sum of the site was achieved (observed minimum and maximum were 38% and 43%). The relative temperature sum was calculated by dividing the actual temperature sum by the long-term mean of the total annual temperature sum for the site. Our results suggest that annual height growth ceases when a location-specific temperature sum threshold is attained. The positive effect of the mean July temperature of the previous year on annual height increment proved to be very strong at high latitudes. The mean November temperature of the year before the previous had a statistically significantly effect on height increment in the three northernmost stands. The effect of mean monthly precipitation on annual height growth was statistically insignificant. There was a non-linear dependence between length and needle density of annual shoots. Exceptionally low height growth results in high needle-density, but the effect is weaker in years of average or good height growth. Radial growth and next year s height growth are both largely controlled by current July temperature. Nevertheless, their growth variation in terms of minimum and maximum is not necessarily strongly correlated. This is partly because height growth is more sensitive to changes in temperature. In addition, the actual effective temperature period is not exactly the same for these two growth components. Yet, there is a long-term balance that was also statistically distinguishable; radial growth correlated significantly with height growth with a lag of 2 years. Temperature periods shorter than a month are more effective variables than mean monthly values, but the improvement is on the scale of modest to good when applying Julian days or growing-degree-days as pointers.

The effect of lignin content and lignin modification on Norway spruce wood properties and decay resistance

Three different Norway spruce cutting clones growing in three environments with different soil and climatic conditions were studied. The purpose was to follow variation in the radial growth rate, wood properties and lignin content and to modify wood lignin with a natural monolignol, coniferyl alcohol, by making use of inherent wood peroxidases. In addition, the incorporation of chlorinated anilines into lignin was studied with synthetic model compounds and synthetic lignin preparations to show whether unnatural compounds originating from pesticides could be bound in the lignin polymer. The lignin content of heartwood, sapwood and earlywood was determined by applying Fourier transform infrared (FTIR) spectroscopy and a principal component regression (PCR) technique. Wood blocks were treated with coniferyl alcohol by using a vacuum impregnation method. The effect of impregnation was assessed by FTIR and by a fungal decay test. Trees from a fertile site showed the highest growth rate and sapwood lignin content and the lowest latewood proportion, weight density and modulus of rupture (MOR). Trees from a medium fertile site had the lowest growth rate and the highest latewood proportion, weight density, modulus of elasticity (MOE) and MOR. The most rapidly growing clone showed the lowest latewood proportion, weight density, MOE and MOR. The slowest growing clone had the lowest sapwood lignin content and the highest latewood proportion, weight density, MOE and MOR. Differences between the sites and clones were small, while fairly large variation was found between the individual trees and growing seasons. The cutting clones maintained clone-dependent wood properties in the different growing sites although variation between trees was high and climatic factors affected growth. The coniferyl alcohol impregnation increased the content of different lignin-type phenolic compounds in the wood as well as wood decay resistance against a white-rot fungus, Coriolus versicolor. During the synthetic lignin preparation 3,4-dichloroaniline became bound by a benzylamine bond to β-O-4 structures in the polymer and it could not be released by mild acid hydrolysis. The natural monolignol, coniferyl alcohol, and chlorinated anilines could be incorporated into the lignin polymer in vivo and in vitro, respectively.

Acceleration of the Cosmological Expansion as an Effect of Inhomogeneities

The cosmological observations of light from type Ia supernovae, the cosmic microwave background and the galaxy distribution seem to indicate that the expansion of the universe has accelerated during the latter half of its age. Within standard cosmology, this is ascribed to dark energy, a uniform fluid with large negative pressure that gives rise to repulsive gravity but also entails serious theoretical problems. Understanding the physical origin of the perceived accelerated expansion has been described as one of the greatest challenges in theoretical physics today. In this thesis, we discuss the possibility that, instead of dark energy, the acceleration would be caused by an effect of the nonlinear structure formation on light, ignored in the standard cosmology. A physical interpretation of the effect goes as follows: due to the clustering of the initially smooth matter with time as filaments of opaque galaxies, the regions where the detectable light travels get emptier and emptier relative to the average. As the developing voids begin to expand the faster the lower their matter density becomes, the expansion can then accelerate along our line of sight without local acceleration, potentially obviating the need for the mysterious dark energy. In addition to offering a natural physical interpretation to the acceleration, we have further shown that an inhomogeneous model is able to match the main cosmological observations without dark energy, resulting in a concordant picture of the universe with 90% dark matter, 10% baryonic matter and 15 billion years as the age of the universe. The model also provides a smart solution to the coincidence problem: if induced by the voids, the onset of the perceived acceleration naturally coincides with the formation of the voids. Additional future tests include quantitative predictions for angular deviations and a theoretical derivation of the model to reduce the required phenomenology. A spin-off of the research is a physical classification of the cosmic inhomogeneities according to how they could induce accelerated expansion along our line of sight. We have identified three physically distinct mechanisms: global acceleration due to spatial variations in the expansion rate, faster local expansion rate due to a large local void and biased light propagation through voids that expand faster than the average. A general conclusion is that the physical properties crucial to account for the perceived acceleration are the growth of the inhomogeneities and the inhomogeneities in the expansion rate. The existence of these properties in the real universe is supported by both observational data and theoretical calculations. However, better data and more sophisticated theoretical models are required to vindicate or disprove the conjecture that the inhomogeneities are responsible for the acceleration.

Short-term Price Behavior and the Effect of Foreign Investors in Finnish Equity Markets (summary section only)

As globalization and capital free movement has increased, so has interest in the effects of that global money flow, especially during financial crises. The concern has been that large global money flows will affect the pricing of small local markets by causing, in particular, overreaction. The purpose of this thesis is to contribute to the body of work concerning short-term under- and overreaction and the short-term effects of foreign investment flow in the small Finnish equity markets. This thesis also compares foreign execution return to domestic execution return. This study’s results indicate that short-term under- and overreaction occurs in domestic-buy portfolios (domestic net buying) rather than in foreign-buy portfolios. This under- and overreaction, however, is not economically meaningful after controlling for the bid-ask bounce effect. Based on this finding, one can conclude that foreign investors do not have a destabilizing effect in the short-term in the Finnish markets. Foreign activity affects short-term returns. When foreign investors are net buyers (sellers) there are positive (negative) market adjusted returns. Literature related to nationality and institutional effect leads us to expect these kind of results. These foreign flows are persistent at a 5 % to 21 % level and the persistence of foreign buy flow is higher than the foreign sell flow. Foreign daily trading execution is worse than domestic execution. Literature which quantifies foreign investors as liquidity demanders and literature related to front-running leads us to expect poorer foreign execution than domestic execution.

The Effect of Obesity on Wages and Employment: The Difference Between Having a High BMI and Being Fat

In this paper, we re-examine the relationship between overweight and labour market success, using indicators of individual body composition along with BMI (Body Mass Index). We use the dataset from Finland in which weight, height, fat mass and waist circumference are not self-reported, but obtained as part of the overall health examination. We find that waist circumference, but not weight or fat mass, has a negative effect on wages for women, whereas all measures of obesity have negative effects on women’s employment probabilities. For men, the only obesity measure that is significant for men’s employment probabilities is fat mass. One interpretation of our findings is that the negative wage effects of overweight on wages run through the discrimination channel, but that the negative effects of overweight on employment have more to do with ill health. All in all, measures of body composition provide a more refined picture about the effects of obesity on wages and employment.

Determinants of Cognitive Impairment in Old Age and Their Genetic Architecture

Cognitive health is of central importance for independent and balanced old age, while memory disorders represent the leading cause of intensive and long-term care among the Finnish elderly. The aims of this study were to analyse the effect of height, body mass index, weight change, metabolic conditions and coffee drinking in midlife on cognitive performance in old age among a sample of 2606 Finnish twins aged 65 years or older who had participated in a telephone interview to assess their cognitive status. Since coffee drinking associates with several metabolic conditions and Finns are known to be the greatest consumers of coffee in the world, the heritability and stability of coffee drinking was analysed in the whole Older Finnish Twin Cohort (n=10716). In order to investigate the association between height and cognitive performance in a population with more supportive childhood living conditions, a total of 2161 Danish twins were included in this study. A greater height was found to clearly associate with better cognitive performance in Finnish subjects, but less so among the Danish sample, which may reflect the childhood environmental differences between these cohorts. In the Finnish subjects, there was greater variance in cognitive performance among shorter subjects, and environmental factors were found to play a greater role in their cognitive performance, whereas the cognitive performance of taller participants was mainly explained by genetic factors. Midlife metabolic variables that were found to be significantly associated with a poorer cognitive performance in old age included a higher body mass index and three metabolic conditions: cardiovascular disease, hypertension and, most significantly of all, diabetes. Moreover, both weight gain and loss, even to a lesser degree than suggested previously, were found to be associated with poorer cognition. Furthermore, evidence of a causal relationship between midlife cardiovascular disease and cognitive performance in old age was demonstrated among discordant twin pairs. Conversely, no effect of coffee drinking in midlife on cognitive performance in old age was observed, although coffee drinking was demonstrated to be stable in the study population. The heritability of coffee drinking was found to differ across sexes and age groups, being 51% in men and 52% in women in the whole study population. This study supports the contention that cognitive performance in old age reflects the effects of multiple genetic and environmental exposures, including their complex interactions during the life-span. The demonstrated associations and evidence of a causal pathway between potentially preventable exposures and poorer cognitive performance highlight the importance of preventive medicine.

Effect of water vapour stabilization of raw materials on the quality of the inhalation product

Generation of raw materials for dry powder inhalers by different size reduction methods can be expected to influence physical and chemical properties of the powders. This can cause differences in particle size, size distribution, shape, crystalline properties, surface texture and energy. These physical properties of powders influence the behaviour of particles before and after inhalation. Materials with an amorphous surface have different surface energy compared to materials with crystalline surface. This can affect the adhesion and cohesion of particles. Changes in the surface nature of the drug particles results in a change in product performance. By stabilization of the raw materials the amorphous surfaces are converted into crystalline surfaces. The primary aim of the study was to investigate the influence of the surface properties of the inhalation particles on the quality of the product. The quality of the inhalation product is evaluated by measuring the fine particle dose (FPD). FDP is the total dose of particles with aerodynamic diameters smaller than 5,0 μm. The secondary aim of this study was to achieve the target level of the FPD and the stability of the FPD. This study was also used to evaluate the importance of the stabilization of the inhalation powders. The study included manufacturing and analysing drug substance 200 μg/dose inhalation powder batches using non-stabilized or stabilized raw materials. The inhaler formulation consisted of micronized drug substance, lactose <100μm and micronized lactose <10μm. The inhaler device was Easyhaler®. Stabilization of the raw materials was done in different relative humidity, temperature and time. Surface properties of the raw materials were studied by dynamic vapour sorption, scanning electron microscopy and three-point nitrogen adsorption technique. Particle size was studied by laser diffraction particle size analyzer. Aerodynamic particle size distribution from inhalers was measured by new generation impactor. Stabilization of all three raw materials was successful. A clear difference between nonstabilized and stabilized raw materials was achieved for drug substance and lactose <10μm. However for lactose <100μm the difference wasn’t as clear as wanted. The surface of the non-stabilized drug substance was more irregular and the particles had more roughness on the surface compared to the stabilized drug substances particles surface. The surface of the stabilized drug particles was more regular and smoother than non-stabilized. Even though a good difference between stabilized and non-stabilized raw materials was achieved, a clear evidence of the effect of the surface properties of the inhalation particles on the quality of the product was not observed. Stabilization of the raw materials didn’t lead to a higher FPD. Possible explanations for the unexpected result might be too rough conditions in the stabilization of the drug substance or smaller than wanted difference in the degree of stabilization of the main component of the product <100μm. Despite positive effects on the quality of the product were not seen there appears to be some evidence that stabilized drug substance results in smaller particle size of dry powder inhalers.