Relationship Drivers in Provider - Consumer Relationships. Empirical Studies of Customer Loyalty Programs (första upplagan slutsåld / first edition sold out, 'print on demand' 60 €)

The study addressed a phenomenon that has become common marketing practice, customer loyalty programs. Although a common type of consumer relationship, there is limited knowledge of its nature. The purpose of the study was to create structured understanding of the nature of customer relationships from both the provider’s and the consumer’s viewpoints by studying relationship drivers and proposing the concept of relational motivation as a provider of a common framework for the analysis of these views. The theoretical exploration focused on reasons for engaging in customer relationships for both the consumer and the provider. The themes of buying behaviour, industrial and network marketing and relationship marketing, as well as the concepts of a customer relationship, customer loyalty, relationship conditions, relational benefits, bonds and commitment were explored and combined in a new way. Concepts from the study of business-to-business relationships were brought over and their power in explaining the nature of consumer relationships examined. The study provided a comprehensive picture of loyalty programs, which is an important contribution to the academic as well as the managerial discussions. The consumer study provided deep insights into the nature of customer relationships. The study provides a new frame of reference to support the existing concepts of loyalty and commitment with the introduction of the relationship driver and relational motivation concepts. The result is a novel view of the nature of customer relationships that creates new understanding of the forces leading to loyal behaviour and commitment. The study concludes with managerial implications.

Understanding Customer Loyalty and Disloyalty The Effect of Loyalty-Supporting and -Repressing Factors (first edition sold out, 'print on demand' 60 €)

Customer loyalty has been a central topic of both marketing theory and practice for several decades. Customer disloyalty, or relationship ending, has received much less attention. Despite the close relation between customer loyalty and disloyalty, they have rarely been addressed in the same study. The thesis bridges this gap by focusing on both loyal and disloyal customers and the factors characterising them. Based on a qualitative study of loyal and disloyal bank customers in the Finnish retail banking market, both factors that are common to the groups and factors that differentiate between them are identified. A conceptual framework of factors that affect customer loyalty or disloyalty is developed and used to analyse the empirical data. According to the framework, customers’ loyalty status (behavioural and attitudinal loyalty) is influenced by positive, loyalty-supporting, and negative, loyalty-repressing factors. Loyalty-supporting factors either promote customer dedication, making the customer want to remain loyal, or act as constraints, hindering the customer from switching. Among the loyalty-repressing factors it is especially important to identify those that act as triggers of disloyal behaviour, making customers switch service providers. The framework further suggests that by identifying the sources of loyalty-supporting and -repressing factors (the environment, the provider, the customer, the provider-customer interaction, or the core service) one can determine which factors are within the control of the service provider. Attitudinal loyalty is approached through a customer’s “feeling of loyalty”, as described by customers both orally and graphically. By combining the graphs with behavioural loyalty, seven customer groups are identified: Stable Loyals, Rescued Loyals, Loyals at Risk, Positive Disloyals, Healing Disloyals, Fading Disloyals, and Abrupt Disloyals. The framework and models of the thesis can be used to analyse factors that affect customer loyalty and disloyalty in different service contexts. Since the empirical study was carried out in a retail bank setting, the thesis has managerial relevance especially for banks. Christina Nordman is associated with CERS, Center for Relationship Marketing and Service Management at the Swedish School of Economics and Business Administration. The doctoral thesis is part of the Göran Collert Research Project in Customer Relationships and Retail Banking and has been funded by The Göran Collert Foundation.

Essays on socially optimal phosphorus policies in crop production

Phosphorus is a nutrient needed in crop production. While boosting crop yields it may also accelerate eutrophication in the surface waters receiving the phosphorus runoff. The privately optimal level of phosphorus use is determined by the input and output prices, and the crop response to phosphorus. Socially optimal use also takes into account the impact of phosphorus runoff on water quality. Increased eutrophication decreases the economic value of surface waters by Deteriorating fish stocks, curtailing the potential for recreational activities and by increasing the probabilities of mass algae blooms. In this dissertation, the optimal use of phosphorus is modelled as a dynamic optimization problem. The potentially plant available phosphorus accumulated in soil is treated as a dynamic state variable, the control variable being the annual phosphorus fertilization. For crop response to phosphorus, the state variable is more important than the annual fertilization. The level of this state variable is also a key determinant of the runoff of dissolved, reactive phosphorus. Also the loss of particulate phosphorus due to erosion is considered in the thesis, as well as its mitigation by constructing vegetative buffers. The dynamic model is applied for crop production on clay soils. At the steady state, the analysis focuses on the effects of prices, damage parameterization, discount rate and soil phosphorus carryover capacity on optimal steady state phosphorus use. The economic instruments needed to sustain the social optimum are also analyzed. According to the results the economic incentives should be conditioned on soil phosphorus values directly, rather than on annual phosphorus applications. The results also emphasize the substantial effects the differences in varying discount rates of the farmer and the social planner have on optimal instruments. The thesis analyzes the optimal soil phosphorus paths from its alternative initial levels. It also examines how erosion susceptibility of a parcel affects these optimal paths. The results underline the significance of the prevailing soil phosphorus status on optimal fertilization levels. With very high initial soil phosphorus levels, both the privately and socially optimal phosphorus application levels are close to zero as the state variable is driven towards its steady state. The soil phosphorus processes are slow. Therefore, depleting high phosphorus soils may take decades. The thesis also presents a methodologically interesting phenomenon in problems of maximizing the flow of discounted payoffs. When both the benefits and damages are related to the same state variable, the steady state solution may have an interesting property, under very general conditions: The tail of the payoffs of the privately optimal path as well as the steady state may provide a higher social welfare than the respective tail of the socially optimal path. The result is formalized and an applied to the created framework of optimal phosphorus use.

Intensity, productivity and efficiency in agriculture in Finland and implications for N and P fertiliser management

The purpose of this study was to evaluate intensity, productivity and efficiency in agriculture in Finland and show implications for N and P fertiliser management. Environmental concerns relating to agricultural production have been and still are focused on arguments about policies that affect agriculture. These policies constrain production while demand for agricultural products such as food, fibre and energy continuously increase. Therefore the importance of increasing productivity is a great challenge to agriculture. Over the last decades producers have experienced several large changes in the production environment such as the policy reform when Finland joined the EU 1995. Other and market changes occurred with the further EU enlargement with neighbouring countries in 2005 and with the decoupling of supports over the 2006-2007 period. Decreasing prices a decreased number of farmers and decreased profitability in agricultural production have resulted from these changes and constraints and of technological development. It is known that the accession to the EU 1995 would herald changes in agriculture. Especially of interest was how the sudden changes in prices of commodities on especially those of cereals, decreased by 60%, would influence agricultural production. The knowledge of properties of the production function increased in importance as a consequence of price changes. A research on the economic instruments to regulate productions was carried out and combined with earlier studies in paper V. In paper I the objective was to compare two different technologies, the conventional farming and the organic farming, determine differences in productivity and technical efficiency. In addition input specific or environmental efficiencies were analysed. The heterogeneity of agricultural soils and its implications were analysed in article II. In study III the determinants of technical inefficiency were analysed. The aspects and possible effects of the instability in policies due to a partial decoupling of production factors and products were studied in paper IV. Consequently connection between technical efficiency based on the turnover and the sales return was analysed in this study. Simple economic instruments such as fertiliser taxes have a direct effect on fertiliser consumption and indirectly increase the value of organic fertilisers. However, fertiliser taxes, do not fully address the N and P management problems adequately and are therefore not suitable for nutrient management improvements in general. Productivity of organic farms is lower on average than conventional farms and the difference increases when looking at selling returns only. The organic sector needs more research and development on productivity. Livestock density in organic farming increases productivity, however, there is an upper limit to livestock densities on organic farms and therefore nutrient on organic farms are also limited. Soil factors affects phosphorous and nitrogen efficiency. Soils like sand and silt have lower input specific overall efficiency for nutrients N and P. Special attention is needed for the management on these soils. Clay soils and soils with moderate clay content have higher efficiency. Soil heterogeneity is cause for an unavoidable inefficiency in agriculture.

Liikennepolttoaineeksi tarkoitettu ohraetanoli, Suomen ohramarkkinat ja ilmastonmuutos

The aim of the thesis was to analyze the use of barley as an input for bioethanol production and the impacts the use has on the Finnish barley markets. Two main research questions were formulated. First, privately and socially optimal bioethanol production levels were examined. In the social optimum, the climate benefits of bioethanol production were considered. It was calculated that the production and use of bioethanol created smaller CO2 -emissions when compared with the production and use of gasoline. Second, the impacts of bioethanol production on farmland allocation and agricultural production were analyzed. In more detail, the second aim was to analyze the farmland allocation between wheat and barley cultivation and green set aside in the private and social optimum. An analytical model was produced to analyze the barley markets in Finland. To provide an empirical counterpart to this model, existing research data on bioethanol production and barley cultivation was used. The aim of the model was to analyze the supply and the demand as well as market equilibrium of barley. Furthermore, the model provided a framework for analyzing the differences between the private optimum and social optimum of bioethanol production in Finland. The demand for barley consists of animal feed demand and bioethanol demand. On the supply side, a heterogeneous model of farmland quality was used. With this framework, it is possible to analyze farmland allocation between barley and wheat cultivation and green set aside and how the climate benefits of bioethanol production affects the allocation. Moreover, the relative changes in barley price between the private and social optimum were analyzed. Based on the empirical analysis, the private optimum for barley based bioethanol production is 58 691 metric tons. However, the social optimum for barley based bioethanol production is 72 736 metric tons. The portion of farmland that is allocated to barley cultivation is increased if the climate benefits of bioethanol production are considered. In the private optimum, 1/19 of the total farmland is allocated to barley cultivation whereas in social optimum the share increases to 7/19. Furthermore, the increase in barley price between private and social optimum is rather modest. Total increase in price is only about 1,8 percent.

Precipitation-induced runoff and leaching from milled peat mining mires by peat types : a comparative method for estimating the loading of water bodies during peat pruduction

Precipitation-induced runoff and leaching from milled peat mining mires by peat types: a comparative method for estimating the loading of water bodies during peat production. This research project in environmental geology has arisen out of an observed need to be able to predict more accurately the loading of watercourses with detrimental organic substances and nutrients from already existing and planned peat production areas, since the authorities capacity for insisting on such predictions covering the whole duration of peat production in connection with evaluations of environmental impact is at present highly limited. National and international decisions regarding monitoring of the condition of watercourses and their improvement and restoration require more sophisticated evaluation methods in order to be able to forecast watercourse loading and its environmental impacts at the stage of land-use planning and preparations for peat production.The present project thus set out from the premise that it would be possible on the basis of existing mire and peat data properties to construct estimates for the typical loading from production mires over the whole duration of their exploitation. Finland has some 10 million hectares of peatland, accounting for almost a third of its total area. Macroclimatic conditions have varied in the course of the Holocene growth and development of this peatland, and with them the habitats of the peat-forming plants. Temperatures and moisture conditions have played a significant role in determining the dominant species of mire plants growing there at any particular time, the resulting mire types and the accumulation and deposition of plant remains to form the peat. The above climatic, environmental and mire development factors, together with ditching, have contributed, and continue to contribute, to the existence of peat horizons that differ in their physical and chemical properties, leading to differences in material transport between peatlands in a natural state and mires that have been ditched or prepared for forestry and peat production. Watercourse loading from the ditching of mires or their use for peat production can have detrimental effects on river and lake environments and their recreational use, especially where oxygen-consuming organic solids and soluble organic substances and nutrients are concerned. It has not previously been possible, however, to estimate in advance the watercourse loading likely to arise from ditching and peat production on the basis of the characteristics of the peat in a mire, although earlier observations have indicated that watercourse loading from peat production can vary greatly and it has been suggested that differences in peat properties may be of significance in this. Sprinkling is used here in combination with simulations of conditions in a milled peat production area to determine the influence of the physical and chemical properties of milled peats in production mires on surface runoff into the drainage ditches and the concentrations of material in the runoff water. Sprinkling and extraction experiments were carried out on 25 samples of milled Carex (C) and Sphagnum (S) peat of humification grades H 2.5 8.5 with moisture content in the range 23.4 89% on commencement of the first sprinkling, which was followed by a second sprinkling 24 hours later. The water retention capacity of the peat was best, and surface runoff lowest, with Sphagnum and Carex peat samples of humification grades H 2.5 6 in the moisture content class 56 75%. On account of the hydrophobicity of dry peat, runoff increased in a fairly regular manner with drying of the sample from 55% to 24 30%. Runoff from the samples with an original moisture content over 55% increased by 63% in the second round of sprinkling relative to the first, as they had practically reached saturation point on the first occasion, while those with an original moisture content below 55% retained their high runoff in the second round, due to continued hydrophobicity. The well-humified samples (H 6.5 8.5) with a moisture content over 80% showed a low water retention capacity and high runoff in both rounds of sprinkling. Loading of the runoff water with suspended solids, total phosphorus and total nitrogen, and also the chemical oxygen demand (CODMn O2), varied greatly in the sprinkling experiment, depending on the peat type and degree of humification, but concentrations of the same substances in the two sprinklings were closely or moderately closely correlated and these correlations were significant. The concentrations of suspended solids in the runoff water observed in the simulations of a peat production area and the direct surface runoff from it into the drainage ditch system in response to rain (sprinkling intensity 1.27 mm/min) varied c. 60-fold between the degrees of humification in the case of the Carex peats and c. 150-fold for the Sphagnum peats, while chemical oxygen demand varied c. 30-fold and c. 50-fold, respectively, total phosphorus c. 60-fold and c. 66-fold, total nitrogen c. 65-fold and c. 195-fold and ammonium nitrogen c. 90-fold and c. 30-fold. The increases in concentrations in the runoff water were very closely correlated with increases in humification of the peat. The correlations of the concentrations measured in extraction experiments (48 h) with peat type and degree of humification corresponded to those observed in the sprinkler experiments. The resulting figures for the surface runoff from a peat production area into the drainage ditches simulated by means of sprinkling and material concentrations in the runoff water were combined with statistics on the mean extent of daily rainfall (0 67 mm) during the frost-free period of the year (May October) over an observation period of 30 years to yield typical annual loading figures (kg/ha) for suspended solids (SS), chemical oxygen demand of organic matter (CODmn O2), total phosphorus (tot. P) and total nitrogen (tot. N) entering the ditches with respect to milled Carex (C) and Sphagnum (S) peats of humification grades H 2.5 8.5. In order to calculate the loading of drainage ditches from a milled peat production mire with the aid of these annual comparative values (in kg/ha), information is required on the properties of the intended production mire and its peat. Once data are available on the area of the mire, its peat depth, peat types and their degrees of humification, dry matter content, calorific value and corresponding energy content, it is possible to produce mutually comparable estimates for individual mires with respect to the annual loading of the drainage ditch system and the surrounding watercourse for the whole service life of the production area, the duration of this service life, determinations of energy content and the amount of loading per unit of energy generated (kg/MWh). In the 8 mires in the Köyhäjoki basin, Central Ostrobothnia, taken as an example, the loading of suspended solids (SS) in the drainage ditch networks calculated on the basis of the typical values obtained here and existing mire and peat data and expressed per unit of energy generated varied between the mires and horizons in the range 0.9 16.5 kg/MWh. One of the aims of this work was to develop means of making better use of existing mire and peat data and the results of corings and other field investigations. In this respect combination of the typical loading values (kg/ha) obtained here for S, SC, CS and C peats and the various degrees of humification (H 2.5 8.5) with the above mire and peat data by means of a computer program for the acquisition and handling of such data would enable all the information currently available and that deposited in the system in the future to be used for defining watercourse loading estimates for mires and comparing them with the corresponding estimates of energy content. The intention behind this work has been to respond to the challenge facing the energy generation industry to find larger peat production areas that exert less loading on the environment and to that facing the environmental authorities to improve the means available for estimating watercourse loading from peat production and its environmental impacts in advance. The results conform well to the initial hypothesis and to the goals laid down for the research and should enable watercourse loading from existing and planned peat production to be evaluated better in the future and the resulting impacts to be taken into account when planning land use and energy generation. The advance loading information available in this way would be of value in the selection of individual peat production areas, the planning of their exploitation, the introduction of water protection measures and the planning of loading inspections, in order to achieve controlled peat production that pays due attention to environmental considerations.

The effects of stall surfaces and milk yield on the lying behavior of dairy cow

The importance of lying behavior to dairy cows and the feasible definition of lying has attracted many studies on the subject. Cattle show both behavioral and physiological stress responses when subjected to thwarting of their lying behavior. If cows are unable to lie down they later compensate for lost lying time when possible. Environmental factors such as housing and bedding systems have been noted to affect the time spent lying, but there is usually large variation in lying time between individuals. Internal factors such as the reproductive stage, age and health of cows affect their lying time and can cause variation. However, the effect of higher milk production on behavior has not previously been illuminated. The objective of this study was to provide data applicable for the improvement of resting conditions of cows. The preference of stall surface material, differences in normal behavior per unit time and various health measures were observed. The aim was to evaluate lying behavior and cow comfort on different stall bedding materials. In addition, the effect of milk yield on behavior was examined in a tie stall experiment. The preferences for surface materials were investigated in 5 experiments using 3 surface materials with bedding manipulations. According to the results, the cows preferred abundant straw bedding and soft rubber mats. However, they showed an aversion to sand bedding. Some individuals even refused to use stalls with sand when no organic bedding material was present. However, this study was unable to determine the reason for the avoidance, as neither the sand particle size nor thermal properties appeared critical. However, previous exposure to particular surface materials increased the preference for them. The amount of straw bedding was found to be an important factor affecting the preferences for stalls, and the lying time in stalls increased when the flooring softness was improved by applying straw or by installing elastic mats. Despite sand being the least preferred flooring material in preference tests, the health of legs improved during exposure to sand-floored stalls. Moreover cows using sand were cleaner than those that used straw stalls. Thus, sand bedding entailed some health benefits despite the contradictory results of preference tests, which more strongly reflected the perceptions of individual animals. Milk yield was observed to affect behavior by reducing the lying time, possibly due to factors other than longer duration of eating. High yielding cows seemed to intensify their lying bouts, as they were observed to lie with the neck muscles relaxed sooner after lying down than lower yielding cows. In conclusion, cows were found to prefer softer stall surface materials and organic bedding material. In addition, the lying time was reduced by a high milk yield, although the lying time seemed to be important for resting. Cows might differ in the needs for their lying environment. The management of dairy cows should eliminate any unnecessary prevention of lying, as even in tie-stalls high yielding cows seem to be affected by time constraints. Adding fresh bedding material to stalls increases the comfort of any stall flooring material.

Vikuroivia vilkaisuja : Ruumis, sukupuoli, seksuaalisuus ja visuaalisen kulttuurin tutkimus

The PhD dissertation "Bucking Glances: On Body, Gender, Sexuality and Visual Culture Research" consists of theoretical introduction and five articles published between 2002-2005. The articles analyze the position of visual representations in the processes of knowledge production on acceptable genders, bodies, and sexualities in contemporary Wes¬tern societies. The research material is heterogeneous, consisting of representations of contemporary art, advertisements, and fashion images. The ideological starting point of the PhD dissertation is the politics of the gaze and the methods used to expose this are the concepts of oppositional gaze, close reading, and resisting reading. The study situates visual representations in dialogue with the concepts of the grotesque and androgyny, as well as with queer-theory and theories of the gaze. The research challenges normative meanings of visual representations and opens up space for more non-conventional readings attached to femininity and masculinity. The visual material is read as troubling the prevailing heteronormative gender system. The dissertation also indicates how visual culture research utilizing the approach of queer theory can be fruitful in opposing and re-visioning changes in the repressive gender system. The article "A Heroic Male and A Beautiful Woman. Teemu Mäki, Orlan and the Ambivalence of the Grotesque Body" problematizes the concept of heroic masculinity through the analysis of the Finnish artist Teemu Mäki's masochistic performance The Good Friday (1989). It also analyzes cosmetic surgery, undertaken by the French artist Orlan, as a cultural tool in constructing and visualizing the contemporary, com¬mercial ideals of female beauty. The article "Boys Will Be Girls Will Be Boys Will Be Girls. The Ambivalence of Androgyny in Calvin Klein' Advertisements" is a close reading of the Calvin Klein perfume advertisement One (1998) in reference to the concept of androgyny. The critical point of the article is that androgynous male bodies allow the extension of the categorical boundaries of masculinity and homosexuality, whereas representations of androgynous women feed into the prevailing stereotypes of femininity, namely the fear of fat. The article "See-through Closet: Female Androgyny in the 1990s Fashion Images, New Woman and Lesbian Chic" analyzes the late 1990s fashion advertisements through the concept of female androgyny. The article argues that the figures of the masculine female androgynes in the late 1990s fashion magazines do not problematize the dichotomous gender binary. The women do not pass as men but produce a variation of heterosexual desirability. At the same time, the representations open up space for lesbian gazing and desiring. The article "Why are there no lesbian advertisements?" addresses the issue of femme gaze and desire in relation to heterosexual fashion advertisements from the British edition of the mainstream fashion magazine Vogue. The article considers possibilities for resistant femme visibility, identification, and desire. The article "Woman, Food, Home. Pirjetta Brander's and Heidi Romo's Works as Bucking Representations of Femininity" analyses the production and queering of heteronormative femininity and family through the analysis of art works. The article discusses how the term queer has been translated into Finnish. The article also introduces a new translation for the term queer: the noun vikuuri, i.e. faulty form and the verb vikuroida, i.e. to buck. In Finnish, the term vikuuri is the vernacular or broken form of the term figure, i.e. figuuri. Vikuuri represents all forms situated outside the norm and the normative.

Work Stress and Early Atherosclerosis: Do Genetic Background and Pre-Employment Risk Factors Explain Conflicting Findings?

According to the models conceptualizing work stress, increased risk of health problems arise when high job demands co-occur with low job control (the demand-control model) or the efforts invested by the employee are disproportionately high compared to the rewards received (effort-reward imbalance model). This study examined the association between work stress and early atherosclerosis with particular attention to the role of pre-employment risk factors and genetic background in this association. The subjects were young healthy adults aged 24-39 who were participating in the 21-year follow-up of the ongoing prospective "Cardiovascular Risk in Young Finns" study in 2001-2002. Work stress was evaluated with questionnaires on demand-control model and on effort-reward model. Atherosclerosis was assessed with ultrasound of carotid artery intima-media thickness (IMT). In addition, risk for enhanced atherosclerotic process was assessed by measuring with heart rate variability and heart rate. Pre-employment risk factors, measured at age 12 to 18, included such as body mass index, blood lipids, family history of coronary heart disease, and parental socioeconomic position. Variants of the neuregulin-1 were determined using genomic DNA. The results showed that higher work stress was associated with higher IMT in men. This association was not attenuated by traditional risk factors of atherosclerosis and coronary heart disease or by pre-employment risk factors measured in adolescence. Neuregulin-1 gene moderated the association between work stress and IMT in men. A significant association between work stress and IMT was found only for the T/T genotype of the neuregulin-1 gene but not for other genotypes. Among women an association was found between higher work stress and lower heart rate variability, suggesting higher risk for developing atherosclerosis. These associations could not be explained by demographic characteristics or coronary risk factors. The present findings provide evidence for an association between work stress and atherosclerosis in relatively young population. This association seems to be modified by genetic influences but it does not appear to be confounded by pre-employment adolescent risk factors.

Middleware for Mobile Sensing Applications in Urban Environments

Sensor networks represent an attractive tool to observe the physical world. Networks of tiny sensors can be used to detect a fire in a forest, to monitor the level of pollution in a river, or to check on the structural integrity of a bridge. Application-specific deployments of static-sensor networks have been widely investigated. Commonly, these networks involve a centralized data-collection point and no sharing of data outside the organization that owns it. Although this approach can accommodate many application scenarios, it significantly deviates from the pervasive computing vision of ubiquitous sensing where user applications seamlessly access anytime, anywhere data produced by sensors embedded in the surroundings. With the ubiquity and ever-increasing capabilities of mobile devices, urban environments can help give substance to the ubiquitous sensing vision through Urbanets, spontaneously created urban networks. Urbanets consist of mobile multi-sensor devices, such as smart phones and vehicular systems, public sensor networks deployed by municipalities, and individual sensors incorporated in buildings, roads, or daily artifacts. My thesis is that "multi-sensor mobile devices can be successfully programmed to become the underpinning elements of an open, infrastructure-less, distributed sensing platform that can bring sensor data out of their traditional close-loop networks into everyday urban applications". Urbanets can support a variety of services ranging from emergency and surveillance to tourist guidance and entertainment. For instance, cars can be used to provide traffic information services to alert drivers to upcoming traffic jams, and phones to provide shopping recommender services to inform users of special offers at the mall. Urbanets cannot be programmed using traditional distributed computing models, which assume underlying networks with functionally homogeneous nodes, stable configurations, and known delays. Conversely, Urbanets have functionally heterogeneous nodes, volatile configurations, and unknown delays. Instead, solutions developed for sensor networks and mobile ad hoc networks can be leveraged to provide novel architectures that address Urbanet-specific requirements, while providing useful abstractions that hide the network complexity from the programmer. This dissertation presents two middleware architectures that can support mobile sensing applications in Urbanets. Contory offers a declarative programming model that views Urbanets as a distributed sensor database and exposes an SQL-like interface to developers. Context-aware Migratory Services provides a client-server paradigm, where services are capable of migrating to different nodes in the network in order to maintain a continuous and semantically correct interaction with clients. Compared to previous approaches to supporting mobile sensing urban applications, our architectures are entirely distributed and do not assume constant availability of Internet connectivity. In addition, they allow on-demand collection of sensor data with the accuracy and at the frequency required by every application. These architectures have been implemented in Java and tested on smart phones. They have proved successful in supporting several prototype applications and experimental results obtained in ad hoc networks of phones have demonstrated their feasibility with reasonable performance in terms of latency, memory, and energy consumption.

Onko tutkijan sukupuolella väliä? : Kemian ja fysiikan alan tutkijoiden ja tohtoriopiskelijoiden tutkijanura IDECAT-verkostossa sukupuoliperspektiivistä.

Tutkimukseni kohteena ovat mies- ja naispuoliset tutkijat ja tohtoriopiskelijat, jotka ovat osallistuneet katalyysitutkimukseen keskittyvän tutkimusverkosto IDECAT:in toimintaan. Tutkielmassani pyrin selvittämään, onko naisten ja miesten tutkijanuran välillä eroa ja jos on, niin minkälainen tämä ero on. Pyrin myös saamaan selville, onko naisten tutkijanuralla esteitä ja esiintyykö tiedeyhteisössä sukupuolesta johtuvaa syrjintää. IDECAT (Integrated Design of Catalytic Nanomaterials for a Sustainable Production) on EU-rahoitteinen, kemian tekniikkaan liittyvään katalyysitutkimukseen keskittyvä tutkimusverkosto, johon kuuluu alan tutkimusyksiköitä ja yliopistoja 12 Euroopan maasta. IDECAT:iin kuuluu noin 500-600 henkilöä. Tutkimukseni pohjautuu kahteen kyselytutkimukseen, jotka toteutettiin Internetissä 2009-2010. Ensimmäinen kyselytutkimus oli vastaajien saatavilla loka-marraskuussa 2009 ja siinä selvitettiin IDECAT:in tutkijoiden ja tohtoriopiskelijoiden tasa-arvotilannetta yleisesti. Kyselyyn vastasi 83 henkilöä, joista 51% oli naisia ja 49 % miehiä. Kyselyssä käytettiin strukturoitua kyselylomaketta ja tulokset analysoitiin kvantitatiivisesti SPSS tilasto-ohjelmalla. Tilastollisena menetelmänä käytän ristiintaulukointia. Toinen kyselytutkimus (jatkokysely) keskittyy tiedeyhteisössä tapahtuvaan sukupuolesta johtuvaan syrjintään ja se oli vastaajien saatavilla huhti-toukokuussa 2010. Jatkokyselyn kysymykset ovat avokysymyksiä ja ne analysoitiin laadullisesti. Jatkokyselyyn vastasi 24 henkilöä, joista 6 kuvasi yksityiskohtaisesti syrjintäkokemuksiaan tiedeyhteisössä. Teoreettisena viitekehyksenä käytän tutkimuksessani Joan Ackerin sukupuolittuneen organisaation teoriaa ja siihen liittyviä, organisaation toiminnassa ilmeneviä sukupuolittuneita prosesseja. Sukupuolittuneet prosessit ovat ajattelutapoja , käytäntöjä ja asenteita, joilla sukupuolet erotetaan toisistaan ja joilla tuotetaan sukupuolten välisiä valtasuhteita. Naisten ja miesten tutkijanuran välillä on aineistossani joitakin merkittäviä eroja. Sukupuolesta johtuva syrjintä on yleistä vastaajien keskuudessa ja naiset ovat kokeneet sitä useammin kuin miehet. 67% naisvastaajista ja 37% miesvastaajista on kokenut sukupuolesta johtuvaa syrjintää. Naisvastaajat myös kokevat miehiä useammin, että he eivät saa riittävästi tukea ja kannustusta esimiehiltään. Lisäksi naisia on pyydetty mukaan tieteelliseen yhteistyöhön miehiä harvemmin. Useimmat muuttujat eivät kuitenkaan tuo eroa sukupuolten välille. Tutkijanaiset kokevat ylenemismahdollisuutensa lähes yhtä hyviksi kuin miehet, naiset ja miehet työskentelevät yhtä usein määräaikaisissa tehtävissä ja naiset työskentelevät kokopäiväisesti lähes yhtä usein kuin miehet. Naiset pitävät perheen ja työn yhdistämistä helppona. Sukupuolittuneita prosesseja ilmenee erityisesti sukupuolten väliseen työnjakoon ja sosiaalisen tuen ja vallan jakoon tiedeyhteisössä liittyvissä tilanteissa. Sukupuolittuneisuus ei kuitenkaan ole totaalista, monien kyselyn muuttujien kohdalla sukupuolittumista tai eroa sukupuolten välille ei tullut. Monet kyselyn muuttujat osoittavatkin, että naiset ja miehet kokevat, että heitä kohdellaan melko tasa-arvoisesti. Tietyillä osa-alueilla epätasa-arvoisen kohtelun kokemukset ovat kuitenkin yleisiä, mikä tuottaa ristiriitaisen kuvan tiedeyhteisön tasa-arvotilanteesta. Tämä voi viitata siihen, että tutkijanaisten ja miesten asemat ja roolit tiedeyhteisössä eivät ole pysyviä ja staattisia, vaan aktiivisessa muutoksen tilassa. Tutkijanaisten asemaa tiedeyhteisössä voidaan lisäksi parantaa reagoimalla ja puuttumalla sukupuolesta johtuvaan syrjintään, pitämällä tasa-arvoasioita esillä sekä kiinnittämällä huomiota johtamiskäytäntöihin, esimerkiksi palkkaamalla lisää naisjohtajia. Avainsanat Keywords: Sukupuolittunut organisaatio, sukupuolittuneet prosessit, kyselytutkimus, kvantitatiivinen tutkimus, tiedeyhteisö, sukupuolisyrjintä, tutkijanaiset, naistutkijat, sukupuolten tasa-arvo, gendered organization, academia, female scientists, gender equality

Juvenile diversity of tree species in Theobroma cacao L. agroforestry and primary forest – Central Sulawesi, Indonesia

This thesis studies the tree species’ juvenile diversity in cacao (Theobroma cacao L.) based agroforestry and in primary forest in a natural conservation forest environment of Lore Lindu National Park, Sulawesi, Indonesia. Species’ adult composition in Lore Lindu National Park is relatively well studied, less is known about tree species’ diversity in seedling communities particularly in frequently disturbed cacao agroforestry field environment. Cacao production forms a potentially serious thread for maintaining the conservation areas pristine and forested in Sulawesi. The impacts of cacao production on natural environment are directly linked to the diversity and abundance of shade tree usage. The study aims at comparing differences between cacao agroforestry and natural forest in the surrounding area in their species composition in seedling and sapling size categories. The study was carried out in two parts. Biodiversity inventory of seedlings and saplings was combined with social survey with farmer interviews. Aim of the survey was to gain knowledge of the cacao fields, and farmers’ observations and choices regarding tree species associated with cacao. Data was collected in summer 2008. The assessment of the impact of environmental factors of solar radiation, weeding frequency, cacao tree planting density, distance to forest and distance to main park road, and type of habitat on seedling and sapling compositions was done with Non-metric Multidimensional Scaling (NMS). Outlier analysis was used to assess distorting variables for NMS, and Multi-Response Permutation Procedures (MRPP) analysis to differentiate the impact of categorical variables. Sampling success was estimated with rarefaction curves and jackknife estimate of species richness. In the inventory 135 species of trees and shrubs were found. Only some agroforestry related species were dominating. The most species rich were sapling communities in forest habitat. NMS was showing generally low linear correlation between variation of species composition and environmental variables. Solar radiation was having most significance as explaining variable. The most clearly separated in ordination were cacao and forest habitats. The results of seedling and sapling inventory were only partly coinciding with farmers’ knowledge of the tree species occurring on their fields. More research with frequent assessment of seedling cohorts is needed due to natural variability of cohorts and high mortality rate of seedlings.

Porsastuotannon tuottavuuskehitys sikatilinpäätöstiloilla vuosina 2003–2008

Tutkimuksessa mitataan porsastuotannon tuottavuuden kehitystä ProAgrian sikatilinpäätöstiloilla vuosina 2003–2008. Tuottavuutta mitataan Fisher-tuottavuusindeksillä, joka dekomponoidaan tekniseen, allokatiiviseen ja skaalatehokkuuteen sekä teknologiseen kehitykseen ja hintavaikutukseen. Koko aineistosta aggregoidulla tuottavuusindeksillä mitattuna tuottavuus kasvoi viidessä vuodessa yhteensä 14,3 % vuotuisen kasvun ollessa 2,7 %. Tuottajien keskimääräinen tuottavuusindeksi antaa lähes saman tuloksen: sen mukaan tuottavuus kasvaa yhteensä 14,7 %, mikä tekee 2,8 % vuodessa. Skaalatehokkuuden paraneminen havaitaan merkittävimmäksi tuottavuuskasvun lähteeksi. Skaalatehokkuus paranee aggregoidusti mitattuna 1,6 % vuodessa ja tiloilla keskimäärin 2,1 % vuodessa. Teknisen tehokkuuden koheneminen on toinen tuottavuuskasvua edistävä tekijä tutkimusjaksolla. Molemmilla mittaustavoilla nousu on keskimäärin 1,4 % vuodessa. Allokatiivinen tehokkuus laskee hieman: aggregoidusti mitattuna 0,1 % ja keskimäärin 0,4 % vuodessa. Teknologinen kehitys tutkimusjaksolla on lievästi negatiivista, keskimäärin -0,1 % vuodessa. Vuosittaiset vaihtelut ovat kuitenkin voimakkaita. Hintojen muutokset eivät juuri ole vaikuttaneet tuottavuuden tasoon, sillä hintavaikutuksen vuotuiset muutokset jäävät jokaisena vuonna alle puoleen prosenttiin ja keskimääräinen vuotuinen muutos on -0,1 %. Keskeinen tuottavuuskasvua edistänyt tekijä näyttää olleen tilakoon kasvu, joka on parantanut rakenteellista tehokkuutta. Teknologisen kehityksen jääminen negatiiviseksi kuitenkin tarkoittaa, että paras havaittu tuottavuuden taso ei ole noussut lainkaan.

Constructing a Community : Myths and Realities of the Open Development Model

The open development model of software production has been characterized as the future model of knowledge production and distributed work. Open development model refers to publicly available source code ensured by an open source license, and the extensive and varied distributed participation of volunteers enabled by the Internet. Contemporary spokesmen of open source communities and academics view open source development as a new form of volunteer work activity characterized by hacker ethic and bazaar governance . The development of the Linux operating system is perhaps the best know example of such an open source project. It started as an effort by a user-developer and grew quickly into a large project with hundreds of user-developer as contributors. However, in hybrids , in which firms participate in open source projects oriented towards end-users, it seems that most users do not write code. The OpenOffice.org project, initiated by Sun Microsystems, in this study represents such a project. In addition, the Finnish public sector ICT decision-making concerning open source use is studied. The purpose is to explore the assumptions, theories and myths related to the open development model by analysing the discursive construction of the OpenOffice.org community: its developers, users and management. The qualitative study aims at shedding light on the dynamics and challenges of community construction and maintenance, and related power relations in hybrid open source, by asking two main research questions: How is the structure and membership constellation of the community, specifically the relation between developers and users linguistically constructed in hybrid open development? What characterizes Internet-mediated virtual communities and how can they be defined? How do they differ from hierarchical forms of knowledge production on one hand and from traditional volunteer communities on the other? The study utilizes sociological, psychological and anthropological concepts of community for understanding the connection between the real and the imaginary in so-called virtual open source communities. Intermediary methodological and analytical concepts are borrowed from discourse and rhetorical theories. A discursive-rhetorical approach is offered as a methodological toolkit for studying texts and writing in Internet communities. The empirical chapters approach the problem of community and its membership from four complementary points of views. The data comprises mailing list discussion, personal interviews, web page writings, email exchanges, field notes and other historical documents. The four viewpoints are: 1) the community as conceived by volunteers 2) the individual contributor s attachment to the project 3) public sector organizations as users of open source 4) the community as articulated by the community manager. I arrive at four conclusions concerning my empirical studies (1-4) and two general conclusions (5-6). 1) Sun Microsystems and OpenOffice.org Groupware volunteers failed in developing necessary and sufficient open code and open dialogue to ensure collaboration thus splitting the Groupware community into volunteers we and the firm them . 2) Instead of separating intrinsic and extrinsic motivations, I find that volunteers unique patterns of motivations are tied to changing objects and personal histories prior and during participation in the OpenOffice.org Lingucomponent project. Rather than seeing volunteers as a unified community, they can be better understood as independent entrepreneurs in search of a collaborative community . The boundaries between work and hobby are blurred and shifting, thus questioning the usefulness of the concept of volunteer . 3) The public sector ICT discourse portrays a dilemma and tension between the freedom to choose, use and develop one s desktop in the spirit of open source on one hand and the striving for better desktop control and maintenance by IT staff and user advocates, on the other. The link between the global OpenOffice.org community and the local end-user practices are weak and mediated by the problematic IT staff-(end)user relationship. 4) Authoring community can be seen as a new hybrid open source community-type of managerial practice. The ambiguous concept of community is a powerful strategic tool for orienting towards multiple real and imaginary audiences as evidenced in the global membership rhetoric. 5) The changing and contradictory discourses of this study show a change in the conceptual system and developer-user relationship of the open development model. This change is characterized as a movement from hacker ethic and bazaar governance to more professionally and strategically regulated community. 6) Community is simultaneously real and imagined, and can be characterized as a runaway community . Discursive-action can be seen as a specific type of online open source engagement. Hierarchies and structures are created through discursive acts. Key words: Open Source Software, open development model, community, motivation, discourse, rhetoric, developer, user, end-user