Visual search and eye movements: Studies of perceptual span

In visual search one tries to find the currently relevant item among other, irrelevant items. In the present study, visual search performance for complex objects (characters, faces, computer icons and words) was investigated, and the contribution of different stimulus properties, such as luminance contrast between characters and background, set size, stimulus size, colour contrast, spatial frequency, and stimulus layout were investigated. Subjects were required to search for a target object among distracter objects in two-dimensional stimulus arrays. The outcome measure was threshold search time, that is, the presentation duration of the stimulus array required by the subject to find the target with a certain probability. It reflects the time used for visual processing separated from the time used for decision making and manual reactions. The duration of stimulus presentation was controlled by an adaptive staircase method. The number and duration of eye fixations, saccade amplitude, and perceptual span, i.e., the number of items that can be processed during a single fixation, were measured. It was found that search performance was correlated with the number of fixations needed to find the target. Search time and the number of fixations increased with increasing stimulus set size. On the other hand, several complex objects could be processed during a single fixation, i.e., within the perceptual span. Search time and the number of fixations depended on object type as well as luminance contrast. The size of the perceptual span was smaller for more complex objects, and decreased with decreasing luminance contrast within object type, especially for very low contrasts. In addition, the size and shape of perceptual span explained the changes in search performance for different stimulus layouts in word search. Perceptual span was scale invariant for a 16-fold range of stimulus sizes, i.e., the number of items processed during a single fixation was independent of retinal stimulus size or viewing distance. It is suggested that saccadic visual search consists of both serial (eye movements) and parallel (processing within perceptual span) components, and that the size of the perceptual span may explain the effectiveness of saccadic search in different stimulus conditions. Further, low-level visual factors, such as the anatomical structure of the retina, peripheral stimulus visibility and resolution requirements for the identification of different object types are proposed to constrain the size of the perceptual span, and thus, limit visual search performance. Similar methods were used in a clinical study to characterise the visual search performance and eye movements of neurological patients with chronic solvent-induced encephalopathy (CSE). In addition, the data about the effects of different stimulus properties on visual search in normal subjects were presented as simple practical guidelines, so that the limits of human visual perception could be taken into account in the design of user interfaces.

Dessy : desktop search and synchronization

Current smartphones have a storage capacity of several gigabytes. More and more information is stored on mobile devices. To meet the challenge of information organization, we turn to desktop search. Users often possess multiple devices, and synchronize (subsets of) information between them. This makes file synchronization more important. This thesis presents Dessy, a desktop search and synchronization framework for mobile devices. Dessy uses desktop search techniques, such as indexing, query and index term stemming, and search relevance ranking. Dessy finds files by their content, metadata, and context information. For example, PDF files may be found by their author, subject, title, or text. EXIF data of JPEG files may be used in finding them. User–defined tags can be added to files to organize and retrieve them later. Retrieved files are ranked according to their relevance to the search query. The Dessy prototype uses the BM25 ranking function, used widely in information retrieval. Dessy provides an interface for locating files for both users and applications. Dessy is closely integrated with the Syxaw file synchronizer, which provides efficient file and metadata synchronization, optimizing network usage. Dessy supports synchronization of search results, individual files, and directory trees. It allows finding and synchronizing files that reside on remote computers, or the Internet. Dessy is designed to solve the problem of efficient mobile desktop search and synchronization, also supporting remote and Internet search. Remote searches may be carried out offline using a downloaded index, or while connected to the remote machine on a weak network. To secure user data, transmissions between the Dessy client and server are encrypted using symmetric encryption. Symmetric encryption keys are exchanged with RSA key exchange. Dessy emphasizes extensibility. Also the cryptography can be extended. Users may tag their files with context tags and control custom file metadata. Adding new indexed file types, metadata fields, ranking methods, and index types is easy. Finding files is done with virtual directories, which are views into the user’s files, browseable by regular file managers. On mobile devices, the Dessy GUI provides easy access to the search and synchronization system. This thesis includes results of Dessy synchronization and search experiments, including power usage measurements. Finally, Dessy has been designed with mobility and device constraints in mind. It requires only MIDP 2.0 Mobile Java with FileConnection support, and Java 1.5 on desktop machines.

A capability-based view of organisational renewal : Combining opportunity- and advantage-seeking growth in large, established European and North American wood-industry companies

The purpose of this study was to extend understanding of how large firms pursuing sustained and profitable growth manage organisational renewal. A multiple-case study was conducted in 27 North American and European wood-industry companies, of which 11 were chosen for closer study. The study combined the organisational-capabilities approach to strategic management with corporate-entrepreneurship thinking. It charted the further development of an identification and classification system for capabilities comprising three dimensions: (i) the dynamism between firm-specific and industry-significant capabilities, (ii) hierarchies of capabilities and capability portfolios, and (iii) their internal structure. Capability building was analysed in the context of the organisational design, the technological systems and the type of resource-bundling process (creating new vs. entrenching existing capabilities). The thesis describes the current capability portfolios and the organisational changes in the case companies. It also clarifies the mechanisms through which companies can influence the balance between knowledge search and the efficiency of knowledge transfer and integration in their daily business activities, and consequently the diversity of their capability portfolio and the breadth and novelty of their product/service range. The largest wood-industry companies of today must develop a seemingly dual strategic focus: they have to combine leading-edge, innovative solutions with cost-efficient, large-scale production. The use of modern technology in production was no longer a primary source of competitiveness in the case companies, but rather belonged to the portfolio of basic capabilities. Knowledge and information management had become an industry imperative, on a par with cost effectiveness. Yet, during the period of this research, the case companies were better in supporting growth in volume of the existing activity than growth through new economic activities. Customer-driven, incremental innovation was preferred over firm-driven innovation through experimentation. The three main constraints on organisational renewal were the lack of slack resources, the aim for lean, centralised designs, and the inward-bound communication climate.

Comprehensive Two-Dimensional Gas Chromatography: Instrumental and Methodological Development

Comprehensive two-dimensional gas chromatography (GC×GC) offers enhanced separation efficiency, reliability in qualitative and quantitative analysis, capability to detect low quantities, and information on the whole sample and its components. These features are essential in the analysis of complex samples, in which the number of compounds may be large or the analytes of interest are present at trace level. This study involved the development of instrumentation, data analysis programs and methodologies for GC×GC and their application in studies on qualitative and quantitative aspects of GC×GC analysis. Environmental samples were used as model samples. Instrumental development comprised the construction of three versions of a semi-rotating cryogenic modulator in which modulation was based on two-step cryogenic trapping with continuously flowing carbon dioxide as coolant. Two-step trapping was achieved by rotating the nozzle spraying the carbon dioxide with a motor. The fastest rotation and highest modulation frequency were achieved with a permanent magnetic motor, and modulation was most accurate when the motor was controlled with a microcontroller containing a quartz crystal. Heated wire resistors were unnecessary for the desorption step when liquid carbon dioxide was used as coolant. With use of the modulators developed in this study, the narrowest peaks were 75 ms at base. Three data analysis programs were developed allowing basic, comparison and identification operations. Basic operations enabled the visualisation of two-dimensional plots and the determination of retention times, peak heights and volumes. The overlaying feature in the comparison program allowed easy comparison of 2D plots. An automated identification procedure based on mass spectra and retention parameters allowed the qualitative analysis of data obtained by GC×GC and time-of-flight mass spectrometry. In the methodological development, sample preparation (extraction and clean-up) and GC×GC methods were developed for the analysis of atmospheric aerosol and sediment samples. Dynamic sonication assisted extraction was well suited for atmospheric aerosols collected on a filter. A clean-up procedure utilising normal phase liquid chromatography with ultra violet detection worked well in the removal of aliphatic hydrocarbons from a sediment extract. GC×GC with flame ionisation detection or quadrupole mass spectrometry provided good reliability in the qualitative analysis of target analytes. However, GC×GC with time-of-flight mass spectrometry was needed in the analysis of unknowns. The automated identification procedure that was developed was efficient in the analysis of large data files, but manual search and analyst knowledge are invaluable as well. Quantitative analysis was examined in terms of calibration procedures and the effect of matrix compounds on GC×GC separation. In addition to calibration in GC×GC with summed peak areas or peak volumes, simplified area calibration based on normal GC signal can be used to quantify compounds in samples analysed by GC×GC so long as certain qualitative and quantitative prerequisites are met. In a study of the effect of matrix compounds on GC×GC separation, it was shown that quality of the separation of PAHs is not significantly disturbed by the amount of matrix and quantitativeness suffers only slightly in the presence of matrix and when the amount of target compounds is low. The benefits of GC×GC in the analysis of complex samples easily overcome some minor drawbacks of the technique. The developed instrumentation and methodologies performed well for environmental samples, but they could also be applied for other complex samples.

Physical properties of meteorites and their role in planetology

Together with cosmic spherules, interplanetary dust particles and lunar samples returned by Apollo and Luna missions, meteorites are the only source of extraterrestrial material on Earth. The physical properties of meteorites, especially their magnetic susceptibility, bulk and grain density, porosity and paleomagnetic information, have wide applications in planetary research and can reveal information about origin and internal structure of asteroids. Thus, an expanded database of meteorite physical properties was compiled with new measurements done in meteorite collections across Europe using a mobile laboratory facility. However, the scale problem may bring discrepancies in the comparison of asteroid and meteorite properties. Due to inhomogenity, the physical properties of meteorites studied on a centimeter or millimeter scale may differ from those of asteroids determined on kilometer scales. Further difference may arise from shock effects, space and terrestrial weathering and from difference in material properties at various temperatures. Close attention was given to the reliability of the paleomagnetic and paleointensity information in meteorites and the methodology to test for magnetic overprints was prepared and verified.

A Formalised Model of the Information and Materials Handling Activities in the Construction Process

A model of the information and material activities that comprise the overall construction process is presented, using the SADT activity modelling methodology. The basic model is further refined into a number of generic information handling activities such as creation of new information, information search and retrieval, information distribution and person-to-person communication. The viewpoint could be described as information logistics. This model is then combined with a more traditional building process model, consisting of phases such as design and construction. The resulting two-dimensional matrix can be used for positioning different types of generic IT-tools or construction specific applications. The model can thus provide a starting point for a discussion of the application of information and communication technology in construction and for measurements of the impacts of IT on the overall process and its related costs.

Avoimet julkaisuarkistot ja niiden tekniikka

Open Access -liike pyrkii vapauttamaan tieteellisen tiedon kaupallisuuden rajoitteista edesauttamalla artikkeleiden rinnakkaisversioiden avointa ja esteetöntä verkkotallennusta. Sen mahdollistamiseksi verkkoon perustetaan julkaisuarkistoja, joiden toiminta-ajatuksena on säilöä taustayhteisönsä tieteellinen tuotanto avoimesti ja keskitetysti yhteen paikkaan. Avoimen lähdekoodin arkistosovellukset jakavat sisältönsä OAI-protokollan avulla ja muodostavat näin globaalin virtuaalisen tietoverkon. Suurten tietomäärien käsittelyssä on huomioitava erityisesti kuvailutiedon rooli tehokkaiden hakujen toteuttamisessa sekä tiedon yksilöiminen verkossa erilaisten pysyvien tunnisteiden, kuten Handle:n tai URN:n avulla. Tieteellisen tiedon avoimella saatavuudella on merkittävä vaikutus myös oppimisen näkökulmasta. Julkaisuarkistot tarjoavat oppimateriaalin lisäksi uusia mahdollisuuksia julkaisukanavan ja oppimisymp äristön integroimiseen. Työssä esitellään avoimen saatavuuden keskeisiä teemoja sekä sen käytännön toteutusta varten kehitettyjä teknisiä ratkaisuja. Näiden pohjalta toteutetaan Meilahden kampuksen avoin julkaisuarkisto. Työssä pohditaan myös julkaisuarkistojen soveltuvuutta oppimisprosessin tukemiseen tutkivan- ja sulautuvan oppimisen viitekehyksessä. ACM Computing Classification System (CCS): H.3 [INFORMATION STORAGE AND RETRIEVAL], H.3.7 [Digital Libraries], H.3.3 [Information Search and Retrieval], H.3.5 [Online Information Services], K.3 [COMPUTERS AND EDUCATION], K.3.1 [Computer Uses in Education]

Uutta, vanhaa ja lainattua : Tampereen Kaupunkilähetyksen kristillissosiaalisen työn asemoituminen hyvinvointivaltion rakentumisessa vuosina 1939−1973

The main purpose of this study was to provide a full account of the Christian social work carried out at the Tampere City Mission (TCM) as well as the Missions sphere of operations from the Second World War to the early 1970s, comprising a period of significant change. The study consists of charting the processes of change and connections within the activities of the TCM and how examining these were linked to the general tendencies of the period, in lay work, social work, professionalization and the representation of gender. The positioning of the activities is described on the basis of these tendencies. The main sources for the study were the archives of the Mission, for example the minutes of meetings, correspondences as well as annual reports, and the archives of its partners, such as the City of Tampere, the Evangelical Lutheran parishes of Tampere and the State Welfare Administration. The archives of the Helsinki, Turku and Stockholm Missions supplied comparison reference and other material. In particular, social welfare and Christian social work technical journals of were used as printed sources. The principal method used was the genetic method of historiology. The research subject was also evaluated from the point of view of third sector research in addition to that of professionalization studies and gender studies. By the beginning of the research period, the TCM had turned more and more dedicatedly into a multipurpose social service organization maintaining social services such as old people s homes and children´s homes. This development continued, even though new areas of activity emerged and older ones fell into disuse. Social innovations sprang up, marriage counseling being one of them. On the national level, the TCM pioneered the provision of sheltered industrial work for intellectually disabled persons as well as housing services for them. As new activities were initiated, they overlapped with the established ones, and the TCM handed some of its child protection functions over to the municipality, in accordance with the current adaptation theory. The use of its own property to produce ever-changing social services may be the reason why the association s work continued on with vitality. Functional networks and political aid in the field of social services also bolstered the association. As in other Nordic countries, nonprofit organizations served as partners rather than competitors, with the State establishing institutional welfare arrangements. In the 1960s the municipal takeover of social services impacted the TCM activities. Rules for government subsidies and municipal allowances were not well established; hence these funds were not easily available, making improvements difficult. The TCM was a community in which women had a relatively strong position and an opportunity to make a difference. Female staff were reasonably equal to men, and women worked as heads of a several institutions. Care work employed a number of men, which went against the traditional segregation of labour between the sexes. The TCM s operations were from early on very professionalized, and were developed with particular care. Keywords: Christian social work, third sector, professionalization, gender