Konstrukcija mnimosti : K poètike "Voskovoj persony" Ju. Tynjanova

The subject of this work is the poetics of «The Wax Effigy», a short novel or novella by Jurii Tynianov, Russian writer, literary critic, historian of literature and prominent literary theoretician. The plot structure of the novel is based upon a real event, the creation by Bartolomeo Carlo Rastrelli in 1725 of a wax sculpture of the first Russian emperor, Peter the Great. «Construction of the Sham» consists of three chapters, an introduction and a conclusion. Due to the fact that Tynianov was at the same time a prose writer and theoretician of literature it seemed important to consider the reception of his prose and his works on literary theory in relationship to each other. The introduction is devoted to this task. The first chapter is about the history of the creation of the novel and its reception. Tynianov stopped writing one short story in order to write the novel; these two works have some common traits. It seems almost obvious that his work on the first text was a real step toward the creation of the second. In the first story there is an opposition of dead/alive which is semantic prefiguring of a central motif in «The Wax Effigy». An analysis of the reception of the novel demonstrated that almost every critic writing about the novel has described it as nonsense. Critics considered Tynianov's work in terms of «devices» and «content» and could not understand how devices are related to the content of the novel: the novel was thought as a signifier without any signified. Implicitly, critics thought the signified of the novel as a traditional one of the historical novel, as the historiosophical «idea», embodied in the system of literary devices. In this case literature becomes something instrumental, a kind of expression of extraliterary content. In contradistinction to that Tynianov considered literary semantics as an effect of the literary structure. From his point of view the literary sense is immanent to the process of signification accomplished inside the literary text. The second chapter is devoted to a rhetorical analysis of the opposition dead/alive. Tynianov systematically compares both terms of the opposition. As a result of this strategy the wax effigy of the dead emperor becomes «as if» alive and the world of living people «as if» dead. The qualifier «as if» refers to the fact that Tynianov creates an ambiguous semantic system. This rhetoric is related to European Romanticism and his «fantastic literature» (Merimé, Hoffmann, Maupassant etc.). But Tynianov demonstrates a linguistic origin of the strange fantoms created by romantics; he demystifies these idols by parodying the fantastic literature, that is, showing «how it was done». At the same time, the opposition mentioned above refers to his idea of «incongruity» which plays a prominent role in Tynianov s theory but has never been conceptualised. The incongruity is a inner collision of the literary text; from Tynianov's point of view the meaning of the work of literature is always a dynamic collision of semantically heterogeneous elements struggling with each other. In «The Wax Effigy» Tynianov creates a metalevel of the work demonstrating the process of creation of the literary sense. The third chapter is a reconstruction of Tynianov's conception of the historical prose, specifically of the mechanisms by which historical facts are transformed into literary events. Tynianov thought that the task of the historical novelist is to depict his hero as an actor, to demonstrate that as a wearer of many masks he is a creator of appearances, ambiguities. Here, in the «figure of fiction» (Andrei Belyi), the very idea of the historical prose and rhetoric employed in «The Wax Effigy», history and literature meet each other. In his last theoretical work, «On parody» Tynianov writes about the so-called sham structure of parody. In his opinion every parody is a text about other texts and «serious» work which could be read at the same time as a text about «reality». This twofold structure of parody is that of «The Wax Effigy»: that text speaks about ambiguities of the history and about ambiguities of the literary sense, about social reality of the past and - about the working of the literature itself. «The Wax Effigy» is written as a autoreflective text, as an experiment in literary semantics, as a system of literary ambiguities - of hero, rhetoric and the text itself. The meaning of the novel is created not by the embodiment extraliterary idea, but by the process of signification accomplished inside the work of literature. In this sense Tynianov's novel is parody, a break with the tradition of the historical novel preceding «The Wax Effigy».

"Secoituxesta järjettömäin luondocappalden canssa" : Perversiot, oikeuselämä ja kansankulttuuri 1700-luvun Suomessa

Bestiality was in the 18th century a more difficult problem in terms of criminal policy in Sweden and Finland than in any other Christian country in any other period. In the legal history of deviant sexuality, the phenomenon was uniquely widespread by international comparison. The number of court cases per capita in Finland was even higher than in Sweden. The authorities classified bestiality among the most serious crimes and a deadly sin. The Court of Appeal in Turku opted for an independent line and was clearly more lenient than Swedish courts of justice. Death sentences on grounds of bestiality ended in the 1730s, decades earlier than in Sweden. The sources for the present dissertation include judgment books and Court of Appeal decisions in 253 cases, which show that the persecution of those engaging in bestial acts in 18th century Finland was not organised by the centralised power of Stockholm. There is little evidence of local campaigns that would have been led by authorities. The church in its orthodoxy was losing ground and the clergy governed their parishes with more pragmatism than the Old Testament sanctioned. When exposing bestiality, the legal system was compelled to rely on the initiative of the public. In cases of illicit intercourse or adultery the authorities were even more dependent on the activeness of the local community. Bestiality left no tangible evidence, illegitimate children, to betray the crime to the clergy or secular authorities. The moral views of the church and the local community were not on a collision course. It was a common view that bestiality was a heinous act. Yet nowhere near all crimes came to the authorities' knowledge. Because of the heavy burden of proof, the legal position of the informer was difficult. Passiveness in reporting the crime was partly because most Finns felt it was not their place to intervene in their neighbours' private lives, as long as that privacy posed no serious threat to the neighbourhood. Hidden crime was at least as common as crime more easily exposed and proven. A typical Finnish perpetrator of bestiality was a young unmarried man with no criminal background or mental illness. The suspects were not members of ethnic minorities or marginal social groups. In trials, farmhands were more likely to be sentenced than their masters, but a more salient common denominator than social and economical status was the suspects' young age. For most of the defendants bestiality was a deep-rooted habit, which had been adopted in early youth. This form of subculture spread among the youth, and the most susceptible to experiment with the act were shepherds. The difference between man and animal was not clear-cut or self-evident. The difficulty in drawing the line is evident both in legal sources and Finnish folklore. The law that required that the animal partners be slaughtered led to the killing of thousands of cows and mares, and thereby to substantial material losses to their owners. Regarding bestiality as a crime against property motivated people to report it. The belief that the act would produce human-animal mongrels or that it would poison the milk and the meat horrified the public more than the teachings of the church ever could. Among the most significant aspects in the problems regarding the animals is how profoundly different the worldview of 18th century people was from that of today.

Idyll eller verklighet? : Albert Edelfelt och Gunnar Berndtson i det moderna genombrottets ambivalens

Idyll or Reality? Albert Edelfelt, Gunnar Berndtson and the ambivalent breakthrough of modernity Albert Edelfelt (1854-1905) and Gunnar Berndtson (1854-1895) have much in common. In this dissertation, I study their paintings of local peasants and fishermen and of the gentry’s summer in the county of Uusimaa in southern Finland, in the context of Nordic history of ideas. The breakthrough of modernity, with its attention on debating social problems, provides a novel angle into the oeuvres of the two artists. My focus is on the paintings which emerge in the collision of the public discussion of social matters and the values of the artists’ manorial milieu. The artists’ relation to the public discussion is scrutinized through two of the main topics: the question of the common people and democracy, and the question of equality between men and women. My dissertation is a contextual study which is based on the analysis of the artworks of Edelfelt and Berndtson, on their letters, and on the study of drama and fiction of their time. The notion “liberté, egalité, fraternité” is linked to the breakthrough of modernity. Both artists were aware of the ideal of equality. They used the means and the themes of contemporary art in their presentations, but their pictures contain the ideal of an earlier epoch: the hardworking, but still complacent common people. This conception of the common people is also reflected in the poems of J. L. Runeberg. Women of the late 19th century challenged woman’s primary role as wife and mother. In Edelfelt’s and Berndtson’s depictions of the gentry enjoying summer, women and children have the main role. Notwithstanding the debate of the breakthrough of modernity they depicted women almost without exception as good mothers. Their paintings often depict lazy days in the sunshine, which were, in reality, rare moments for the mistress of the house. Edelfelt’s and Berndtson’s subjects from the Uusimaa countryside coincide with the topics of the breakthrough of modernity, but both the pictures of the common people and the depictions of the gentry enjoying summer, are a retouched picture of reality, often an idyll, in which the public discussion of social matters is evident only materially or not at all.

Learning challenges of NGOs in development : Co-operation of Finnish NGOs in Morogoro, Tanzania

Non-governmental organisations (NGOs) have gained an important role in development co-operation during the last two decades. The development funding channelled through NGOs has increased and the number of NGOs engaged in development activities, both North and South, has been growing. Supporting NGOs has been seen as one way to strengthen civil society in the South and to provide potential for enhancing more effective development than the state, and to exercise participatory development and partnership in their North-South relationships. This study focuses on learning in the co-operation practices of small Finnish NGOs in Morogoro, Tanzania. Drawing on the cultural-historical activity theory and the theory of expansive learning, in this study I understand learning as a qualitative change in the actual co-operation practices. The qualitative change, for its part, emerges out of attempts to deal with the contradictions in the present activity. I use the concept of developmental contradiction in exploring the co-operation of the small Finnish NGOs with their Tanzanian counterparts. Developmental contradiction connects learning to actual practice and its historical development. By history, in this study I refer to multiple developmental trajectories, such as trajectories of individual participants, organisations, co-operation practices and the institutional system in which the NGO-development co-operation is embedded. In the empirical chapters I explore the co-operation both in the development co-operation projects and in micro-level interaction between partners taking place within the projects. I analyse the perceptions of the Finnish participants about the different developmental trajectories, the tensions, inclusions and exclusions in the evolving object of co-operation in one project, the construction of power relations in project meetings in three projects, and the collision of explicated partnership with the emerging practice of trusteeship in one project. On the basis of the empirical analyses I elaborate four developmental contradictions and learning challenges for the co-operation. The developmental contradictions include: 1) implementing a ready-made Finnish project idea vs. taking the current activities of Tanzanian NGO as a starting point; 2) gaining experiences and cultural interaction vs. access to outside funding; 3) promoting the official tools of development co-operation in training vs. use of tools and procedures taken from the prior activities of both partners in actual practice; and 4) asymmetric relations between the partners vs. rhetoric of equal partnership. Consequently, on the basis of developmental contradictions four learning challenges are suggested: a shift from legitimation of Finnish ideas to negotiation, transcending the separate objects and finding a partly joint object, developing locally shared tools for the co-operation, and identification and reflection of the power relations in the practice of co-operation. Keywords: activity theory; expansive learning; NGO development co-operation; partnership; power

Yhteisöllisyys voimavarana yliopisto-opetuksen ja -opiskelun kehittämisessä

A sense of community as a resource for developing university teaching and learning The aim of this doctoral research was to determine how a sense of community can be a resource for developing university teaching and learning. The theoretical background is linked to social sciences, social psychology, university pedagogy and educational sciences. The thesis is comprised of two separate studies. Study I consisted of an action research project in which a model of cooperatively developing a teaching and learning culture was created and tested. The focus of study I was the university pedagogy programme of the Faculty of Agriculture and Forestry. The results demonstrated that the theoretical framework and the methods of cooperative learning provide useful tools for developing an academic learning and teaching culture. The approach helps to create a benevolent learning atmosphere. The cooperative learning culture used in the action research project reflected the traditional academic learning culture and also caused a collision between the two cultures. The aim of study II was to determine how Open University students and Bachelor’s degree students experience their teaching-learning environment and the importance of the learning community and peer support to their studies. The results indicated that, with the exception of support from other students, the Open University students experienced their teaching-learning environments on average more positively than the Bachelor’s degree students. According to the Open University students, their own motivation and interest was the most important factor that enhanced studying. Furthermore, the most common factors delaying their studies were their life situation and a lack of time. The sense of community and social relations mainly promoted studying. Open University students experienced that they were supported by their teachers, tutors, other students, the working community, family and hobbies. The research demonstrated that the methods that make good use of communal resources are negotiation of shared goals and rules, working in various small groups, emphasis on shared and individual responsibilities and assessment of the product and the process of learning. The resources of the academic community can be developed if the members of the community develop, in addition to the communal working methods, their communal sensitivity. In other words, they should have an understanding of social psychological and sociological concepts that they can use for observing communal phenomena.

Numerical approaches to new particle formation and growth in the atmosphere

Aerosols impact the planet and our daily lives through various effects, perhaps most notably those related to their climatic and health-related consequences. While there are several primary particle sources, secondary new particle formation from precursor vapors is also known to be a frequent, global phenomenon. Nevertheless, the formation mechanism of new particles, as well as the vapors participating in the process, remain a mystery. This thesis consists of studies on new particle formation specifically from the point of view of numerical modeling. A dependence of formation rate of 3 nm particles on the sulphuric acid concentration to the power of 1-2 has been observed. This suggests nucleation mechanism to be of first or second order with respect to the sulphuric acid concentration, in other words the mechanisms based on activation or kinetic collision of clusters. However, model studies have had difficulties in replicating the small exponents observed in nature. The work done in this thesis indicates that the exponents may be lowered by the participation of a co-condensing (and potentially nucleating) low-volatility organic vapor, or by increasing the assumed size of the critical clusters. On the other hand, the presented new and more accurate method for determining the exponent indicates high diurnal variability. Additionally, these studies included several semi-empirical nucleation rate parameterizations as well as a detailed investigation of the analysis used to determine the apparent particle formation rate. Due to their high proportion of the earth's surface area, oceans could potentially prove to be climatically significant sources of secondary particles. In the lack of marine observation data, new particle formation events in a coastal region were parameterized and studied. Since the formation mechanism is believed to be similar, the new parameterization was applied in a marine scenario. The work showed that marine CCN production is feasible in the presence of additional vapors contributing to particle growth. Finally, a new method to estimate concentrations of condensing organics was developed. The algorithm utilizes a Markov chain Monte Carlo method to determine the required combination of vapor concentrations by comparing a measured particle size distribution with one from an aerosol dynamics process model. The evaluation indicated excellent agreement against model data, and initial results with field data appear sound as well.

Interatomic potentials for fusion reactor material simulations

Fusion energy is a clean and safe solution for the intricate question of how to produce non-polluting and sustainable energy for the constantly growing population. The fusion process does not result in any harmful waste or green-house gases, since small amounts of helium is the only bi-product that is produced when using the hydrogen isotopes deuterium and tritium as fuel. Moreover, deuterium is abundant in seawater and tritium can be bred from lithium, a common metal in the Earth's crust, rendering the fuel reservoirs practically bottomless. Due to its enormous mass, the Sun has been able to utilize fusion as its main energy source ever since it was born. But here on Earth, we must find other means to achieve the same. Inertial fusion involving powerful lasers and thermonuclear fusion employing extreme temperatures are examples of successful methods. However, these have yet to produce more energy than they consume. In thermonuclear fusion, the fuel is held inside a tokamak, which is a doughnut-shaped chamber with strong magnets wrapped around it. Once the fuel is heated up, it is controlled with the help of these magnets, since the required temperatures (over 100 million degrees C) will separate the electrons from the nuclei, forming a plasma. Once the fusion reactions occur, excess binding energy is released as energetic neutrons, which are absorbed in water in order to produce steam that runs turbines. Keeping the power losses from the plasma low, thus allowing for a high number of reactions, is a challenge. Another challenge is related to the reactor materials, since the confinement of the plasma particles is not perfect, resulting in particle bombardment of the reactor walls and structures. Material erosion and activation as well as plasma contamination are expected. Adding to this, the high energy neutrons will cause radiation damage in the materials, causing, for instance, swelling and embrittlement. In this thesis, the behaviour of a material situated in a fusion reactor was studied using molecular dynamics simulations. Simulations of processes in the next generation fusion reactor ITER include the reactor materials beryllium, carbon and tungsten as well as the plasma hydrogen isotopes. This means that interaction models, {\it i.e. interatomic potentials}, for this complicated quaternary system are needed. The task of finding such potentials is nonetheless nearly at its end, since models for the beryllium-carbon-hydrogen interactions were constructed in this thesis and as a continuation of that work, a beryllium-tungsten model is under development. These potentials are combinable with the earlier tungsten-carbon-hydrogen ones. The potentials were used to explain the chemical sputtering of beryllium due to deuterium plasma exposure. During experiments, a large fraction of the sputtered beryllium atoms were observed to be released as BeD molecules, and the simulations identified the swift chemical sputtering mechanism, previously not believed to be important in metals, as the underlying mechanism. Radiation damage in the reactor structural materials vanadium, iron and iron chromium, as well as in the wall material tungsten and the mixed alloy tungsten carbide, was also studied in this thesis. Interatomic potentials for vanadium, tungsten and iron were modified to be better suited for simulating collision cascades that are formed during particle irradiation, and the potential features affecting the resulting primary damage were identified. Including the often neglected electronic effects in the simulations was also shown to have an impact on the damage. With proper tuning of the electron-phonon interaction strength, experimentally measured quantities related to ion-beam mixing in iron could be reproduced. The damage in tungsten carbide alloys showed elemental asymmetry, as the major part of the damage consisted of carbon defects. On the other hand, modelling the damage in the iron chromium alloy, essentially representing steel, showed that small additions of chromium do not noticeably affect the primary damage in iron. Since a complete assessment of the response of a material in a future full-scale fusion reactor is not achievable using only experimental techniques, molecular dynamics simulations are of vital help. This thesis has not only provided insight into complicated reactor processes and improved current methods, but also offered tools for further simulations. It is therefore an important step towards making fusion energy more than a future goal.

Multiscale study on hydrogen mobility in metallic fusion divertor material

For achieving efficient fusion energy production, the plasma-facing wall materials of the fusion reactor should ensure long time operation. In the next step fusion device, ITER, the first wall region facing the highest heat and particle load, i.e. the divertor area, will mainly consist of tiles based on tungsten. During the reactor operation, the tungsten material is slowly but inevitably saturated with tritium. Tritium is the relatively short-lived hydrogen isotope used in the fusion reaction. The amount of tritium retained in the wall materials should be minimized and its recycling back to the plasma must be unrestrained, otherwise it cannot be used for fueling the plasma. A very expensive and thus economically not viable solution is to replace the first walls quite often. A better solution is to heat the walls to temperatures where tritium is released. Unfortunately, the exact mechanisms of hydrogen release in tungsten are not known. In this thesis both experimental and computational methods have been used for studying the release and retention of hydrogen in tungsten. The experimental work consists of hydrogen implantations into pure polycrystalline tungsten, the determination of the hydrogen concentrations using ion beam analyses (IBA) and monitoring the out-diffused hydrogen gas with thermodesorption spectrometry (TDS) as the tungsten samples are heated at elevated temperatures. Combining IBA methods with TDS, the retained amount of hydrogen is obtained as well as the temperatures needed for the hydrogen release. With computational methods the hydrogen-defect interactions and implantation-induced irradiation damage can be examined at the atomic level. The method of multiscale modelling combines the results obtained from computational methodologies applicable at different length and time scales. Electron density functional theory calculations were used for determining the energetics of the elementary processes of hydrogen in tungsten, such as diffusivity and trapping to vacancies and surfaces. Results from the energetics of pure tungsten defects were used in the development of an classical bond-order potential for describing the tungsten defects to be used in molecular dynamics simulations. The developed potential was utilized in determination of the defect clustering and annihilation properties. These results were further employed in binary collision and rate theory calculations to determine the evolution of large defect clusters that trap hydrogen in the course of implantation. The computational results for the defect and trapped hydrogen concentrations were successfully compared with the experimental results. With the aforedescribed multiscale analysis the experimental results within this thesis and found in the literature were explained both quantitatively and qualitatively.

Yliopisto-opetuksen yhteistoiminnallinen kehittäminen

The main aim of this work is to study the possibility of applying the cooperative learning approach to develop academic learning and teaching culture. In this work cooperative learning refers to a pedagogical approach that applies social psychological knowledge of group dynamics and small group teaching. Furthermore, theories of collaborative learning and organization development have been applied. Based on these theories a model of developing learning and teaching culture was developed. The model was tested in the development project that was carried out in the Faculty of Agriculture and Forestry of Helsinki University. The research questions were: How were the theories of cooperative and collaborative learning and organization development applied in the project? What kind of effects did the development project have on the learning and teaching culture? Through which kind of mechanisms did the project influence this culture? How should the development model be revised after the empirical test? The project lasted five years and the major part of the project consisted of a one-year pedagogical training course. Altogether 145 people (teachers, researchers, library staff, and students) participated in the training, two to three departments at a time. In the pedagogical training cooperative learning methods were widely used. A questionnaire was used to study effects of the development project. The questionnaire was sent to 87 people and 65.5 % answered it. Both the answers to the questionnaire and a sample of learning diaries (n=61) were used to study the mechanism of the project. A sample of the learning diaries consisted of two pedagogical training group members diaries. The frequency distributions were calculated as extrapolations from the answers to the structured questions. Furthermore the answers were classified by the main background variables. The analysis of the open answers to the questionnaire and the learning diaries were data-based. According to the answers to the questionnaire, the effects of the pedagogical training were as follows: The participants consider learning more as an active process of constructing knowledge. Furthermore they considered the individual learning styles and strategies, cooperation and motivation as more important part of the learning process than before the pedagogical training. The role of the teacher was viewed more challenging than before. Additionally the cooperation between teachers, other staff members and students had projected to increase. After the project had ended the teaching methods in the whole faculty were viewed to become varied and the teaching was considered to be more valued than before. According to the answers to the questionnaire, the project influenced through the following ways: the project stimulated the change process, provided new methods for learning and teaching, had an effect on conceptions of learning and teaching and facilitated meaningful communication with others (staff and students). The analysis of the learning diaries supported these findings. In addition, the analysis of the learning diaries deepened the understanding of how the cooperative learning methods supported positive learning atmosphere and reduced the negative effect of the status differences between the members of the group. The critical comments in the learning diaries could be interpreted as collision between cooperative and traditional teaching culture. Cooperative learning gives theory-based methods to develop academic learning and teaching culture. The approach helps the developer to create positive collaborative learning environment and gives ways to support learning in small groups, which can promote cultural change. On the other hand, to understand the whole process of organization development and promote change the theories of organizations and more sosioconstructivist theory of learning are needed. Cooperative learning, collaborative learning, higher education, group dynamics, social constructionism, organisational culture, organisation development

Mass spectrometry and n-in-one analytics in early drug discovery: Combinatorial chemistry libraries, lipophilicity and absorption screening

This thesis describes current and past n-in-one methods and presents three early experimental studies using mass spectrometry and the triple quadrupole instrument on the application of n-in-one in drug discovery. N-in-one strategy pools and mix samples in drug discovery prior to measurement or analysis. This allows the most promising compounds to be rapidly identified and then analysed. Nowadays properties of drugs are characterised earlier and in parallel with pharmacological efficacy. Studies presented here use in vitro methods as caco-2 cells and immobilized artificial membrane chromatography for drug absorption and lipophilicity measurements. The high sensitivity and selectivity of liquid chromatography mass spectrometry are especially important for new analytical methods using n-in-one. In the first study, the fragmentation patterns of ten nitrophenoxy benzoate compounds, serial homology, were characterised and the presence of the compounds was determined in a combinatorial library. The influence of one or two nitro substituents and the alkyl chain length of methyl to pentyl on collision-induced fragmentation was studied, and interesting structurefragmentation relationships were detected. Two nitro group compounds increased fragmentation compared to one nitro group, whereas less fragmentation was noted in molecules with a longer alkyl chain. The most abundant product ions were nitrophenoxy ions, which were also tested in the precursor ion screening of the combinatorial library. In the second study, the immobilized artificial membrane chromatographic method was transferred from ultraviolet detection to mass spectrometric analysis and a new method was developed. Mass spectra were scanned and the chromatographic retention of compounds was analysed using extract ion chromatograms. When changing detectors and buffers and including n-in-one in the method, the results showed good correlation. Finally, the results demonstrated that mass spectrometric detection with gradient elution can provide a rapid and convenient n-in-one method for ranking the lipophilic properties of several structurally diverse compounds simultaneously. In the final study, a new method was developed for caco-2 samples. Compounds were separated by liquid chromatography and quantified by selected reaction monitoring using mass spectrometry. This method was used for caco-2 samples, where absorption of ten chemically and physiologically different compounds was screened using both single and nin- one approaches. These three studies used mass spectrometry for compound identification, method transfer and quantitation in the area of mixture analysis. Different mass spectrometric scanning modes for the triple quadrupole instrument were used in each method. Early drug discovery with n-in-one is area where mass spectrometric analysis, its possibilities and proper use, is especially important.

Measurement of the Single Top Quark Production Cross Section at CDF

We report a measurement of the single top quark production cross section in 2.2 ~fb-1 of p-pbar collision data collected by the Collider Detector at Fermilab at sqrt{s}=1.96 TeV. Candidate events are classified as signal-like by three parallel analyses which use likelihood, matrix element, and neural network discriminants. These results are combined in order to improve the sensitivity. We observe a signal consistent with the standard model prediction, but inconsistent with the background-only model by 3.7 standard deviations with a median expected sensitivity of 4.9 standard deviations. We measure a cross section of 2.2 +0.7 -0.6(stat+sys) pb, extract the CKM matrix element value |V_{tb}|=0.88 +0.13 -0.12 (stat+sys) +- 0.07(theory), and set the limit |V_{tb}|>0.66 at the 95% C.L.

Inclusive Search for Standard Model Higgs Boson Production in the WW Decay Channel using the CDF II Detector

We present a search for standard model (SM) Higgs boson production using ppbar collision data at sqrt(s) = 1.96 TeV, collected with the CDF II detector and corresponding to an integrated luminosity of 4.8 fb-1. We search for Higgs bosons produced in all processes with a significant production rate and decaying to two W bosons. We find no evidence for SM Higgs boson production and place upper limits at the 95% confidence level on the SM production cross section (sigma(H)) for values of the Higgs boson mass (m_H) in the range from 110 to 200 GeV. These limits are the most stringent for m_H > 130 GeV and are 1.29 above the predicted value of sigma(H) for mH = 165 GeV.

First Measurement of the b-Jet Cross Section in Events with a W Boson in pp̅ Collisions at √s=1.96 TeV

The cross section for jets from b quarks produced with a W boson has been measured in ppbar collision data from 1.9/fb of integrated luminosity recorded by the CDF II detector at the Tevatron. The W+b-jets process poses a significant background in measurements of top quark production and prominent searches for the Higgs boson. We measure a b-jet cross section of 2.74 +- 0.27(stat.) +- 0.42(syst.) pb in association with a single flavor of leptonic W boson decay over a limited kinematic phase space. This measured result cannot be accommodated in several available theoretical predictions.

Measurement of the WW+WZ Production Cross Section Using the lepton+jets Final State at CDF II

We report two complementary measurements of the WW+WZ cross section in the final state consisting of an electron or muon, missing transverse energy, and jets, performed using p\bar{p} collision data at sqrt{s} = 1.96 TeV collected by the CDF II detector. The first method uses the dijet invariant mass distribution while the second more sensitive method uses matrix-element calculations. The result from the second method has a signal significance of 5.4 sigma and is the first observation of WW+WZ production using this signature. Combining the results gives sigma_{WW+WZ} = 16.0 +/- 3.3 pb, in agreement with the standard model prediction.

Search for R-Parity Violating Decays of Sneutrinos to eμ, μτ, and eτ Pairs in pp̅ Collisions at √s=1.96 TeV

We present a search for tau sneutrino production using the Tevatron ppbar collision data collected with the CDF II detector and corresponding to an integrated luminosity of 1 fb^-1. We focus on the scenarios predicted by the R-parity violating (RPV) supersymmetric models in which tau sneutrinos decay to two charged leptons of different flavor. With the data consistent with the standard model expectations, we set the upper limits on sigma(ppbar -> tau sneutrino)*BR(tau sneutrino ->emu,mutau,etau) and use these results to constrain the RPV couplings as a function of tau sneutrino mass.