Where and how to conserve: Extending the scope of spatial reserve network design

Ongoing habitat loss and fragmentation threaten much of the biodiversity that we know today. As such, conservation efforts are required if we want to protect biodiversity. Conservation budgets are typically tight, making the cost-effective selection of protected areas difficult. Therefore, reserve design methods have been developed to identify sets of sites, that together represent the species of conservation interest in a cost-effective manner. To be able to select reserve networks, data on species distributions is needed. Such data is often incomplete, but species habitat distribution models (SHDMs) can be used to link the occurrence of the species at the surveyed sites to the environmental conditions at these locations (e.g. climatic, vegetation and soil conditions). The probability of the species occurring at unvisited location is next predicted by the model, based on the environmental conditions of those sites. The spatial configuration of reserve networks is important, because habitat loss around reserves can influence the persistence of species inside the network. Since species differ in their requirements for network configuration, the spatial cohesion of networks needs to be species-specific. A way to account for species-specific requirements is to use spatial variables in SHDMs. Spatial SHDMs allow the evaluation of the effect of reserve network configuration on the probability of occurrence of the species inside the network. Even though reserves are important for conservation, they are not the only option available to conservation planners. To enhance or maintain habitat quality, restoration or maintenance measures are sometimes required. As a result, the number of conservation options per site increases. Currently available reserve selection tools do however not offer the ability to handle multiple, alternative options per site. This thesis extends the existing methodology for reserve design, by offering methods to identify cost-effective conservation planning solutions when multiple, alternative conservation options are available per site. Although restoration and maintenance measures are beneficial to certain species, they can be harmful to other species with different requirements. This introduces trade-offs between species when identifying which conservation action is best applied to which site. The thesis describes how the strength of such trade-offs can be identified, which is useful for assessing consequences of conservation decisions regarding species priorities and budget. Furthermore, the results of the thesis indicate that spatial SHDMs can be successfully used to account for species-specific requirements for spatial cohesion - in the reserve selection (single-option) context as well as in the multi-option context. Accounting for the spatial requirements of multiple species and allowing for several conservation options is however complicated, due to trade-offs in species requirements. It is also shown that spatial SHDMs can be successfully used for gaining information on factors that drive a species spatial distribution. Such information is valuable to conservation planning, as better knowledge on species requirements facilitates the design of networks for species persistence. This methods and results described in this thesis aim to improve species probabilities of persistence, by taking better account of species habitat and spatial requirements. Many real-world conservation planning problems are characterised by a variety of conservation options related to protection, restoration and maintenance of habitat. Planning tools therefore need to be able to incorporate multiple conservation options per site, in order to continue the search for cost-effective conservation planning solutions. Simultaneously, the spatial requirements of species need to be considered. The methods described in this thesis offer a starting point for combining these two relevant aspects of conservation planning.

Exploring Problem Decomposition in Conceptual Design

Design embraces several disciplines dedicated to the production of artifacts and services. These disciplines are quite independent and only recently has psychological interest focused on them. Nowadays, the psychological theories of design, also called design cognition literature, describe the design process from the information processing viewpoint. These models co-exist with the normative standards of how designs should be crafted. In many places there are concrete discrepancies between these two in a way that resembles the differences between the actual and ideal decision-making. This study aimed to explore the possible difference related to problem decomposition. Decomposition is a standard component of human problem-solving models and is also included in the normative models of design. The idea of decomposition is to focus on a single aspect of the problem at a time. Despite its significance, the nature of decomposition in conceptual design is poorly understood and has only been preliminary investigated. This study addressed the status of decomposition in conceptual design of products using protocol analysis. Previous empirical investigations have argued that there are implicit and explicit decomposition, but have not provided a theoretical basis for these two. Therefore, the current research began by reviewing the problem solving and design literature and then composing a cognitive model of the solution search of conceptual design. The result is a synthetic view which describes recognition and decomposition as the basic schemata for conceptual design. A psychological experiment was conducted to explore decomposition. In the test, sixteen (N=16) senior students of mechanical engineering created concepts for two alternative tasks. The concurrent think-aloud method and protocol analysis were used to study decomposition. The results showed that despite the emphasis on decomposition in the formal education, only few designers (N=3) used decomposition explicitly and spontaneously in the presented tasks, although the designers in general applied a top-down control strategy. Instead, inferring from the use of structured strategies, the designers always relied on implicit decomposition. These results confirm the initial observations found in the literature, but they also suggest that decomposition should be investigated further. In the future, the benefits and possibilities of explicit decomposition should be considered along with the cognitive mechanisms behind decomposition. After that, the current results could be reinterpreted.

Teatterinjohtamisen dramaturgiaa : Keskeiset tehtävät, arjen ongelmat ja rakenteelliset muutostarpeet

DRAMATURGY OF THEATRE MANAGEMENT Essential tasks, everyday problems and the need for structural changes Theatre justifies its existence only through high quality performances. Maintaining the artistic level and organizing performances are the primary tasks of a manager, even though in everyday life this often seems to be overshadowed by all the other tasks of a manager s work. How does a theatre manager design strategies and make everyday decisions if aims are to have artistically meaningful performances, financial success and a socially healthy ensemble, when not only artistic work or leadership of an organization are to be taken into consideration, but also a manpower-based art institution with long traditions? What does theatre management consist of and what kind of dramaturgical movement happens in it? Based on interviews carried out in five different city theatres in Finland in the years 2004-2008, incident stories were written within a continuous comparison theory frame. Social constructionism within a dramaturgic framework enabled versatile dialog on a manager s work and problem areas. The result is an interpretative study, where instead of common regularities, many details are collected that can be taken into consideration when similar situations occur. Based on the interviews and historical data, four factors that influence a manager s work were chosen: ownership, media, work community and programme. Within theatre management, the central problems were 1) the inconsistent use of theatre resources and problems in corporate governance caused by the administrative models; 2) the theatre s image, based on the image of its manager, as presented by the media and its influence on the wellbeing of the staff; 3) unsolved problems between the staff left behind by the previous managers and problems related to casting; 4) knowledge of the audience. These points influence how the manager plans the artistic programme and divides the resources. The theatre manager s job description has remained quite the same since the early days of Kaarlo Bergbom. In the future, special attention should be placed on why managers face fairly similar problems decade after decade. Reducing these problems partly depends on whether structural improvements are made to a theatre s close network of owners, financers and labour unions. During this study clear evidence was seen that structural changes are necessary in the production of performances and in the creation of a more versatile programme. In this process, different kinds of co-operation, experiments, development projects, continuing education and international relations have special importance, especially if the aim is to make it possible for all citizens of Finland to enjoy a vibrant and revitalized theatre.

Automatic Lameness Detection in a Milking Robot : Instrumentation, measurement software, algorithms for data analysis and a neural network model

The aim of this thesis is to develop a fully automatic lameness detection system that operates in a milking robot. The instrumentation, measurement software, algorithms for data analysis and a neural network model for lameness detection were developed. Automatic milking has become a common practice in dairy husbandry, and in the year 2006 about 4000 farms worldwide used over 6000 milking robots. There is a worldwide movement with the objective of fully automating every process from feeding to milking. Increase in automation is a consequence of increasing farm sizes, the demand for more efficient production and the growth of labour costs. As the level of automation increases, the time that the cattle keeper uses for monitoring animals often decreases. This has created a need for systems for automatically monitoring the health of farm animals. The popularity of milking robots also offers a new and unique possibility to monitor animals in a single confined space up to four times daily. Lameness is a crucial welfare issue in the modern dairy industry. Limb disorders cause serious welfare, health and economic problems especially in loose housing of cattle. Lameness causes losses in milk production and leads to early culling of animals. These costs could be reduced with early identification and treatment. At present, only a few methods for automatically detecting lameness have been developed, and the most common methods used for lameness detection and assessment are various visual locomotion scoring systems. The problem with locomotion scoring is that it needs experience to be conducted properly, it is labour intensive as an on-farm method and the results are subjective. A four balance system for measuring the leg load distribution of dairy cows during milking in order to detect lameness was developed and set up in the University of Helsinki Research farm Suitia. The leg weights of 73 cows were successfully recorded during almost 10,000 robotic milkings over a period of 5 months. The cows were locomotion scored weekly, and the lame cows were inspected clinically for hoof lesions. Unsuccessful measurements, caused by cows standing outside the balances, were removed from the data with a special algorithm, and the mean leg loads and the number of kicks during milking was calculated. In order to develop an expert system to automatically detect lameness cases, a model was needed. A probabilistic neural network (PNN) classifier model was chosen for the task. The data was divided in two parts and 5,074 measurements from 37 cows were used to train the model. The operation of the model was evaluated for its ability to detect lameness in the validating dataset, which had 4,868 measurements from 36 cows. The model was able to classify 96% of the measurements correctly as sound or lame cows, and 100% of the lameness cases in the validation data were identified. The number of measurements causing false alarms was 1.1%. The developed model has the potential to be used for on-farm decision support and can be used in a real-time lameness monitoring system.

Multi-user resource-sharing problem for the Internet

In this thesis we study a series of multi-user resource-sharing problems for the Internet, which involve distribution of a common resource among participants of multi-user systems (servers or networks). We study concurrently accessible resources, which for end-users may be exclusively accessible or non-exclusively. For all kinds we suggest a separate algorithm or a modification of common reputation scheme. Every algorithm or method is studied from different perspectives: optimality of protocols, selfishness of end users, fairness of the protocol for end users. On the one hand the multifaceted analysis allows us to select the most suited protocols among a set of various available ones based on trade-offs of optima criteria. On the other hand, the future Internet predictions dictate new rules for the optimality we should take into account and new properties of the networks that cannot be neglected anymore. In this thesis we have studied new protocols for such resource-sharing problems as the backoff protocol, defense mechanisms against Denial-of-Service, fairness and confidentiality for users in overlay networks. For backoff protocol we present analysis of a general backoff scheme, where an optimization is applied to a general-view backoff function. It leads to an optimality condition for backoff protocols in both slot times and continuous time models. Additionally we present an extension for the backoff scheme in order to achieve fairness for the participants in an unfair environment, such as wireless signal strengths. Finally, for the backoff algorithm we suggest a reputation scheme that deals with misbehaving nodes. For the next problem -- denial-of-service attacks, we suggest two schemes that deal with the malicious behavior for two conditions: forged identities and unspoofed identities. For the first one we suggest a novel most-knocked-first-served algorithm, while for the latter we apply a reputation mechanism in order to restrict resource access for misbehaving nodes. Finally, we study the reputation scheme for the overlays and peer-to-peer networks, where resource is not placed on a common station, but spread across the network. The theoretical analysis suggests what behavior will be selected by the end station under such a reputation mechanism.

The Most Probable Bayesian Network and Beyond

This doctoral dissertation introduces an algorithm for constructing the most probable Bayesian network from data for small domains. The algorithm is used to show that a popular goodness criterion for the Bayesian networks has a severe sensitivity problem. The dissertation then proposes an information theoretic criterion that avoids the problem.