Analyzing changes in macro-level drivers of country-specific emissions : The role of consumption, technology and trade

Industrial ecology is an important field of sustainability science. It can be applied to study environmental problems in a policy relevant manner. Industrial ecology uses ecosystem analogy; it aims at closing the loop of materials and substances and at the same time reducing resource consumption and environmental emissions. Emissions from human activities are related to human interference in material cycles. Carbon (C), nitrogen (N) and phosphorus (P) are essential elements for all living organisms, but in excess have negative environmental impacts, such as climate change (CO2, CH4 N2O), acidification (NOx) and eutrophication (N, P). Several indirect macro-level drivers affect emissions change. Population and affluence (GDP/capita) often act as upward drivers for emissions. Technology, as emissions per service used, and consumption, as economic intensity of use, may act as drivers resulting in a reduction in emissions. In addition, the development of country-specific emissions is affected by international trade. The aim of this study was to analyse changes in emissions as affected by macro-level drivers in different European case studies. ImPACT decomposition analysis (IPAT identity) was applied as a method in papers I III. The macro-level perspective was applied to evaluate CO2 emission reduction targets (paper II) and the sharing of greenhouse gas emission reduction targets (paper IV) in the European Union (EU27) up to the year 2020. Data for the study were mainly gathered from official statistics. In all cases, the results were discussed from an environmental policy perspective. The development of nitrogen oxide (NOx) emissions was analysed in the Finnish energy sector during a long time period, 1950 2003 (paper I). Finnish emissions of NOx began to decrease in the 1980s as the progress in technology in terms of NOx/energy curbed the impact of the growth in affluence and population. Carbon dioxide (CO2) emissions related to energy use during 1993 2004 (paper II) were analysed by country and region within the European Union. Considering energy-based CO2 emissions in the European Union, dematerialization and decarbonisation did occur, but not sufficiently to offset population growth and the rapidly increasing affluence during 1993 2004. The development of nitrogen and phosphorus load from aquaculture in relation to salmonid consumption in Finland during 1980 2007 was examined, including international trade in the analysis (paper III). A regional environmental issue, eutrophication of the Baltic Sea, and a marginal, yet locally important source of nutrients was used as a case. Nutrient emissions from Finnish aquaculture decreased from the 1990s onwards: although population, affluence and salmonid consumption steadily increased, aquaculture technology improved and the relative share of imported salmonids increased. According to the sustainability challenge in industrial ecology, the environmental impact of the growing population size and affluence should be compensated by improvements in technology (emissions/service used) and with dematerialisation. In the studied cases, the emission intensity of energy production could be lowered for NOx by cleaning the exhaust gases. Reorganization of the structure of energy production as well as technological innovations will be essential in lowering the emissions of both CO2 and NOx. Regarding the intensity of energy use, making the combustion of fuels more efficient and reducing energy use are essential. In reducing nutrient emissions from Finnish aquaculture to the Baltic Sea (paper III) through technology, limits of biological and physical properties of cultured fish, among others, will eventually be faced. Regarding consumption, salmonids are preferred to many other protein sources. Regarding trade, increasing the proportion of imports will outsource the impacts. Besides improving technology and dematerialization, other viewpoints may also be needed. Reducing the total amount of nutrients cycling in energy systems and eventually contributing to NOx emissions needs to be emphasized. Considering aquaculture emissions, nutrient cycles can be partly closed through using local fish as feed replacing imported feed. In particular, the reduction of CO2 emissions in the future is a very challenging task when considering the necessary rates of dematerialisation and decarbonisation (paper II). Climate change mitigation may have to focus on other greenhouse gases than CO2 and on the potential role of biomass as a carbon sink, among others. The global population is growing and scaling up the environmental impact. Population issues and growing affluence must be considered when discussing emission reductions. Climate policy has only very recently had an influence on emissions, and strong actions are now called for climate change mitigation. Environmental policies in general must cover all the regions related to production and impacts in order to avoid outsourcing of emissions and leakage effects. The macro-level drivers affecting changes in emissions can be identified with the ImPACT framework. Statistics for generally known macro-indicators are currently relatively well available for different countries, and the method is transparent. In the papers included in this study, a similar method was successfully applied in different types of case studies. Using transparent macro-level figures and a simple top-down approach are also appropriate in evaluating and setting international emission reduction targets, as demonstrated in papers II and IV. The projected rates of population and affluence growth are especially worth consideration in setting targets. However, sensitivities in calculations must be carefully acknowledged. In the basic form of the ImPACT model, the economic intensity of consumption and emission intensity of use are included. In seeking to examine consumption but also international trade in more detail, imports were included in paper III. This example demonstrates well how outsourcing of production influences domestic emissions. Country-specific production-based emissions have often been used in similar decomposition analyses. Nevertheless, trade-related issues must not be ignored.

The Networks of Learning in Technological Innovation : The Emergence of Collaboration Across Fields of Expertise

This study addresses four issues concerning technological product innovations. First, the nature of the very early phases or "embryonic stages" of technological innovation is addressed. Second, this study analyzes why and by what means people initiate innovation processes outside the technological community and the field of expertise of the established industry. In other words, this study addresses the initiation of innovation that occurs without the expertise of established organizations, such as technology firms, professional societies and research institutes operating in the technological field under consideration. Third, the significance of interorganizational learning processes for technological innovation is dealt with. Fourth, this consideration is supplemented by considering how network collaboration and learning change when formalized product development work and the commercialization of innovation advance. These issues are addressed through the empirical analysis of the following three product innovations: Benecol margarine, the Nordic Mobile Telephone system (NMT) and the ProWellness Diabetes Management System (PDMS). This study utilizes the theoretical insights of cultural-historical activity theory on the development of human activities and learning. Activity-theoretical conceptualizations are used in the critical assessment and advancement of the concept of networks of learning. This concept was originally proposed by the research group of organizational scientist Walter Powell. A network of learning refers to the interorganizational collaboration that pools resources, ideas and know-how without market-based or hierarchical relations. The concept of an activity system is used in defining the nodes of the networks of learning. Network collaboration and learning are analyzed with regard to the shared object of development work. According to this study, enduring dilemmas and tensions in activity explain the participants' motives for carrying out actions that lead to novel product concepts in the early phases of technological innovation. These actions comprise the initiation of development work outside the relevant fields of expertise and collaboration and learning across fields of expertise in the absence of market-based or hierarchical relations. These networks of learning are fragile and impermanent. This study suggests that the significance of networks of learning across fields of expertise becomes more and more crucial for innovation activities.

Post-industrial Intervention : An Activity-Theoretical Expedition Tracing the Proximal Development of Forms of Conducting Interventions

Ei saatavilla

Ethics in a Technological World : Framing the Questions and Three Approaches

This study addresses the following question: How to think about ethics in a technological world? The question is treated first thematically by framing central issues in the relationship between ethics and technology. This relationship has three distinct facets: i) technological advance poses new challenges for ethics, ii) traditional ethics may become poorly applicable in a technologically transformed world, and iii) the progress in science and technology has altered the concept of rationality in ways that undermine ethical thinking itself. The thematic treatment is followed by the description and analysis of three approaches to the questions framed. First, Hans Jonas s thinking on the ontology of life and the imperative of responsibility is studied. In Jonas s analysis modern culture is found to be nihilistic because it is unable to understand organic life, to find meaning in reality, and to justify morals. At the root of nihilism Jonas finds dualism, the traditional Western way of seeing consciousness as radically separate from the material world. Jonas attempts to create a metaphysical grounding for an ethic that would take the technologically increased human powers into account and make the responsibility for future generations meaningful and justified. The second approach is Albert Borgmann s philosophy of technology that mainly assesses the ways in which technological development has affected everyday life. Borgmann admits that modern technology has liberated humans from toil, disease, danger, and sickness. Furthermore, liberal democracy, possibilities for self-realization, and many of the freedoms we now enjoy would not be possible on a large scale without technology. Borgmann, however, argues that modern technology in itself does not provide a whole and meaningful life. In fact, technological conditions are often detrimental to the good life. Integrity in life, according to him, is to be sought among things and practices that evade technoscientific objectification and commodification. Larry Hickman s Deweyan philosophy of technology is the third approach under scrutiny. Central in Hickman s thinking is a broad definition of technology that is nearly equal to Deweyan inquiry. Inquiry refers to the reflective and experiential way humans adapt to their environment by modifying their habits and beliefs. In Hickman s work, technology consists of all kinds of activities that through experimentation and/or reflection aim at improving human techniques and habits. Thus, in addition to research and development, many arts and political reforms are technological for Hickman. He argues for recasting such distinctions as fact/value, poiesis/praxis/theoria, and individual/society. Finally, Hickman does not admit a categorical difference between ethics and technology: moral values and norms need to be submitted to experiential inquiry as well as all the other notions. This study mainly argues for an interdisciplinary approach to the ethics of technology. This approach should make use of the potentialities of the research traditions in applied ethics, the philosophy of technology, and the social studies on science and technology and attempt to overcome their limitations. This study also advocates an endorsement of mid-level ethics that concentrate on the practices, institutions, and policies of temporal human life. Mid-level describes the realm between the instantaneous and individualistic micro-level and the universal and global macro level.

Essays on Labor Market Frictions, Technological Change and Macroeconomic Fluctuations

The dissertation consists of an introductory chapter and three essays that apply search-matching theory to study the interaction of labor market frictions, technological change and macroeconomic fluctuations. The first essay studies the impact of capital-embodied growth on equilibrium unemployment by extending a vintage capital/search model to incorporate vintage human capital. In addition to the capital obsolescence (or creative destruction) effect that tends to raise unemployment, vintage human capital introduces a skill obsolescence effect of faster growth that has the opposite sign. Faster skill obsolescence reduces the value of unemployment, hence wages and leads to more job creation and less job destruction, unambiguously reducing unemployment. The second essay studies the effect of skill biased technological change on skill mismatch and the allocation of workers and firms in the labor market. By allowing workers to invest in education, we extend a matching model with two-sided heterogeneity to incorporate an endogenous distribution of high and low skill workers. We consider various possibilities for the cost of acquiring skills and show that while unemployment increases in most scenarios, the effect on the distribution of vacancy and worker types varies according to the structure of skill costs. When the model is extended to incorporate endogenous labor market participation, we show that the unemployment rate becomes less informative of the state of the labor market as the participation margin absorbs employment effects. The third essay studies the effects of labor taxes on equilibrium labor market outcomes and macroeconomic dynamics in a New Keynesian model with matching frictions. Three policy instruments are considered: a marginal tax and a tax subsidy to produce tax progression schemes, and a replacement ratio to account for variability in outside options. In equilibrium, the marginal tax rate and replacement ratio dampen economic activity whereas tax subsidies boost the economy. The marginal tax rate and replacement ratio amplify shock responses whereas employment subsidies weaken them. The tax instruments affect the degree to which the wage absorbs shocks. We show that increasing tax progression when taxation is initially progressive is harmful for steady state employment and output, and amplifies the sensitivity of macroeconomic variables to shocks. When taxation is initially proportional, increasing progression is beneficial for output and employment and dampens shock responses.

Consumer Evaluation of Hybrid Innovations (summary section only)

Hybrid innovations, or new products that combine two existing product categories into one, are increasingly popular in today’s marketplace. Despite this proliferation, few studies address them. The purpose of this thesis is to examine consumer evaluation of hybrid innovations by focusing on consumer categorization of such innovations and on factors contributing positively and negatively to their evaluation. This issue is examined by means of three studies. The first study addresses the proportion of consumers categorizing hybrid products as single- versus dual-purpose, what contributes to such a categorization, what differences can be found between the two groups, and if categorization can and should be included in models of innovation adoption. The second study expands on the scope by including motivation as a predictor of consumer evaluation and examines two cognitive and affective factors and their differential impact on innovation evaluation. Finally, the third study examines the product comparisons single- versus dual-purpose categorization induce. These three essays together build up a broader understanding of hybrid innovation evaluation. The thesis uses theories from both psychology and marketing to examine the issues at hand. Conceptual combination and analogical learning theories from psychology are used to comprehend categorization and knowledge transfer. From marketing, consumer behavior and innovation adoption studies are addressed to better understand the link between categorization and product evaluation and the factors contributing to product evaluation. The main results of the current thesis are that (1) most consumers categorize hybrid products as single- and not as dual-purpose products, (2) consumers that categorize them as dual-purpose find them more attractive (3) motivation has a significant effect on consumer evaluation of innovations; cognitive factors promote an emphasis on product net benefits, whereas affective factors induce consumers to consider product meaning in the form of categorization and perceived product complexity, (4) categorization constrains subsequent product evaluation, and (5) categorization can and should be included to models of innovation adoption. Maria Sääksjärvi is associated with CERS, the Center for Relationship Marketing and Service Management at the Swedish School of Economics and Business Administration

Kehittämistutkimus: Tieto- ja viestintätekniikkaa kemian opetukseen

The main aim of the present study was to develop information and communication technology (ICT) based chemistry education. The goals for the study were to support meaningful chemistry learning, research-based teaching and diffusion of ICT innovations. These goals were used as guidelines that form the theoretical framework for this study. This Doctoral Dissertation is based on eight-stage research project that included three design researches. These three design researches were scrutinized as separate case studies in which the different cases were formed according to different design teams: i) one researcher was in charge of the design and teachers were involved in the research process, ii) a research group was in charge of the design and students were involved in the research process, and iii) the design was done by student teams, the research was done collaboratively, and the design process was coordinated by a researcher. The research projects were conducted using mixed method approach, which enabled a comprehensive view on education design. In addition, the three central areas of design research: problem analysis, design solution and design process were included in the research, which was guided by the main research questions formed according to these central areas: 1) design solution: what kind of elements are included in ICT-based learning environments that support meaningful chemistry learning and diffusion of innovation, 2) problem analysis: what kind of new possibilities the designed learning environments offer for the support of meaningful chemistry learning, and 3) design process: what kind of opportunities and challenges does collaboration bring to the design of ICT-based learning environments? The main research questions were answered according to the analysis of the survey and observation data, six designed learning environments and ten design narratives from the three case studies. Altogether 139 chemistry teachers and teacher students were involved in the design processes. The data was mainly analysed by methods of qualitative content analysis. The first main result from the study give new information on the meaningful chemistry learning and the elements of ICT-based learning environment that support the diffusion of innovation, which can help in the development of future ICT-education design. When the designed learning environment was examined in the context of chemistry education, it was evident that an ICT-based chemistry learning environment supporting the meaningful learning of chemistry motivates the students and makes the teacher s work easier. In addition, it should enable the simultaneous fulfilment of several pedagogical goals and activate higher-level cognitive processes. The learning environment supporting the diffusion of ICT innovation is suitable for Finnish school environment, based on open source code, and easy to use with quality chemistry content. According to the second main result, new information was acquired about the possibilities of ICT-based learning environments in supporting meaningful chemistry learning. This will help in setting the goals for future ICT education. After the analysis of design solutions and their evaluations, it can be said that ICT enables the recognition of all elements that define learning environments (i.e. didactic, physical, technological and social elements). The research particularly demonstrates the significance of ICT in supporting students motivation and higher-level cognitive processes as well as versatile visualization resources for chemistry that ICT makes possible. In addition, research-based teaching method supports well the diffusion of studied innovation on individual level. The third main result brought out new information on the significance of collaboration in design research, which guides the design of ICT education development. According to the analysis of design narratives, it can be said that collaboration is important in the execution of scientifically reliable design research. It enables comprehensive requirement analysis and multifaceted development, which improves the reliability and validity of the research. At the same time, it sets reliability challenges by complicating documenting and coordination, for example. In addition, a new method for design research was developed. Its aim is to support the execution of complicated collaborative design projects. To increase the reliability and validity of the research, a model theory was used. It enables time-pound documenting and visualization of design decisions that clarify the process. This improves the reliability of the research. The validity of the research is improved by requirement definition through models. This way learning environments that meet the design goals can be constructed. The designed method can be used in education development from comprehensive to higher level. It can be used to recognize the needs of different interest groups and individuals with regard to processes, technology and substance knowledge as well as interfaces and relations between them. The developed method has also commercial potential. It is used to design learning environments for national and international market.

Information Technology Development Needs in Community Pharmacies : A Strategic Approach

In the context of health care, information technology (IT) has an important role in the operational infrastructure, ranging from business management to patient care. An essential part of the system is medication management in inpatient and outpatient care. Community pharmacists strategy has been to extend practice responsibilities beyond dispensing towards patient care services. Few studies have evaluated the strategic development of IT systems to support this vision. The objectives of this study were to assess and compare independent Finnish community pharmacy owners and staff pharmacists priorities concerning the content and structure of the next generation of community pharmacy IT systems, to explore international experts visions and strategic views on IT development needs in relation to services provided in community pharmacies, to identify IT innovations facilitating patient care services and to evaluate their development and implementation processes, and to assess community pharmacists readiness to adopt innovations. This study applied both qualitative and quantitative methods. A qualitative personal interview of 14 experts in community pharmacy services and related IT from eight countries and a national survey of Finnish community pharmacy owners (mail survey, response rate 53%, n=308), and of a representative sample of staff pharmacists (online survey, response rate 22%, n=373) were conducted. Finnish independent community pharmacy owners gave priority to logistical functions but also to those related to medication information and patient care. The managers and staff pharmacists have different views of the importance of IT features, reflecting their different professional duties in the community pharmacy. This indicates the need for involving different occupation groups in planning the new IT systems for community pharmacies. A majority of the international experts shared the vision of community pharmacy adopting a patient care orientation; supported by IT-based documentation, new technological solutions, access to information, and shared patient data. Community pharmacy IT innovations were rare, which is paradoxical because owners and staff pharmacists perception of their innovativeness was seen as being high. Community pharmacy IT systems development processes usually had not undergone systematic needs assessment research beforehand or evaluation after the implementation and were most often coordinated by national governments without subsequent commercialization. Specifically, community pharmacy IT developments lack research, organization, leadership and user involvement in the process. Those responsible for IT development in the community pharmacy sector should create long-term IT development strategies that are in line with community pharmacy service development strategies. This could provide systematic guidance for future projects to ensure that potential innovations are based on a sufficient understanding of pharmacy practice problems that they are intended to solve, and to encourage strong leadership in research, development of innovations so that community pharmacists potential innovativeness is used, and that professional needs and strategic priorities will be considered even if the development process is led by those outside the profession.