Ultrasound-assisted surface engineering of pharmaceutical powders

Effective processing of powdered particles can facilitate powder handling and result in better drug product performance, which is of great importance in the pharmaceutical industry where the majority of active pharmaceutical ingredients (APIs) are delivered as solid dosage forms. The purpose of this work was to develop a new ultrasound-assisted method for particle surface modification and thin-coating of pharmaceutical powders. The ultrasound was used to produce an aqueous mist with or without a coating agent. By using the proposed technique, it was possible to decrease the interparticular interactions and improve rheological properties of poorly-flowing water-soluble powders by aqueous smoothing of the rough surfaces of irregular particles. In turn, hydrophilic polymer thin-coating of a hydrophobic substance diminished the triboelectrostatic charge transfer and improved the flowability of highly cohesive powder. To determine the coating efficiency of the technique, the bioactive molecule β-galactosidase was layered onto the surface of powdered lactose particles. Enzyme-treated materials were analysed by assaying the quantity of the reaction product generated during enzymatic cleavage of the milk sugar. A near-linear increase in the thickness of the drug layer was obtained during progressive treatment. Using the enzyme coating procedure, it was confirmed that the ultrasound-assisted technique is suitable for processing labile protein materials. In addition, this pre-treatment of milk sugar could be used to improve utilization of lactose-containing formulations for populations suffering from severe lactose intolerance. Furthermore, the applicability of the thin-coating technique for improving homogeneity of low-dose solid dosage forms was shown. The carrier particles coated with API gave rise to uniform distribution of the drug within the powder. The mixture remained homogeneous during further tabletting, whereas the reference physical powder mixture was subject to segregation. In conclusion, ultrasound-assisted surface engineering of pharmaceutical powders can be effective technology for improving formulation and performance of solid dosage forms such as dry powder inhalers (DPI) and direct compression products.

Teknillisen korkeakoulun konetekniikan osaston opettajien ja opiskelijoiden kokemukset oppimisen arvioinnista ja palautteesta

Objectives. The purpose of this study was to examine perceptions of evaluation of learning and feedback among teachers and students of mechanical engineering at the Helsinki University of Technology. The differences and similarities between the perceptions of these two groups were also studied. Course feedback was examined, and a target was set to rationalize the collation and exploitation of the feedback data. The theoretical background for the evaluation of learning was based primarily on the theories of Brown (1997), Karjalainen (2001) and Rowntree (1977, 1988). The Biggs (2003) model on aligned teaching was used as an example of quality university education. Feedback practices were examined through the theory of Ramsden (1992) and many recent research articles. Methods. The qualitative study was executed by examining the evaluation of learning and feedback prac-tices of the courses in mechanical engineering at the Helsinki University of Technology. The data was gathered by interviewing the teachers responsible of basic and postgraduate studies, as well as students taking their basic studies. Four group interviews were arranged for both teachers and students, each with three participants. The data from these themed interviews were analyzed by means of content analysis. Result and conclusions. This study showed that teachers and students have similar perceptions of evalua-tion of learning and feedback excluding a few significant differences. The most essential difference in evaluation of learning was that students perceived the evaluation of the examinations to be inaccurate. Teachers on the other hand thought that the existing practice for the exam evaluation is working fine. Stu-dents also felt that they are not giving enough information on the opportunities to get feedback. Teachers instead expected students to actively ask for feedback. Students perceived the need for exploiting the course feedback for course development purposes more than before. Teachers saw foremost the challenges and problems in the exploitation of the feedback. In the future, more effort must be put on the research of the evaluation of learning and feedback, as the quality assurance and continuous improvement of the teaching calls for new data.

Engineering the pentose phosphate pathway of Saccharomyces cerevisiae for production of ethanol and xylitol

The baker s yeast Saccharomyces cerevisiae has a long tradition in alcohol production from D-glucose of e.g. starch. However, without genetic modifications it is unable to utilise the 5-carbon sugars D-xylose and L arabinose present in plant biomass. In this study, one key metabolic step of the catabolic D-xylose pathway in recombinant D-xylose-utilising S. cerevisiae strains was studied. This step, carried out by xylulokinase (XK), was shown to be rate-limiting, because overexpression of the xylulokinase-encoding gene XKS1 increased both the specific ethanol production rate and the yield from D xylose. In addition, less of the unwanted side product xylitol was produced. Recombinant D-xylose-utilizing S. cerevisiae strains have been constructed by expressing the genes coding for the first two enzymes of the pathway, D-xylose reductase (XR) and xylitol dehydrogenase (XDH) from the D-xylose-utilising yeast Pichia stipitis. In this study, the ability of endogenous genes of S. cerevisiae to enable D-xylose utilisation was evaluated. Overexpression of the GRE3 gene coding for an unspecific aldose reductase and the ScXYL2 gene coding for a xylitol dehydrogenase homologue enabled growth on D-xylose in aerobic conditions. However, the strain with GRE3 and ScXYL2 had a lower growth rate and accumulated more xylitol compared to the strain with the corresponding enzymes from P. stipitis. Use of the strictly NADPH-dependent Gre3p instead of the P. stipitis XR able to utilise both NADH and NADPH leads to a more severe redox imbalance. In a S. cerevisiae strain not engineered for D-xylose utilisation the presence of D-xylose increased xylitol dehydrogenase activity and the expression of the genes SOR1 or SOR2 coding for sorbitol dehydrogenase. Thus, D-xylose utilisation by S. cerevisiae with activities encoded by ScXYL2 or possibly SOR1 or SOR2, and GRE3 is feasible, but requires efficient redox balance engineering. Compared to D-xylose, D-glucose is a cheap and readily available substrate and thus an attractive alternative for xylitol manufacture. In this study, the pentose phosphate pathway (PPP) of S. cerevisiae was engineered for production of xylitol from D-glucose. Xylitol was formed from D-xylulose 5-phosphate in strains lacking transketolase activity and expressing the gene coding for XDH from P. stipitis. In addition to xylitol, ribitol, D-ribose and D-ribulose were also formed. Deletion of the xylulokinase-encoding gene increased xylitol production, whereas the expression of DOG1 coding for sugar phosphate phosphatase increased ribitol, D-ribose and D-ribulose production. Strains lacking phosphoglucose isomerase (Pgi1p) activity were shown to produce 5 carbon compounds through PPP when DOG1 was overexpressed. Expression of genes encoding glyceraldehyde 3-phosphate dehydrogenase of Bacillus subtilis, GapB, or NAD-dependent glutamate dehydrogenase Gdh2p of S. cerevisiae, altered the cellular redox balance and enhanced growth of pgi1 strains on D glucose, but co-expression with DOG1 reduced growth on higher D-glucose concentrations. Strains lacking both transketolase and phosphoglucose isomerase activities tolerated only low D-glucose concentrations, but the yield of 5-carbon sugars and sugar alcohols on D-glucose was about 50% (w/w).

Mu in vitro transposition applications in protein engineering

Transposons, mobile genetic elements that are ubiquitous in all living organisms have been used as tools in molecular biology for decades. They have the ability to move into discrete DNA locations with no apparent homology to the target site. The utility of transposons as molecular tools is based on their ability to integrate into various DNA sequences efficiently, producing extensive mutant clone libraries that can be used in various molecular biology applications. Bacteriophage Mu is one of the most useful transposons due to its well-characterized and simple in vitro transposition reaction. This study establishes the properties of the Mu in vitro transposition system as a versatile multipurpose tool in molecular biology. In addition, this study describes Mu-based applications for engineering proteins by random insertional transposon mutagenesis in order to study structure-function relationships in proteins. We initially characterized the properties of the minimal Mu in vitro transposition system. We showed that the Mu transposition system works efficiently and accurately and produces insertions into a wide spectrum of target sites in different DNA molecules. Then, we developed a pentapeptide insertion mutagenesis strategy for inserting random five amino acid cassettes into proteins. These protein variants can be used especially for screening important sites for protein-protein interactions. Also, the system may produce temperature-sensitive variants of the protein of interest. Furthermore, we developed an efficient screening system for high-resolution mapping of protein-protein interfaces with the pentapeptide insertion mutagenesis. This was accomplished by combining the mutagenesis with subsequent yeast two-hybrid screening and PCR-based genetic footprinting. This combination allows the analysis of the whole mutant library en masse, without the need for producing or isolating separate mutant clones, and the protein-protein interfaces can be determined at amino acid accuracy. The system was validated by analysing the interacting region of JFC1 with Rab8A, and we show that the interaction is mediated via the JFC1 Slp homology domain. In addition, we developed a procedure for the production of nested sets of N- and C-terminal deletion variants of proteins with the Mu system. These variants are useful in many functional studies of proteins, especially in mapping regions involved in protein-protein interactions. This methodology was validated by analysing the region in yeast Mso1 involved in an interaction with Sec1. The results of this study show that the Mu in vitro transposition system is versatile for various applicational purposes and can efficiently be adapted to random protein engineering applications for functional studies of proteins.

Atomic scale engineering of carbon nanotubes

Carbon nanotubes, seamless cylinders made from carbon atoms, have outstanding characteristics: inherent nano-size, record-high Young’s modulus, high thermal stability and chemical inertness. They also have extraordinary electronic properties: in addition to extremely high conductance, they can be both metals and semiconductors without any external doping, just due to minute changes in the arrangements of atoms. As traditional silicon-based devices are reaching the level of miniaturisation where leakage currents become a problem, these properties make nanotubes a promising material for applications in nanoelectronics. However, several obstacles must be overcome for the development of nanotube-based nanoelectronics. One of them is the ability to modify locally the electronic structure of carbon nanotubes and create reliable interconnects between nanotubes and metal contacts which likely can be used for integration of the nanotubes in macroscopic electronic devices. In this thesis, the possibility of using ion and electron irradiation as a tool to introduce defects in nanotubes in a controllable manner and to achieve these goals is explored. Defects are known to modify the electronic properties of carbon nanotubes. Some defects are always present in pristine nanotubes, and naturally are introduced during irradiation. Obviously, their density can be controlled by irradiation dose. Since different types of defects have very different effects on the conductivity, knowledge of their abundance as induced by ion irradiation is central for controlling the conductivity. In this thesis, the response of single walled carbon nanotubes to ion irradiation is studied. It is shown that, indeed, by energy selective irradiation the conductance can be controlled. Not only the conductivity, but the local electronic structure of single walled carbon nanotubes can be changed by the defects. The presented studies show a variety of changes in the electronic structures of semiconducting single walled nanotubes, varying from individual new states in the band gap to changes in the band gap width. The extensive simulation results for various types of defect make it possible to unequivocally identify defects in single walled carbon nanotubes by combining electronic structure calculations and scanning tunneling spectroscopy, offering a reference data for a wide scientific community of researchers studying nanotubes with surface probe microscopy methods. In electronics applications, carbon nanotubes have to be interconnected to the macroscopic world via metal contacts. Interactions between the nanotubes and metal particles are also essential for nanotube synthesis, as single walled nanotubes are always grown from metal catalyst particles. In this thesis, both growth and creation of nanotube-metal nanoparticle interconnects driven by electron irradiation is studied. Surface curvature and the size of metal nanoparticles is demonstrated to determine the local carbon solubility in these particles. As for nanotube-metal contacts, previous experiments have proved the possibility to create junctions between carbon nanotubes and metal nanoparticles under irradiation in a transmission electron microscope. In this thesis, the microscopic mechanism of junction formation is studied by atomistic simulations carried out at various levels of sophistication. It is shown that structural defects created by the electron beam and efficient reconstruction of the nanotube atomic network, inherently related to the nanometer size and quasi-one dimensional structure of nanotubes, are the driving force for junction formation. Thus, the results of this thesis not only address practical aspects of irradiation-mediated engineering of nanosystems, but also contribute to our understanding of the behaviour of point defects in low-dimensional nanoscale materials.

Doing marriage and parenthood: The division of household labour across two life course events

The current study is a longitudinal investigation into changes in the division of household labour across transitions to marriage and parenthood in the UK. Previous research has noted a more traditional division of household labour, with women performing the majority of housework, amongst spouses and couples with children. However, the bulk of this work has been cross-sectional in nature. The few longitudinal studies that have been carried out have been rather ambiguous about the effect of marriage and parenthood on the division of housework. Theoretically, this study draws on gender construction theory. The key premise of this theory is that gender is something that is performed and created in interaction, and, as a result, something fluid and flexible rather than fixed and stable. The idea that couples ‘do gender’ through housework has been a major theoretical breakthrough. Gender-neutral explanations of the division of household labour, positing rational acting individuals, have failed to explicate why women continue to perform an unequal share of housework, regardless of socio-economic status. Contrastingly, gender construction theory situates gender as the key process in dividing household labour. By performing and avoiding certain housework chores, couples fulfill social norms of what it means to be a man and a woman although, given the emphasis on human agency in producing and contesting gender, couples are able to negotiate alternative gender roles which, in turn, feed back into the structure of social norms in an ever-changing societal landscape. This study adds extra depth to the doing gender approach by testing whether or not couples negotiate specific conjugal and parent roles in terms of the division of household labour. Both transitions hypothesise a more traditional division of household labour. Data comes from the British Household Panel Survey, a large, nationally representative quantitative survey that has been carried out annually since 1991. Here, data tracks the same 776 couples at two separate time points – 1996 and 2005. OLS regression is used to test whether or not transitions to marriage and parenthood have a significant impact on the division of household labour whilst controlling for host of relevant socio-economic factors. Results indicate that marriage has no significant effect on how couples partition housework. Those couples making the transition from cohabitation to marriage do not show significant changes in housework arrangements from those couples who remain cohabiting in both waves. On the other hand, becoming parents does lead to a more traditional division of household labour whilst controlling for socio-economic factors which accompany the move to parenthood. There is then some evidence that couples use the site of household labour to ‘do parenthood’ and generate identities which both use and inform socially prescribed notions of what it means to be a mother and a father. Support for socio-economic explanations of the division of household labour was mixed although it remains clear that they, alone, cannot explain how households divide housework.

Depression and Cognition in Type 2 Diabetes from a Life Course Perspective

Background: Type 2 diabetes is linked to several complications which add to both physical and mental distress. Depression is a common co-morbidity of diabetes which can occur both as a cause and a consequence of type 2 diabetes. Depression has been shown to correlate with glucose regulation and treating depression might prove beneficial for glucose regulation as well as for mental well being. Another complication which might affect diabetes management is cognitive decline. Several risk factors and complications of diabetes might modify the risk for developing cognitive impairment, which is increased 1.5 times among subjects with type 2 diabetes. Type 2 diabetes, depression and impaired cognitive performance have all been linked to low birth weight. This thesis aimed to explore the effects and interactions of birth weight, depression and cognitive ability in relation to type 2 diabetes from a life course perspective. Subjects and methods: Studies I, II and V were part of the Helsinki Birth Cohort Study. 2003 subjects participated in an extensive clinical examination at an average age of 61 years. A standard glucose tolerance test (OGTT) was performed and depressive symptoms were assessed using the Beck Depression Inventory (BDI). In addition data was obtained from child welfare clinics and national registers. A subset of the cohort (n=1247) also performed a test on cognitive performance (CogState ®) at the average age of 64. Studies III and IV were randomised clinical trials where mildly depressed diabetic subjects were treated with paroxetine or placebo and the effect on metabolic parameters and quality of life was assessed. The first trial included 14 women and lasted 10 weeks, while the second trial included 43 subjects, both men and women, and lasted 6 months. Results: Type 2 diabetes was positively associated with the occurrence of depressive symptoms. Among diabetic subjects 23.6% had depressive symptoms, compared to 16.7% of subjects with normal glucose tolerance (OR = 1.77, p<0.001). Formal mediation analysis revealed that cardiovascular disease (CVD) is likely to act as a mediator in the association. Furthermore, low birth weight was found to modify the association between type 2 diabetes, CVD and depression. The association between BDI score and having type 2 diabetes or CVD was twice as strong in the subgroup with low birth weight (≤ 2500g) compared with the group with birth weight > 2500g (p for interaction 0.058). In the six months long randomised clinical trial (study IV) paroxetine had a transient beneficial effect on glycosylated haemoglobin A1c (GHbA1c) and quality of life when compared to placebo after three months of treatment. In study V we found that subjects with known diabetes had a consistently poorer level of cognitive performance than subjects with normal glucose tolerance in most of the tested cognitive domains. This effect was further amplified among those born with a small birth weight (p for interaction 0.002). Conclusions: Type 2 diabetes is associated with a higher occurrence of depressive symptoms compared to subjects with normal glucose tolerance. This association is especially strong among subjects with CVD and those born with a low birth weight. Treating depressed diabetic subjects with paroxetine has no long term effect on glucose regulation. Physicians should be aware of depression as an important co-morbidity of type 2 diabetes. Both depression and the cognitive decline often seen among diabetic subjects are increased if the subject is born with a low birth weight. Physicians should recognise low birth weight as an additional risk factor and modifier of diabetic complications.

Discovery of oxidative enzymes for food engineering : Tyrosinase and sulfhydryl oxidase

Enzymes offer many advantages in industrial processes, such as high specificity, mild treatment conditions and low energy requirements. Therefore, the industry has exploited them in many sectors including food processing. Enzymes can modify food properties by acting on small molecules or on polymers such as carbohydrates or proteins. Crosslinking enzymes such as tyrosinases and sulfhydryl oxidases catalyse the formation of novel covalent bonds between specific residues in proteins and/or peptides, thus forming or modifying the protein network of food. In this study, novel secreted fungal proteins with sequence features typical of tyrosinases and sulfhydryl oxidases were iden-tified through a genome mining study. Representatives of both of these enzyme families were selected for heterologous produc-tion in the filamentous fungus Trichoderma reesei and biochemical characterisation. Firstly, a novel family of putative tyrosinases carrying a shorter sequence than the previously characterised tyrosinases was discovered. These proteins lacked the whole linker and C-terminal domain that possibly play a role in cofactor incorporation, folding or protein activity. One of these proteins, AoCO4 from Aspergillus oryzae, was produced in T. reesei with a production level of about 1.5 g/l. The enzyme AoCO4 was correctly folded and bound the copper cofactors with a type-3 copper centre. However, the enzyme had only a low level of activity with the phenolic substrates tested. Highest activity was obtained with 4-tert-butylcatechol. Since tyrosine was not a substrate for AoCO4, the enzyme was classified as catechol oxidase. Secondly, the genome analysis for secreted proteins with sequence features typical of flavin-dependent sulfhydryl oxidases pinpointed two previously uncharacterised proteins AoSOX1 and AoSOX2 from A. oryzae. These two novel sulfhydryl oxidases were produced in T. reesei with production levels of 70 and 180 mg/l, respectively, in shake flask cultivations. AoSOX1 and AoSOX2 were FAD-dependent enzymes with a dimeric tertiary structure and they both showed activity on small sulfhydryl compounds such as glutathione and dithiothreitol, and were drastically inhibited by zinc sulphate. AoSOX2 showed good stabil-ity to thermal and chemical denaturation, being superior to AoSOX1 in this respect. Thirdly, the suitability of AoSOX1 as a possible baking improver was elucidated. The effect of AoSOX1, alone and in combi-nation with the widely used improver ascorbic acid was tested on yeasted wheat dough, both fresh and frozen, and on fresh water-flour dough. In all cases, AoSOX1 had no effect on the fermentation properties of fresh yeasted dough. AoSOX1 nega-tively affected the fermentation properties of frozen doughs and accelerated the damaging effects of the frozen storage, i.e. giving a softer dough with poorer gas retention abilities than the control. In combination with ascorbic acid, AoSOX1 gave harder doughs. In accordance, rheological studies in yeast-free dough showed that the presence of only AoSOX1 resulted in weaker and more extensible dough whereas a dough with opposite properties was obtained if ascorbic acid was also used. Doughs containing ascorbic acid and increasing amounts of AoSOX1 were harder in a dose-dependent manner. Sulfhydryl oxidase AoSOX1 had an enhancing effect on the dough hardening mechanism of ascorbic acid. This was ascribed mainly to the produc-tion of hydrogen peroxide in the SOX reaction which is able to convert the ascorbic acid to the actual improver dehydroascorbic acid. In addition, AoSOX1 could possibly oxidise the free glutathione in the dough and thus prevent the loss of dough strength caused by the spontaneous reduction of the disulfide bonds constituting the dough protein network. Sulfhydryl oxidase AoSOX1 is therefore able to enhance the action of ascorbic acid in wheat dough and could potentially be applied in wheat dough baking.

Doing marriage and parenthood: The division of household labour across two life course events

The current study is a longitudinal investigation into changes in the division of household labour across transitions to marriage and parenthood in the UK. Previous research has noted a more traditional division of household labour, with women performing the majority of housework, amongst spouses and couples with children. However, the bulk of this work has been cross-sectional in nature. The few longitudinal studies that have been carried out have been rather ambiguous about the effect of marriage and parenthood on the division of housework. Theoretically, this study draws on gender construction theory. The key premise of this theory is that gender is something that is performed and created in interaction, and, as a result, something fluid and flexible rather than fixed and stable. The idea that couples 'do gender' through housework has been a major theoretical breakthrough. Gender-neutral explanations of the division of household labour, positing rational acting individuals, have failed to explicate why women continue to perform an unequal share of housework, regardless of socioeconomic status. Contrastingly, gender construction theory situates gender as the key process in dividing household labour. By performing and avoiding certain housework chores, couples fulfill social norms of what it means to be a man and a woman although, given the emphasis on human agency in producing and contesting gender, couples are able to negotiate alternative gender roles which, in turn, feed back into the structure of social norms in an ever-changing societal landscape. This study adds extra depth to the doing gender approach by testing whether or not couples negotiate specific conjugal and parent roles in terms of the division of household labour. Both transitions hypothesise a more traditional division of household labour. Data comes from the British Household Panel Survey, a large, nationally representative quantitative survey that has been carried out annually since 1991. Here, data tracks the same 776 couples at two separate time points - 1996 and 2005. OLS regression is used to test whether or not transitions to marriage and parenthood have a significant impact on the division of household labour whilst controlling for host of relevant socio-economic factors. Results indicate that marriage has no significant effect on how couples partition housework. Those couples making the transition from cohabitation to marriage do not show significant changes in housework arrangements from those couples who remain cohabiting in both waves. On the other hand, becoming parents does lead to a more traditional division of household labour whilst controlling for socio-economic factors which accompany the move to parenthood. There is then some evidence that couples use the site of household labour to 'do parenthood' and generate identities which both use and inform socially prescribed notions of what it means to be a mother and a father. Support for socio-economic explanations of the division of household labour was mixed although it remains clear that they, alone, cannot explain how households divide housework.