Characterisation and processing of amorphous binary mixtures with low glass transition temperature

The number of drug substances in formulation development in the pharmaceutical industry is increasing. Some of these are amorphous drugs and have glass transition below ambient temperature, and thus they are usually difficult to formulate and handle. One reason for this is the reduced viscosity, related to the stickiness of the drug, that makes them complicated to handle in unit operations. Thus, the aim in this thesis was to develop a new processing method for a sticky amorphous model material. Furthermore, model materials were characterised before and after formulation, using several characterisation methods, to understand more precisely the prerequisites for physical stability of amorphous state against crystallisation. The model materials used were monoclinic paracetamol and citric acid anhydrate. Amorphous materials were prepared by melt quenching or by ethanol evaporation methods. The melt blends were found to have slightly higher viscosity than the ethanol evaporated materials. However, melt produced materials crystallised more easily upon consecutive shearing than ethanol evaporated materials. The only material that did not crystallise during shearing was a 50/50 (w/w, %) blend regardless of the preparation method and it was physically stable at least two years in dry conditions. Shearing at varying temperatures was established to measure the physical stability of amorphous materials in processing and storage conditions. The actual physical stability of the blends was better than the pure amorphous materials at ambient temperature. Molecular mobility was not related to the physical stability of the amorphous blends, observed as crystallisation. Molecular mobility of the 50/50 blend derived from a spectral linewidth as a function of temperature using solid state NMR correlated better with the molecular mobility derived from a rheometer than that of differential scanning calorimetry data. Based on the results obtained, the effect of molecular interactions, thermodynamic driving force and miscibility of the blends are discussed as the key factors to stabilise the blends. The stickiness was found to be affected glass transition and viscosity. Ultrasound extrusion and cutting were successfully tested to increase the processability of sticky material. Furthermore, it was found to be possible to process the physically stable 50/50 blend in a supercooled liquid state instead of a glassy state. The method was not found to accelerate the crystallisation. This may open up new possibilities to process amorphous materials that are otherwise impossible to manufacture into solid dosage forms.

Mannans as film formers and emulsion stabilizers

Mannans are abundant plant polysaccharides found in the endosperm of certain leguminous seeds (guar gum galactomannan, GG; locust bean gum galactomannan, LBG), in the tuber of the konjac plant (konjac glucomannan, KGM), and in softwoods (galactoglucomannan, GGM). This study focused on the effects of the chemical structure of mannans on their film-forming and emulsion-stabilizing properties. Special focus was on spruce GGM, which is an interesting new product from forest biorefineries. A plasticizer was needed for the formation of films from mannans other than KGM and the optimal proportion was 40% (w/w of polymers) glycerol or sorbitol. Galactomannans with lower galactose content (LBG, modified GG) produced films with higher elongation at break and tensile strength. The mechanical properties of GG-based films were improved by decreasing the degree of polymerization of the polysaccharide with moderate mannanase treatments. The improvement of mechanical properties of GGM-based films was sought by blending GGM with each of poly(vinyl alcohol) (PVOH), corn arabinoxylan (cAX), and KGM. Adding other polymers increased the elongation at break of GGM blend films. The tensile strength of films increased with increasing amounts of PVOH and KGM, but the effect of cAX was the opposite. Dynamic mechanical analysis showed two separate loss modulus peaks for blends of GGM and PVOH, but a single peak for all other films. Optical and scanning electron microscopy confirmed good miscibility of GGM with cAX and KGM. In contrast, films blended from GGM and PVOH showed phase separation. GGM and KGM were mixed with cellulose nanowhiskers (CNW) to form composite films. Addition of CNW to KGM-based films induced the formation of fiberlike structures with lengths of several millimeters. In GGM-based films, rodlike structures with lengths of tens of micrometers were formed. Interestingly, the notable differences in the film structure did not appear to be related to the mechanical and thermal properties of the films. Permeability properties of GGM-based films were compared to those of films from commercial mannans KGM, GG, and LBG. GGM-based films had the lowest water vapor permeability when compared to films from other mannans. The oxygen permeability of GGM films was of the same magnitude as that of commercial polyethylene / ethylene vinyl alcohol / polyethylene laminate film. The aroma permeability of GGM films was low. All films were transparent in the visible region, but GGM films blocked the light transmission in the ultraviolet region of the spectra. The stabilizing effect of GGM on a model beverage emulsion system was studied and compared to that of GG, LBG, KGM, and cAX. In addition, GG was enzymatically modified in order to examine the effect of the degree of polymerization and the degree of substitution of galactomannans on emulsion stability. Use of GGM increased the turbidity of emulsions both immediately after preparation and after storage of up to 14 days at room temperature. GGM emulsions had higher turbidity than the emulsions containing other mannans. Increasing the storage temperature to +45 ºC led to rapid emulsion breakdown, but a decrease in storage temperature increased emulsion stability after 14 days. A low degree of polymerization and a high degree of substitution of the modified galactomannans were associated with a decrease in emulsion turbidity.

Vapaussodan perintö : Valkoisuus paikallisyhteisössä sisältö, ylläpitäjät ja rapautuminen Iisalmessa 1918 1933

Legacy of the Finnish Civil War. White nationalism in a local community - content, supporters and disintegration in Iisalmi 1918 - 1933. Using one local community (Iisalmi) as an example, this study centres around the winners of the 1918 Finnish Civil War, exploring their collectivity its subsequent breakdown during 1918 - 1933. Referring to this collectivity by the methodological concept of white nationalism, the thesis first discusses its origin, content and forms. This is done by elucidating the discourses and symbols that came to constitute central ideological and ritualistic elements of white nationalism. Next, the thesis describes and analyzes fundamental actors of the Finnish civil society (such as White Guard and Lotta Svärd) that maintained white nationalism as a form of counter or parallel hegemony to the integration policy of the 1920s. Also highlighted is the significance of white nationalism as a power broker and an instrument of moral regulation in inter-war Finnish society. A third contribution of this thesis involves presenting a new interpretation of the legacy of the Civil War, i.e., the right-wing radicalism during the years 1919 - 1933. I shall describe attempts of the extreme right (Lapua Movement and IKL, Patriotic People s Movement) to use the white nationalism discourse as a vehicle for their political ambitions, as well as the strong counter-reaction these attempts induced among other middle-class groups. At the core of this research is the concept of white nationalism, whose key elements were the sacrifice of 1918, fatherland under threat and warrior citizenship. Winners of the civil war strove to blend these ideals into a homogenized culture, to which the working class and wavering members of the middle-class were coaxed and pressurized to subscribe. The thesis draws on Anglo-American symbol theories, theory of social identity groups, Antonio Gramsci s concept of cultural hegemony and Stuart Hall s approach to discourse and power.

Domestic labour relations in India : Vulnerability and gendered life courses in Jaipur

This study explores labour relations between domestic workers and employers in India. It is based on interviews with both employers and workers, and ethnographically oriented field work in Jaipur, carried out in 2004-2007. Combining development studies with gender studies, labour studies, and childhood studies, it asks how labour relations between domestic workers and employers are formed in Jaipur, and how female domestic workers trajectories are created. Focusing on female part-time maids and live-in work arrangements, the study analyses children s work in the context of overall work force, not in isolation from it. Drawing on feminist Marxism, domestic labour relations are seen as an arena of struggle. The study takes an empirical approach, showing class through empiria and shows how paid domestic work is structured and stratified through intersecting hierarchies of class, caste, gender, age, ethnicity and religion. The importance of class in domestic labour relations is reiterated, but that of caste, so often downplayed by employers, is also emphasized. Domestic workers are crucial to the functioning of middle and upper middle class households, but their function is not just utilitarian. Through them working women and housewives are able to maintain purity and reproduce class disctinctions, both between poor and middle classes and lower and upper middle classes. Despite commodification of work relations, traditional elements of service relationships have been retained, particularly through maternalist practices such as gift giving, creating a peculiar blend of traditional and market practices. Whilst employers of part-time workers purchase services in a segmented market from a range of workers for specific, traditional live-in workers are also hired to serve employers round the clock. Employers and workers grudgingly acknowledged their dependence on one another, employers seeking various strategies to manage fear of servant crime, such as the hiring of children or not employing live-in workers in dual-earning households. Paid domestic work carries a heavy stigma and provide no entry to other jobs. It is transmitted from mothers to daughters and working girls were often the main income providers in their families. The diversity of working conditions is analysed through a continuum of vulnerability, generic live-in workers, particularly children and unmarried young women with no close family in Jaipur, being the most vulnerable and experienced part-time workers the least vulnerable. Whilst terms of employment are negotiated informally and individually, some informal standards regarding salary and days off existed for maids. However, employers maintain that workings conditions are a matter of individual, moral choice. Their reluctance to view their role as that of employers and the workers as their employees is one of the main stumbling blocks in the way of improved working conditions. Key words: paid domestic work, India, children s work, class, caste, gender, life course

Harvesting undelimbed Scots pine (Pinus sylvestris L.) from first thinnings for integrated production of kraft pulp and energy

The present study evaluates the feasibility of undelimbed Scots pine (Pinus sylvestris L.) for integrated production of pulp and energy in a kraft pulp mill from the technical, economic and environmental points of view, focusing on the potential of bundle harvesting. The feasibility of tree sections for pulp production was tested by conducting an industrial wood-handling experiment, laboratory cooking and bleaching trials, using conventional small-diameter Scots pine pulpwood as a reference. These trials showed that undelimbed Scots pine sections can be processed in favourable conditions as a blend with conventional small-diameter pulpwood without reducing the pulp quality. However, fibre losses at various phases of the process may increase when using undelimbed material. In the economic evaluation, both pulp production and wood procurement costs were considered, using the relative wood paying capability of a kraft pulp mill as a determinant. The calculations were made for three Scots pine first-thinning stands with the breast-height diameter of the removal (6 12 cm) as the main distinctive factor. The supply chains included in the comparison were based on cut-to-length harvesting, whole-tree harvesting and bundle harvesting (whole-tree bundling). With the current ratio of pulp and energy prices, the wood paying capability declines with an increase in the proportion of the energy fraction of the raw material. The supply system based on the cut-to-length method was the most efficient option, resulting in the highest residual value at stump in most cases. A decline in the pulp price and an increase in the energy price improved the competitiveness of the whole-tree systems. With short truck transportation distances and low pulp prices, however, the harvesting of loose whole trees can result in higher residual value at stump in small-diameter stands. While savings in transportation costs did not compensate for the high cutting and compaction costs by the second prototype of the bundle harvester, an increase in transportation distances improved its competitiveness. Since harvesting undelimbed assortments increases nutrient export from the site, which can affect soil productivity, the whole-tree alternatives included in the present study cannot be recommended on infertile peatlands and mineral soils. The harvesting of loose whole trees or bundled whole trees implies a reduction in protective logging residues and an increase in site traffic or payloads. These factors increase the risk of soil damage, especially on peat soils with poor bearing capacity. Within the wood procurement parameters which were examined, the CO2 emissions of the supply systems varied from 13 27 kg m3. Compaction of whole trees into bundles reduced emissions from transportation by 30 39%, but these reductions were insufficient to compensate for the increased emissions from cutting and compaction.