Changing Lived Worlds of Contemporary Amazonian Native Young People : Manchineri Youths in the Reserve and the City, Brazil-Acre

This thesis discusses the contemporary construction of the lived worlds of indigenous Amazonian youths. Today’s native peoples are considerably affected by the processes of globalization and urbanization, which have led to new ways of relating to their cultural traditions. This work presents a case study of Manchineri youngsters aged between 14 and 24 years old living in Acre state in Brazilian Amazonia. The Arawak-speaking Manchineri number some 1,000 people; their legally demarcated reserve is situated next to the River Yaco. The research is based on ethnographic material collected in the Mamoadate reserve and in the state capital, Rio Branco. By comparing the youth in different physical and social environments (the reserve and the city), my attempt has been to search for the most typical elements maintained, altered and created in the current lived worlds of Manchineri youths. Fieldwork methods included interviews, participant observation, photographs, video recordings, and drawings. The material was analyzed within the multidisciplinary framework of the social and cultural construction of knowledge. The study applies the concepts of social field, symbolic capital, and habitus as they have been used by Pierre Bourdieu; perspective as developed recently in Amazonian ethnology; the sacred as a cultural category as understood in the study of religion; and individual and person as concepts central to anthropology and sociology. Additionally, the study can be contextualized within youth studies, Latin American studies, and urban studies. The results of the study show that the everyday lives of young Amazonian native people are formed by a complex mixture of ‘modernity’ and ‘tradition’, fragmentation, and transitions between different conceptual frameworks. Part II discusses the ethnographic material in depth and shows that indigenous adolescents act from a variety of social perspectives: the native youth’s own ethnic group, divided into sub-groups, especially into urban residents and those living in the reserve; ancestors, super-human agents and spirits; other indigenous groups and non-natives. Consequently, besides the traditional initiation ritual, we find various contemporary rites of passage to adulthood: state-education, learning traditional practices, shamanism, matrimony, and transitions between the reserve and urban areas. According to these results, new social roles, political organization, responsibilities, and in general the desire to be respected, require both ‘modern’ and ‘traditional’ abilities. In Part III, the study shows that the current power relations constituted by new social contacts, ethnic recognition, and cooperation with different institutions have resulted in the formation of new social fields: youth cultures, the ethnic group, shamanic practices, the ethnopolitical movement, and indigenous students. The capacity of young Amazonian Indians to act in contemporary social fields produces them as full persons. The study also argues that the elements of the lived worlds can be divided into these social fields. When focusing on these fields, it became evident that these comprise the strategies adopted by young Indians to break through social and cultural barriers.

Capillary electrochromatography: a versatile instrumental technique for nanodomain interaction studies

This doctoral thesis describes the development of a miniaturized capillary electrochromatography (CEC) technique suitable for the study of interactions between various nanodomains of biological importance. The particular focus of the study was low-density lipoprotein (LDL) particles and their interaction with components of the extracellular matrix (ECM). LDL transports cholesterol to the tissues through the blood circulation, but when the LDL level becomes too high the particles begin to permeate and accumulate in the arteries. Through binding sites on apolipoprotein B-100 (apoB-100), LDL interacts with components of the ECM, such as proteoglycans (PGs) and collagen, in what is considered the key mechanism in the retention of lipoproteins and onset of atherosclerosis. Hydrolytic enzymes and oxidizing agents in the ECM may later successively degrade the LDL surface. Metabolic diseases such as diabetes may provoke damage of the ECM structure through the non-enzymatic reaction of glucose with collagen. In this work, fused silica capillaries of 50 micrometer i.d. were successfully coated with LDL and collagen, and steroids and apoB-100 peptide fragments were introduced as model compounds for interaction studies. The LDL coating was modified with copper sulphate or hydrolytic enzymes, and the interactions of steroids with the native and oxidized lipoproteins were studied. Lipids were also removed from the LDL particle coating leaving behind an apoB-100 surface for further studies. The development of collagen and collagen decorin coatings was helpful in the elucidation of the interactions of apoB-100 peptide fragments with the primary ECM component, collagen. Furthermore, the collagen I coating provided a good platform for glycation studies and for clarification of LDL interactions with native and modified collagen. All methods developed are inexpensive, requiring just small amounts of biomaterial. Moreover, the experimental conditions in CEC are easily modified, and the analyses can be carried out in a reasonable time frame. Other techniques were employed to support and complement the CEC studies. Scanning electron microscopy and atomic force microscopy provided crucial visual information about the native and modified coatings. Asymmetrical flow field-flow fractionation enabled size measurements of the modified lipoproteins. Finally, the CEC results were exploited to develop new sensor chips for a continuous flow quartz crystal microbalance technique, which provided complementary information about LDL ECM interactions. This thesis demonstrates the potential of CEC as a valuable and flexible technique for surface interaction studies. Further, CEC can serve as a novel microreactor for the in situ modification of LDL and collagen coatings. The coatings developed in this study provide useful platforms for a diversity of future investigations on biological nanodomains.

Copper Diffusion Barrier Deposition on Integrated Circuit Devices by Atomic Layer Deposition Technique

Transfer from aluminum to copper metallization and decreasing feature size of integrated circuit devices generated a need for new diffusion barrier process. Copper metallization comprised entirely new process flow with new materials such as low-k insulators and etch stoppers, which made the diffusion barrier integration demanding. Atomic Layer Deposition technique was seen as one of the most promising techniques to deposit copper diffusion barrier for future devices. Atomic Layer Deposition technique was utilized to deposit titanium nitride, tungsten nitride, and tungsten nitride carbide diffusion barriers. Titanium nitride was deposited with a conventional process, and also with new in situ reduction process where titanium metal was used as a reducing agent. Tungsten nitride was deposited with a well-known process from tungsten hexafluoride and ammonia, but tungsten nitride carbide as a new material required a new process chemistry. In addition to material properties, the process integration for the copper metallization was studied making compatibility experiments on different surface materials. Based on these studies, titanium nitride and tungsten nitride processes were found to be incompatible with copper metal. However, tungsten nitride carbide film was compatible with copper and exhibited the most promising properties to be integrated for the copper metallization scheme. The process scale-up on 300 mm wafer comprised extensive film uniformity studies, which improved understanding of non-uniformity sources of the ALD growth and the process-specific requirements for the ALD reactor design. Based on these studies, it was discovered that the TiN process from titanium tetrachloride and ammonia required the reactor design of perpendicular flow for successful scale-up. The copper metallization scheme also includes process steps of the copper oxide reduction prior to the barrier deposition and the copper seed deposition prior to the copper metal deposition. Easy and simple copper oxide reduction process was developed, where the substrate was exposed gaseous reducing agent under vacuum and at elevated temperature. Because the reduction was observed efficient enough to reduce thick copper oxide film, the process was considered also as an alternative method to make the copper seed film via copper oxide reduction.

Responses of Scots pine to nickel and copper exposure and herbivory

The goal of this thesis was to examine the ecophysiological responses of Scots pine (Pinus sylvestris L.), with an emphasis on the oxidative enzyme peroxidase and plant phenolics to environmental stresses like elevated levels of nickel (Ni) and copper (Cu), and herbivory. The effects of Ni and Cu were studied in a gradient survey at a sulphur dioxide contaminated site in the Kola Peninsula, and with experiments in which seedlings were exposed to Ni mist or to Ni and Cu amended into the soil. In addition, experimental Ni exposure was combined with disturbance of the natural lichen cover of the forest ground layer. Pine sawfly attack was simulated in the early season defoliation experiment, in which mature Scots pine were defoliated (100 %) during two successive years in a dry, nutrient-poor Scots pine stand. In addition, the effect of previous defoliation on the growth of sawfly (Diprion pini L.) larvae was studied. Apoplastic peroxidase activity was elevated in the needles of pine in a Ni- , Cu- and SO2- polluted environment, which indicated an increased oxidative stress. Increased foliar peroxidase activity due to Ni contamination was shown in the experiment, in which Ni was added as mist. No such response was found in peroxidase acitivity of the roots exposed to elevated Ni and/or Cu in the soil. Elevated Ni in the soil increased the concentration of foliar condensed tannins, which are able to bind heavy metals in the cells. Addition of low levels of Ni in the soil appeared to benefit pine seedlings, which was seen as promoted shoot growth and better condition of the roots. Wet Ni deposition of 2000 mg m-2 reduced growth and survival of pine seedlings, whereas deposition levels 200 mg m-2 or 20 mg m-2 caused no effects in a 2-y lasting experiment. The lichen mat on the forest floor did not act as an effective buffer against the adverse impacts of heavy metals on pine seedlings. However, some evidence was found indicating that soil microbes profited from the lichen mat. Artificial defoliation increased peroxidase activity in the Scots pine needles. In addition, defoliation decreased nitrogen, diamine putrescine and glucose concentrations in the needles and increased the concentrations of several phenolic compounds, starch and sucrose. Previous artificial defoliation led to poor growth of sawfly larvae reared on the pines, suggesting delayed induced resistance in Scots pine. However, there was no consistent relationship between inducibility (proportional increase in a compound following defoliation) and adverse effects on the growth of pine sawfly larvae. The observed inducible responses in needle phenolics due to previous defoliation thus appear to represent non-specific responses against sawflies.

Characterisation of cellulose- and lignin-based materials using x-ray scattering methods

Wood is an important material for the construction and pulping industries. Using x-ray diffraction the microfibril angle of Sitka spruce wood was studied in the first part of this thesis. Sitka spruce (Picea sitchensis [Bong.] Carr.) is native to the west coast of North America, but due to its fast growth rate, it has also been imported to Europe. So far, its nanometre scale properties have not been systematically characterised. In this thesis the microfibril angle of Sitka spruce was shown to depend significantly on the origin of the tree in the first annual rings near the pith. Wood can be further processed to separate lignin from cellulose and hemicelluloses. Solid cellulose can act as a reducer for metal ions and it is also a porous support for nanoparticles. By chemically reducing nickel or copper in the solid cellulose support it is possible to get small nanoparticles on the surfaces of the cellulose fibres. Cellulose supported metal nanoparticles can potentially be used as environmentally friendly catalysts in organic chemistry reactions. In this thesis the size of the nickel and copper containing nanoparticles were studied using anomalous small-angle x-ray scattering and wide-angle x-ray scattering. The anomalous small-angle x-ray scattering experiments showed that the crystallite size of the copper oxide nanoparticles was the same as the size of the nanoparticles, so the nanoparticles were single crystals. The nickel containing nanoparticles were amorphous, but crystallised upon heating. The size of the nanoparticles was observed to be smaller when the reduction of nickel was done in aqueous ammonium hydrate medium compared to reduction made in aqueous solution. Lignin is typically seen as the side-product of wood industries. Lignin is the second most abundant natural polymer on Earth, and it possesses potential to be a useful material for many purposes in addition to being an energy source for the pulp mills. In this thesis, the morphology of several lignins, which were produced by different separation methods from wood, was studied using small-angle and ultra small-angle x-ray scattering. It was shown that the fractal model previously proposed for the lignin structure does not apply to most of the extracted lignin types. The only lignin to which the fractal model could be applied was kraft lignin. In aqueous solutions the average shape of the low molar mass kraft lignin particles was observed to be elongated and flat. The average shape does not necessarily correspond to the shape of the individual particles because of the polydispersity of the fraction and due to selfassociation of the particles. Lignins, and especially lignosulfonate, have many uses as dispersants, binders and emulsion stabilisers. In this thesis work the selfassociation of low molar mass lignosulfonate macromolecules was observed using small-angle x-ray scattering. By taking into account the polydispersity of the studied lignosulfonate fraction, the shape of the lignosulfonate particles was determined to be flat by fitting an oblate ellipsoidal model to the scattering intensity.

Language Influence in Services: Perceived Importance of Native Language Use in Service Encounters

A defining characteristic of most service encounters is that they are strongly influenced by interactions in which both the consumer and the service personnel are playing integral roles. Such is the importance of this interaction that it has even been argued that for the consumer, these encounters are in fact the service. Given this, it is not surprising that interactions involving communication and customer participation in the service encounters have received considerable attention within the field of services marketing. Much of the research on interactions and communication in services, however, appear to have assumed that the consumer and the service personnel by definition are perfectly able to interact and communicate effortlessly with each other. Such communication would require a common language, and in order to be able to take this for granted the market would need to be fairly homogenous. The homogenous country, however, and with it the homogenous market, would appear to be gone. It is estimated that more than half the consumers in the world are already speaking more than one language. For a company entering a new market, language can be a major barrier that firms may underestimate, and understanding language influence across different markets is important for international companies. The service literature has taken a common language between companies and consumers for granted but this is not matched by the realities on the ground in many markets. Owing to the communicational and interaction-oriented nature of services, the lack of a common language between the consumer and the service provider is a situation that could cause problems. A gap exists in the service theory, consisting of a lack of knowledge concerning how language influences consumers in service encounters. By addressing this gap, the thesis contributes to an increased understanding of service theory and provides a better practical understanding for service companies of the importance of native language use for consumers. The thesis consists of four essays. Essay one is conceptual and addresses how sociolinguistic research can be beneficial for understanding consumer language preferences. Essay two empirically shows how the influence of language varies depending on the nature of the service, essay three shows that there is a significant difference in language preferences between female and male consumers while essay four empirically compares consumer language preferences in Canada and Finland, finding strong similarities but also indications of difference in the motives for preferring native language use. The introduction of the thesis outlines the existence of a research gap within the service literature, a gap consisting of the lack of research into how native language use may influence consumers in service encounters. In addition, it is described why this gap is of importance to services and why its importance is growing. Building on this situation, the purpose of the thesis is to establish the existence of language influence in service encounters and to extend the knowledge of how language influences consumers on multilingual markets.