The effect of temperature on height growth of Scots pine in northern Finland

The effect of temperature on height growth of Scots pine in the northern boreal zone in Lapland was studied in two different time scales. Intra-annual growth was monitored in four stands in up to four growing seasons using an approximately biweekly measurement interval. Inter-annual growth was studied using growth records representing seven stands and five geographical locations. All the stands were growing on a dry to semi-dry heath that is a typical site type for pine stands in Finland. The applied methodology is based on applied time-series analysis and multilevel modelling. Intra-annual elongation of the leader shoot correlated with temperature sum accumulation. Height growth ceased when, on average, 41% of the relative temperature sum of the site was achieved (observed minimum and maximum were 38% and 43%). The relative temperature sum was calculated by dividing the actual temperature sum by the long-term mean of the total annual temperature sum for the site. Our results suggest that annual height growth ceases when a location-specific temperature sum threshold is attained. The positive effect of the mean July temperature of the previous year on annual height increment proved to be very strong at high latitudes. The mean November temperature of the year before the previous had a statistically significantly effect on height increment in the three northernmost stands. The effect of mean monthly precipitation on annual height growth was statistically insignificant. There was a non-linear dependence between length and needle density of annual shoots. Exceptionally low height growth results in high needle-density, but the effect is weaker in years of average or good height growth. Radial growth and next year s height growth are both largely controlled by current July temperature. Nevertheless, their growth variation in terms of minimum and maximum is not necessarily strongly correlated. This is partly because height growth is more sensitive to changes in temperature. In addition, the actual effective temperature period is not exactly the same for these two growth components. Yet, there is a long-term balance that was also statistically distinguishable; radial growth correlated significantly with height growth with a lag of 2 years. Temperature periods shorter than a month are more effective variables than mean monthly values, but the improvement is on the scale of modest to good when applying Julian days or growing-degree-days as pointers.

The Effect of Food-Related Lifestyle on the Choices of Consumers of Five Food Products

The purpose of this study was to find out whether food-related lifestyle guides and explains product evaluations, specifically, consumer perceptions and choice evaluations of five different food product categories: lettuce, mincemeat, savoury sauce, goat cheese, and pudding. The opinions of consumers who shop in neighbourhood stores were considered most valuable. This study applies means-end chain (MEC) theory, according to which products are seen as means by which consumers attain meaningful goals. The food-related lifestyle (FRL) instrument was created to study lifestyles that reflect these goals. Further, this research has adopted the view that the FRL functions as a script which guides consumer behaviour. Two research methods were used in this study. The first was the laddering interview, the primary aim of which was to gather information for formulating the questionnaire of the main study. The survey consisted of two separate questionnaires. The first was the FRL questionnaire modified for this study. The aim of the other questionnaire was to determine the choice criteria for buying five different categories of food products. Before these analyses could be made, several data modifications were made following MEC analysis procedures. Beside forming FRL dimensions by counting sum-scores from the FRL statements, factor analysis was run in order to elicit latent factors underlying the dimensions. The lifestyle factors found were adventurous, conscientious, enthusiastic, snacking, moderate, and uninvolved lifestyles. The association analyses were done separately for each choice of product as well as for each attribute-consequence linkage with a non-parametric Mann-Whitney U test. The testing variables were FRL dimensions and the FRL lifestyle factors. In addition, the relation between the attribute-consequence linkages and the demographic variables were analysed. Results from this study showed that the choice of product is sequential, so that consumers first categorize products into groups based on specific criteria like health or convenience. It was attested that the food-related lifestyles function as a script in food choice and that the FRL instrument can be used to predict consumer buying behaviour. Certain lifestyles were associated with the choice of each product category. The actual product choice within a product category then appeared to be a different matter. In addition, this study proposes a modification to the FRL instrument. The positive towards advertising FRL dimension was modified to examine many kinds of information search including the internet, TV, magazines, and other people. This new dimension, which was designated as being open to additional information, proved to be very robust and reliable in finding differences in consumer choice behaviour. Active additional information search was linked to adventurous and snacking food-related lifestyles. The results of this study support the previous knowledge that consumers expect to get many benefits simultaneously when they buy food products. This study brought detailed information about the benefits sought, the combination of benefits differing between products and between respondents. Household economy, pleasure and quality were emphasized with the choice of lettuce. Quality was the most significant benefit in choosing mincemeat, but health related benefits were often evaluated as well. The dominant benefits linked to savoury sauce were household economic benefits, expected pleasurable experiences, and a lift in self-respect. The choice of goat cheese appeared not to be an economic decision, self-respect, pleasure, and quality being included in the choice criteria. In choosing pudding, the respondents considered the well-being of family members, and indulged their family members or themselves.

Characterisation and processing of amorphous binary mixtures with low glass transition temperature

The number of drug substances in formulation development in the pharmaceutical industry is increasing. Some of these are amorphous drugs and have glass transition below ambient temperature, and thus they are usually difficult to formulate and handle. One reason for this is the reduced viscosity, related to the stickiness of the drug, that makes them complicated to handle in unit operations. Thus, the aim in this thesis was to develop a new processing method for a sticky amorphous model material. Furthermore, model materials were characterised before and after formulation, using several characterisation methods, to understand more precisely the prerequisites for physical stability of amorphous state against crystallisation. The model materials used were monoclinic paracetamol and citric acid anhydrate. Amorphous materials were prepared by melt quenching or by ethanol evaporation methods. The melt blends were found to have slightly higher viscosity than the ethanol evaporated materials. However, melt produced materials crystallised more easily upon consecutive shearing than ethanol evaporated materials. The only material that did not crystallise during shearing was a 50/50 (w/w, %) blend regardless of the preparation method and it was physically stable at least two years in dry conditions. Shearing at varying temperatures was established to measure the physical stability of amorphous materials in processing and storage conditions. The actual physical stability of the blends was better than the pure amorphous materials at ambient temperature. Molecular mobility was not related to the physical stability of the amorphous blends, observed as crystallisation. Molecular mobility of the 50/50 blend derived from a spectral linewidth as a function of temperature using solid state NMR correlated better with the molecular mobility derived from a rheometer than that of differential scanning calorimetry data. Based on the results obtained, the effect of molecular interactions, thermodynamic driving force and miscibility of the blends are discussed as the key factors to stabilise the blends. The stickiness was found to be affected glass transition and viscosity. Ultrasound extrusion and cutting were successfully tested to increase the processability of sticky material. Furthermore, it was found to be possible to process the physically stable 50/50 blend in a supercooled liquid state instead of a glassy state. The method was not found to accelerate the crystallisation. This may open up new possibilities to process amorphous materials that are otherwise impossible to manufacture into solid dosage forms.

The effect of interrogative function on intonation in spontaneous and read Finnish

Goals This study aims to map the effect of interrogative function on the intonation of spontaneous and read Finnish. Earlier research shows that the most prominent feature in Finnish question intonation is an appeal to the listener. Question word questions typically start with a high peak which is followed by falling intonation. In yes/no questions, F0 remains on a high level until the word carrying sentence stress and then falls. Final rises are mainly found in intonation clichés such as "Ai mitä?" ("What?") These earlier results are based on read speech and enacted dialogues. In this study, questions and statements found in spontaneous dialogues were compared. These utterances were also compared with read versions of the same utterances. Fundamental frequency values were compared using a mixed model. Contours were also grouped using auditory and visual inspection. Thus it was possible to compare frequencies of contour types according to utterance type and speech style. The position of questions in the F0 distribution of the whole material was also investigated in this study. Method The material consisted of four spontaneous dialogues and their read versions. The speakers were young adults from the Helsinki metropolitan area, four females and four males. The whole material was first divided into broad dialogue function categories arising from the material and F0 curves were calculated for each category. After this, 277 questions and 244 statements were selected for closer inspection. Values reflecting F0 distribution and contour shape were measured from the F0 contours of these utterances. A mixed model was used to analyse the differences. Utterance type, question type, speech style and speaker gender were used as fixed effects. The frequencies of F0 contour types were compared using a Chi square test. Additional material in this study came from eight young female speakers in central Finland. Results and conclusions In the mixed model analysis, significant differences were found both between questions and statements and between spontaneous and read speech. Generally, utterance type affected the variables reflecting contour type while speech style affected the variables reflecting F0 distribution. The effect of question type was not clearly visible. In read speech the contours resembled earlier results more closely. Speakers had different strategies in differentiating between questions and statements. In the whole material, F0 was slightly higher in questions than in statements. The effect of dialectal background could be seen in the contour types. The results show that interrogative function affects intonation in both spontaneous and read Finnish.

Widening Perspectives of Teacher Education : Studies on theory-practice relationship, reflection, research and professional development

This dissertation examined the research-based teacher education at the University of Helsinki from different theoretical and practical perspectives. Five studies focused on these perspectives separately as well as overlappingly. Study I focused on the reflection process of graduating teacher students. The data consisted of essays the students wrote as their last assignment before graduating, where their assignment was to examine their development as researchers during their MA thesis research process. The results indicated that the teacher students had analysed their own development thoroughly during the process and that they had reflected on theoretical as well as practical educational matters. The results also pointed out that, in the students’ opinion, personally conducted research is a significant learning process. -- Study II investigated teacher students’ workplace learning and the integration of theory and practice in teacher education. The students’ interviews focused on their learning of teacher’s work prior to education. The interviewees’ responses concerning their ‘surviving’ in teaching prior to teacher education were categorized into three categories: learning through experiences, school as a teacher learning environment, and case-specific learning. The survey part of the study focused on integration of theory and practice within the education process. The results showed that the students who worked while they studied took advantage of the studies and applied them to work. They set more demanding teaching goals and reflected on their work more theoretically. -- Study III examined practical aspects of the teacher students’ MA thesis research as well as the integration of theory and practice in teacher education. The participants were surveyed using a web-based survey which dealt with the participants’ teacher education experiences. According to the results, most of the students had chosen a practical topic for their MA thesis, one arising from their work environment, and most had chosen a research topic that would develop their own teaching. The results showed that the integration of theory and practice had taken place in much of the course work, but most obviously in the practicum periods, and also in the courses concerning the school subjects. The majority felt that the education had in some way been successful with regards to integration. -- Study IV explored the idea of considering teacher students’ MA thesis research as professional development. Twenty-three teachers were interviewed on the subject of their experiences of conducting research about their own work as teachers. The results of the interviews showed that the reasons for choosing the MA thesis research topic were multiple: practical, theoretical, personal, professional reasons, as well as outside effect. The objectives of the MA thesis research, besides graduating, were actual projects, developing the ability to work as teachers, conducting significant research, and sharing knowledge of the topic. The results indicated that an MA thesis can function as a tool for professional development, for example in finding ways for adjusting teaching, increasing interaction skills, gaining knowledge or improving reflection on theory and/or practice, strengthening self-confidence as a teacher, increasing researching skills or academic writing skills, as well as becoming critical and being able to read scientific and academic literature. -- Study V analysed teachers’ views of the impact of practitioner research. According to the results, the interviewees considered the benefits of practitioner research to be many, affecting teachers, pupils, parents, the working community, and the wider society. Most of the teachers indicated that they intended to continue to conduct research in the future. The results also showed that teachers often reflected personally and collectively, and viewed this as important. -- These five studies point out that MA thesis research is and can be a useful tool for increasing reflection doing with personal and professional development, as well as integrating theory and practice. The studies suggest that more advantage could be taken of the MA thesis research project. More integration of working and studying could and should be made possible for teacher students. This could be done in various ways within teacher education, but the MA thesis should be seen as a pedagogical possibility.

Lähiympäristö nepalilaisessa arjessa - oppilaiden ja opettajien käsityksiä omista vaikutusmahdollisuuksistaan

Aims. Sustainable development has become the most important theme in the development co-operation in the 21st century. Sustainable development is pursued by environmental education among other things. This research rose from the discussion about the meaning of environmental education in developing countries and especially the effect it might have in the environment and society. Nepal and one of its rural private schools was selected as a research object. The themes and questions of the research are: 1. Conceptions of the immediate environment of students and teachers: What does immediate environment mean according to the students and teachers? 2. Students most important acts in the environment: What kind of effect do the students think they can have on the environment in their everyday life? 3. Teachers opinions, experiences and methods in environmental education: What do teachers think should be taught to the students in environmental education? What are the teachers actually teaching? What kind of methods are the teachers using while teaching environmental education? Researching the conceptions of immediate environment and acts in the environment gives information about the students and teachers relation with the nature in their everyday life and the baseline from which environmental education will be implemented from. Teachers opinions, experiences and methods in environmental education provide information on the current implementation of the environmental education. Methods. Ethnography was selected as a research method. Before collecting the actual data, a pre-study was conducted. The aim of the pre-study was to specify the research themes and practice the cross-cultural interview as a research method. The actual data was collected in the last week of January 2010 in Dhangadhi, Nepal. The data included twenty-two drawings and captions from the students and one group interview with the teachers. The data was analyzed with brief quantitative analysis and full analysis was done with a qualitative method called content analysis. Results and conclusions. Teachers and student s conceptions of immediate environment differ from each other. Students saw the immediate environment from the scientific approach while the teachers thought it was more social conception. The interface was found in their own personal environment. This interface is a good baseline for environmental education. The most important acts in the environment for the students were protection towards the environment. The students saw their possibilities to have an influence in the environment through the school. A connection between the school and acting in the environment was evident. In the teachers opinions and experiences of environmental education, environmental problems and the importance of teaching attitudes and values were found. No logic thematic entities were discovered but the teachers did use different kinds of methods in their teaching. Achieving the international aims for environmental education was very challenging in the research school because of the teachers lack of information and skills to teach the subject. The context where the school works was also challenging.

Effect of waiting time on health outcomes and service utilization : A prospective randomized study on patients admitted to hospital for hip or knee replacement

Although the principle of equal access to medically justified treatment has been promoted by official health policies in many Western health care systems, practices do not completely meet policy targets. Waiting times for elective surgery vary between patient groups and regions, and growing problems in the availability of services threaten equal access to treatment. Waiting times have come to the attention of decision-makers, and several policy initiatives have been introduced to ensure the availability of care within a reasonable time. In Finland, for example, the treatment guarantee came into force in 2005. However, no consensus exists on optimal waiting time for different patient groups. The purpose of this multi-centre randomized controlled trial was to analyse health-related quality of life, pain and physical function in total hip or knee replacement patients during the waiting time and to evaluate whether the waiting time is associated with patients health outcomes at admission. This study also assessed whether the length of waiting time is associated with social and health services utilization in patients awaiting total hip or knee replacement. In addition, patients health-related quality of life was compared with that of the general population. Consecutive patients with a need for a primary total hip or knee replacement due to osteoarthritis were placed on the waiting list between August 2002 and November 2003. Patients were randomly assigned to a short waiting time (maximum 3 months) or a non-fixed waiting time (waiting time not fixed in advance, instead the patient followed the hospitals routine practice). Patients health-related quality of life was measured upon being placed on the waiting list and again at hospital admission using the generic 15D instrument. Pain and physical function were evaluated using the self-report Harris Hip Score for hip patients and a scale modified from the Knee Society Clinical Rating System for knee patients. Utilization measures were the use of home health care, rehabilitation and social services, physician visits and inpatient care. Health and social services use was low in both waiting time groups. The most common services used while waiting were rehabilitation services and informal care, including unpaid care provided by relatives, neighbours and volunteers. Although patients suffered from clear restrictions in usual activities and physical functioning, they seemed primarily to lean on informal care and personal networks instead of professional care. While longer waiting time did not result in poorer health-related quality of life at admission and use of services during the waiting time was similar to that at the time of placement on the list, there is likely to be higher costs of waiting by people who wait longer simply because they are using services for a longer period. In economic terms, this would represent a negative impact of waiting. Only a few reports have been published of the health-related quality of life of patients awaiting total hip or knee replacement. These findings demonstrate that, in addition to physical dimensions of health, patients suffered from restrictions in psychological well-being such as depression, distress and reduced vitality. This raises the question of how to support patients who suffer from psychological distress during the waiting time and how to develop strategies to improve patients initiatives to reduce symptoms and the burden of waiting. Key words: waiting time, total hip replacement, total knee replacement, health-related quality of life, randomized controlled trial, outcome assessment, social service, utilization of health services