Crystallization as a Tool for Controlling and Designing Properties of Pharmaceutical Solids

The ability to deliver the drug to the patient in a safe, efficacious and cost-effective manner depends largely on the physicochemical properties of the active pharmaceutical ingredient (API) in the solid state. In this context, crystallization is of critical importance in pharmaceutical industry, as it defines physical and powder properties of crystalline APIs. An improved knowledge of the various aspects of crystallization process is therefore needed. The overall goal of this thesis was to gain better understanding of the relationships between crystallization, solid-state form and properties of pharmaceutical solids with a focus on a crystal engineering approach to design technological properties of APIs. Specifically, solid-state properties of the crystalline forms of the model APIs, erythromycin A and baclofen, and the influence of solvent on their crystallization behavior were investigated. In addition, the physical phenomena associated with wet granulation and hot-melting processing of the model APIs were examined at the molecular level. Finally, the effect of crystal habit modification of a model API on its tabletting properties was evaluated. The thesis enabled the understanding of the relationship between the crystalline forms of the model APIs, which is of practical importance for solid-state control during processing and storage. Moreover, a new crystalline form, baclofen monohydrate, was discovered and characterized. Upon polymorph screening, erythromycin A demonstrated high solvate-forming propensity thus emphasizing the need for careful control of the solvent effects during formulation. The solvent compositions that yield the desirable crystalline form of erythromycin A were defined. Furthermore, new examples on solvent-mediated phase transformations taking place during wet granulation of baclofen and hot-melt processing of erythromycin A dihydrate with PEG 6000 are reported. Since solvent-mediated phase transformations involve the crystallization of a stable phase and hence affect the dissolution kinetics and possibly absorption of the API these transformations must be well documented. Finally, a controlled-crystallization method utilizing HPMC as a crystal habit modifier was developed for erythromycin A dihydrate. The crystals with modified habit were shown to posses improved compaction properties as compared with those of unmodified crystals. This result supports the idea of morphological crystal engineering as a tool for designing technological properties of APIs and is of utmost practical interest.

Reading the Texture of Reality : Chaos Theory, Literature and the Humanist Perspective

Tutkimuksessa analysoidaan kaaosteorian vaikutusta kaunokirjallisuudessa ja kirjallisuudentutkimuksessa ja esitetään, että kaaosteorian roolia kirjallisuuden kentällä voidaan parhaiten ymmärtää sen avaamien käsitteiden kautta. Suoran soveltamisen sijaan kaaosteorian avulla on käyty uudenlaisia keskusteluja vanhoista aiheista ja luonnontieteestä ammennetut käsitteet ovat johtaneet aiemmin tukkeutuneiden argumenttien avaamiseen uudesta näkökulmasta käsin. Väitöskirjassa keskitytään kolmeen osa-alueeseen: kaunokirjallisen teoksen rakenteen teoretisointiin, ihmisen (erityisesti tekijän) identiteetin hahmottamiseen ja kuvailemiseen sekä fiktion ja todellisuuden suhteen pohdintaan. Tutkimuksen tarkoituksena on osoittaa, kuinka kaaosteorian kautta näitä aiheita on lähestytty niin kirjallisuustieteessä kuin kaunokirjallisissa teoksissakin. Väitöskirjan keskiössä ovat romaanikirjailija John Barthin, dramatisti Tom Stoppardin ja runoilija Jorie Grahamin teosten analyysit. Nämä kirjailijat ammentavat kaaosteoriasta keinoja käsitteellistää rakenteita, jotka ovat yhtä aikaa dynaamisia prosesseja ja hahmotettavia muotoja. Kaunokirjallisina teemoina nousevat esiin myös ihmisen paradoksaalisesti tunnistettava ja aina muuttuva identiteetti sekä lopullista haltuunottoa pakeneva, mutta silti kiehtova ja tavoiteltava todellisuus. Näiden kirjailijoiden teosten analyysin sekä teoreettisen keskustelun kautta väitöskirjassa tuodaan esiin aiemmassa tutkimuksessa varjoon jäänyt, koherenssia, ymmärrettävyyttä ja realismia painottava humanistinen näkökulma kaaosteorian merkityksestä kirjallisuudessa.

Controlling transduction and replication of oncolytic adenoviruses

Despite progress in conventional cancer treatment regimes, metastatic disease essentially remains incurable and new treatment alternatives are needed. Virotherapy is a relatively novel approach in cancer treatment. It harnesses the natural ability of oncolytic viruses to kill the cells they proliferate in and to spread to neighboring cells, thereby amplifying the therapeutic effect of the initial input dose. The use of replicating, oncolytic viruses for cancer treatment necessitates introduction of various genetic modifications to the viral genome, thereby restraining replication exclusively to tumor cells and eventually obtaining selective eradication of the tumor without side effects to healthy tissue. Furthermore, various modifications can be applied to the viral capsid in hope of gaining effective transduction of target tissue. In other words, the entry of viruses into tumor tissue can be augmented by allowing the virus to utilize non-native receptors for entry. Genetic capsid modifications may also help to avoid some major hurdles in systemic delivery that ultimately lead to the rapid clearance of the virus from the blood and virus induced toxicity. In addition to genetic modifications that alter the phenotype of the virus, some pharmacologic agents may be utilized to enhance the virus entry to target site. Liver kupffer cells (KC) are responsible for the majority of viral clearance after systemic viral delivery and they play a major role in adenovirus induced acute toxicity. The therapeutic window could possibly be widened by transiently depleting KCs, allowing smaller viral input doses and diminishing KC related toxicity. The transductional efficacy of various capsid modified viruses was analyzed in vitro and in vivo in murine orthotopic breast cancer model. The effect of capsid modifications on the oncolytic efficacy, i.e. the ability of the viruses to kill cancer cells, was evaluated in vitro and in vivo in murine cancer models. We concluded that capsid modifications result in transductional enhancement, and that enhanced transduction translates into more potent oncolysis in vitro and in vivo. When KC depleting agents were used in vivo prior to viral injections, enhanced tumor transduction was seen, but this effect was not translated into enhanced antitumor activity. Transcriptional regulation of replicative oncolytic viruses is a prerequisite for virotherapy. Tumor or tissue specific promoters can be used to control the transcription of adenoviral early genes to gain cancer specific viral replication. Specific deletions in viral regions essential for virus replication in normal cells can further increase the safety by allowing viral genome replication in cancer cells featuring specific mutations. Genetically modified viruses were shown to be able to kill putative cancer stem cells that are thought to be responsible for post treatment relapses and metastasis. Further, pharmacologic intervention reduced viral replication and thereby might offer an additional safety switch in case viral replication related side effects are encountered.

The efficacy and potential risks of controlling sprouting in Finnish birches (Betula spp.) with the fungal decomposer Chondrostereum purpureum

Sprouting of fast-growing broad-leaved trees causes problems in young coniferous stands, under power transmission lines and along roads and railways. Public opinion and the Finnish Forest Certification System oppose the use of chemical herbicides to control sprouting, which means that most areas with problems rely on mechanical cutting. However, cutting is a poor control method for many broad-leaved species because the removal of leaders can stimulate the sprouting of side branches and cut stumps quickly re-sprout. In order to be effective, cutting must be carried out frequently but each cut increases the costs, making this control method increasingly difficult and expensive once begun. As such, alternative methods for sprout control that are both effective and environmentally sound represent a continuing challenge to managers and research biologists. Using biological control agents to prevent sprouting has been given serious consideration recently. Dutch and Canadian researchers have demonstrated the potential of the white-rot fungus Chondrostereum purpureum (Pers. ex Fr.) Pouzar as a control agent of stump sprouting in many hardwoods. These findings have focused the attention of the Finnish forestry community on the utilization of C. purpureum for biocontrol purposes. Primarily, this study sought determines the efficacy of native C. purpureum as an inhibitor of birch stump sprouting in Finland and to clarify its mode of action. Additionally, genotypic variation in Finnish C. purpureum was examined and the environmental risks posed by a biocontrol program using this fungus were assessed. Experimental results of the study demonstrated that C. purpureum clearly affects the sprouting of birch: both the frequency of living stumps and the number of living sprouts per stump were effectively reduced by the treatment. However, the treatment had no effect on the maximum height of new sprouts. There were clear differences among fungal isolates in preventing sprouting and those that possessed high oxidative activities as measured in the laboratory inhibited sprouting most efficiently in the field. The most effective treatment time during the growing season was in early and mid summer (May July). Genetic diversity in Nordic and Baltic populations of C. purpureum was found to be high at the regional scale but locally homogeneous. This natural distribution of diversity means that using local genotypes in biocontrol programs would effectively prevent the introduction of novel genes or genotypes. While a biocontrol program using local strains of C. purpureum would be environmentally neutral, pruned birches that are close to the treatment site would have a high susceptibility to infect by the fungus during the early spring.

Fine-tuning of the signalling network controlling morphogenesis and stem cell development in teeth

Tooth development is regulated by sequential and reciprocal interactions between epithelium and mesenchyme. The molecular mechanisms underlying this regulation are conserved and most of the participating molecules belong to several signalling families. Research focusing on mouse teeth has uncovered many aspects of tooth development, including molecular and evolutionary specifi cs, and in addition offered a valuable system to analyse the regulation of epithelial stem cells. In mice the spatial and temporal regulation of cell differentiation and the mechanisms of patterning during development can be analysed both in vivo and in vitro. Follistatin (Fst), a negative regulator of TGFβ superfamily signalling, is an important inhibitor during embryonic development. We showed the necessity of modulation of TGFβ signalling by Fst in three different regulatory steps during tooth development. First we showed that tinkering with the level of TGFβ signalling by Fst may cause variation in the molar cusp patterning and crown morphogenesis. Second, our results indicated that in the continuously growing mouse incisors asymmetric expression of Fst is responsible for the labial-lingual patterning of ameloblast differentiation and enamel formation. Two TGFβ superfamily signals, BMP and Activin, are required for proper ameloblast differentiation and Fst modulates their effects. Third, we identifi ed a complex signalling network regulating the maintenance and proliferation of epithelial stem cells in the incisor, and showed that Fst is an essential modulator of this regulation. FGF3 in cooperation with FGF10 stimulates proliferation of epithelial stem cells and transit amplifying cells in the labial cervical loop. BMP4 represses Fgf3 expression whereas Activin inhibits the repressive effect of BMP4 on the labial side. Thus, Fst inhibits Activin rather than BMP4 in the cervical loop area and limits the proliferation of lingual epithelium, thereby causing the asymmetric maintenance and proliferation of epithelial stem cells. In addition, we detected Lgr5, a Wnt target gene and an epithelial stem cell marker in the intestine, in the putative epithelial stem cells of the incisor, suggesting that Lgr5 is a marker of incisor stem cells but is not regulated by Wnt/β-catenin signalling in the incisor. Thus the epithelial stem cells in the incisor may not be directly regulated by Wnt/β-catenin signalling. In conclusion, we showed in the mouse incisors that modulating the balance between inductive and inhibitory signals constitutes a key mechanism regulating the epithelial stem cells and ameloblast differentiation. Furthermore, we found additional support for the location of the putative epithelial stem cells and for the stemness of these cells. In the mouse molar we showed the necessity of fi ne-tuning the signalling in the regulation of the crown morphogenesis, and that altering the levels of an inhibitor can cause variation in the crown patterning.

Factors controlling the surface energy budget over snow and ice

Polar Regions are an energy sink of the Earth system, as the Sun rays do not reach the Poles for half of the year, and hit them only at very low angles for the other half of the year. In summer, solar radiation is the dominant energy source for the Polar areas, therefore even small changes in the surface albedo strongly affect the surface energy balance and, thus, the speed and amount of snow and ice melting. In winter, the main heat sources for the atmosphere are the cyclones approaching from lower latitudes, and the atmosphere-surface heat transfer takes place through turbulent mixing and longwave radiation, the latter dominated by clouds. The aim of this thesis is to improve the knowledge about the surface and atmospheric processes that control the surface energy budget over snow and ice, with particular focus on albedo during the spring and summer seasons, on horizontal advection of heat, cloud longwave forcing, and turbulent mixing during the winter season. The critical importance of a correct albedo representation in models is illustrated through the analysis of the causes for the errors in the surface and near-surface air temperature produced in a short-range numerical weather forecast by the HIRLAM model. Then, the daily and seasonal variability of snow and ice albedo have been examined by analysing field measurements of albedo, carried out in different environments. On the basis of the data analysis, simple albedo parameterizations have been derived, which can be implemented into thermodynamic sea ice models, as well as numerical weather prediction and climate models. Field measurements of radiation and turbulent fluxes over the Bay of Bothnia (Baltic Sea) also allowed examining the impact of a large albedo change during the melting season on surface energy and ice mass budgets. When high contrasts in surface albedo are present, as in the case of snow covered areas next to open water, the effect of the surface albedo heterogeneity on the downwelling solar irradiance under overcast condition is very significant, although it is usually not accounted for in single column radiative transfer calculations. To account for this effect, an effective albedo parameterization based on three-dimensional Monte Carlo radiative transfer calculations has been developed. To test a potentially relevant application of the effective albedo parameterization, its performance in the ground-based retrieval of cloud optical depth was illustrated. Finally, the factors causing the large variations of the surface and near-surface temperatures over the Central Arctic during winter were examined. The relative importance of cloud radiative forcing, turbulent mixing, and lateral heat advection on the Arctic surface temperature were quantified through the analysis of direct observations from Russian drifting ice stations, with the lateral heat advection calculated from reanalysis products.

Change detection and controlling forest information using multi-temporal Landsat TM imagery.

A method was developed for relative radiometric calibration of single multitemporal Landsat TM image, several multitemporal images covering each others, and several multitemporal images covering different geographic locations. The radiometricly calibrated difference images were used for detecting rapid changes on forest stands. The nonparametric Kernel method was applied for change detection. The accuracy of the change detection was estimated by inspecting the image analysis results in field. The change classification was applied for controlling the quality of the continuously updated forest stand information. The aim was to ensure that all the manmade changes and any forest damages were correctly updated including the attribute and stand delineation information. The image analysis results were compared with the registered treatments and the stand information base. The stands with discrepancies between these two information sources were recommended to be field inspected.