Precipitation-induced runoff and leaching from milled peat mining mires by peat types : a comparative method for estimating the loading of water bodies during peat pruduction

Precipitation-induced runoff and leaching from milled peat mining mires by peat types: a comparative method for estimating the loading of water bodies during peat production. This research project in environmental geology has arisen out of an observed need to be able to predict more accurately the loading of watercourses with detrimental organic substances and nutrients from already existing and planned peat production areas, since the authorities capacity for insisting on such predictions covering the whole duration of peat production in connection with evaluations of environmental impact is at present highly limited. National and international decisions regarding monitoring of the condition of watercourses and their improvement and restoration require more sophisticated evaluation methods in order to be able to forecast watercourse loading and its environmental impacts at the stage of land-use planning and preparations for peat production.The present project thus set out from the premise that it would be possible on the basis of existing mire and peat data properties to construct estimates for the typical loading from production mires over the whole duration of their exploitation. Finland has some 10 million hectares of peatland, accounting for almost a third of its total area. Macroclimatic conditions have varied in the course of the Holocene growth and development of this peatland, and with them the habitats of the peat-forming plants. Temperatures and moisture conditions have played a significant role in determining the dominant species of mire plants growing there at any particular time, the resulting mire types and the accumulation and deposition of plant remains to form the peat. The above climatic, environmental and mire development factors, together with ditching, have contributed, and continue to contribute, to the existence of peat horizons that differ in their physical and chemical properties, leading to differences in material transport between peatlands in a natural state and mires that have been ditched or prepared for forestry and peat production. Watercourse loading from the ditching of mires or their use for peat production can have detrimental effects on river and lake environments and their recreational use, especially where oxygen-consuming organic solids and soluble organic substances and nutrients are concerned. It has not previously been possible, however, to estimate in advance the watercourse loading likely to arise from ditching and peat production on the basis of the characteristics of the peat in a mire, although earlier observations have indicated that watercourse loading from peat production can vary greatly and it has been suggested that differences in peat properties may be of significance in this. Sprinkling is used here in combination with simulations of conditions in a milled peat production area to determine the influence of the physical and chemical properties of milled peats in production mires on surface runoff into the drainage ditches and the concentrations of material in the runoff water. Sprinkling and extraction experiments were carried out on 25 samples of milled Carex (C) and Sphagnum (S) peat of humification grades H 2.5 8.5 with moisture content in the range 23.4 89% on commencement of the first sprinkling, which was followed by a second sprinkling 24 hours later. The water retention capacity of the peat was best, and surface runoff lowest, with Sphagnum and Carex peat samples of humification grades H 2.5 6 in the moisture content class 56 75%. On account of the hydrophobicity of dry peat, runoff increased in a fairly regular manner with drying of the sample from 55% to 24 30%. Runoff from the samples with an original moisture content over 55% increased by 63% in the second round of sprinkling relative to the first, as they had practically reached saturation point on the first occasion, while those with an original moisture content below 55% retained their high runoff in the second round, due to continued hydrophobicity. The well-humified samples (H 6.5 8.5) with a moisture content over 80% showed a low water retention capacity and high runoff in both rounds of sprinkling. Loading of the runoff water with suspended solids, total phosphorus and total nitrogen, and also the chemical oxygen demand (CODMn O2), varied greatly in the sprinkling experiment, depending on the peat type and degree of humification, but concentrations of the same substances in the two sprinklings were closely or moderately closely correlated and these correlations were significant. The concentrations of suspended solids in the runoff water observed in the simulations of a peat production area and the direct surface runoff from it into the drainage ditch system in response to rain (sprinkling intensity 1.27 mm/min) varied c. 60-fold between the degrees of humification in the case of the Carex peats and c. 150-fold for the Sphagnum peats, while chemical oxygen demand varied c. 30-fold and c. 50-fold, respectively, total phosphorus c. 60-fold and c. 66-fold, total nitrogen c. 65-fold and c. 195-fold and ammonium nitrogen c. 90-fold and c. 30-fold. The increases in concentrations in the runoff water were very closely correlated with increases in humification of the peat. The correlations of the concentrations measured in extraction experiments (48 h) with peat type and degree of humification corresponded to those observed in the sprinkler experiments. The resulting figures for the surface runoff from a peat production area into the drainage ditches simulated by means of sprinkling and material concentrations in the runoff water were combined with statistics on the mean extent of daily rainfall (0 67 mm) during the frost-free period of the year (May October) over an observation period of 30 years to yield typical annual loading figures (kg/ha) for suspended solids (SS), chemical oxygen demand of organic matter (CODmn O2), total phosphorus (tot. P) and total nitrogen (tot. N) entering the ditches with respect to milled Carex (C) and Sphagnum (S) peats of humification grades H 2.5 8.5. In order to calculate the loading of drainage ditches from a milled peat production mire with the aid of these annual comparative values (in kg/ha), information is required on the properties of the intended production mire and its peat. Once data are available on the area of the mire, its peat depth, peat types and their degrees of humification, dry matter content, calorific value and corresponding energy content, it is possible to produce mutually comparable estimates for individual mires with respect to the annual loading of the drainage ditch system and the surrounding watercourse for the whole service life of the production area, the duration of this service life, determinations of energy content and the amount of loading per unit of energy generated (kg/MWh). In the 8 mires in the Köyhäjoki basin, Central Ostrobothnia, taken as an example, the loading of suspended solids (SS) in the drainage ditch networks calculated on the basis of the typical values obtained here and existing mire and peat data and expressed per unit of energy generated varied between the mires and horizons in the range 0.9 16.5 kg/MWh. One of the aims of this work was to develop means of making better use of existing mire and peat data and the results of corings and other field investigations. In this respect combination of the typical loading values (kg/ha) obtained here for S, SC, CS and C peats and the various degrees of humification (H 2.5 8.5) with the above mire and peat data by means of a computer program for the acquisition and handling of such data would enable all the information currently available and that deposited in the system in the future to be used for defining watercourse loading estimates for mires and comparing them with the corresponding estimates of energy content. The intention behind this work has been to respond to the challenge facing the energy generation industry to find larger peat production areas that exert less loading on the environment and to that facing the environmental authorities to improve the means available for estimating watercourse loading from peat production and its environmental impacts in advance. The results conform well to the initial hypothesis and to the goals laid down for the research and should enable watercourse loading from existing and planned peat production to be evaluated better in the future and the resulting impacts to be taken into account when planning land use and energy generation. The advance loading information available in this way would be of value in the selection of individual peat production areas, the planning of their exploitation, the introduction of water protection measures and the planning of loading inspections, in order to achieve controlled peat production that pays due attention to environmental considerations.

Mining Sequential Data – in Search of Segmental Structures

Segmentation is a data mining technique yielding simplified representations of sequences of ordered points. A sequence is divided into some number of homogeneous blocks, and all points within a segment are described by a single value. The focus in this thesis is on piecewise-constant segments, where the most likely description for each segment and the most likely segmentation into some number of blocks can be computed efficiently. Representing sequences as segmentations is useful in, e.g., storage and indexing tasks in sequence databases, and segmentation can be used as a tool in learning about the structure of a given sequence. The discussion in this thesis begins with basic questions related to segmentation analysis, such as choosing the number of segments, and evaluating the obtained segmentations. Standard model selection techniques are shown to perform well for the sequence segmentation task. Segmentation evaluation is proposed with respect to a known segmentation structure. Applying segmentation on certain features of a sequence is shown to yield segmentations that are significantly close to the known underlying structure. Two extensions to the basic segmentation framework are introduced: unimodal segmentation and basis segmentation. The former is concerned with segmentations where the segment descriptions first increase and then decrease, and the latter with the interplay between different dimensions and segments in the sequence. These problems are formally defined and algorithms for solving them are provided and analyzed. Practical applications for segmentation techniques include time series and data stream analysis, text analysis, and biological sequence analysis. In this thesis segmentation applications are demonstrated in analyzing genomic sequences.

Transcending “the Impossible” : From Dead End to Expansive Learning

This dissertation investigates changes in bank work and the experience of impossibility attached to these by workers at the local level from the viewpoint of work-related well-being and collective learning. A special challenge in my work is to conceptualize the experience of impossibility as related to change, and as a starting point and tool for development work. The subject of the dissertation, solving the impossible as a collective learning process, came up as a central theme in an earlier project: Work Units between the Old and the New (1997 – 1999). Its aim was to investigate how change is constructed as a long-term process, starting from the planning of the change until its final realization in everyday banking work. I studied changes taking place in the former Postipankki (Postal Bank), later called Leonia. The three-year study involved the Branch Office of Martinlaakso, and was conducted from the perspective of well-being in a change process. The sense of impossibility involved in changes turned out to be one of the most crucial factors impairing the sense of well-being. The work community that was the target of my study did not have the available tools to construct the change locally, or to deal with the change-related impossibility by solving it through a mutual process among themselves. During the last year of the project, I carried out an intervention for development in the Branch Office, as collaboration between the researchers and the workers. The purpose of the intervention was to resolve such perceived change-related impossibility as experienced repeatedly and considered by the work community as relevant to work-related well-being. The documentation of the intervention – audio records from development sessions, written assignments by workers and assessment or evaluation interviews – constitute the essential data for my dissertation. The earlier data, collected and analysed during the first two years, provides a historical perspective on the process, all the way from construction of the impossibility towards resolving and transcending it. The aim of my dissertation is to understand the progress of developmental intervention as a shared, possibly expansive learning process within a work community and thus to provide tools for perceiving and constructing local change. I chose the change-related impossibility as a starting point for development work in the work community and as a target of conceptualization. This, I feel, is the most important contribution of my dissertation. While the intervention was in progress, the concept of impossibility started emerging as a stimulating tool for development work. An understanding of such a process can be applied to development work outside banking work as well. According to my results, it is pivotal that a concept stimulating development is strongly connected with everyday experiences of and speech about changes in work activity, as well as with the theoretical framework of work development. During this process, development work on a local level became of utmost interest as a case study for managing change. Theoretically, this was conceptualized as so-called second-order work and this concept accompanies us all the way through the research process. Learning second-order work and constructing tools based on this work have proved crucial for promoting well-being in the change circumstances in a local work unit. The lack of second-order work has led to non-well-being and inability to transcend the change-related sense of impossibility in the work community. Solving the impossible, either individually or situationally, did not orient the workers towards solving problems of impossibility together as a work community. Because the experience of the impossibility and coming to terms with transcending it are the starting point and the target of conceptualization in this dissertation, the research provides a fresh viewpoint on the theoretical framework of change and developmental work. My dissertation can facilitate construction of local changes necessitated by the recent financial crisis, and thus promote fluency and well-being in work units. It can also support change-related well-being in other areas of working life.

I konstens namn - scenen som arbetsmiljö : Arbetsplatsmobbning ur skådespelarperspektiv

Workplace bullying is a topic of current interest in Finland. Workplace bullying is found in all professions, including the artistic ones. This thesis aims to explore workplace bullying from the view of the Finland-Swedish actors as a phenomenon that within dramatic art is difficult to define due to the fact that the body and emotions of an actor constitute his or her working tools. The research aims to deepen the understanding of the actors’ working situation, and particularly of the difficulties and problems actors face when exercising their job. The research problems are: What forms of bullying are the actors exposed to? Who is bullying? How is the bullying received by the actors, and what are the possible consequences? The theoretical orientation of this thesis is based upon dialogical philosophy where phenomenology, hermeneutics and dialog meet in an orientation where the unseen is emphasized and made visible. Artistic leadership should be based upon a pedagogic understanding that by an open and equal dialog with the Other recognizes human diversity. The narrative research was undertaken by using an interview guide for the interviews with eleven actors, six women and five men with the voice of a sixth man represented by an article. The interviews, each on average 118 minutes, were recorded and transcribed. The method of discursive analysis was initiated by numerous reflective readings based on analytic induction. The inductive part of the analysis consisted of mapping out the individual experiences of bullying where after the process of finding connecting common features in the extensive material took place. The coded data was then deductively grouped together according to the research problems, and subgroups were formed for deeper description. The research findings show that workplace bullying is an everyday occurrence within the field of dramatic art. Actors are bullied by theatre managers and directors as well as by colleagues and other personnel. The main areas of bullying is depreciation of one’s professional skills, the existing jargon, sexual harassment, collective bullying and bullying because of personal qualities. A significant finding concerning this problem was the existing culture of silence. Even if actually seeing and hearing a colleague being bullied, few stood up to defend the person being bullied because of fear of retaliation. Even the person actually being the object for bullying found it difficult to take any actions.

Data mining for telecommunications network log analysis

Telecommunications network management is based on huge amounts of data that are continuously collected from elements and devices from all around the network. The data is monitored and analysed to provide information for decision making in all operation functions. Knowledge discovery and data mining methods can support fast-pace decision making in network operations. In this thesis, I analyse decision making on different levels of network operations. I identify the requirements decision-making sets for knowledge discovery and data mining tools and methods, and I study resources that are available to them. I then propose two methods for augmenting and applying frequent sets to support everyday decision making. The proposed methods are Comprehensive Log Compression for log data summarisation and Queryable Log Compression for semantic compression of log data. Finally I suggest a model for a continuous knowledge discovery process and outline how it can be implemented and integrated to the existing network operations infrastructure.

Matrix Decomposition Methods for Data Mining : Computational Complexity and Algorithms

Matrix decompositions, where a given matrix is represented as a product of two other matrices, are regularly used in data mining. Most matrix decompositions have their roots in linear algebra, but the needs of data mining are not always those of linear algebra. In data mining one needs to have results that are interpretable -- and what is considered interpretable in data mining can be very different to what is considered interpretable in linear algebra. --- The purpose of this thesis is to study matrix decompositions that directly address the issue of interpretability. An example is a decomposition of binary matrices where the factor matrices are assumed to be binary and the matrix multiplication is Boolean. The restriction to binary factor matrices increases interpretability -- factor matrices are of the same type as the original matrix -- and allows the use of Boolean matrix multiplication, which is often more intuitive than normal matrix multiplication with binary matrices. Also several other decomposition methods are described, and the computational complexity of computing them is studied together with the hardness of approximating the related optimization problems. Based on these studies, algorithms for constructing the decompositions are proposed. Constructing the decompositions turns out to be computationally hard, and the proposed algorithms are mostly based on various heuristics. Nevertheless, the algorithms are shown to be capable of finding good results in empirical experiments conducted with both synthetic and real-world data.

Mining Cell Transition Data

Cell transition data is obtained from a cellular phone that switches its current serving cell tower. The data consists of a sequence of transition events, which are pairs of cell identifiers and transition times. The focus of this thesis is applying data mining methods to such data, developing new algorithms, and extracting knowledge that will be a solid foundation on which to build location-aware applications. In addition to a thorough exploration of the features of the data, the tools and methods developed in this thesis provide solutions to three distinct research problems. First, we develop clustering algorithms that produce a reliable mapping between cell transitions and physical locations observed by users of mobile devices. The main clustering algorithm operates in online fashion, and we consider also a number of offline clustering methods for comparison. Second, we define the concept of significant locations, known as bases, and give an online algorithm for determining them. Finally, we consider the task of predicting the movement of the user, based on historical data. We develop a prediction algorithm that considers paths of movement in their entirety, instead of just the most recent movement history. All of the presented methods are evaluated with a significant body of real cell transition data, collected from about one hundred different individuals. The algorithms developed in this thesis are designed to be implemented on a mobile device, and require no extra hardware sensors or network infrastructure. By not relying on external services and keeping the user information as much as possible on the user s own personal device, we avoid privacy issues and let the users control the disclosure of their location information.

Spatial ecology of a specialist insect herbivore : the leaf-mining moth Tischeria ekebladella on the pedunculate oak Quercus robur

Herbivorous insects comprise a major part of terrestrial biodiversity, and their interactions with their host plants and natural enemies are of vast ecological importance. A large body of research demonstrates that the ecology and evolution of these insects may be affected by trophic interactions, by abiotic influences, and by intraspecific processes, but so far research on these individual aspects has rarely been combined. This thesis uses the leaf-mining moth Tischeria ekebladella and the pedunculate oak (Quercus robur) as a case study to assess how spatial variation in trophic interactions and the physical distribution of host trees jointly affect the distribution, dynamics and evolution of a host-specific herbivore. With respect to habitat quality, Tischeria ekebladella experiences abundant variation at several spatial scales. Most of this variation occurs at small scales notably among leaves and shoots within individual trees. While hypothetically this could cause moths to evolve an ability to select leaves and shoots of high quality, I did not find any coupling between female preference and offspring performance. Based on my studies on temporal variation in resource quality I therefore propose that unpredictable temporal changes in the relative rankings of individual resource units may render it difficult for females to predict the fate of their developing offspring. With respect to intraspecific processes, my results suggest that limited moth dispersal in relation to the spatial distribution of oak trees plays a key role in determining the regional distribution of Tischeria ekebladella. The distribution of the moth is aggregated at the landscape level, where local leaf miner populations are less likely to be present where oaks are scarce. A modelling exercise based on empirical dispersal estimates revealed that the moth population on Wattkast an island in south-western Finland is spatially structured overall, but that the relative importance of local and regional processes on tree-specific moth dynamics varies drastically across the landscape. To conclude, my work in the oak-Tischeria ekebladella system demonstrates that the local abundance and regional distribution of a herbivore may be more strongly influenced by the spatial location of host trees than by their relative quality. Hence, it reveals the importance of considering spatial context in the study of herbivorous insects, and forms a bridge between the classical fields of plant-insect interactions and spatial ecology.

Evaluation and modelling of the spatial and temporal variability of particulate matter in urban areas

This thesis contains three subject areas concerning particulate matter in urban area air quality: 1) Analysis of the measured concentrations of particulate matter mass concentrations in the Helsinki Metropolitan Area (HMA) in different locations in relation to traffic sources, and at different times of year and day. 2) The evolution of traffic exhaust originated particulate matter number concentrations and sizes in local street scale are studied by a combination of a dispersion model and an aerosol process model. 3) Some situations of high particulate matter concentrations are analysed with regard to their meteorological origins, especially temperature inversion situations, in the HMA and three other European cities. The prediction of the occurrence of meteorological conditions conducive to elevated particulate matter concentrations in the studied cities is examined. The performance of current numerical weather forecasting models in the case of air pollution episode situations is considered. The study of the ambient measurements revealed clear diurnal variation of the PM10 concentrations in the HMA measurement sites, irrespective of the year and the season of the year. The diurnal variation of local vehicular traffic flows seemed to have no substantial correlation with the PM2.5 concentrations, indicating that the PM10 concentrations were originated mainly from local vehicular traffic (direct emissions and suspension), while the PM2.5 concentrations were mostly of regionally and long-range transported origin. The modelling study of traffic exhaust dispersion and transformation showed that the number concentrations of particles originating from street traffic exhaust undergo a substantial change during the first tens of seconds after being emitted from the vehicle tailpipe. The dilution process was shown to dominate total number concentrations. Minimal effect of both condensation and coagulation was seen in the Aitken mode number concentrations. The included air pollution episodes were chosen on the basis of occurrence in either winter or spring, and having at least partly local origin. In the HMA, air pollution episodes were shown to be linked to predominantly stable atmospheric conditions with high atmospheric pressure and low wind speeds in conjunction with relatively low ambient temperatures. For the other European cities studied, the best meteorological predictors for the elevated concentrations of PM10 were shown to be temporal (hourly) evolutions of temperature inversions, stable atmospheric stability and in some cases, wind speed. Concerning the weather prediction during particulate matter related air pollution episodes, the use of the studied models were found to overpredict pollutant dispersion, leading to underprediction of pollutant concentration levels.

The EU and Institutional Twinning in Morocco - An inquiry into the motives of cooperation through discourse ethics

This study examines Institutional Twinning in Morocco as a case of EU cooperation through the pragmatic, ethical and moral logics of reason in Jürgen Habermas’s discourse ethics. As a former accession tool, Twinning was introduced in 2004 for legal approximation in the context of the European Neighborhood Policy. Twinning is a unique instrument in development cooperation from a legal perspective. With its long historical and cultural ties to Europe, Morocco presents an interesting case study of this new form of cooperation. We will analyse motives behind the Twinning projects on illegal immigration, environment legislation and customs reform. As Twinning is a new policy instrument within the ENP context, there is relatively little preceding research, which, in itself, constitutes a reason to inquire into the subject. While introducing useful categories, the approaches discussing “normative power Europe” do not offer methodological tools precise enough to analyse the motives of the Twinning cooperation from a broad ethical standpoint. Helene Sjursen as well as Esther Barbé and Elisabeth Johansson-Nogués have elaborated on Jürgen Habermas’ discourse ethics in determining the extent of altruism in the ENP in general. Situating the analysis in the process-oriented framework of Critical Theory, discourse ethics provides the methodological framework for our research. The case studies reveal that the context in which they operate affects the pragmatic, ethical and moral aspirations of the actors. The utilitarian notion of profit maximization is quite pronounced both in terms of the number of Twinning projects in the economic sphere and the pragmatic logics of reason instrumental to security and trade-related issues. The historical background as well internal processes, however, contribute to defining areas of mutual interest to the actors as well as the motives Morocco and the EU sometimes described as the external projection of internal values. Through its different aspects, Twinning cooperation portrays the functioning of the pragmatic, ethical and moral logics of reason in international relations.