Precipitation-induced runoff and leaching from milled peat mining mires by peat types : a comparative method for estimating the loading of water bodies during peat pruduction

Precipitation-induced runoff and leaching from milled peat mining mires by peat types: a comparative method for estimating the loading of water bodies during peat production. This research project in environmental geology has arisen out of an observed need to be able to predict more accurately the loading of watercourses with detrimental organic substances and nutrients from already existing and planned peat production areas, since the authorities capacity for insisting on such predictions covering the whole duration of peat production in connection with evaluations of environmental impact is at present highly limited. National and international decisions regarding monitoring of the condition of watercourses and their improvement and restoration require more sophisticated evaluation methods in order to be able to forecast watercourse loading and its environmental impacts at the stage of land-use planning and preparations for peat production.The present project thus set out from the premise that it would be possible on the basis of existing mire and peat data properties to construct estimates for the typical loading from production mires over the whole duration of their exploitation. Finland has some 10 million hectares of peatland, accounting for almost a third of its total area. Macroclimatic conditions have varied in the course of the Holocene growth and development of this peatland, and with them the habitats of the peat-forming plants. Temperatures and moisture conditions have played a significant role in determining the dominant species of mire plants growing there at any particular time, the resulting mire types and the accumulation and deposition of plant remains to form the peat. The above climatic, environmental and mire development factors, together with ditching, have contributed, and continue to contribute, to the existence of peat horizons that differ in their physical and chemical properties, leading to differences in material transport between peatlands in a natural state and mires that have been ditched or prepared for forestry and peat production. Watercourse loading from the ditching of mires or their use for peat production can have detrimental effects on river and lake environments and their recreational use, especially where oxygen-consuming organic solids and soluble organic substances and nutrients are concerned. It has not previously been possible, however, to estimate in advance the watercourse loading likely to arise from ditching and peat production on the basis of the characteristics of the peat in a mire, although earlier observations have indicated that watercourse loading from peat production can vary greatly and it has been suggested that differences in peat properties may be of significance in this. Sprinkling is used here in combination with simulations of conditions in a milled peat production area to determine the influence of the physical and chemical properties of milled peats in production mires on surface runoff into the drainage ditches and the concentrations of material in the runoff water. Sprinkling and extraction experiments were carried out on 25 samples of milled Carex (C) and Sphagnum (S) peat of humification grades H 2.5 8.5 with moisture content in the range 23.4 89% on commencement of the first sprinkling, which was followed by a second sprinkling 24 hours later. The water retention capacity of the peat was best, and surface runoff lowest, with Sphagnum and Carex peat samples of humification grades H 2.5 6 in the moisture content class 56 75%. On account of the hydrophobicity of dry peat, runoff increased in a fairly regular manner with drying of the sample from 55% to 24 30%. Runoff from the samples with an original moisture content over 55% increased by 63% in the second round of sprinkling relative to the first, as they had practically reached saturation point on the first occasion, while those with an original moisture content below 55% retained their high runoff in the second round, due to continued hydrophobicity. The well-humified samples (H 6.5 8.5) with a moisture content over 80% showed a low water retention capacity and high runoff in both rounds of sprinkling. Loading of the runoff water with suspended solids, total phosphorus and total nitrogen, and also the chemical oxygen demand (CODMn O2), varied greatly in the sprinkling experiment, depending on the peat type and degree of humification, but concentrations of the same substances in the two sprinklings were closely or moderately closely correlated and these correlations were significant. The concentrations of suspended solids in the runoff water observed in the simulations of a peat production area and the direct surface runoff from it into the drainage ditch system in response to rain (sprinkling intensity 1.27 mm/min) varied c. 60-fold between the degrees of humification in the case of the Carex peats and c. 150-fold for the Sphagnum peats, while chemical oxygen demand varied c. 30-fold and c. 50-fold, respectively, total phosphorus c. 60-fold and c. 66-fold, total nitrogen c. 65-fold and c. 195-fold and ammonium nitrogen c. 90-fold and c. 30-fold. The increases in concentrations in the runoff water were very closely correlated with increases in humification of the peat. The correlations of the concentrations measured in extraction experiments (48 h) with peat type and degree of humification corresponded to those observed in the sprinkler experiments. The resulting figures for the surface runoff from a peat production area into the drainage ditches simulated by means of sprinkling and material concentrations in the runoff water were combined with statistics on the mean extent of daily rainfall (0 67 mm) during the frost-free period of the year (May October) over an observation period of 30 years to yield typical annual loading figures (kg/ha) for suspended solids (SS), chemical oxygen demand of organic matter (CODmn O2), total phosphorus (tot. P) and total nitrogen (tot. N) entering the ditches with respect to milled Carex (C) and Sphagnum (S) peats of humification grades H 2.5 8.5. In order to calculate the loading of drainage ditches from a milled peat production mire with the aid of these annual comparative values (in kg/ha), information is required on the properties of the intended production mire and its peat. Once data are available on the area of the mire, its peat depth, peat types and their degrees of humification, dry matter content, calorific value and corresponding energy content, it is possible to produce mutually comparable estimates for individual mires with respect to the annual loading of the drainage ditch system and the surrounding watercourse for the whole service life of the production area, the duration of this service life, determinations of energy content and the amount of loading per unit of energy generated (kg/MWh). In the 8 mires in the Köyhäjoki basin, Central Ostrobothnia, taken as an example, the loading of suspended solids (SS) in the drainage ditch networks calculated on the basis of the typical values obtained here and existing mire and peat data and expressed per unit of energy generated varied between the mires and horizons in the range 0.9 16.5 kg/MWh. One of the aims of this work was to develop means of making better use of existing mire and peat data and the results of corings and other field investigations. In this respect combination of the typical loading values (kg/ha) obtained here for S, SC, CS and C peats and the various degrees of humification (H 2.5 8.5) with the above mire and peat data by means of a computer program for the acquisition and handling of such data would enable all the information currently available and that deposited in the system in the future to be used for defining watercourse loading estimates for mires and comparing them with the corresponding estimates of energy content. The intention behind this work has been to respond to the challenge facing the energy generation industry to find larger peat production areas that exert less loading on the environment and to that facing the environmental authorities to improve the means available for estimating watercourse loading from peat production and its environmental impacts in advance. The results conform well to the initial hypothesis and to the goals laid down for the research and should enable watercourse loading from existing and planned peat production to be evaluated better in the future and the resulting impacts to be taken into account when planning land use and energy generation. The advance loading information available in this way would be of value in the selection of individual peat production areas, the planning of their exploitation, the introduction of water protection measures and the planning of loading inspections, in order to achieve controlled peat production that pays due attention to environmental considerations.

Heating values of mature trees.

The effective heating values of the above and below ground biomass components of mature Scots pine (Pinus sylvestris), Norway spruce (Picea abies), downy birch (Betula pubescens), silver birch (Betula pendula), grey alder (Alnus incana), black alder (Alnus glutinosa) and trembling aspen (Populus tremula) were studied. Each sample tree was divided into wood, bark and foliage components. Bomb calorimetry was used to determine the calorimetric heating values. The species is a significant factor in the heating value of individual tree components. The heating value of the wood proper is highest in conifers. Broad-leaved species have a higher heating value of bark than conifers. The species factor diminishes when the weighted heating value of crown, whole stems or stump-root-system are considered. The crown material has a higher heating value per unit weight in comparison with fuelwood from small-sized stems or wholetrees. The additional advantages of coniferous crown material are that it is a non-industrial biomass resource and is readily available. The variability of both the chemical composition and the heating value is small in any given tree component of any species. However, lignin, carbohydrate and extractive content were found to vary from one part of the tree to another and to correlate with the heating value.

Other Side of This Life : Death, Value, and Social Being in Thomas Pynchon's Fiction

This dissertation analyzes the interrelationship between death, the conditions of (wo)man s social being, and the notion of value as it emerges in the fiction of the American novelist Thomas Pynchon (1937 ). Pynchon s present work includes six novels V. (1963), The Crying of Lot 49 (1966), Gravity s Rainbow (1973), Vineland (1990), Mason & Dixon (1997), Against the Day (2006) and several short stories. Death constitues a central thematic in Pynchon s work, and it emerges through recurrent questions of mortality, suicide, mass destruction, sacrifice, afterlife, entropy, the relationship between the animate and the inanimate, and the limits of representation. In Pynchon, death is never a mere biological given (or event); it is always determined within a certain historical, cultural, and ideological context. Throughout his work, Pynchon questions the strict ontological separation of life and death by showing the relationship between this separation and social power. Conceptual divisions also reflect the relationship between society and its others, and death becomes that through which lines of social demarcation are articulated. Determined as a conceptual and social "other side", death in Pynchon forms a challenge to modern culture, and makes an unexpected return: the dead return to haunt the living, the inanimate and the animate fuse, and technoscientific attempts at overcoming and controlling death result in its re-emergence in mass destruction and ecological damage. The questioning of the ontological line also affects the structuration of Pynchon's prose, where the recurrent narrated and narrative desire to reach the limits of representation is openly associated with death. Textualized, death appears in Pynchon's writing as a sudden rupture within the textual functioning, when the "other side", that is, the bare materiality of the signifier is foregrounded. In this study, Pynchon s cultural criticism and his poetics come together, and I analyze the subversive role of death in his fiction through Jean Baudrillard s genealogy of the modern notion of death from L échange symbolique et la mort (1976). Baudrillard sees an intrinsic bond between the social repression of death in modernity and the emergence of modern political economy, and in his analysis economy and language appear as parallel systems for generating value (exchange value/ sign-value). For Baudrillard, the modern notion of death as negativity in relation to the positivity of life, and the fact that death cannot be given a proper meaning, betray an antagonistic relation between death and the notion of value. As a mode of negativity (that is, non-value), death becomes a moment of rupture in relation to value-based thinking in short, rationalism. Through this rupture emerges a form of thinking Baudrillard labels the symbolic, characterized by ambivalence and the subversion of conceptual opposites.

Composition operators, Aleksandrov measures and value distribution of analytic maps in the unit disc

A composition operator is a linear operator that precomposes any given function with another function, which is held fixed and called the symbol of the composition operator. This dissertation studies such operators and questions related to their theory in the case when the functions to be composed are analytic in the unit disc of the complex plane. Thus the subject of the dissertation lies at the intersection of analytic function theory and operator theory. The work contains three research articles. The first article is concerned with the value distribution of analytic functions. In the literature there are two different conditions which characterize when a composition operator is compact on the Hardy spaces of the unit disc. One condition is in terms of the classical Nevanlinna counting function, defined inside the disc, and the other condition involves a family of certain measures called the Aleksandrov (or Clark) measures and supported on the boundary of the disc. The article explains the connection between these two approaches from a function-theoretic point of view. It is shown that the Aleksandrov measures can be interpreted as kinds of boundary limits of the Nevanlinna counting function as one approaches the boundary from within the disc. The other two articles investigate the compactness properties of the difference of two composition operators, which is beneficial for understanding the structure of the set of all composition operators. The second article considers this question on the Hardy and related spaces of the disc, and employs Aleksandrov measures as its main tool. The results obtained generalize those existing for the case of a single composition operator. However, there are some peculiarities which do not occur in the theory of a single operator. The third article studies the compactness of the difference operator on the Bloch and Lipschitz spaces, improving and extending results given in the previous literature. Moreover, in this connection one obtains a general result which characterizes the compactness and weak compactness of the difference of two weighted composition operators on certain weighted Hardy-type spaces.

Drivers of ERP Systems´ Business Value

ERP system implementations have evolved so rapidly that now they represent a must-have within industries. ERP systems are viewed as the cost of doing business. Yet, the research that adopted the resource-based view on the business value of ERP systems concludes that companies may gain competitive advantage when they successfully manage their ERP projects, when they carefully reengineer the organization and when they use the system in line with the organizational strategies. This thesis contributes to the literature on ERP business value by examining key drivers of ERP business value in organizations. The first research paper investigates how ERP systems with different degrees of system functionality are correlated with the development of the business performance after the completion of the ERP projects. The companies with a better perceived system functionality obtained efficiency benefits in the first two years of post-implementation. However, in the third year there is no significant difference in efficiency benefits between successfully and less successfully managed ERP projects. The second research paper examines what business process changes occur in companies implementing ERP for different motivations and how these changes impact the business performance. The findings show that companies reported process changes mainly in terms of workflow changes. In addition, the companies having a business-led motivation focused more on observing average costs of each increase in the input unit. Companies having a technological-led motivation focused more on the benefits coming from the fit of the system with the organizational processes. The third research paper considers the role of alignment between ERP and business strategies for the realization of business value from ERP use. These findings show that strategic alignment and business process changes are significantly correlated with the perceived benefits of ERP at three levels: internal efficiency, customers and financial. Overall, by combining quantitative and qualitative research methods, this thesis puts forward a model that illustrates how successfully managed ERP projects, aligned with the business strategy, have automate and informate effects on processes that ultimately improve the customer service and reduce the companies’ costs.

Value Creation in Professional Service Processes. Propositions for Understanding Financial Value from a Customer Perspective

Many service management studies have suggested that service providers benefit from having long-term relationships with customers, but the argument from a customer perspective has been vague. However, especially in the business-to-business context, an analysis of financial value creation seems appropriate also from a customer perspective. Hence, the aim of this study is to develop a framework for understanding monetary value creation in professional service assignments from a customer perspective. The contribution of this study is an improved insight and framework for understanding financial value creation from a customer perspective in a professional service delivery process. The sources for monetary differences between transactional and long-term service providers are identified and quantified in case settings. This study contributes to the existing literature in service and relationship management by extending the customer’s viewpoint from perceived value to measurable monetary value. The contribution to the professional services lies in the process focus as opposed to the outcome focus, which is often accentuated in the existing professional services literature. The findings from the qualitative data suggest that a customer company may benefit from having an improved understanding of the service delivery (service assignment) process and the factors affecting the monetary value creation during the process. It is suggested that long-term relationships with service providers create financial value in the case settings in the short term. The findings also indicate that by using the improved understanding, a customer company can make more informed decisions when selecting a service provider for a specific assignment. Mirel Leino is associated with CERS, the Center for Relationship Marketing and Service Management at the Swedish School of Economics and Business Administration

Customer Value of Website Communication in Business-to-business Relationships

During past years, we have witnessed the widespread use of websites in communication in business-to-business relationships. If developed appropriately, such communication can result in numerous positive implications for business relationships, amplifying the importance of designing website communication that meet customer needs. In doing that, an understanding of value of website communication for customers is crucial. The study develops a theoretical framework of customer value of website communication in business-to-business relationships. Theoretically, the study builds on the interaction approach to industrial marketing, different approaches to customer value and inter-organisational communication theory. The empirical part involves a case study with a seller and nine different customer companies in the elevator industry. The data collection encompasses interviews and observations of representatives from the customer companies, interviews with the seller and an analysis of various reports of the seller. The continuous iteration between the theory and the case study resulted in the integrated approach to customer value and in the holistic theoretical framework of customer value of website communication in business-to-business relationships. The framework incorporates and elicits meanings of different components of customer value: website communication characteristics that act as drivers of customer value, customer consequences – both benefits and sacrifices, customer end-states as the final goals that lead customer actions, and different types of linkages between these components. Compared to extant research on customer value, the study offers a more holistic framework of customer value that depicts its complexity and richness. In addition, it portrays customer value in the neglected context of website communication. The findings of the study can be used as tools in any analysis of customer value. They are also of relevance in designing appropriate website communication as well as in developing effective website communication strategies. Nataša Golik Klanac is associated with the Centre for Relationship Marketing and Service Management (CERS) at Hanken.

Customer Value Formation in Practice: A Practice-Theoretical Approach

This thesis introduces a practice-theoretical approach to understanding customer value formation to be used in the field of service marketing and management. In contrast to current studies trying to understand value formation by analysing customers as independent actors and thinkers, it is in this work suggested that customer value formation can be better understood by analysing how value is formed in the practices and contexts of the customers. The theoretical approach developed in this thesis is applied in an empirical study of family cruises. The theoretical analysis in this thesis results in a new approach for understanding customer value formation. Customer value is, according to this new approach, something that is formed in practice, meaning that value is formed in constellations of the customer and contextual elements like tools, physical spaces and contextually embedded images and know-how. This view is different from the current views that tend to see value as subjectively created, co-created, perceived or experienced by the customer. The new approach has implications on how we view customer value, but also on the methods and techniques we can use to understand customer value in empirical studies. It is also suggested that services could in fact be reconceptualised as practices. According to the stance presented in this thesis the empirical analysis of customer value should not focus on individual customers, but should instead take the contextual entity of practices as its unit of analysis. Therefore, ethnography is chosen as a method for exploring how customer value is formed in practice in the case of family cruises on a specific cruise vessel. The researcher has studied six families, as well as the context of the cruise vessel with various techniques including non-participant observation, participant observation and interviews in order to create an ethnographic understanding of the practices carried out on board. Twenty-one different practices are reported and discussed in order to provide necessary insight to customer value formation that can be used as input for service development.

Time and Location as Customer Perceived Value Drivers

Since the emergence of service marketing, the focus of service research has evolved. Currently the focus of research is shifting towards value co-created by the customer. Consequently, value creation is increasingly less fixed to a specific time or location controlled by the service provider. However, present service management models, although acknowledging customer participation and accessibility, have not considered the role of the empowered customer who may perform the service at various locations and time frames. The present study expands this scope and provides a framework for exploring customer perceived value from a temporal and spatial perspective. The framework is used to understand and analyse customer perceived value and to explore customer value profiles. It is proposed that customer perceived value can be conceptualised as a function of technical, functional, temporal and spatial value dimensions. These dimensions are suggested to have value-increasing and value-decreasing facets. This conceptualisation is empirically explored in an online banking context and it is shown that time and location are more important value dimensions relative to the technical and functional dimensions. The findings demonstrate that time and location are important not only in terms of having the possibility to choose when and where the service is performed. Customers also value an efficient and optimised use of time and a private and customised service location. The study demonstrates that time and location are not external elements that form the service context, but service value dimensions, in addition to the technical and functional dimensions. This thesis contributes to existing service management research through its framework for understanding temporal and spatial dimensions of perceived value. Practical implications of the study are that time and location need to be considered as service design elements in order to differentiate the service from other services and create additional value for customers. Also, because of increased customer control and the importance of time and location, it is increasingly relevant for service providers to provide a facilitating arena for customers to create value, rather than trying to control the value creation process. Kristina Heinonen is associated with CERS, the Center for Relationship Marketing and Service Management at the Swedish School of Economics and Business Administration

Customer asset management in action: using customers portfolio for allocating resources across business-to-business relationships for improved shareholder value

Suvi Nenonen Customer asset management in action: using customer portfolios for allocating resources across business-to-business relationships for improved shareholder value Customers are crucial assets to all firms as customers are the ultimate source of all cash flows. Regardless this financial importance of customer relationships, for decades there has been a lack of suitable frameworks explaining how customer relationships contribute to the firm financial performance and how this contribution can be actively managed. In order to facilitate a better understanding of the customer asset, contemporary marketing has investigated the use of financial theories and asset management practices in the customer relationship context. Building on this, marketing academics have promoted the customer lifetime value concept as a solution for valuating and managing customer relationships for optimal financial outcomes. However, the empirical investigation of customer asset management lags behind the conceptual development steps taken. Additionally, the practitioners have not embraced the use of customer lifetime value in guiding managerial decisions - especially in the business-to-business context. The thesis points out that there are fundamental differences between customer relationships and investment instruments as investment targets, effectively eliminating the possibility to use financial theories in a customer relationships context or to optimize the customer base as a single investment portfolio. As an alternative, the thesis proposes the use of customer portfolio approach for allocating resources across the customer base for improved shareholder value. In the customer portfolio approach, the customer base of a firm is divided into multiple portfolios based on customer relationships’ potential to contribute to the shareholder value creation. After this, customer management concepts are tailored to each customer portfolio, designed to improve the shareholder value in their own respect. Therefore, effective customer asset management with the customer portfolio approach necessitates that firms are able to manage multiple parallel customer management concepts, or business models, simultaneously. The thesis is one of the first empirical studies on customer asset management, bringing empirical evidence from multiple business-to-business case studies on how customer portfolio models can be formed, how customer portfolios can be managed, and how customer asset management has contributed to the firm financial performance.