A Continuation of the Happiness Success Story: Does Happiness Impact Service Quality?

A Continuation of the Happiness Success Story: Does Happiness Impact Service Quality? The effects of long-term happiness on various outcomes for the individual and society have been studied extensively in psychology but the concept has so far received limited research attention in marketing. Happiness is defined as a summary judgment of one’s life. Previous research has shown that happiness is a relatively stable perception of happiness in one’s life. Thus, happiness in this thesis is long-term and more global as a phenomenon than in the marketing literature, where happiness is commonly conceptualized as an emotion, feeling or momentary state of happiness. Although there is plenty of research on consumer affect and its impact on service responses, there are no studies on the effect of long-term happiness on service evaluation. As empirical evidence suggests that happy people perceive smaller and bigger events in life more positively than less happy people and that happy people are more prone to experience positive feelings and less of negative feelings it was hypothesized that happiness affects service quality directly but also indirectly through mood. Therefore, in this thesis, it was set out to explore if happiness affects customer-perceived service quality. A survey method was adopted to study the relationship between happiness, mood and service quality. Two studies were conducted with a total of 17 investigated services. Out of the 17 different investigated cases, happiness was found to positively affect service quality in only four cases. The results from the two studies also provide weak support for a positive relationship between mood and service quality. Out of the 17 cases, mood was found to positively affect service quality in only three cases and the results provide additional evidence for the stream of literature arguing that affect plays no or only a minimal role in service quality. Based on the collective results in this study, it can be concluded that the evidence for a positive relationship between happiness, mood and service quality is weak. However, in this thesis, it was recognized that the happiness concept is relevant for marketers and serve potential to explain marketing related phenomena. Marketing researchers who are interested in studying happiness are advised to focus research attention on consumer well-being.

Effect of waiting time on health outcomes and service utilization : A prospective randomized study on patients admitted to hospital for hip or knee replacement

Although the principle of equal access to medically justified treatment has been promoted by official health policies in many Western health care systems, practices do not completely meet policy targets. Waiting times for elective surgery vary between patient groups and regions, and growing problems in the availability of services threaten equal access to treatment. Waiting times have come to the attention of decision-makers, and several policy initiatives have been introduced to ensure the availability of care within a reasonable time. In Finland, for example, the treatment guarantee came into force in 2005. However, no consensus exists on optimal waiting time for different patient groups. The purpose of this multi-centre randomized controlled trial was to analyse health-related quality of life, pain and physical function in total hip or knee replacement patients during the waiting time and to evaluate whether the waiting time is associated with patients health outcomes at admission. This study also assessed whether the length of waiting time is associated with social and health services utilization in patients awaiting total hip or knee replacement. In addition, patients health-related quality of life was compared with that of the general population. Consecutive patients with a need for a primary total hip or knee replacement due to osteoarthritis were placed on the waiting list between August 2002 and November 2003. Patients were randomly assigned to a short waiting time (maximum 3 months) or a non-fixed waiting time (waiting time not fixed in advance, instead the patient followed the hospitals routine practice). Patients health-related quality of life was measured upon being placed on the waiting list and again at hospital admission using the generic 15D instrument. Pain and physical function were evaluated using the self-report Harris Hip Score for hip patients and a scale modified from the Knee Society Clinical Rating System for knee patients. Utilization measures were the use of home health care, rehabilitation and social services, physician visits and inpatient care. Health and social services use was low in both waiting time groups. The most common services used while waiting were rehabilitation services and informal care, including unpaid care provided by relatives, neighbours and volunteers. Although patients suffered from clear restrictions in usual activities and physical functioning, they seemed primarily to lean on informal care and personal networks instead of professional care. While longer waiting time did not result in poorer health-related quality of life at admission and use of services during the waiting time was similar to that at the time of placement on the list, there is likely to be higher costs of waiting by people who wait longer simply because they are using services for a longer period. In economic terms, this would represent a negative impact of waiting. Only a few reports have been published of the health-related quality of life of patients awaiting total hip or knee replacement. These findings demonstrate that, in addition to physical dimensions of health, patients suffered from restrictions in psychological well-being such as depression, distress and reduced vitality. This raises the question of how to support patients who suffer from psychological distress during the waiting time and how to develop strategies to improve patients initiatives to reduce symptoms and the burden of waiting. Key words: waiting time, total hip replacement, total knee replacement, health-related quality of life, randomized controlled trial, outcome assessment, social service, utilization of health services

Quality Assessment of a Forest Inventory Based on Airborne Laser Scanning

In this study, a quality assessment method based on sampling of primary laser inventory units (microsegments) was analysed. The accuracy of a laser inventory carried out in Kuhmo was analysed as a case study. Field sample plots were measured on the sampled microsegments in the Kuhmo inventory area. Two main questions were considered. Did the ALS based inventory meet the accuracy requirements set for the provider and how should a reliable, cost-efficient and independent quality assessment be undertaken. The agreement between control measurement and ALS based inventory was analysed in four ways: 1) The root mean squared errors (RMSEs) and bias were calculated. 2) Scatter plots with 95% confidence intervals were plotted and the placing of identity lines was checked. 3) Bland-Altman plots were drawn so that the mean difference of attributes between the control method and ALS-method was calculated and plotted against average value of attributes. 4) The tolerance limits were defined and combined with Bland-Altman plots. The RMSE values were compared to a reference study from which the accuracy requirements had been set to the service provider. The accuracy requirements in Kuhmo were achieved, however comparison of RMSE values proved to be difficult. Field control measurements are costly and time-consuming, but they are considered to be robust. However, control measurements might include errors, which are difficult to take into account. Using the Bland-Altman plots none of the compared methods are considered to be completely exact, so this offers a fair way to interpret results of assessment. The tolerance limits to be set on order combined with Bland-Altman plots were suggested to be taken in practise. In addition, bias should be calculated for total area. Some other approaches for quality control were briefly examined. No method was found to fulfil all the required demands of statistical reliability, cost-efficiency, time efficiency, simplicity and speed of implementation. Some benefits and shortcomings of the studied methods were discussed.

Service firms´ action upon negative incidents in high touch services: A narrative study

The study concerns service management, and specifically the action service firms take with regard to customer dissatisfaction, customer complaints and complaining customers in high touch services. Customer dissatisfaction, customer complaints and complaining customers are called negative incidents in the study. The study fills a research gap in service management studies by investigating negative incidents as a part of an open service system. In contrast to main stream service management studies defining service quality as how the customer as a consumer defines it, in the present study, the concept of interactive service quality is adopted. The customer is considered as a co-producer of service who thus has a role to play in service quality and productivity. Additionally, the study juxtaposes the often opposed perspectives of the manager and the customer as well as the often forgotten silent voices of service employees and supervisors. The study proposes that the service firm as an entity does not act but it is the actors at the different hierarchical layers who act. Additionally, it is acknowledged in the study that the different actors at the different hierarchical layers have different knowledge of the service system and different objectives for service encounters. Therefore, they interpret the negative incidents from different perspectives and their actions upon negative incidents are subsequently guided by their interpretations. The research question is: how do service firms act upon negative incidents in high touch services? In order to answer to the research question a narrative research approach was chosen. The actors at the different hierarchical layers acted as informants of the study and provided stories about customer dissatisfaction, customer complaining and complaint handling in high touch services. Through storytelling, access to the socially constructed reality of service firms’ action was achieved. Stemming from the literature review, analysis of empirical data and my theoretical thinking, a theory about service firms’ action upon negative incidents in high touch services was developed and the research question was answered. The study contributes to service recovery and complaint management studies as well as to studies on customer orientation and its implementation in service firms. Additionally, the study has a methodological contribution to service management studies since it reflects service firms’ action with narratives from multiple perspectives. The study is positioned in the tradition of the Nordic School of Marketing Thought and presents service firms’ action upon negative incidents in high touch services as a complex human-centered phenomenon in which the actors at the different hierarchical layers have crucial roles to play. Ritva Höykinpuro is associated with CERS, the Centre for Relationship Marketing and Service Management at Hanken School of Economics.

Customer Value in E-Service: Conceptual Foundation and Empirical Evidence

Customer value has been identified as “the reason” for customers to patronize a firm, and as one of the fundamental blocks that market exchanges build upon. Despite the importance of customer value, it is often poorly defined, or seems to refer to different phenomena. This dissertation contributes to current marketing literature by subjecting the value concept to a critical investigation, and by clarifying its conceptual foundation. Based on the literature review, it is proposed that customer value can be divided into two separate, but interrelated aspects: value creation processes, and value outcome determination. This means that on one hand, it is possible to examine those activities through which value is created, and on the other hand, investigate how customers determine the value outcomes they receive. The results further show that customers may determine value in four different ways: value as a benefit/sacrifice ratio, as experience outcomes, as means-end chains, and value as phenomenological. In value as benefit/sacrifice ratio, customers are expected to calculate the ratio between service benefits (e.g. ease of use) and sacrifices (e.g. price). In value as experience outcomes, customers are suggested to experience multiple value components, such as functional, emotional, or social value. Customer value as means-ends chains in turn models value in terms of the relationships between service characteristics, use value, and desirable ends (e.g. social acceptance). Finally, value as phenomenological proposes that value emerges from lived, holistic experiences. The empirical papers investigate customer value in e-services, including online health care and mobile services, and show how value in e-service stems from the process and content quality, use context, and the service combination that a customer uses. In conclusion, marketers should understand that different value definitions generate different types of understanding of customer value. In addition, it is clear that studying value from several perspectives is useful, as it enables a richer understanding of value for the different actors. Finally, the interconnectedness between value creation and determination is surprisingly little researched, and this dissertation proposes initial steps towards understanding the relationship between the two.

Service Productivity: Toward a Conceptualisation of the Transformation of inputs

The productivity of a process is related to how effectively input resources are transformed into value for customers. For the needs of manufacturers of physical products there are widely used productivity concepts and measurements instruments. However, in service processes the underlying assumptions of these concepts and models do not hold. For example, manufacturing-based productivity models assume that an altered configuration of input resources in the production process does not lead to quality changes in outputs (the constant-quality assumption). However, in a service context changes in the production resources and productions systems do affect the perceived quality of services. Therefore, using manufacturing-oriented productivity models in service contexts are likely to give managers wrong directions for action. Research into the productivity of services is still scarce, because of the lack of viable models. The purpose of the present article is to analyse the requirements for the development of a productivity concept for service operations. Based on the analysis, a service productivity model is developed. According to this model, service productivity is a function of 1) how effectively input resources into the service (production) process are transformed to outputs in the form of services (internal or cost efficiency), 2) how well the quality of the service process and its outcome is perceived (external or revenue efficiency), and 3) how effectively the capacity of the service process is utilised (capacity efficiency). In addition, directions for developing measurement models for service productivity are discussed.

Dimensionality of quality from a customer perspective in the wood industry

The research analyzes product quality from a customer perspective in the case of the wood products industry. Of specific interest is to understand better how environmental quality is perceived from a customer perspective. The empirical material used comprises four data-sets from Finland, Germany and the UK, collected during 1992 2004. The methods consist of a set of quantitative statistical analyses. The results indicate that perceived quality from a customer perspective can be presented using a multidimensional and hierarchical construct with tangible and intangible dimensions, that is common to different markets and products. This applies in the case of wood products but also more generally at least for some other construction materials. For wood products, tangible product quality has two main sub-dimensions: technical quality and appearance. For product intangibles, a few main quality dimensions seem be detectable: Quality of intangibles related to the physical product, such as environmental issues and product-related information, supplier-related characteristics, and service and sales personnel behavior. Environmental quality and information are often perceived as being inter-related. Technical performance and appearance are the most important considerations for customers in the case of wood products. Organizational customers in particular also clearly consider certain intangible quality dimensions to be important, such as service and supplier reliability. The high technical quality may be considered as a license to operate , but product appearance and intangible quality provide potential for differentiation for attracting certain market segments. Intangible quality issues are those where Nordic suppliers underperform in comparison to their Central-European competitors on the important German markets. Environmental quality may not have been used to its full extent to attract customers. One possibility is to increase the availability of the environment-related information, or to develop environment-related product characteristics to also provide some individual benefits. Information technology provides clear potential to facilitate information-based quality improvements, which was clearly recognized by Finnish forest industry already in the early 1990s. The results indeed indicate that wood products markets are segmented with regard to quality demands