Syntheses and Self-Assembling Characteristics of Amphiphilic Star Diblock Copolymers

Uusien polymeeripohjaisten teknologioiden ja materiaalien myötä räätälöityjen polymeerien tarve on kasvanut. Viime vuosituhannen lopussa kehitetyt kontrolloidut polymerointimenetelmät ovat avanneet uusia mahdollisuuksia paitsi monimutkaisten polymeerien synteesiin, myös itsejärjestyvyyteen perustuvien funktionaalisten nanorakenteiden suunnitteluun ja valmistukseen. Nämä voivat jäljitellä luonnossa esiintyviä rakenteita, joita muodostavat esimerkiksi lipidit ja proteiinit. Itsejärjestyvät molekyylit ovat usein amfifiilisiä eli ne koostuvat hydrofiilisistä ja hydrofobisista osista ja polymeereissä nämä osat voivat olla omina lohkoinaan, jolloin puhutaan amfifiilisistä lohko- tai blokkikopolymeereistä. Riippuen järjestyneiden rakenteiden koostumuksesta ja muodosta, amfifiilisiä blokkikopolymeerejä on tutkittu tai jo käytetty nanoteknologiassa, elastomeereissä, voiteluaineissa, pinta-aktiivisina aineina, lääkkeenannostelussa, maaleissa, sekä elektroniikka-, kosmetiikka- ja elintarviketeollisuudessa. Tavallisimmin käytetyt amfifiiliset blokkikopolymeerit ovat olleet lineaarisia, mutta viime aikoina tutkimus on suuntautunut kohti monimutkaisempia rakenteita. Tällaisia ovat esimerkiksi tähtipolymeerit. Tähtimäisissä polymeereissä miselleille tyypillinen ydin-kuori-rakenne säilyy hyvin alhaisissakin polymeerikonsentraatioissa, koska polymeeriketjut ovat kiinni toisissaan yhdessä pisteessä. Siten ne ovat erityisen kiinnostavia tutkimuskohteita erilaisten hydrofobisten orgaanisten yhdisteiden sitomiseksi ja vapauttamiseksi. Tässä työssä on tarkasteltu amfifiilisten tähtipolymeerien itsejärjestymistä vesiliuoksissa sekä kokeellisesti ja tietokonesimulaatioin. Työ koostuu kahdesta osasta: tähtipolymeerien synteesistä makrosyklisillä initiaattoreilla ja amfifiilisten tähtimäisten blokkikopolymeerien ominaisuuksien tutkimisesta.

Supervisors' emerging role in second-generation knowledge management

This study examines supervisors' emerging new role in a technical customer service and home customers division of a large Finnish telecommunications corporation. Data of the study comes from a second-generation knowledge management project, an intervention research, which was conducted for supervisors of the division. The study exemplifies how supervision work is transforming in high technology organization characterized with high speed of change in technologies, products, and in grass root work practices. The intervention research was conducted in the division during spring 2000. Primary analyzed data consists of six two-hour videorecorded intervention sessions. Unit of analysis has been collective learningactions. Researcher has first written conversation transcripts out of the video-recorded meetings and then analyzed this qualitative data using analytical schema based on collective learning actions. Supervisors' role is conceptualized as an actor of a collective and dynamic activity system, based on the ideas from cultural historical activity theory. On knowledge management researcher has takena second-generation knowledge management viewpoint, following ideas fromcultural historical activity theory and developmental work research. Second-generation knowledge management considers knowledge embedded and constructed in collective practices, such as innovation networks or communities of practice (supervisors' work community), which have the capacity to create new knowledge. Analysis and illustration of supervisors' emerging new role is conceptualized in this framework using methodological ideas derived from activity theory and developmental work research. Major findings of the study show that supervisors' emerging new role in a high technology telecommunication organization characterized with high speed of discontinuous change in technologies, products, and in grass-root practices cannot be defined or characterized using a normative management role/model. Their role is expanding two-dimensionally, (1) socially and (2) in new knowledge, and work practices. The expansion in organization and inter-organizational network (social expansion) causes pressures to manage a network of co-operation partners and subordinates. On the other hand, the faster speed of change in technological solutions, new products, and novel customer wants (expansion in knowledge) causes pressures for supervisors to innovate quickly new work practices to manage this change. Keywords: Activity theory, knowledge management, developmental work research, supervisors, high technology organizations, telecommunication organizations, second-generation knowledge management, competence laboratory, intervention research, learning actions.

Assessing organizational culture in complex sociotechnical systems : Methodological evidence from studies in nuclear power plant maintenance organizations

Failures in industrial organizations dealing with hazardous technologies can have widespread consequences for the safety of the workers and the general population. Psychology can have a major role in contributing to the safe and reliable operation of these technologies. Most current models of safety management in complex sociotechnical systems such as nuclear power plant maintenance are either non-contextual or based on an overly-rational image of an organization. Thus, they fail to grasp either the actual requirements of the work or the socially-constructed nature of the work in question. The general aim of the present study is to develop and test a methodology for contextual assessment of organizational culture in complex sociotechnical systems. This is done by demonstrating the findings that the application of the emerging methodology produces in the domain of maintenance of a nuclear power plant (NPP). The concepts of organizational culture and organizational core task (OCT) are operationalized and tested in the case studies. We argue that when the complexity of the work, technology and social environment is increased, the significance of the most implicit features of organizational culture as a means of coordinating the work and achieving safety and effectiveness of the activities also increases. For this reason a cultural perspective could provide additional insight into the problem of safety management. The present study aims to determine; (1) the elements of the organizational culture in complex sociotechnical systems; (2) the demands the maintenance task sets for the organizational culture; (3) how the current organizational culture at the case organizations supports the perception and fulfilment of the demands of the maintenance work; (4) the similarities and differences between the maintenance cultures at the case organizations, and (5) the necessary assessment of the organizational culture in complex sociotechnical systems. Three in-depth case studies were carried out at the maintenance units of three Nordic NPPs. The case studies employed an iterative and multimethod research strategy. The following methods were used: interviews, CULTURE-survey, seminars, document analysis and group work. Both cultural analysis and task modelling were carried out. The results indicate that organizational culture in complex sociotechnical systems can be characterised according to three qualitatively different elements: structure, internal integration and conceptions. All three of these elements of culture as well as their interrelations have to be considered in organizational assessments or important aspects of the organizational dynamics will be overlooked. On the basis of OCT modelling, the maintenance core task was defined as balancing between three critical demands: anticipating the condition of the plant and conducting preventive maintenance accordingly, reacting to unexpected technical faults and monitoring and reflecting on the effects of maintenance actions and the condition of the plant. The results indicate that safety was highly valued at all three plants, and in that sense they all had strong safety cultures. In other respects the cultural features were quite different, and thus the culturally-accepted means of maintaining high safety also differed. The handicraft nature of maintenance work was emphasised as a source of identity at the NPPs. Overall, the importance of safety was taken for granted, but the cultural norms concerning the appropriate means to guarantee it were little reflected. A sense of control, personal responsibility and organizational changes emerged as challenging issues at all the plants. The study shows that in complex sociotechnical systems it is both necessary and possible to analyse the safety and effectiveness of the organizational culture. Safety in complex sociotechnical systems cannot be understood or managed without understanding the demands of the organizational core task and managing the dynamics between the three elements of the organizational culture.

Becoming a teacher: emerging teacher identity in mathematics teacher education

This research examines three aspects of becoming a teacher, teacher identity formation in mathematics teacher education: the cognitive and affective aspect, the image of an ideal teacher directing the developmental process, and as an on-going process. The formation of emerging teacher identity was approached in a social psychological framework, in which individual development takes place in social interaction with the context through various experiences. Formation of teacher identity is seen as a dynamic, on-going developmental process, in which an individual intentionally aspires after the ideal image of being a teacher by developing his/her own competence as a teacher. The starting-point was that it is possible to examine formation of teacher identity through conceptualisation of observations that the individual and others have about teacher identity in different situations. The research uses the qualitative case study approach to formation of emerging teacher identity, the individual developmental process and the socially constructed image of an ideal mathematics teacher. Two student cases, John and Mary, and the collective case of teacher educators representing socially shared views of becoming and being a mathematics teacher are presented. The development of each student was examined based on three semi-structured interviews supplemented with written products. The data-gathering took place during the 2005 2006 academic year. The collective case about the ideal image provided during the programme was composed of separate case displays of each teacher educator, which were mainly based on semi-structured interviews in spring term 2006. The intentions and aims set for students were of special interest in the interviews with teacher educators. The interview data was analysed following the modified idea of analytic induction. The formation of teacher identity is elaborated through three themes emerging from theoretical considerations and the cases. First, the profile of one s present state as a teacher may be scrutinised through separate affective and cognitive aspects associated with the teaching profession. The differences between individuals arise through dif-ferent emphasis on these aspects. Similarly, the socially constructed image of an ideal teacher may be profiled through a combination of aspects associated with the teaching profession. Second, the ideal image directing the individual developmental process is the level at which individual and social processes meet. Third, formation of teacher identity is about becoming a teacher both in the eyes of the individual self as well as of others in the context. It is a challenge in academic mathematics teacher education to support the various cognitive and affective aspects associated with being a teacher in a way that being a professional and further development could have a coherent starting-point that an individual can internalise.

The Emerging Phenotype: Ecological Genetics of Color, Form and Sex in the Common Frog

One of the main aims of evolutionary biology is to explain why organisms vary phenotypically as they do. Proximately, this variation arises from genetic differences and from environmental influences, the latter of which is referred to as phenotypic plasticity. Phenotypic plasticity is thus a central concept in evolutionary biology, and understanding its relative importance in causing the phenotypic variation and differentiation is important, for instance in anticipating the consequences of human induced environmental changes. The aim of this thesis was to study geographic variation and local adaptation, as well as sex ratios and environmental sex reversal, in the common frog (Rana temporaria). These themes cover three different aspects of phenotypic plasticity, which emerges as the central concept for the thesis. The first two chapters address geographic variation and local adaptation in two potentially thermally adaptive traits, namely the degree of melanism and the relative leg length. The results show that although there is an increasing latitudinal trend in the degree of melanism in wild populations across Scandinavian Peninsula, this cline has no direct genetic basis and is thus environmentally induced. The second chapter demonstrates that although there is no linear, latitudinally ordered phenotypic trend in relative leg length that would be expected under Allen s rule an ecogeographical rule linking extremity length to climatic conditions there seems to be such a trend at the genetic level, hidden under environmental effects. The first two chapters thus view phenotypic plasticity through its ecological role and evolution, and demonstrate that it can both give rise to phenotypic variation and hide evolutionary patterns in studies that focus solely on phenotypes. The last three chapters relate to phenotypic plasticity through its ecological and evolutionary role in sex determination, and consequent effects on population sex ratio, genetic recombination and the evolution of sex chromosomes. The results show that while sex ratios are strongly female biased and there is evidence of environmental sex reversals, these reversals are unlikely to have caused the sex ratio skew, at least directly. The results demonstrate that environmental sex reversal can have an effect on the evolution of sex chromosomes, as the recombination patterns between them seem to be controlled by phenotypic, rather than genetic, sex. This potentially allows Y chromosomes to recombine, lending support for the recent hypothesis suggesting that sex-reversal may play an important role on the rejuvenation of Y chromosomes.

Randomised Evaluation of New Technologies within the Population‐Based Cervical Cancer Screening Programme in Finland: Cross‐Sectional Performance and Validity

A randomised and population-based screening design with new technologies has been applied to the organised cervical cancer screening programme in Finland. In this experiment the women invited to routine five-yearly screening are individually randomised to be screened with automation-assisted cytology, human papillomavirus (HPV) test or conventional cytology. By using the randomised design, the ultimate aim is to assess and compare the long-term outcomes of the different screening regimens. The primary aim of the current study was to evaluate, based on the material collected during the implementation phase of the Finnish randomised screening experiment, the cross-sectional performance and validity of automation-assisted cytology (Papnet system) and primary HPV DNA testing (Hybrid Capture II assay for 13 oncogenic HPV types) within service screening, in comparison to conventional cytology. The parameters of interest were test positivity rate, histological detection rate, relative sensitivity, relative specificity and positive predictive value. Also, the effect of variation in performance by screening laboratory on age-adjusted cervical cancer incidence was assessed. Based on the cross-sectional results, almost no differences were observed in the performance of conventional and automation-assisted screening. Instead, primary HPV screening found 58% (95% confidence interval 19-109%) more cervical lesions than conventional screening. However, this was mainly due to overrepresentation of mild- and moderate-grade lesions and, thus, is likely to result in overtreatment since a great deal of these lesions would never progress to invasive cancer. Primary screening with an HPV DNA test alone caused substantial loss in specificity in comparison to cytological screening. With the use of cytology triage test, the specificity of HPV screening improved close to the level of conventional cytology. The specificity of primary HPV screening was also increased by increasing the test positivity cutoff from the level recommended for clinical use, but the increase was more modest than the one gained with the use of cytology triage. The performance of the cervical cancer screening programme varied widely between the screening laboratories, but the variation in overall programme effectiveness between respective populations was more marginal from the very beginning of the organised screening activity. Thus, conclusive interpretations on the quality or success of screening should not be based on performance parameters only. In the evaluation of cervical cancer screening the outcome should be selected as closely as possible to the true measure of programme effectiveness, which is the number of invasive cervical cancers and subsequent deaths prevented in the target population. The evaluation of benefits and adverse effects of each new suggested screening technology should be performed before the technology becomes an accepted routine in the existing screening programme. At best, the evaluation is performed randomised, within the population and screening programme in question, which makes the results directly applicable to routine use.

Two ex situ fungal technologies to treat contaminated soil

Wood-degrading fungi are able to degrade a large range of recalcitrant pollutants which resemble the lignin biopolymer. This ability is attributed to the production of lignin-modifying enzymes, which are extracellular and non-specific. Despite the potential of fungi in bioremediation, there is still an understanding gap in terms of the technology. In this thesis, the feasibility of two ex situ fungal bioremediation methods to treat contaminated soil was evaluated. Treatment of polycyclic aromatic hydrocarbons (PAHs)-contaminated marsh soil was studied in a stirred slurry-phase reactor. Due to the salt content in marsh soil, fungi were screened for their halotolerance, and the white-rot fungi Lentinus tigrinus, Irpex lacteus and Bjerkandera adusta were selected for further studies. These fungi degraded 40 - 60% of a PAH mixture (phenanthrene, fluoranthene, pyrene and chrysene) in a slurry-phase reactor (100 ml) during 30 days of incubation. Thereafter, B. adusta was selected to scale-up and optimize the process in a 5 L reactor. Maximum degradation of dibenzothiophene (93%), fluoranthene (82%), pyrene (81%) and chrysene (83%) was achieved with the free mycelium inoculum of the highest initial biomass (2.2 g/l). In autoclaved soil, MnP was the most important enzyme involved in PAH degradation. In non-sterile soil, endogenous soil microbes together with B. adusta also degraded the PAHs extensively, suggesting a synergic action between soil microbes and the fungus. A fungal solid-phase cultivation method to pretreat contaminated sawmill soil with high organic matter content was developed to enhance the effectiveness of the subsequent soil combustion. In a preliminary screening of 146 fungal strains, 28 out of 52 fungi, which extensively colonized non-sterile contaminated soil, were litter-decomposing fungi. The 18 strains further selected were characterized by their production of lignin-modifying and hydrolytic enzymes, of which MnP and endo-1,4-β-glucanase were the main enzymes during cultivation on Scots pine (Pinus sylvestris) bark. Of the six fungi selected for further tests, Gymnopilus luteofolius, Phanerochaete velutina, and Stropharia rugosoannulata were the most active soil organic matter degraders. The results showed that a six-month pretreatment of sawmill soil would result in a 3.5 - 9.5% loss of organic matter, depending on the fungus applied. The pretreatment process was scaled-up for a 0.56 m3 reactor, in which perforated plastic tubes filled with S. rugosoannulata growing on pine bark were introduced into the soil. The fungal pretreatment resulted in a soil mass loss of 30.5 kg, which represents 10% of the original soil mass (308 kg). Despite the fact that Scots pine bark contains several antimicrobial compounds, it was a suitable substrate for fungal growth and promoter of the production of oxidative enzymes, as well as an excellent and cheap natural carrier of fungal mycelium. This thesis successfully developed two novel fungal ex situ bioremediation technologies and introduce new insights for their further full-scale application. Ex situ slurry-phase fungal reactors might be applied in cases when the soil has a high water content or when the contaminant bioavailability is low; for example, in wastewater treatment plants to remove pharmaceutical residues. Fungal solid-phase bioremediation is a promising remediation technology to ex situ or in situ treat contaminated soil.

Consumption in Rural Bangladesh : Households, Lifestyles, and Identities

Bangladesh, often better known to the outside world as a country of natural calamities, is one of the most densely populated countries in the world. Despite rapid urbanization, more than 75% of the people still live in rural areas. The density of the rural population is also one of the highest in the world. Being a poor and low-income country, its main challenge is to eradicate poverty through increasing equitable income. Since its independence in 1971, Bangladesh has experienced many ups and downs, but over the past three decades, its gross domestic product (GDP) has grown at an impressive rate. Consequently, the country s economy is developing and the country has outperformed many low-income countries in terms of several social indicators. Bangladesh has achieved the Millennium Development Goal (MDG) of eliminating gender disparity in primary and secondary school enrollment. A sharp decline in child and infant mortality rates, increased per capita income, and improved food security have placed Bangladesh on the track to achieving in the near future the status of a middle-income country. All these developments have influenced the consumption pattern of the country. This study explores the consumption scenario of rural Bangladesh, its changing consumption patterns, the relationship between technology and consumption in rural Bangladesh, cultural consumption in rural Bangladesh, and the myriad reasons why consumers nevertheless feel compelled to consume chemically treated foods. Data were collected in two phases in the summers of 2006 and 2008. In 2006, the empirical data were collected from the following three sources: interviews with consumers, producers/sellers, and doctors and pharmacists; observations of sellers/producers; and reviews of articles published in the national English and Bengali (the national language of Bangladesh) daily newspapers. A total of 110 consumers, 25 sellers/producers, 7 doctors, and 7 pharmacists were interviewed and observed. In 2008, data were collected through semi-structured in-depth qualitative interviews, ethnography, and unstructured conversations substantiated by secondary sources and photographs; the total number of persons interviewed was 22. -- Data were also collected on the consumption of food, clothing, housing, education, medical facilities, marriage and dowry, the division of labor, household decision making, different festivals such as Eid (for Muslims), the Bengali New Year, and Durga puja (for Hindus), and leisure. Qualitative methods were applied to the data analysis and were supported by secondary quantitative data. The findings of this study suggest that the consumption patterns of rural Bangladeshis are changing over time along with economic and social development, and that technology has rendered aspects of daily life more convenient. This study identified the perceptions and experiences of rural people regarding technologies in use and explored how culture is associated with consumption. This study identified the reasons behind the use of hazardous chemicals (e.g. calcium carbide, sodium cyclamate, cyanide and formalin, etc.) in foods as well as the extent to which food producers/sellers used such chemicals. In addition, this study assessed consumer perceptions of and attitudes toward these contaminated food items and explored how adulterated foods and food stuffs affect consumer health. This study also showed that consumers were aware that various foods and food stuffs contained hazardous chemicals, and that these adulterated foods and food stuffs were harmful to their health.

Adoption processes for EDM, EDI and BIM technologies in the construction industry

Three strategically important uses of IT in the construction industry are the storage and management of project documents on webservers (EDM), the electronic handling of orders and invoices between companies (EDI) and the use of 3-D models including non-geometrical attributes for integrated design and construction (BIM). In a broad longitudinal survey study of IT use in the Swedish Construction Industry the extent of use of these techniques was measured in 1998, 2000 and 2007. The results showed that EDM and EDI are currently already well-established techniques whereas BIM, although it promises the biggest potential benefits to the industry, only seems to be at the beginning of adoption. In a follow-up to the quantitative studies, the factors affecting the decisions to implement EDM, EDI and BIM as well as the actual adoption processes, were studied using semi-structured interviews with practitioners. The theoretical basis for the interview studies was informed by theoretical frameworks from IT-adoption theory, where in particular the UTAUT model has provided the main basis for the analyses presented here. The results showed that the decisions to take the above technologies into use are made on three differ- ent levels: the individual level, the organizational level in the form of a company, and the organiza- tional level in the form of a project. The different patterns in adoption can to some part be explained by where the decisions are mainly taken. EDM is driven from the organisation/project level, EDI mainly from the organisation/company level, and BIM is driven by individuals pioneering the technique.

From Creative Ideas to New Emerging Ventures: Entrepreneurial Processes among Finnish Design Entrepreneurs

This study focuses on self-employed industrial designers and how they emerge new venture ideas. More specifically, this study strives to determine what design entrepreneurs do when they create new venture ideas, how venture ideas are nurtured into being, and how the processes are organized to bring such ideas to the market in the given industrial context. In contemporary times when the concern for the creative class is peaking, the research and business communities need more insight of the kind that this study provides, namely how professionals may contribute to their entrepreneurial processes and other agents’ business processes. On the one hand, the interviews underlying this study suggest that design entrepreneurs may act as reactive service providers who are appointed by producers or marketing parties to generate product-related ideas on their behalf. On the other hand, the interviews suggest that proactive behaviour that aims on generating own venture ideas, may force design entrepreneurs to take considerable responsibility in organizing their entrepreneurial processes. Another option is that they strive to bring venture ideas to the market in collaboration, or by passing these to other agents’ product development processes. Design entrepreneurs’ venture ideas typically emerge from design related starting points and observations. Product developers are mainly engaged with creating their own ideas, whereas service providers refer mainly to the development of other agents’ venture ideas. In contrast with design entrepreneurs, external actors commonly emphasize customer demand as their primary source for new venture ideas, as well as development of these in close interaction with available means of production and marketing. Consequently, design entrepreneurs need to address market demand since without sales their venture ideas may as well be classified as art. In case, they want to experiment with creative ideas, then there should be another source of income to support this typically uncertain and extensive process. Currently, it appears like a lot of good venture ideas and resources are being wasted, when venture ideas do not suite available production or business procedures. Sufficient communication between design entrepreneurs and other agents would assist all parties in developing production efficient and distributable venture ideas. Overall, the findings suggest that design entrepreneurs are often involved simultaneously in several processes that aim at emerging new product related ventures. Consequently, design entrepreneurship is conceptualized in this study as a dual process. This implies that design entrepreneurs can simultaneously be in charge of their entrepreneurial processes, as they operate as resources in other agents’ business processes. The interconnection between activities and agents suggests that these kinds of processes tend to be both complex and multifaceted to their nature.

The Organisation of Policy Meets the Commercialisation of Sex - Global Linkages, Policies, Technologies

During recent years the commercialisation of sex has increased and intensified both locally and globally. This thesis explores the commercialisation of bodies, sex and sexualities, particularly the sex trade, and the impact of rapidly evolving information and communication technologies on this globalising trade. The main focus of this work is on the policies, discourses and policy developments in the area especially in the Finnish context. The study is based on multidisciplinary theoretical sources through which the framework of multiple linkages relevant to the commercialisation of sex is conceptualised. The sex trade functions through a web of intersecting linkages of a substantive, economic, organisational, temporal, spatial, cultural, technological, as well as of legislative and policy nature. This framework of linkages forms the basis for the analysis of the main empirical data, namely qualitative interviews with thirty key managers and professionals, who are responsible for the preparation and implementation of policies on commercial sex. In addition, the thesis addresses the policies and policy practices on the sex trade through the analysis of national and international policy instruments. In addition to analysing the processes of the commercialisation of sex and its effects, the study also discusses their further implications for organisational policy-making, research, and society more generally. The thesis thus seeks to contribute to practice, research and theory on gender, management and organisations.

On the Importance of Mutual Fund Families in Emerging Markets

This study contributes to the mutual fund literature by looking at performance persistence on a fund family level, allowing for individual equity, bond and balanced funds to be included under single family umbrellas. The study is conducted on the emerging Finnish mutual fund market, an environment in which the importance of superior fund family teams is likely to be accentuated. Using both non–parametric and parametric tests we find robust evidence of performance persistence for the fund families. Persistence is particularly strong in the first half of the investigation period, which highlights the importance of fund families at early stages of market development.

Cross-Border Competence Management in Emerging Markets: Voices from China and Russia

This book is on cross-border competence management in Russia and China. Corporations are facing a number of problems and challenges in their international operations, to which there typically are no simple solutions. For instance, they need to understand and respond to cultural and institutional diversity and ascertain that their foreign units are integrated with the rest of the corporation. Throughout this report we will discuss a range of challenges confronting firms as they seek to develop their capabilities to operate internationally. Some of the challenges are clearly case specific, and although this book aims to offer research-based advice to practicing managers there is a potential danger in applying lessons from other companies to the own firm. Our hope is that our analyses of the challenges facing Finnish corporations in China and Russia reported together with extensive quotes from our interviews and insights from other recent studies will help readers draw their own conclusions as to how to deal with issues related to competence management across borders. With this book we also aspire to contribute to the academic literature by providing new insights into cross-border competence management in general and the operations of Finnish corporations in Russia and China in particular.