Estimation of local forest attributes, utilizing two-phase sampling and auxiliary data

This thesis examines the feasibility of a forest inventory method based on two-phase sampling in estimating forest attributes at the stand or substand levels for forest management purposes. The method is based on multi-source forest inventory combining auxiliary data consisting of remote sensing imagery or other geographic information and field measurements. Auxiliary data are utilized as first-phase data for covering all inventory units. Various methods were examined for improving the accuracy of the forest estimates. Pre-processing of auxiliary data in the form of correcting the spectral properties of aerial imagery was examined (I), as was the selection of aerial image features for estimating forest attributes (II). Various spatial units were compared for extracting image features in a remote sensing aided forest inventory utilizing very high resolution imagery (III). A number of data sources were combined and different weighting procedures were tested in estimating forest attributes (IV, V). Correction of the spectral properties of aerial images proved to be a straightforward and advantageous method for improving the correlation between the image features and the measured forest attributes. Testing different image features that can be extracted from aerial photographs (and other very high resolution images) showed that the images contain a wealth of relevant information that can be extracted only by utilizing the spatial organization of the image pixel values. Furthermore, careful selection of image features for the inventory task generally gives better results than inputting all extractable features to the estimation procedure. When the spatial units for extracting very high resolution image features were examined, an approach based on image segmentation generally showed advantages compared with a traditional sample plot-based approach. Combining several data sources resulted in more accurate estimates than any of the individual data sources alone. The best combined estimate can be derived by weighting the estimates produced by the individual data sources by the inverse values of their mean square errors. Despite the fact that the plot-level estimation accuracy in two-phase sampling inventory can be improved in many ways, the accuracy of forest estimates based mainly on single-view satellite and aerial imagery is a relatively poor basis for making stand-level management decisions.

Keittiömaailman matkassa 20 vuotta : Tutkimus erään keittiökalustevalmistajan johtavan markkina-aseman rakentamisesta ja säilyttämisestä

A View into the World of Kitchen: Development and retention of a leading position in the market of kitchen interiors - a case study of 20 years. This study focuses on the development of a kitchen interiors company, presently called Novart Inc., into the leading company of the industry from 1980´s to the present. The objective of the study is to describe the effects of strategic choices, the decisions of the management and the owner´s direction and control to the build up and the retaining of the leading position in the market. From theory point of view, strategic choices refer to com-pany purchases as corporate-level strategies, and business and marketing strategies. The empirical research was carried out in two phases and it is based on various company documents and records, and on the intensive interviews of seven key executives in the company. An abductive research design was utilized. The company gained the leading position in the kitchen market in Finland by company purchases, and the company has been able to retain the position. Firstly the goal was to expand to retail market and, secondly, the company has maintained the balance of supply and demand by closing the purchased production units when needed. The simultaneous use of these two strategic goals is a kind of a new observation, and the strategy may be suitable only for market leaders. During the latter part of the research period the strategy of com-pany purchases has been abandoned and the leading position in the market has been main-tained by developing systematically business and marketing capability. In the business and marketing strategies the distribution channels and the brands have been emphasized. During the research period the company has almost totally abandoned the long distribution channels and started to use its own channels built and named after the main brands. These are A la Carte, Parma and Petra. At the moment, in the beginning of the 21st century, a new distribution channel, the concept of the Kitchen World, is being built in addition to the channels mentioned above. The management´s decision making and the implementation the decisions have been well-considered. The executives emphasized the valuing of the importance of the decisions dif-ferently except the two decisions named the most important ones, i.e., the decisions to start own production of the raw material and to concentrate the business only to one company. The executive staff has also succeeded in managing crisis and threats of bankruptcy, and the company has been managed profitable. During all the four terms of ownership: Puolimatka Corporation, the Hankkija/Novera Corporation, the ownership period of the "bank", and the Nobia Corporate the ownership direction and control has been somewhat different. All the owners have paid attention to economic issues. The direction of cash flows and investments was at its strongest during the Hankkija/Novera term. For the last owner Nobia the production and marketing of the kitchen interiors has been the core business, which thus has strengthened the business and marketing capabilities of the target company of this research. A common denominator during all the four terms of ownership has been owners' trust gained by the professional skills of the management of the target company. This has lead to greater independence of the management of the company and less owners´ direction. Keywords: leading position, marketing strategy, management decisions, acquisition, corporate governance

The community of medium-sized carnivores: the interactions between species, habitats and rabies

The composition of the carnivore community influences the different forms of inter-specific interactions. Furthermore, inter-specific interactions of carnivores have important implications for intra-guild competition, epidemiology and strategies of species-specific population management. Zoonooses, such as rabies, are diseases that can be transmitted from wildlife to people. Knowing the ecological characteristics of the species helps us to choose the right preventive actions and to time them accurately. In this thesis, I have studied how raccoon dogs Nyctereutes procyonoides, European badgers Meles meles, red foxes Vulpes vulpes and domestic cats Felis silvestris catus act as members of carnivore community, and how these interactions relate to the transmission risk of rabies. In the study area, these species form a community of medium-sized and rather generalist predators. They live in the same areas, in spatially and temporally overlapping home ranges and use the same habitats and dens and even have similar diets. However, there is no direct evidence of competition. Shared dens point to good tolerance of other species. Numerous observations of animals moving in each other’s proximity give similar clues. However, overlapping home ranges and similar habitat preferences lead to frequent inter-specific contacts, which increase the risk of possible rabies transmission. Also, the new insight of habitat use gained by this study illustrates the similar favouring of deciduous forests and fields by these sympatric medium-sized carnivores, creating a basis for contact zones, i.e. risky habitats for rabies transmission and spread. This study is so far the only simultaneous radio tracking study of raccoon dogs, badgers, foxes and cats. These results give new insight of the interactions in the carnivore community, as well as of the behaviour of each individual species. Also, these results have significant implications for the planning of rabies control. In order to reach viable management decisions, not only one or two species should be taken into consideration, but the whole community. In particular, this changes the perspective to inter-specific contacts, animal densities, densities of individuals susceptible to diseases and the magnitude of preventive actions. Rabies should be considered as a multi-vector disease, at least in Finland and the Baltic states. It is of interest for disease management to be able to model an epizootic with local parameters to reflect the real situation and also to suite best the local management needs.

Silvicultural decisions based on simulation-optimization systems

Forest management is facing new challenges under climate change. By adjusting thinning regimes, conventional forest management can be adapted to various objectives of utilization of forest resources, such as wood quality, forest bioenergy, and carbon sequestration. This thesis aims to develop and apply a simulation-optimization system as a tool for an interdisciplinary understanding of the interactions between wood science, forest ecology, and forest economics. In this thesis, the OptiFor software was developed for forest resources management. The OptiFor simulation-optimization system integrated the process-based growth model PipeQual, wood quality models, biomass production and carbon emission models, as well as energy wood and commercial logging models into a single optimization model. Osyczka s direct and random search algorithm was employed to identify optimal values for a set of decision variables. The numerical studies in this thesis broadened our current knowledge and understanding of the relationships between wood science, forest ecology, and forest economics. The results for timber production show that optimal thinning regimes depend on site quality and initial stand characteristics. Taking wood properties into account, our results show that increasing the intensity of thinning resulted in lower wood density and shorter fibers. The addition of nutrients accelerated volume growth, but lowered wood quality for Norway spruce. Integrating energy wood harvesting into conventional forest management showed that conventional forest management without energy wood harvesting was still superior in sparse stands of Scots pine. Energy wood from pre-commercial thinning turned out to be optimal for dense stands. When carbon balance is taken into account, our results show that changing carbon assessment methods leads to very different optimal thinning regimes and average carbon stocks. Raising the carbon price resulted in longer rotations and a higher mean annual increment, as well as a significantly higher average carbon stock over the rotation.

A dynamic programming model for optimising feeding and slaughter decisions regarding fattening pigs

Costs of purchasing new piglets and of feeding them until slaughter are the main variable expenditures in pig fattening. They both depend on slaughter intensity, the nature of feeding patterns and the technological constraints of pig fattening, such as genotype. Therefore, it is of interest to examine the effect of production technology and changes in input and output prices on feeding and slaughter decisions. This study examines the problem by using a dynamic programming model that links genetic characteristics of a pig to feeding decisions and the timing of slaughter and takes into account how these jointly affect the quality-adjusted value of a carcass. The model simulates the growth mechanism of a pig under optional feeding and slaughter patterns and then solves the optimal feeding and slaughter decisions recursively. The state of nature and the genotype of a pig are known in the analysis. The main contribution of this study is the dynamic approach that explicitly takes into account carcass quality while simultaneously optimising feeding and slaughter decisions. The method maximises the internal rate of return to the capacity unit. Hence, the results can have vital impact on competitiveness of pig production, which is known to be quite capital-intensive. The results suggest that producer can significantly benefit from improvements in the pig's genotype, because they improve efficiency of pig production. The annual benefits from obtaining pigs of improved genotype can be more than €20 per capacity unit. The annual net benefits of animal breeding to pig farms can also be considerable. Animals of improved genotype can reach optimal slaughter maturity quicker and produce leaner meat than animals of poor genotype. In order to fully utilise the benefits of animal breeding, the producer must adjust feeding and slaughter patterns on the basis of genotype. The results suggest that the producer can benefit from flexible feeding technology. The flexible feeding technology segregates pigs into groups according to their weight, carcass leanness, genotype and sex and thereafter optimises feeding and slaughter decisions separately for these groups. Typically, such a technology provides incentives to feed piglets with protein-rich feed such that the genetic potential to produce leaner meat is fully utilised. When the pig approaches slaughter maturity, the share of protein-rich feed in the diet gradually decreases and the amount of energy-rich feed increases. Generally, the optimal slaughter weight is within the weight range that pays the highest price per kilogram of pig meat. The optimal feeding pattern and the optimal timing of slaughter depend on price ratios. Particularly, an increase in the price of pig meat provides incentives to increase the growth rates up to the pig's biological maximum by increasing the amount of energy in the feed. Price changes and changes in slaughter premium can also have large income effects. Key words: barley, carcass composition, dynamic programming, feeding, genotypes, lean, pig fattening, precision agriculture, productivity, slaughter weight, soybeans

From trading to eCommunity management

"The increasing pressure for enterprises to join into agile business networks is changing the requirements on the enterprise computing systems. The supporting infrastructure is increasingly required to provide common facilities and societal infrastructure services to support the lifecycle of loosely-coupled, eContract-governed business networks. The required facilities include selection of those autonomously administered business services that the enterprises are prepared to provide and use, contract negotiations, and furthermore, monitoring of the contracted behaviour with potential for breach management. The essential change is in the requirement of a clear mapping between business-level concepts and the automation support for them. Our work has focused on developing B2B middleware to address the above challenges; however, the architecture is not feasible without management facilities for trust-aware decisions for entering business networks and interacting within them. This paper discusses how trust-based decisions are supported and positioned in the B2B middleware."

Customer asset management in action: using customers portfolio for allocating resources across business-to-business relationships for improved shareholder value

Suvi Nenonen Customer asset management in action: using customer portfolios for allocating resources across business-to-business relationships for improved shareholder value Customers are crucial assets to all firms as customers are the ultimate source of all cash flows. Regardless this financial importance of customer relationships, for decades there has been a lack of suitable frameworks explaining how customer relationships contribute to the firm financial performance and how this contribution can be actively managed. In order to facilitate a better understanding of the customer asset, contemporary marketing has investigated the use of financial theories and asset management practices in the customer relationship context. Building on this, marketing academics have promoted the customer lifetime value concept as a solution for valuating and managing customer relationships for optimal financial outcomes. However, the empirical investigation of customer asset management lags behind the conceptual development steps taken. Additionally, the practitioners have not embraced the use of customer lifetime value in guiding managerial decisions - especially in the business-to-business context. The thesis points out that there are fundamental differences between customer relationships and investment instruments as investment targets, effectively eliminating the possibility to use financial theories in a customer relationships context or to optimize the customer base as a single investment portfolio. As an alternative, the thesis proposes the use of customer portfolio approach for allocating resources across the customer base for improved shareholder value. In the customer portfolio approach, the customer base of a firm is divided into multiple portfolios based on customer relationships’ potential to contribute to the shareholder value creation. After this, customer management concepts are tailored to each customer portfolio, designed to improve the shareholder value in their own respect. Therefore, effective customer asset management with the customer portfolio approach necessitates that firms are able to manage multiple parallel customer management concepts, or business models, simultaneously. The thesis is one of the first empirical studies on customer asset management, bringing empirical evidence from multiple business-to-business case studies on how customer portfolio models can be formed, how customer portfolios can be managed, and how customer asset management has contributed to the firm financial performance.

Customer asset management in action: using customers portfolio for allocating resources across business-to-business relationships for improved shareholder value

Suvi Nenonen Customer asset management in action: using customer portfolios for allocating resources across business-to-business relationships for improved shareholder value Customers are crucial assets to all firms as customers are the ultimate source of all cash flows. Regardless this financial importance of customer relationships, for decades there has been a lack of suitable frameworks explaining how customer relationships contribute to the firm financial performance and how this contribution can be actively managed. In order to facilitate a better understanding of the customer asset, contemporary marketing has investigated the use of financial theories and asset management practices in the customer relationship context. Building on this, marketing academics have promoted the customer lifetime value concept as a solution for valuating and managing customer relationships for optimal financial outcomes. However, the empirical investigation of customer asset management lags behind the conceptual development steps taken. Additionally, the practitioners have not embraced the use of customer lifetime value in guiding managerial decisions - especially in the business-to-business context. The thesis points out that there are fundamental differences between customer relationships and investment instruments as investment targets, effectively eliminating the possibility to use financial theories in a customer relationships context or to optimize the customer base as a single investment portfolio. As an alternative, the thesis proposes the use of customer portfolio approach for allocating resources across the customer base for improved shareholder value. In the customer portfolio approach, the customer base of a firm is divided into multiple portfolios based on customer relationships’ potential to contribute to the shareholder value creation. After this, customer management concepts are tailored to each customer portfolio, designed to improve the shareholder value in their own respect. Therefore, effective customer asset management with the customer portfolio approach necessitates that firms are able to manage multiple parallel customer management concepts, or business models, simultaneously. The thesis is one of the first empirical studies on customer asset management, bringing empirical evidence from multiple business-to-business case studies on how customer portfolio models can be formed, how customer portfolios can be managed, and how customer asset management has contributed to the firm financial performance.

The Impact of New Capital Requirements on the Portfolio Decisions of Finnish Pension Institutions

This paper examines the potential impact of new capital requirements on asset allocations of Finnish pension institutions. We describe the new requirements and consider portfolio construction to minimize regulatory capital, given the investor’s preferred level of expected return. Results identify portfolio transactions that enhance expected return without increasing capital needs. Regulation calls for portfolio diversification and prudence in management, but this paper shows that market participants can exploit inconsistencies in regulation. Possible future consequences include capital outflows from the pension system and an unintended decrease in pre-funding of old-age pensions.

Inventory Routing - A Strategic Management Accounting Perspective

This dissertation develops a strategic management accounting perspective of inventory routing. The thesis studies the drivers of cost efficiency gains by identifying the role of the underlying cost structure, demand, information sharing, forecasting accuracy, service levels, vehicle fleet, planning horizon and other strategic factors as well as the interaction effects among these factors with respect to performance outcomes. The task is to enhance the knowledge of the strategic situations that favor the implementation of inventory routing systems, understanding cause-and-effect relationships, linkages and gaining a holistic view of the value proposition of inventory routing. The thesis applies an exploratory case study design, which is based on normative quantitative empirical research using optimization, simulation and factor analysis. Data and results are drawn from a real world application to cash supply chains. The first research paper shows that performance gains require a common cost component and cannot be explained by simple linear or affine cost structures. Inventory management and distribution decisions become separable in the absence of a set-dependent cost structure, and neither economies of scope nor coordination problems are present in this case. The second research paper analyzes whether information sharing improves the overall forecasting accuracy. Analysis suggests that the potential for information sharing is limited to coordination of replenishments and that central information do not yield more accurate forecasts based on joint forecasting. The third research paper develops a novel formulation of the stochastic inventory routing model that accounts for minimal service levels and forecasting accuracy. The developed model allows studying the interaction of minimal service levels and forecasting accuracy with the underlying cost structure in inventory routing. Interestingly, results show that the factors minimal service level and forecasting accuracy are not statistically significant, and subsequently not relevant for the strategic decision problem to introduce inventory routing, or in other words, to effectively internalize inventory management and distribution decisions at the supplier. Consequently the main contribution of this thesis is the result that cost benefits of inventory routing are derived from the joint decision model that accounts for the underlying set-dependent cost structure rather than the level of information sharing. This result suggests that the value of information sharing of demand and inventory data is likely to be overstated in prior literature. In other words, cost benefits of inventory routing are primarily determined by the cost structure (i.e. level of fixed costs and transportation costs) rather than the level of information sharing, joint forecasting, forecasting accuracy or service levels.

Non-industrial private forest landowners’ choices of timber management strategies.

The factors affecting the non-industrial, private forest landowners' (hereafter referred to using the acronym NIPF) strategic decisions in management planning are studied. A genetic algorithm is used to induce a set of rules predicting potential cut of the landowners' choices of preferred timber management strategies. The rules are based on variables describing the characteristics of the landowners and their forest holdings. The predictive ability of a genetic algorithm is compared to linear regression analysis using identical data sets. The data are cross-validated seven times applying both genetic algorithm and regression analyses in order to examine the data-sensitivity and robustness of the generated models. The optimal rule set derived from genetic algorithm analyses included the following variables: mean initial volume, landowner's positive price expectations for the next eight years, landowner being classified as farmer, and preference for the recreational use of forest property. When tested with previously unseen test data, the optimal rule set resulted in a relative root mean square error of 0.40. In the regression analyses, the optimal regression equation consisted of the following variables: mean initial volume, proportion of forestry income, intention to cut extensively in future, and positive price expectations for the next two years. The R2 of the optimal regression equation was 0.34 and the relative root mean square error obtained from the test data was 0.38. In both models, mean initial volume and positive stumpage price expectations were entered as significant predictors of potential cut of preferred timber management strategy. When tested with the complete data set of 201 observations, both the optimal rule set and the optimal regression model achieved the same level of accuracy.