The effects of stall surfaces and milk yield on the lying behavior of dairy cow

The importance of lying behavior to dairy cows and the feasible definition of lying has attracted many studies on the subject. Cattle show both behavioral and physiological stress responses when subjected to thwarting of their lying behavior. If cows are unable to lie down they later compensate for lost lying time when possible. Environmental factors such as housing and bedding systems have been noted to affect the time spent lying, but there is usually large variation in lying time between individuals. Internal factors such as the reproductive stage, age and health of cows affect their lying time and can cause variation. However, the effect of higher milk production on behavior has not previously been illuminated. The objective of this study was to provide data applicable for the improvement of resting conditions of cows. The preference of stall surface material, differences in normal behavior per unit time and various health measures were observed. The aim was to evaluate lying behavior and cow comfort on different stall bedding materials. In addition, the effect of milk yield on behavior was examined in a tie stall experiment. The preferences for surface materials were investigated in 5 experiments using 3 surface materials with bedding manipulations. According to the results, the cows preferred abundant straw bedding and soft rubber mats. However, they showed an aversion to sand bedding. Some individuals even refused to use stalls with sand when no organic bedding material was present. However, this study was unable to determine the reason for the avoidance, as neither the sand particle size nor thermal properties appeared critical. However, previous exposure to particular surface materials increased the preference for them. The amount of straw bedding was found to be an important factor affecting the preferences for stalls, and the lying time in stalls increased when the flooring softness was improved by applying straw or by installing elastic mats. Despite sand being the least preferred flooring material in preference tests, the health of legs improved during exposure to sand-floored stalls. Moreover cows using sand were cleaner than those that used straw stalls. Thus, sand bedding entailed some health benefits despite the contradictory results of preference tests, which more strongly reflected the perceptions of individual animals. Milk yield was observed to affect behavior by reducing the lying time, possibly due to factors other than longer duration of eating. High yielding cows seemed to intensify their lying bouts, as they were observed to lie with the neck muscles relaxed sooner after lying down than lower yielding cows. In conclusion, cows were found to prefer softer stall surface materials and organic bedding material. In addition, the lying time was reduced by a high milk yield, although the lying time seemed to be important for resting. Cows might differ in the needs for their lying environment. The management of dairy cows should eliminate any unnecessary prevention of lying, as even in tie-stalls high yielding cows seem to be affected by time constraints. Adding fresh bedding material to stalls increases the comfort of any stall flooring material.

Crystallization as a Tool for Controlling and Designing Properties of Pharmaceutical Solids

The ability to deliver the drug to the patient in a safe, efficacious and cost-effective manner depends largely on the physicochemical properties of the active pharmaceutical ingredient (API) in the solid state. In this context, crystallization is of critical importance in pharmaceutical industry, as it defines physical and powder properties of crystalline APIs. An improved knowledge of the various aspects of crystallization process is therefore needed. The overall goal of this thesis was to gain better understanding of the relationships between crystallization, solid-state form and properties of pharmaceutical solids with a focus on a crystal engineering approach to design technological properties of APIs. Specifically, solid-state properties of the crystalline forms of the model APIs, erythromycin A and baclofen, and the influence of solvent on their crystallization behavior were investigated. In addition, the physical phenomena associated with wet granulation and hot-melting processing of the model APIs were examined at the molecular level. Finally, the effect of crystal habit modification of a model API on its tabletting properties was evaluated. The thesis enabled the understanding of the relationship between the crystalline forms of the model APIs, which is of practical importance for solid-state control during processing and storage. Moreover, a new crystalline form, baclofen monohydrate, was discovered and characterized. Upon polymorph screening, erythromycin A demonstrated high solvate-forming propensity thus emphasizing the need for careful control of the solvent effects during formulation. The solvent compositions that yield the desirable crystalline form of erythromycin A were defined. Furthermore, new examples on solvent-mediated phase transformations taking place during wet granulation of baclofen and hot-melt processing of erythromycin A dihydrate with PEG 6000 are reported. Since solvent-mediated phase transformations involve the crystallization of a stable phase and hence affect the dissolution kinetics and possibly absorption of the API these transformations must be well documented. Finally, a controlled-crystallization method utilizing HPMC as a crystal habit modifier was developed for erythromycin A dihydrate. The crystals with modified habit were shown to posses improved compaction properties as compared with those of unmodified crystals. This result supports the idea of morphological crystal engineering as a tool for designing technological properties of APIs and is of utmost practical interest.

Process Analytical Technology Approach on Fluid Bed Granulation and Drying : Identifying Critical Relationships and Constructing the Design Space

Fluid bed granulation is a key pharmaceutical process which improves many of the powder properties for tablet compression. Dry mixing, wetting and drying phases are included in the fluid bed granulation process. Granules of high quality can be obtained by understanding and controlling the critical process parameters by timely measurements. Physical process measurements and particle size data of a fluid bed granulator that are analysed in an integrated manner are included in process analytical technologies (PAT). Recent regulatory guidelines strongly encourage the pharmaceutical industry to apply scientific and risk management approaches to the development of a product and its manufacturing process. The aim of this study was to utilise PAT tools to increase the process understanding of fluid bed granulation and drying. Inlet air humidity levels and granulation liquid feed affect powder moisture during fluid bed granulation. Moisture influences on many process, granule and tablet qualities. The approach in this thesis was to identify sources of variation that are mainly related to moisture. The aim was to determine correlations and relationships, and utilise the PAT and design space concepts for the fluid bed granulation and drying. Monitoring the material behaviour in a fluidised bed has traditionally relied on the observational ability and experience of an operator. There has been a lack of good criteria for characterising material behaviour during spraying and drying phases, even though the entire performance of a process and end product quality are dependent on it. The granules were produced in an instrumented bench-scale Glatt WSG5 fluid bed granulator. The effect of inlet air humidity and granulation liquid feed on the temperature measurements at different locations of a fluid bed granulator system were determined. This revealed dynamic changes in the measurements and enabled finding the most optimal sites for process control. The moisture originating from the granulation liquid and inlet air affected the temperature of the mass and pressure difference over granules. Moreover, the effects of inlet air humidity and granulation liquid feed rate on granule size were evaluated and compensatory techniques used to optimize particle size. Various end-point indication techniques of drying were compared. The ∆T method, which is based on thermodynamic principles, eliminated the effects of humidity variations and resulted in the most precise estimation of the drying end-point. The influence of fluidisation behaviour on drying end-point detection was determined. The feasibility of the ∆T method and thus the similarities of end-point moisture contents were found to be dependent on the variation in fluidisation between manufacturing batches. A novel parameter that describes behaviour of material in a fluid bed was developed. Flow rate of the process air and turbine fan speed were used to calculate this parameter and it was compared to the fluidisation behaviour and the particle size results. The design space process trajectories for smooth fluidisation based on the fluidisation parameters were determined. With this design space it is possible to avoid excessive fluidisation and improper fluidisation and bed collapse. Furthermore, various process phenomena and failure modes were observed with the in-line particle size analyser. Both rapid increase and a decrease in granule size could be monitored in a timely manner. The fluidisation parameter and the pressure difference over filters were also discovered to express particle size when the granules had been formed. The various physical parameters evaluated in this thesis give valuable information of fluid bed process performance and increase the process understanding.

The Homeless Etiquette : Social Interaction and Behavior Among the Homeless in Taito Ward, Tokyo

The thesis focuses on the social interaction and behavior of the homeless living in Tokyo's Taito Ward. The study is based on the author's own ethnographic field research carried out in the autumn 2003. The chosen methodologies were based on the methodology called "participant observation", and they were used depending on the context. The ethnographic field research was carried out from the mid-August to the beginning of the October in 2003. The most important targets of the research were three separate loosely knit groups placed in certain parts of Taito Ward. One of these groups was based in proximity to the Ueno train station, one group gathered every morning around a homeless support organization called San'yûkai, and one was based in Tamahime Park located in the old San'ya area of Tokyo. The analysis is based on the aspects of Takie Sugiyama Lebra's theory of "social relativism". Lebra's theory consists of the following, arguably universal aspects: belongingness, empathy, dependence, place in the society, and reciprocity. In addition, all the interaction and behavior is tied to the context and the situation. According to Lebra, ritual and intimate situations produce similar action, which is socially relative. Of these, the norms of the ritual behavior are more regulated, while the intimate bahavior is less spontaneous. On the contrary, an anomic situation produces anomic behavior, which is not socially relative. Lebra's theory is critically reviewed by the author of the thesis, and the author has attempted to modify the theory to make it more adaptable to the present-day society and to the analysis. Erving Goffman's views of the social interaction and Anthony Giddens' theories about the social structures have been used as complementary thoretical basis. The aim of the thesis is to clarify, how and why the interaction and the behavior of some homeless individuals in some situations follow the aspects of Lebra's "social relativism", and on the other hand, why in some situations they do not. In the latter cases the answers can be sought from regional and individual differences, or from the inaptness of the theory to analyze the presented situation. Here, a significant factor is the major finding of the field study: the so called "homeless etiquette", which is an abstract set of norms and values that influences the social interaction and behavior of the homeless, and with which many homeless individuals presented in the study complied. The fundamental goal of the thesis is to reach profound understanding about the daily life of the homeless, whose lives were studied. The author argues that this kind of profound understanding is necessary in looking for sustainable solutions in the areas of social and housing policy to improve the position of the homeless and the qualitative functioning of the society.

Pain in juvenile idiopathic arthritis : parents and children as agents of disease management

Juvenile idiopathic arthritis (JIA) is a severe childhood disease usually characterized by long-term morbidity, unpredictable course, pain, and limitations in daily activities and social participation. The disease affects not only the child but also the whole family. The family is expected to adhere to an often very laborious regimen over a long period of time. However, the parental role is incoherently conceptualized in the research field. Pain in JIA is of somatic origin, but psychosocial factors, such as mood and self-efficacy, are critical in the perception of pain and in its impact on functioning. This study examined the factors correlating and possibly explaining pain in JIA, with a special emphasis on the mutual relations between parent- and patient-driven variables. In this patient series pain was not associated with the disease activity. The degree of pain was on average fairly low in children with JIA. When the children were clustered according to age, anxiety and depression, four distinguishable cluster groups significantly associated with pain emerged. One of the groups was described by concept vulnerability because of unfavorable variable associations. Parental depressive and anxiety symptoms accompanied by illness management had a predictive power in discriminating groups of children with varying distress levels. The parent’s and child’s perception of a child’s functional capability, distress, and somatic self-efficacy had independent explanatory power predicting the child’s pain. Of special interest in the current study was self-efficacy, which refers to the belief of an individual that he/she has the ability to engage in the behavior required for tackling the disease. In children with JIA, strong self-efficacy was related to lower levels of pain, depressive symptoms and trait anxiety. This suggests strengthening a child’s sense of self-efficacy, when helping the child to cope with his or her disease. Pain experienced by a child with JIA needs to be viewed in a multidimensional bio-psycho-social context that covers biological, environmental and cognitive behavioral mechanisms. The relations between the parent-child variables are complex and affect pain both directly and indirectly. Developing pain-treatment modalities that recognize the family as a system is also warranted.

Fuel conditions and fire behavior characteristics of managed Picea abies and Pinus sylvestris forests in Finland

The objectives of this study were to analyze the impact of structural stand characteristics on ignition potential, surface fuel moisture, and fire behavior in Pinus sylvestris L. and Picea abies (L.) Karst stands in Finland and to explain stand-specific fire danger using the Canadian Fire Weather Index System and the Finnish Fire Risk Index. Additionally, the study analyzes the relationship between observed fire activity and fire weather indices at different stages of growing season. Field experiments were carried out in Pinus sylvestris or Picea abies dominated stands during fire seasons 2001 and 2002. Observations on ignition potential, fuel moisture, and fire behavior were analyzed in relation to stand structure and the outputs of the Finnish and Canadian fire weather indices. Seasonal patterns of fire activity were examined based on national fire statistics 1996 2003, effective temperature sum, and the fire weather indices. Point fire ignition potential was highest in Pinus clear-cuts and lowest in closed Picea stands. Moss-dominated surface fuels were driest in clear-cut and sapling stage stands and presented the highest moisture content under closed Picea canopy. Pinus sylvestris stands carried fire under a wide range of fire weather conditions under which Picea abies stands failed to sustain fire. In the national fire records, the daily number of reported ignitions presented its highest value during late fire season whereas the daily area burned peaked most substantially during early season. The fire weather indices correlated significantly with ignition potential and fuel moisture but were unable to explain fire behavior in the experimental fires. During the initial and final stages of the growing season, fire activity was disconnected from weather-based fire danger ratings. Information on stand structure and season stage would benefit the assessment of fire danger in Finnish forest landscape for fire suppression and controlled burning purposes.

A Critical Assesment of Occluded Fronts

The aim of this work was the assessment about the structure and use of the conceptual model of occlusion in operational weather forecasting. In the beginning a survey has been made about the conceptual model of occlusion as introduced to operational forecasters in the Finnish Meteorological Institute (FMI). In the same context an overview has been performed about the use of the conceptual model in modern operational weather forecasting, especially in connection with the widespread use of numerical forecasts. In order to evaluate the features of the occlusions in operational weather forecasting, all the occlusion processes occurring during year 2003 over Europe and Northern Atlantic area have been investigated using the conceptual model of occlusion and the methods suggested in the FMI. The investigation has yielded a classification of the occluded cyclones on the basis of the extent the conceptual model has fitted the description of the observed thermal structure. The seasonal and geographical distribution of the classes has been inspected. Some relevant cases belonging to different classes have been collected and analyzed in detail: in this deeper investigation tools and techniques, which are not routinely used in operational weather forecasting, have been adopted. Both the statistical investigation of the occluded cyclones during year 2003 and the case studies have revealed that the traditional classification of the types of the occlusion on the basis of the thermal structure doesn t take into account the bigger variety of occlusion structures which can be observed. Moreover the conceptual model of occlusion has turned out to be often inadequate in describing well developed cyclones. A deep and constructive revision of the conceptual model of occlusion is therefore suggested in light of the result obtained in this work. The revision should take into account both the progresses which are being made in building a theoretical footing for the occlusion process and the recent tools and meteorological quantities which are nowadays available.