Atomic Layer Deposition of Electroluminescent ZnS, SrS, and BaS Thin Films

The light emitted by flat panel displays (FPD) can be generated in many different ways, such as for example alternating current thin film electroluminescence (ACTFEL), liquid crystal display (LCD), light emitting diode (LED), or plasma display panel (PDP) technologies. In this work, the focus was on ACTFEL devices and the goal was to develop new thin film processes for light emitting materials in ACTFEL devices. The films were deposited with the atomic layer deposition (ALD) method, which has been utilized in the manufacturing of ACTFEL displays since the mid-1980s. The ALD method is based on surface-controlled self-terminated reactions and a maximum of one layer of the desired material can be prepared during one deposition cycle. Therefore, the film thickness can be controlled simply by adjusting the number of deposition cycles. In addition, both large areas and deep trench structures can be covered uniformly. During this work, new ALD processes were developed for the following thin film materials: BaS, CuxS, MnS, PbS, SrS, SrSe, SrTe, SrS1-xSex, ZnS, and ZnS1-xSex. In addition, several ACTFEL devices were prepared where the light emitting material was BaS, SrS, SrS1-xSex, ZnS, or ZnS1-xSex thin film that was doped with Ce, Cu, Eu, Mn, or Pb. The sulfoselenide films were made by substituting the elemental selenium for sulfur on the substrate surface during film deposition. In this way, it was possible to replace a maximum of 90% of the sulfur with selenium, and the XRD analyses indicated that the films were solid solutions. The polycrystalline BaS, SrS, and ZnS thin films were deposited at 180-400, 120-460, and 280-500 °C, respectively, and the processes had a wide temperature range where the growth rate of the films was independent of the deposition temperature. The electroluminescence studies showed that the doped sulfoselenide films resulted in low emission intensity. However, the emission intensities and emission colors of the doped SrS, BaS, and ZnS films were comparable with those found in earlier studies. It was also shown that the electro-optical properties of the different ZnS:Mn devices were different as a consequence of different ZnS:Mn processes. Finally, it was concluded that because the higher deposition temperature seemed to result in a higher emission intensity, the thermal stability of the reactants has a significant role when the light emitting materials of ACTFEL devices are deposited with the ALD method.

Anthraquinones from the Fungus Dermocybe sanguinea as Textile Dyes

This study is based on the multidiciplinary approach of using natural colorants as textile dyes. The author was interested in both the historical and traditional aspects of natural dyeing as well as the modern industrial applications of the pure natural compounds. In the study, the anthraquinone compounds were isolated as aglycones from the ectomycorrhizal fungus Dermocybe sanguinea. The endogenous beta-glucosidase of the fungus was used to catalyse the hydrolysis of the O-glycosyl linkage in emodin- and dermocybin-1-beta-D-glucopyranosides. The method, in which 10.45 kg of fresh fungi was starting material, yielded two fractions: 56.0 g of Fraction 1 (94% of the total amount of pigment,) consisting almost exclusively of the main pigments emodin and dermocybin, and 3.3 g of Fraction 2 (6%) consisting mainly of the anthraquinone carboxylic acids. The anthraquinone compounds in Fractions 1 and 2 were separated by one- and two-dimensional thin-layer-chromatography (TLC) using silica plates. 1D TLC showed that neither an acidic nor a basic solvent system alone separated completely all the anthraquinones isolated from D. sanguinea, in spite of the variation of the rations of the solvent components in the systems. Thus, a new 2D TLC technique was developed, applying n-pentanol-pyridine-methanol (6:4:3, v/v/v) and toluene-ethyl acetate-ethanol-formic acid (10:8:1:2, v/v/v/v) as eluents. Fifteen different anthraquinone derivatives were completely separated from one another. Emodin, physcion, endocrocin, dermolutein, dermorubin, 5-chlorodermorubin, emodin-1-beta-D-glucopyranoside, dermocybin-1-beta-D-glucopyranoside and dermocybin, and five new compounds, not earlier identified in D. sanguinea, 7-chloroemodin, 5,7-dichloroemodin, 5,7-dichloroendocrocin, 4-hydroxyaustrocorticone and austrocorticone, were separated and identified on the basis of their Rf-values, UV/Vis spectra and mass spectra. One substance remained unidentified, because of its very low concentration. The anthraquinones in Fractions 1 and 2 were preparatively separeted by liquid-liquid partition, with isopropylmethyl ketone and aqueous phosphate buffer as the solvent system. Advantage was taken of the principle of stepwise pH-gradient elution. The multiple liquid-liquid partition (MLLP) offered an excellent method for the preparative separation of compounds, which contain acidic groups such as the phenolic OH and COOH groups. Due to their strong aggregation properties, these compounds are, without derivatization, very difficult to separate on a preparative scale by chromatographic methods. By the MLLP method remarkable separations were achieved for the components in each mixture. Emodin and dermocybin were both obtained from Fraction 1 in a purity of at least 99%. Pure emodin and dermocybin were applied as mordant dyes to wool and polyamide and as disperse dyes to polyester and polyamide, using the high temperature (HT) technique. A mixture of dermorubin and 5-chlorodermorubin was applied as an acid dye to wool. In these experiments, synthetic dyes were used as references. Experiments were also performed using water extract of the air-dried fungi as dye liquor for wool and silk. The main colouring compounds in the crude water extract were emodin and dermocybin, which indicated that the O-glycosyl linkages in emodin- and dermocybin-1-beta-D-glucopyranosides were broken by the beta-glucosidase enzyme. Apparently, the hydrolysis occurred during the drying of the fungi and during the soaking of the dried fruit bodies overnight when preparing the dyebath. The colour of each dyed material was investigated in terms of the CIELAB L*, a* and b* values, and the colour fastness to light, washing and rubbing was tested according to the ISO standards. In the mordant dyeing experiments, emodin dyed wool and polyamide yellow and red, depending on the pH of the dyebath. Dermocybin gave purple and violet colours. The colour fastness of the mordant-dyed fabrics varied from good to moderate. The fastness properties of the natural anthraquinone carboxylic acids on wool were good, indicating the strength of the ionic bonds between the COO- groups of the dyes and the NH3+ groups of the fibres. In the disperse dyeing experiments, emodin dyed polyester bright yellow and dermocybin bright reddish-orange, and the fabrics showed excellent colour fastness. In contrast, emodin and dermocybin successfully dyed polyamide brownish-orange and wine-red, respectively, but with only moderate fastness. In industrial dyeing processes, natural anthraquinone aglycone mixtures dyed wool and silk well even at low concentrations of mordants, i.e. with 10% of the weight of the fibre (owf) of KAl(SO4)2 and 1 or 0.5% owf of other mordants. This study showed that purified natural anthraquinone compounds can produce bright hues with good colour-fastness properties in different textile materials. Natural anthraquinones have a significant potential for new dyeing techniques and will provide useful alternatives to synthetic dyes.

Preparation, structural analysis and prebiotic potential of arabinoxylo-oligosaccharides

Arabinoxylo-oligosaccharides (AXOS) can be prepared enzymatically from arabinoxylans (AX) and AXOS are known to possess prebiotic potential. Here the structural features of 10 cereal AX were examined. AX were hydrolysed by Shearzyme® to prepare AXOS, and their structures were fully analysed. The prebiotic potential of the purified AXOS was studied in the fermentation experiments with bifidobacteria and faecal microbiota. In AX extracted from flours and bran, high amounts of a-L-Araf units are attached to the b-D-Xylp main chain, whereas moderate or low degree of substitution was found from husks, cob and straw. Nuclear magnetic resonance (NMR) spectroscopy showed that flour and bran AX contain high amounts of a-L-Araf units bound to the O-3 of b-D-Xylp residues and doubly substituted b-D-Xylp units with a-L-Araf substituents at O-2 and O-3. Barley husk and corn cob AX contain high amounts of b-D-Xylp(1→2)-a-L-Araf(1→3) side chains, which can also be found in AX from oat spelts and rice husks, and in lesser amounts in wheat straw AX. Rye and wheat flour AX and oat spelt AX were hydrolysed by Shearzyme® (with Aspergillus aculeatus GH10 endo-1,4-b-D-xylanase as the main enzyme) for the production of AXOS on a milligram scale. The AXOS were purified and their structures fully analysed, using mass spectrometry (MS) and 1D and 2D NMR spectroscopy. Monosubstituted xylobiose and xylotriose with a-L-Araf attached to the O-3 or O-2 of the nonreducing end b-D-Xylp unit and disubstituted AXOS with two a-L-Araf units at the nonreducing end b-D-Xylp unit of xylobiose or xylotriose were produced. Xylobiose with b-D-Xylp(1→2)-a-L-Araf(1→3) side chain was also purified. These AXOS were used as standards in further identification and quantification of corresponding AXOS from the hydrolysates in high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD) analysis. The prebiotic potential of AXOS was tested in in vitro fermentation experiments. Bifidobacterium adolescentis ATCC 15703 and B. longum ATCC 15707 utilized AXOS from the AX hydrolysates. Both species released L-arabinose from AXOS, but B. adolescentis consumed the XOS formed, whereas B. longum fermented the L-arabinose released. The third species tested, B. breve ATCC 15700, grew poorly on these substrates. When cultivated on pure AXOS, the bifidobacterial mixture utilized pure singly substituted AXOS almost completely, but no growth was detected with pure doubly substituted AXOS as substrates. However, doubly substituted AXOS were utilized from the mixture of xylose, XOS and AXOS. Faecal microbiota utilized both pure singly and doubly substituted AXOS. Thus, a mixture of singly and doubly substituted AXOS could function as a suitable, slowly fermenting prebiotic substance. This thesis contributes to the structural information on cereal AX and preparation of mono and doubly substituted AXOS from AX. Understanding the utilization strategies is fundamental in evaluating the prebiotic potential of AXOS. Further research is still required before AXOS can be used in applications for human consumption.

Suomessa esiintyvien lämpötilan ääriarvojen mallintaminen yksidimensioisilla ilmakehämalleilla

Tässä Pro Gradu -tutkielmassa oli tarkoitus määrittää ne lämpötilan ääriarvojen maksimi ja minimi arvot, jotka ovat vielä fysikaalisesti mahdollisia Suomen ilmastossa. Työssä käytettiin hyväksi kahta eri yksidimensioista ilmakehämallia, 1D-H634 sekä 1D-RCA3. Ensiksi mainittu pohjaa HIRLAM 6.3.4- malliin. Jälkimmäisessä mallissa HIRLAMin pintaprosessit on korvattu ruotsalaisen Rossby-keskuksen RCA3 -mallin fysiikalla. Tutkimukseen otettiin mukaan kaikki kolme luotausasemaa Suomesta (Jokioinen, Jyväskylä ja Sodankylä). Työ aloitettiin poimimalla Ilmatieteen laitoksen ilmastotietokannasta ne ajankohdat, joina kahden metrin lämpötila on ylittänyt kesällä +30°C ja alittanut talvella -35°C. Seuraavaksi etsittiin näitä ajanjaksoja vastaavat luotaustiedot. Luotauksia tutkimalla pyrittiin selvittämään mitkä tekijät vaikuttivat äärilämpötilojen esiintymiseen. Tämän jälkeen nämä luotaustiedot interpoloitiin vastaamaan mallin 40 vertikaalitasoa. Nämä tiedot syötettiin malleille yhdessä päivämäärän, kellonajan sekä koordinaattien kanssa ja tulokseksi saatiin vuorokauden kahden metrin lämpötilakäyrät. Koska yksidimensioiset mallit eivät ota huomioon lämmön advektiota, laskettiin Euroopan keskipitkien sääennusteiden keskuksen (ECMWF) ERA40-uusanalyysien pohjalta kyseisiä ajanhetkiä vastaavat lämmön advektiot. Lisäksi laskettiin keskimääräiset advektion vuorokausirytmit kesällä (kesä-heinä-elo) ja talvella (tammi-helmi). Suomesta saatujen luotaustietojen pohjalta tehtyjen ajojen kahden metrin lämpötilat eivät kesätilanteessa kyenneet ylittämään Turussa vuonna 1914 mitattua lämpötilaennätystä +35,9°C. Verrattaessa kuitenkin malliajojen tuloksia tehtyihin havaintoihin, voitiin kesätilanteissa todeta mallin antavan jopa 5°C lämpimämpiä arvoja kuin kyseisissä tilanteissa on mitattu. Lopuksi päätettiin tehdä malliajo, jossa luotaus otettiin Tallinnan lentoasemalta elokuulta 1992. Tämän luotaustiedon pohjalta tehdyn ajon tulos (+36,4°C) ylitti Suomessa havaitun lämpötilaennätyksen. Talvitilanteissa 1D-H634-malli ei puolestaan kyennyt saavuttamaan Suomen pakkasennätystä (-51,5°C), joka mitattiin Kittilässä vuonna 1999. Mallitetut pakkaslukemat olivat kuitenkin suurimmassa osassa ajoja kireämpiä kuin mitä kyseisten tilanteiden havainnot kertovat. Käytettäessä 1D-RCA3-mallia päästiin pakkasissa -53,8°C:seen ja pakkaslukemat olivat muutenkin paljon alhaisempia verrattuna 1D-H634- mallin tuloksiin.

Viljan visar vägen till identiteten : Berättelsetyper och teman i livsberättelser av kvinnliga teologer i Svenskfinland

Forskningens utgångspunkt var att tillföra information om kvinnliga teologers liv i Svenskfinland under en period då kyrkan hade omdefinierat sin syn på kvinnor som präster. Till forskningens intresseområden hörde frågan om hur situationen hade påverkat kvinnors motivation att välja teologiska studier och yrken samt hur situationen hade inverkat på kvinnliga teologer i arbetslivet. Forskningens uppgift är att ur ett identitetsperspektiv undersöka målgruppens egna skildringar av livet som kvinnlig teolog i Svenskfinland. Forskningsfrågan delades in i två delfrågor: 1)Hur har kvinnliga teologer kommit att välja studier, yrken och arbetsplats? 2)Vad har kvinnliga teologer upplevt i sina studier och arbetsliv? Forskningens material samlades in hösten 2003 genom en förfrågan per brev och genom en tidningsnotis i tidningen Kyrkpressen. Materialet bestod av livsberättelser som kvinnliga teologer i olika yrkesgrupper hade skrivit utgående ifrån rubriken ”Mitt liv som kvinnlig teolog i Svenskfinland”. Cirka 250 kvinnor hade avlagt teologisk examen på svenska i Finland. Antalet personer som deltog i undersökningen med sin livsberättelse var 27. Materialet analyserades kvalitativt och induktivt med en narrativ analys som tog fasta på teman och berättelsetyper i olika livsskeden: val av studier, studietid, val av karriär och erfarenheter från arbetslivet. Analysresultatet var att studievalets beskrivning kunde tolkas som en valsituation där egenskaper jämfördes med yrkesrollen, som en socialisationsprocess, som ett alternativ till tidigare studieinriktning eller som en process där kvinnoprästdiskussioner, intresse för teologi och teologuppgifter fick informanten att välja teologin. Teman från studietiden handlade om studiers fördröjning, om yrkesinriktning, om studier som förberedelse för arbetslivet och om kvinnoprästdiskussionens inverkan på yrkesinriktningen. Val av arbetsplatser och yrken beskrevs utgående ifrån kvinnliga teologers förändrade position, moderskapets inverkan på karriären, en strävan att hitta en arbetsplats som passade informanten, erfarenheter från en enda arbetsplats och karriärsbyte. Lektorer tog fasta på välsignelseaktens betydelse, kyrkoherdens stora inflytande på arbetets karaktär samt hur situationen förändrades då kvinnor tilläts bli präster. För en del präster innebar prästrollen att andra människor betonade att de var kvinnor. Några informanter hade behov av stöd både från Borgå stifts ledning och från andra kvinnliga präster under den första tiden med kvinnliga präster. Till en början upplevdes ledningens stöd inte alltid som tillräckligt men det förbättrades med tiden. Informanterna berättade inte så mycket om läraryrket. Inom forskning verkade teologtiteln vara naturlig, medan informanter med erfarenhet av annat än teologyrken ibland hade stött på reaktioner på sitt yrkesval eller sin arbetsroll. Finlandssvenskheten upplevdes av olika informanter både som tryggt och inskränkt. Eventuella kontakter till finska stift upplevdes positivt även om det egna sammanhanget upplevdes som viktigt. Trivsel på arbetsplatsen orsakades av subjektiva belöningar och i en del fall av att arbetet motsvarade informantens yrkesinriktning. Att vara kvinnlig teolog innebar ibland att informantens yrkesval tolkades av andra som ett ställningstagande för någon ideologi i kvinnoprästfrågan.

Preoperative visual acuity of cataract patients. Repeatability of visual acuity and refractive error measurements in clinical settings

Visual acuities at the time of referral and on the day before surgery were compared in 124 patients operated on for cataract in Vaasa Central Hospital, Finland. Preoperative visual acuity and the occurrence of ocular and general disease were compared in samples of consecutive cataract extractions performed in 1982, 1985, 1990, 1995 and 2000 in two hospitals in the Vaasa region in Finland. The repeatability and standard deviation of random measurement error in visual acuity and refractive error determination in a clinical environment in cataractous, pseudophakic and healthy eyes were estimated by re-examining visual acuity and refractive error of patients referred to cataract surgery or consultation by ophthalmic professionals. Altogether 99 eyes of 99 persons (41 cataractous, 36 pseudophakic and 22 healthy eyes) with a visual acuity range of Snellen 0.3 to 1.3 (0.52 to -0.11 logMAR) were examined. During an average waiting time of 13 months, visual acuity in the study eye decreased from 0.68 logMAR to 0.96 logMAR (from 0.2 to 0.1 in Snellen decimal values). The average decrease in vision was 0.27 logMAR per year. In the fastest quartile, visual acuity change per year was 0.75 logMAR, and in the second fastest 0.29 logMAR, the third and fourth quartiles were virtually unaffected. From 1982 to 2000, the incidence of cataract surgery increased from 1.0 to 7.2 operations per 1000 inhabitants per year in the Vaasa region. The average preoperative visual acuity in the operated eye increased by 0.85 logMAR (in decimal values from 0.03to 0.2) and in the better eye 0.27 logMAR (in decimal values from 0.23 to 0.43) over this period. The proportion of patients profoundly visually handicapped (VA in the better eye <0.1) before the operation fell from 15% to 4%, and that of patients less profoundly visually handicapped (VA in the better eye 0.1 to <0.3) from 47% to 15%. The repeatability visual acuity measurement estimated as a coefficient of repeatability for all 99 eyes was ±0.18 logMAR, and the standard deviation of measurement error was 0.06 logMAR. Eyes with the lowest visual acuity (0.3-0.45) had the largest variability, the coefficient of repeatability values being ±0.24 logMAR and eyes with a visual acuity of 0.7 or better had the smallest, ±0.12 logMAR. The repeatability of refractive error measurement was studied in the same patient material as the repeatability of visual acuity. Differences between measurements 1 and 2 were calculated as three-dimensional vector values and spherical equivalents and expressed by coefficients of repeatability. Coefficients of repeatability for all eyes for vertical, torsional and horisontal vectors were ±0.74D, ±0.34D and ±0.93D, respectively, and for spherical equivalent for all eyes ±0.74D. Eyes with lower visual acuity (0.3-0.45) had larger variability in vector and spherical equivalent values (±1.14), but the difference between visual acuity groups was not statistically significant. The difference in the mean defocus equivalent between measurements 1 and 2 was, however, significantly greater in the lower visual acuity group. If a change of ±0.5D (measured in defocus equivalents) is accepted as a basis for change of spectacles for eyes with good vision, the basis for eyes in the visual acuity range of 0.3 - 0.65 would be ±1D. Differences in repeated visual acuity measurements are partly explained by errors in refractive error measurements.

Theoretical modeling of ionospheric electrodynamics including induction effects

This thesis deals with theoretical modeling of the electrodynamics of auroral ionospheres. In the five research articles forming the main part of the thesis we have concentrated on two main themes: Development of new data-analysis techniques and study of inductive phenomena in the ionospheric electrodynamics. The introductory part of the thesis provides a background for these new results and places them in the wider context of ionospheric research. In this thesis we have developed a new tool (called 1D SECS) for analysing ground based magnetic measurements from a 1-dimensional magnetometer chain (usually aligned in the North-South direction) and a new method for obtaining ionospheric electric field from combined ground based magnetic measurements and estimated ionospheric electric conductance. Both these methods are based on earlier work, but contain important new features: 1D SECS respects the spherical geometry of large scale ionospheric electrojet systems and due to an innovative way of implementing boundary conditions the new method for obtaining electric fields can be applied also at local scale studies. These new calculation methods have been tested using both simulated and real data. The tests indicate that the new methods are more reliable than the previous techniques. Inductive phenomena are intimately related to temporal changes in electric currents. As the large scale ionospheric current systems change relatively slowly, in time scales of several minutes or hours, inductive effects are usually assumed to be negligible. However, during the past ten years, it has been realised that induction can play an important part in some ionospheric phenomena. In this thesis we have studied the role of inductive electric fields and currents in ionospheric electrodynamics. We have formulated the induction problem so that only ionospheric electric parameters are used in the calculations. This is in contrast to previous studies, which require knowledge of the magnetospheric-ionosphere coupling. We have applied our technique to several realistic models of typical auroral phenomena. The results indicate that inductive electric fields and currents are locally important during the most dynamical phenomena (like the westward travelling surge, WTS). In these situations induction may locally contribute up to 20-30% of the total ionospheric electric field and currents. Inductive phenomena do also change the field-aligned currents flowing between the ionosphere and magnetosphere, thus modifying the coupling between the two regions.