Glycoalkaloid Content and Starch Structure in Solanum Species and Interspecific Somatic Potato Hybrids

When genome sections of wild Solanum species are bred into the cultivated potato (S. tuberosum L.) to obtain improved potato cultivars, the new cultivars must be evaluated for their beneficial and undesirable traits. Glycoalkaloids present in Solanum species are known for their toxic as well as for beneficial effects on mammals. On the other hand, glycoalkaloids in potato leaves provide natural protection against pests. Due to breeding, glycoalkaloid profile of the plant is affected. In addition, the starch properties in potato tubers can be affected as a result of breeding, because the crystalline properties are determined by the botanical source of the starch. Starch content and composition affect the texture of cooked and processed potatoes. In order to determine glycoalkaloid contents in Solanum species, simultaneous separation of glycoalkaloids and aglycones using reversed-phase high-performance liquid chromatography (HPLC) was developed. Clean-up of foliage samples was improved using a silica-based strong cation exchanger instead of octadecyl phases in solid-phase extraction. Glycoalkaloids alpha-solanine and alpha-chaconine were detected in potato tubers of cvs. Satu and Sini. The total glycoalkaloid concentration of non-peeled and immature tubers was at an acceptable level (under 20 mg/100 g of FW) in the cv. Satu, whereas concentration in cv. Sini was 23 mg/100 g FW. Solanum species (S. tuberosum, S. brevidens, S. acaule, and S. commersonii) and interspecific somatic hybrids (brd + tbr, acl + tbr, cmm + tbr) were analyzed for their glycoalkaloid contents using liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS). The concentrations in the tubers of the brd + tbr and acl + tbr hybrids remained under 20 mg/100 g FW. Glycoalkaloid concentration in the foliage of the Solanum species was between 110 mg and 890 mg/100 g FW. However, the concentration in the foliage of S. acaule was as low as 26 mg/100 g FW. The total concentrations of brd + tbr, acl + tbr, and cmm + tbr hybrid foliages were 88 mg, 180 mg, and 685 mg/100 g FW, respectively. Glycoalkaloids of both parental plants as well as new combinations of aglycones and saccharides were detected in somatic hybrids. The hybrids contained mainly spirosolanes, and glycoalkaloid structures having no 5,6-double bond in the aglycone. Based on these results, the glycoalkaloid profiles of the hybrids may represent a safer and more beneficial spectrum of glycoalkaloids than that found in currently cultivated varieties. Starch nanostructure of three different cultivars (Satu, Saturna, and Lady Rosetta), a wild species S. acaule, and interspecific somatic hybrids were examined by wide-angle and small-angle X-ray scattering (WAXS, SAXS). For the first time, the measurements were conducted on fresh potato tuber samples. Crystallinity of starch, average crystallite size, and lamellar distance were determined from the X-ray patterns. No differences in the starch nanostructure between the three different cultivars were detected. However, tuber immaturity was detected by X-ray scattering methods when large numbers of immature and mature samples were measured and the results were compared. The present study shows that no significant changes occurred in the nanostructures of starches resulting from hybridizations of potato cultivars.

Measuring attitudes in translation: a study of Nokia business reports

Background Contemporary Finnish, spoken and written, reveals loanwords or foreignisms in the form of hybrids: a mixture of Finnish and foreign syllables (alumiinivalua). Sometimes loanwords are inserted into the Finnish sentence in their raw form just as they are found in the source language (pulp, after sales palvelu). Again, sometimes loanwords are calques, which appear Finnish but are spelled and pronounced in an altogether foreign manner (Protomanageri, Promenadi kampuksella). Research Questions What role does Finnish business translation play in the migration of foreignisms into Finnish if we consider translation "as a construct of solutions determined by the ideological constraints and conflicts characterizing the target culture" (Robyns 1992: 212)? What attitudes do the Finns display toward the presence of foreignisms in their language? What socio-economic or ideological conditions (Bassnett 1994: 321) are responsible for these attitudes? Are these conditions dynamic? What tools can be used to measure such attitudes? This dissertation set out to answer these and similar questions. Attitudes are imperialist (where otherness is both denied and transformed), defensive (where otherness is acknowledged, transformed, and vilified), transdiscursive (a neutral attitude to both otherness and transformation), or finally defective (where alien migration is acknowledged and "stimulated") (Robyns 1994: 60). Methodology The research method follows Rose's schema (1984: 8): (a) take an existing theory, (b) develop from it a proposition specific enough to be tested, (c) devise a scheme that tests this proposition, (d) carry through the scheme in practice, (e) draw up results and discuss conclusions in relation to the original theory. In other words, the method attempts an explanation of a Finnish social phenomenon based on systematic analyses of translated evidence (Lewins 1992: 4) whereby what really matters is the logical sequence that connects the empirical data to the initial research questions raised above and, ultimately to its conclusion (Yin 1984: 29). Results This research found that Finnish translators of the Nokia annual reports used a foreignism whenever possible such as komponentin instead of rakenneosa, or investoida instead of sijoittaa, and often without any apparent justification (Pryce 2003: 203-12) more than the translator's personal preference. In the old documents (minutes of meetings of the Board of Directors of Osakeyhtio H. Saastamoinen, Ltd. dated 5 July 1912-1917, a NOPSA booklet (1932), Enzo-Gutzeit-Tornator Oy document (1938), Imatra Steel Oy Annual Report 1964, and Nokia Oy Annual Report 1946), foreignisms under Haugen's (1950: 210-31) Classification #1 occurred an average of 0.6 times, while in the new documents (Nokia 1998 translated Annual Reports) they occurred an average of 6.5 times. That big difference, suggests transdiscursive and defective attitudes in Finnish society toward the other. In the 1850s, Finnish attitudes toward alien persons and cultures were hardened, intolerant and prohibitive because language politics were both nascent and emerging, and Finns adopted a defensive stance (Paloposki 2002: 102 ff) to protect their cultural and national treasures such as language and folklore. Innovation The innovation here is that no prior doctoral level research measured Finnish attitudes toward foreignisms using a business translation approach. This is the first time that Haugen's classification has been modified and applied in target language analysis. It is hoped that this method would be replicated in similar research in the future. Applications For practical applications, researchers with interest in languages, language development, language influences, language ideologies, and power structures that affect national language policies will find this thesis useful, especially the model for collecting, grouping, and analyzing foreignisms that has been demonstrated here. It is intended to document for posterity current attitudes of Finns toward the other as revealed in business translations from 1912-1964, and in 1998. This way, future language researchers would be able to explore a time-line of Finnish language development and attitudes toward the other. Communication firms may also find this research interesting. In future, could the model we adopted be used to analyze literary texts or religious texts for example? Future Trends Though business documents show transdiscursive attitudes, other segments of Finnish society may show defensive or imperialist attitudes. When the ideology of industrialization changes in the future, will Finnish attitudes toward the other change as well? Will it then be possible to use the same kind of analytical tools to measure Finnish attitudes? More broadly, will linguistic change continue in the same direction of transdiscursive attitudes, or will the change slow down or even reverse into xenophobic attitudes? Is this our model culture-specific or can it be used in the context of other cultures? Conclusion There is anger against foreignisms in Finland as newspaper publications and television broadcasts show, but research shows that a majority of Finns consider foreignisms and the languages from which they come as sources of enrichment for Finnish culture (Laitinen 2000, Eurobarometer series 41 of July 1994, 44 of Spring 1996, 50 of Autumn 1998). Ideologies of industrialization and globalization in Finland have facilitated transdiscursive tendencies. When Finland's political ideology was intolerant toward foreign influences in the 1850s because Finland was in the process of consolidating her nascent country and language, attitudes toward the importation of loanwords also became intolerant. Presently, when industrialization and globalization became the dominant ideologies, we see a shift in attitudes toward transdiscursive tendencies. Ideology is usually unseen and too often ignored by translation researchers. However, ideology reveals itself as the most powerful factor affecting language attitudes in a target culture. Key words Finnish, Business Translation, Ideology, Foreignisms, Imperialist Attitudes, Defensive Attitudes, Transdiscursive Attitudes, Defective Attitudes, the Other, Old Documents, New Documents.

Target Cell Topography and Cytoskeletal Reorganization in Natural Killer Cell Activity

The immune system has to recognize and destroy abnormal or infected cells to maintain homeostasis. Natural killer (NK) cells directly recognize and kill transformed or virus-infected cells without prior sensitization. We have studied both virus-infected and tumor cells in order to identify the target structures involved in triggering NK activity. Mouse/human cell hybrids containing various human chromosomes were used as targets. The human chromosome responsible for activating NK cell killing was identified to chromosome number 6. The results suggest that activated NK cells recognize ligands that are encoded on human chromosome 6. We showed that the ligand on the target cell side was intercellular adhesion molecule 2 (ICAM-2). There was no difference in the level of expression of ICAM-2, however, but a drastic difference was seen in the distribution of the molecule: ICAM-2 was evenly distributed on the surface of the NK-resistant cells, but almost totally redistributed to the tip of uropods, bud-like extensions, which were absent from the parental cells. Interestingly, the gene coding for cytoskeletal linker protein ezrin has been localized to human chromosome 6, and there was a colocalization of ezrin and ICAM-2 in the uropods. Furthermore, the transfected human ezrin into NK cell-resistant cells induced uropod formation, ICAM-2 and ezrin redistribution to newly formed uropods, and sensitized target cells to NK cell killing. These data reveal a novel form of NK cell recognition: target structures are already present on normal cells; they become detectable only after abnormal redistribution into hot spots on the target cell membrane. NK cells are central players in the defence against virus infections. They inhibit the spread of infection, allowing time for specific immune responses to develop. The virus-proteins that directly activate human NK cell killing are largely unknown. We studied the sensitivity of virus-specific early proteins of Semliki Forest virus (SFV) to NK killing. The viral non-structural proteins (nsP1-4) translated early in the virus cycle were transfected in NK-resistant cells. Viral early gene nsP1 alone efficiently sensitized target cells to NK activity, and the tight membrane association of nsP1 seems to be critical in the triggering of NK killing. NsP1 protein colocalized with (redistributed) ezrin in filopodia-like structures to which the NK cells were bound. The results suggest that also in viral infections NK cells react to rapid changes in membrane topography. Based on the results of this thesis, a new model of target cell recognition of NK cells can be suggested: reorganization of the cytoskeleton induces alterations in cell surface topography, and this new pattern of surface molecules is recognized as "altered-self".

Quality of ALICE SSD modules revealed by electrical tests

ALICE (A Large Ion Collider Experiment) is an experiment at CERN (European Organization for Nuclear Research), where a heavy-ion detector is dedicated to exploit the unique physics potential of nucleus-nucleus interactions at LHC (Large Hadron Collider) energies. In a part of that project, 716 so-called type V4 modules were assembles in Detector Laboratory of Helsinki Institute of Physics during the years 2004 - 2006. Altogether over a million detector strips has made this project the most massive particle detector project in the science history of Finland. One ALICE SSD module consists of a double-sided silicon sensor, two hybrids containing 12 HAL25 front end readout chips and some passive components, such has resistors and capacitors. The components are connected together by TAB (Tape Automated Bonding) microcables. The components of the modules were tested in every assembly phase with comparable electrical tests to ensure the reliable functioning of the detectors and to plot the possible problems. The components were accepted or rejected by the limits confirmed by ALICE collaboration. This study is concentrating on the test results of framed chips, hybrids and modules. The total yield of the framed chips is 90.8%, hybrids 96.1% and modules 86.2%. The individual test results have been investigated in the light of the known error sources that appeared during the project. After solving the problems appearing during the learning-curve of the project, the material problems, such as defected chip cables and sensors, seemed to induce the most of the assembly rejections. The problems were typically seen in tests as too many individual channel failures. Instead, the bonding failures rarely caused the rejections of any component. One sensor type among three different sensor manufacturers has proven to have lower quality than the others. The sensors of this manufacturer are very noisy and their depletion voltage are usually outside of the specification given to the manufacturers. Reaching 95% assembling yield during the module production demonstrates that the assembly process has been highly successful.

Gene flow from transgenic plant populations: models and applications for risk assessment

The future use of genetically modified (GM) plants in food, feed and biomass production requires a careful consideration of possible risks related to the unintended spread of trangenes into new habitats. This may occur via introgression of the transgene to conventional genotypes, due to cross-pollination, and via the invasion of GM plants to new habitats. Assessment of possible environmental impacts of GM plants requires estimation of the level of gene flow from a GM population. Furthermore, management measures for reducing gene flow from GM populations are needed in order to prevent possible unwanted effects of transgenes on ecosystems. This work develops modeling tools for estimating gene flow from GM plant populations in boreal environments and for investigating the mechanisms of the gene flow process. To describe spatial dimensions of the gene flow, dispersal models are developed for the local and regional scale spread of pollen grains and seeds, with special emphasis on wind dispersal. This study provides tools for describing cross-pollination between GM and conventional populations and for estimating the levels of transgenic contamination of the conventional crops. For perennial populations, a modeling framework describing the dynamics of plants and genotypes is developed, in order to estimate the gene flow process over a sequence of years. The dispersal of airborne pollen and seeds cannot be easily controlled, and small amounts of these particles are likely to disperse over long distances. Wind dispersal processes are highly stochastic due to variation in atmospheric conditions, so that there may be considerable variation between individual dispersal patterns. This, in turn, is reflected to the large amount of variation in annual levels of cross-pollination between GM and conventional populations. Even though land-use practices have effects on the average levels of cross-pollination between GM and conventional fields, the level of transgenic contamination of a conventional crop remains highly stochastic. The demographic effects of a transgene have impacts on the establishment of trangenic plants amongst conventional genotypes of the same species. If the transgene gives a plant a considerable fitness advantage in comparison to conventional genotypes, the spread of transgenes to conventional population can be strongly increased. In such cases, dominance of the transgene considerably increases gene flow from GM to conventional populations, due to the enhanced fitness of heterozygous hybrids. The fitness of GM plants in conventional populations can be reduced by linking the selectively favoured primary transgene to a disfavoured mitigation transgene. Recombination between these transgenes is a major risk related to this technique, especially because it tends to take place amongst the conventional genotypes and thus promotes the establishment of invasive transgenic plants in conventional populations.

Central Diffraction at ALICE

The ALICE experiment is shown to be well suited for studies of exclusive final states from central diffractive reactions. The gluon-rich environment ofthe central system allows detailed QCD studies and searches for exotic mesonstates, such as glueballs, hybrids and new charmonium-like states. It wouldalso provide a good testing ground for detailed studies of heavy quarkonia. Dueto its central barrel performance, ALICE can accurately measure the low-masscentral systems with good purity. The efficiency of the Forward MultiplicityDetector (FMD) and the Forward Shower Counter (FSC) system for detectingrapidity gaps is shown to be adequate for the proposed studies. With thisdetector arrangement, valuable new data can be obtained by tagging centraldiffractive processes.

Constructing a Community : Myths and Realities of the Open Development Model

The open development model of software production has been characterized as the future model of knowledge production and distributed work. Open development model refers to publicly available source code ensured by an open source license, and the extensive and varied distributed participation of volunteers enabled by the Internet. Contemporary spokesmen of open source communities and academics view open source development as a new form of volunteer work activity characterized by hacker ethic and bazaar governance . The development of the Linux operating system is perhaps the best know example of such an open source project. It started as an effort by a user-developer and grew quickly into a large project with hundreds of user-developer as contributors. However, in hybrids , in which firms participate in open source projects oriented towards end-users, it seems that most users do not write code. The OpenOffice.org project, initiated by Sun Microsystems, in this study represents such a project. In addition, the Finnish public sector ICT decision-making concerning open source use is studied. The purpose is to explore the assumptions, theories and myths related to the open development model by analysing the discursive construction of the OpenOffice.org community: its developers, users and management. The qualitative study aims at shedding light on the dynamics and challenges of community construction and maintenance, and related power relations in hybrid open source, by asking two main research questions: How is the structure and membership constellation of the community, specifically the relation between developers and users linguistically constructed in hybrid open development? What characterizes Internet-mediated virtual communities and how can they be defined? How do they differ from hierarchical forms of knowledge production on one hand and from traditional volunteer communities on the other? The study utilizes sociological, psychological and anthropological concepts of community for understanding the connection between the real and the imaginary in so-called virtual open source communities. Intermediary methodological and analytical concepts are borrowed from discourse and rhetorical theories. A discursive-rhetorical approach is offered as a methodological toolkit for studying texts and writing in Internet communities. The empirical chapters approach the problem of community and its membership from four complementary points of views. The data comprises mailing list discussion, personal interviews, web page writings, email exchanges, field notes and other historical documents. The four viewpoints are: 1) the community as conceived by volunteers 2) the individual contributor s attachment to the project 3) public sector organizations as users of open source 4) the community as articulated by the community manager. I arrive at four conclusions concerning my empirical studies (1-4) and two general conclusions (5-6). 1) Sun Microsystems and OpenOffice.org Groupware volunteers failed in developing necessary and sufficient open code and open dialogue to ensure collaboration thus splitting the Groupware community into volunteers we and the firm them . 2) Instead of separating intrinsic and extrinsic motivations, I find that volunteers unique patterns of motivations are tied to changing objects and personal histories prior and during participation in the OpenOffice.org Lingucomponent project. Rather than seeing volunteers as a unified community, they can be better understood as independent entrepreneurs in search of a collaborative community . The boundaries between work and hobby are blurred and shifting, thus questioning the usefulness of the concept of volunteer . 3) The public sector ICT discourse portrays a dilemma and tension between the freedom to choose, use and develop one s desktop in the spirit of open source on one hand and the striving for better desktop control and maintenance by IT staff and user advocates, on the other. The link between the global OpenOffice.org community and the local end-user practices are weak and mediated by the problematic IT staff-(end)user relationship. 4) Authoring community can be seen as a new hybrid open source community-type of managerial practice. The ambiguous concept of community is a powerful strategic tool for orienting towards multiple real and imaginary audiences as evidenced in the global membership rhetoric. 5) The changing and contradictory discourses of this study show a change in the conceptual system and developer-user relationship of the open development model. This change is characterized as a movement from hacker ethic and bazaar governance to more professionally and strategically regulated community. 6) Community is simultaneously real and imagined, and can be characterized as a runaway community . Discursive-action can be seen as a specific type of online open source engagement. Hierarchies and structures are created through discursive acts. Key words: Open Source Software, open development model, community, motivation, discourse, rhetoric, developer, user, end-user