Markov random fields and spatial smoothing in improving of forest inventory estimates

Markov random fields (MRF) are popular in image processing applications to describe spatial dependencies between image units. Here, we take a look at the theory and the models of MRFs with an application to improve forest inventory estimates. Typically, autocorrelation between study units is a nuisance in statistical inference, but we take an advantage of the dependencies to smooth noisy measurements by borrowing information from the neighbouring units. We build a stochastic spatial model, which we estimate with a Markov chain Monte Carlo simulation method. The smooth values are validated against another data set increasing our confidence that the estimates are more accurate than the originals.

Novel Approaches to the Sampling of Atmospheric Aerosols and Determination of Chemical Composition

The Earth s climate is a highly dynamic and complex system in which atmospheric aerosols have been increasingly recognized to play a key role. Aerosol particles affect the climate through a multitude of processes, directly by absorbing and reflecting radiation and indirectly by changing the properties of clouds. Because of the complexity, quantification of the effects of aerosols continues to be a highly uncertain science. Better understanding of the effects of aerosols requires more information on aerosol chemistry. Before the determination of aerosol chemical composition by the various available analytical techniques, aerosol particles must be reliably sampled and prepared. Indeed, sampling is one of the most challenging steps in aerosol studies, since all available sampling techniques harbor drawbacks. In this study, novel methodologies were developed for sampling and determination of the chemical composition of atmospheric aerosols. In the particle-into-liquid sampler (PILS), aerosol particles grow in saturated water vapor with further impaction and dissolution in liquid water. Once in water, the aerosol sample can then be transported and analyzed by various off-line or on-line techniques. In this study, PILS was modified and the sampling procedure was optimized to obtain less altered aerosol samples with good time resolution. A combination of denuders with different coatings was tested to adsorb gas phase compounds before PILS. Mixtures of water with alcohols were introduced to increase the solubility of aerosols. Minimum sampling time required was determined by collecting samples off-line every hour and proceeding with liquid-liquid extraction (LLE) and analysis by gas chromatography-mass spectrometry (GC-MS). The laboriousness of LLE followed by GC-MS analysis next prompted an evaluation of solid-phase extraction (SPE) for the extraction of aldehydes and acids in aerosol samples. These two compound groups are thought to be key for aerosol growth. Octadecylsilica, hydrophilic-lipophilic balance (HLB), and mixed phase anion exchange (MAX) were tested as extraction materials. MAX proved to be efficient for acids, but no tested material offered sufficient adsorption for aldehydes. Thus, PILS samples were extracted only with MAX to guarantee good results for organic acids determined by liquid chromatography-mass spectrometry (HPLC-MS). On-line coupling of SPE with HPLC-MS is relatively easy, and here on-line coupling of PILS with HPLC-MS through the SPE trap produced some interesting data on relevant acids in atmospheric aerosol samples. A completely different approach to aerosol sampling, namely, differential mobility analyzer (DMA)-assisted filter sampling, was employed in this study to provide information about the size dependent chemical composition of aerosols and understanding of the processes driving aerosol growth from nano-size clusters to climatically relevant particles (>40 nm). The DMA was set to sample particles with diameters of 50, 40, and 30 nm and aerosols were collected on teflon or quartz fiber filters. To clarify the gas-phase contribution, zero gas-phase samples were collected by switching off the DMA every other 15 minutes. Gas-phase compounds were adsorbed equally well on both types of filter, and were found to contribute significantly to the total compound mass. Gas-phase adsorption is especially significant during the collection of nanometer-size aerosols and needs always to be taken into account. Other aims of this study were to determine the oxidation products of β-caryophyllene (the major sesquiterpene in boreal forest) in aerosol particles. Since reference compounds are needed for verification of the accuracy of analytical measurements, three oxidation products of β-caryophyllene were synthesized: β-caryophyllene aldehyde, β-nocaryophyllene aldehyde, and β-caryophyllinic acid. All three were identified for the first time in ambient aerosol samples, at relatively high concentrations, and their contribution to the aerosol mass (and probably growth) was concluded to be significant. Methodological and instrumental developments presented in this work enable fuller understanding of the processes behind biogenic aerosol formation and provide new tools for more precise determination of biosphere-atmosphere interactions.

Irradiation effects in graphene and related materials

Nanomaterials with a hexagonally ordered atomic structure, e.g., graphene, carbon and boron nitride nanotubes, and white graphene (a monolayer of hexagonal boron nitride) possess many impressive properties. For example, the mechanical stiffness and strength of these materials are unprecedented. Also, the extraordinary electronic properties of graphene and carbon nanotubes suggest that these materials may serve as building blocks of next generation electronics. However, the properties of pristine materials are not always what is needed in applications, but careful manipulation of their atomic structure, e.g., via particle irradiation can be used to tailor the properties. On the other hand, inadvertently introduced defects can deteriorate the useful properties of these materials in radiation hostile environments, such as outer space. In this thesis, defect production via energetic particle bombardment in the aforementioned materials is investigated. The effects of ion irradiation on multi-walled carbon and boron nitride nanotubes are studied experimentally by first conducting controlled irradiation treatments of the samples using an ion accelerator and subsequently characterizing the induced changes by transmission electron microscopy and Raman spectroscopy. The usefulness of the characterization methods is critically evaluated and a damage grading scale is proposed, based on transmission electron microscopy images. Theoretical predictions are made on defect production in graphene and white graphene under particle bombardment. A stochastic model based on first-principles molecular dynamics simulations is used together with electron irradiation experiments for understanding the formation of peculiar triangular defect structures in white graphene. An extensive set of classical molecular dynamics simulations is conducted, in order to study defect production under ion irradiation in graphene and white graphene. In the experimental studies the response of carbon and boron nitride multi-walled nanotubes to irradiation with a wide range of ion types, energies and fluences is explored. The stabilities of these structures under ion irradiation are investigated, as well as the issue of how the mechanism of energy transfer affects the irradiation-induced damage. An irradiation fluence of 5.5x10^15 ions/cm^2 with 40 keV Ar+ ions is established to be sufficient to amorphize a multi-walled nanotube. In the case of 350 keV He+ ion irradiation, where most of the energy transfer happens through inelastic collisions between the ion and the target electrons, an irradiation fluence of 1.4x10^17 ions/cm^2 heavily damages carbon nanotubes, whereas a larger irradiation fluence of 1.2x10^18 ions/cm^2 leaves a boron nitride nanotube in much better condition, indicating that carbon nanotubes might be more susceptible to damage via electronic excitations than their boron nitride counterparts. An elevated temperature was discovered to considerably reduce the accumulated damage created by energetic ions in both carbon and boron nitride nanotubes, attributed to enhanced defect mobility and efficient recombination at high temperatures. Additionally, cobalt nanorods encapsulated inside multi-walled carbon nanotubes were observed to transform into spherical nanoparticles after ion irradiation at an elevated temperature, which can be explained by the inverse Ostwald ripening effect. The simulation studies on ion irradiation of the hexagonal monolayers yielded quantitative estimates on types and abundances of defects produced within a large range of irradiation parameters. He, Ne, Ar, Kr, Xe, and Ga ions were considered in the simulations with kinetic energies ranging from 35 eV to 10 MeV, and the role of the angle of incidence of the ions was studied in detail. A stochastic model was developed for utilizing the large amount of data produced by the molecular dynamics simulations. It was discovered that a high degree of selectivity over the types and abundances of defects can be achieved by carefully selecting the irradiation parameters, which can be of great use when precise pattering of graphene or white graphene using focused ion beams is planned.

Studies on Stone Age Housepits in Fennoscandia (4000 - 2000 cal BC) : Changes in ground plan, site location and degree of sedentism

Housepits have a remarkably short research history as compared to Fennoscandian archaeological research on the Stone Age in general. The current understanding of the numbers and the distribution of Stone Age housepits in the Nordic countries has, for the most part, been shaped by archaeological studies carried out over the last twenty to thirty years. The main subjects of this research are Neolithic housepits, which are archaeological remains of semi-subterranean pithouses. This dissertation consists of five peer-reviewed articles and a synthesis paper. The articles deal with the development of housepits as seen in the data gathered from Finland (the Lake Saimaa area and south-eastern Finland) and Russia (the Karelian Isthmus). This synthesis expands the discussion of the changes observed in the Papers to include Fennoscandian housepit research as a whole. Certain changes in the size, shape, environmental location, and clustering of housepits extended into various cultures and ecological zones in northern Fennoscandia. Previously, the evolution of housepits has been interpreted to have been caused by the adaptation of Neolithic societies to prevailing environmental circumstances or to re-organization following contacts with the agrarian Corded Ware/Battle Axe Cultures spreading to North. This dissertation argues for two waves of change in the pithouse building tradition. Both waves brought with them certain changes in the pithouses themselves and in the practices of locating the dwellings in the environment/landscape. The changes in housepits do not go hand in hand with other changes in material culture, nor are the changes restricted to certain ecological environments. Based on current information, it appears that the changes relate primarily to the spread of new concepts of housing and possibly to new technology, as opposed to representing merely a local response to environmental factors. This development commenced already before the birth of the Corded Ware/Battle Axe Cultures. Therefore, the changes are argued to have resulted from the spreading of new ideas through the same networks that actively distributed commodities, exotic goods, and raw materials over vast areas between the southern Baltic Sea, the north-west Russian forest zone, and Fennoscandia.

Metsänomistajille tarjottavat palvelut, palveluntarjoajat ja palvelukentän rakenne

Suomessa metsänomistajille on tarjolla neljäntyyppisiä eri palveluita metsänhoidossa, puukaupassa, omaisuudenhoidossa ja informaatiopalveluissa. Palveluita tarjoaa joukko hyvin erikokoisia organisaatioita, joista osa toimii markkinalähtöisesti toisten tarjotessa palveluitaan lakiperusteisesti. Metsäalan palvelumarkkinat ovat nyt murrosvaiheessa, ja muutoksia on tapahtumassa sekä tarjonta- että kysyntäkentässä. Metsänomistajille tarjottavien palveluiden markkinoita ei tarjoajanäkökulmasta ole aiemmin tutkittu kattavasti. Tutkimukset ovat usein keskittyneet suppeasti johonkin palvelulajiin, eikä kokonaiskuvausta palvelumarkkinoista omaisuudenhoitopalvelut mukaan lukien ole ollut tarjolla. Tarjoajakenttään on odotettavissa muutoksia, sillä metsäalan palvelumarkkinoiden rahoituspohjaa ollaan muuttamassa, jolloin markkinoiden kilpailu vapautuu nykytilanteeseen verrattuna. Muutokset koskevat etenkin lakisääteisten organisaatioiden toimintaa, mutta ne tulevat vaikuttamaan koko toimialaan. Kysyntäkentässä aiempi tutkimus on ollut kattavampaa. Etenkin metsänomistajarakenteen muutosta, joka johtuu pääasiassa metsätilojen siirtymisestä kaupungistuneelle sukupolvelle, on tutkittu runsaasti. Lisäksi palveluiden kysyntään vaikuttavia tekijöitä ja palvelun eri laatu-ulottuvuuksia on tutkittu. Voidaan kuitenkin epäillä, kyetäänkö markkinoilla tarjoamaan sellaisia palveluita, jotka todella kattavasti tyydyttävät metsänomistajien tarpeita ja pystyvät tarjoamaan sellaisia hyötyjä, joista ollaan valmiita maksamaan. Tässä tutkimuksessa on tarkasteltu nykyisiä metsäpalvelumarkkinoita, sillä kokonaiskuvan luominen nykytilanteesta tarjoaa pohjan tulevien muutoksien ennakoimiselle. Tutkimusmenetelmänä on käytetty kvalitatiivista sisällönanalyysiä, ja tarkastelun kohteena on ollut palveluntarjoajien metsänomistajille suuntaama markkinointimateriaali – pääasiassa tarjoajien internetissä oleva materiaali. Markkinointimateriaalien tukena on käytetty palveluorganisaatioiden edustajien ja alan asiantuntijoiden teemahaastatteluita. Palveluita ja organisaatioita on tarkasteltu niiden asiakkaan kokemien hyötyjen pohjalta, joita markkinoinnissa palveluihin ja palveluntarjoajiin on pyritty liittämään. Teoreettisesti taustalla on käytetty mallia kuluttajan valintakriteereistä hankintapäätöstä tehtäessä. Tulosten perusteella on löydettävissä kysynnän kannalta kriittisiä palveluita, joiden ympärille palvelukokonaisuuksia on rakennettu. Metsänomistamisen odotetaan olevan kannattavaa, joten eräs palveluntarjonnan haasteista syntyy alan tarpeesta rahoittaa itsensä mielekkäällä aikajänteellä. Tämä luo tarpeen tuloja synnyttävien palveluiden yhdistämiseen kokonaisuuksiksi kustannuksia aiheuttavien, mutta muita hyötyjä tuottavien palveluiden kanssa. Tarjoajien kannalta tärkeää on kyetä luomaan asiakkaita hyödyttäviä palvelukokonaisuuksia muuttuville markkinoille.

CSR in forest industry – Case study of reporting and implementation of social responsibility in three international companies

Corporate Social Responsibility (CSR) has become increasingly important topic in forest industries, and other global companies, in recent years. Globalisation, faster information delivery and demand for sustainable development have set new challenges for global companies in their business operations. Also the importance of stakeholder relations, and pressure to become more transparent has increased in the forest industries. Three dimensions of corporate responsibility economic, environmental and social, are often included in the concept of CSR. Global companies mostly claim that these dimensions are equally important. This study analyses CSR in forest industry and has focus on reporting and implementation of social responsibility in three international companies. These case-companies are Stora Enso, SCA and Sappi, and they have different geographical base, product portfolios and therefore present interesting differences about forest industry strategy and CSR. Global Reporting Initiative (GRI) has created the most known and used reporting framework in CSR reporting. GRI Guidelines have made CSR reporting a uniform function, which can also be measured between companies and different sectors. GRI Guidelines have also made it possible to record and control CSR data in the companies. In recent years the use of GRI Guidelines has increased substantially. Typically CSR reporting on economic and environmental responsibility have been systematic in the global companies and often driven by legistlation and other regulations. However the social responsibility has been less regulated and more difficult to compare. Therefore it has previously been often less focused in the CSR reporting of the global companies. The implementation and use of GRI Guidelines have also increased dialogue on social responsibility issues and stakeholder management in global companies. This study analyses the use of GRI´s framework in the forest industry companies´ CSR reporting. This is a qualitative study and the disclosure of data is empricially analysed using content analysis. Content analysis has been selected as a method for this study because it makes it possible to use different sources of information. The data of this study consists of existing academic literature of CSR, sustainability reports of thecase-companies during 2005-2009, and the semi-structured interviews with company representatives. Different sources provide the possibility to look at specific subject from more than one viewpoint. The results of the study show that all case-companies have relatively common themes in their CSR disclosure, and the differences rise mainly from their product-portfolios, and geographic base. Social impacts to local communities, in the CSR of the companies, were mainly dominated by issues concerning creating wealth to the society and impacting communities through creation of work. The comparability of the CSR reporting, and especially social indicators increased significally from 2007 onwards in all case-companies. Even though the companies claim that three dimensions of CSR economic, environmental and social are equally important economic issues and profit improvement still seem to drive most of the operations in the global companies. Many issues that are covered by laws and regulations are still essentially presented as social responsibility in CSR. However often the unwelcome issues in companies like closing operations are covered just briefly, and without adequate explanation. To make social responsibility equally important in the CSR it would demand more emphasis from all the case-companies. A lot of emphasis should be put especially on the detail and extensiveness of the social reponsibility content in the CSR.

Understorey vegetation as an indicator of forest site potential in Southern Finland.

The relationship between site characteristics and understorey vegetation composition was analysed with quantitative methods, especially from the viewpoint of site quality estimation. Theoretical models were applied to an empirical data set collected from the upland forests of southern Finland comprising 104 sites dominated by Scots pine (Pinus sylvestris L.), and 165 sites dominated by Norway spruce (Picea abies (L.) Karsten). Site index H100 was used as an independent measure of site quality. A new model for the estimation of site quality at sites with a known understorey vegetation composition was introduced. It is based on the application of Bayes' theorem to the density function of site quality within the study area combined with the species-specific presence-absence response curves. The resulting posterior probability density function may be used for calculating an estimate for the site variable. Using this method, a jackknife estimate of site index H100 was calculated separately for pine- and spruce-dominated sites. The results indicated that the cross-validation root mean squared error (RMSEcv) of the estimates improved from 2.98 m down to 2.34 m relative to the "null" model (standard deviation of the sample distribution) in pine-dominated forests. In spruce-dominated forests RMSEcv decreased from 3.94 m down to 3.16 m. In order to assess these results, four other estimation methods based on understorey vegetation composition were applied to the same data set. The results showed that none of the methods was clearly superior to the others. In pine-dominated forests, RMSEcv varied between 2.34 and 2.47 m, and the corresponding range for spruce-dominated forests was from 3.13 to 3.57 m.

Non-industrial private forest landowners’ choices of timber management strategies and potential allowable cut.

In the study, the potential allowable cut in the district of Pohjois-Savo - based on the non-industrial private forest landowners' (NIPF) choices of timber management strategies - was clarified. Alternative timber management strategies were generated, and the choices and factors affecting the choices of timber management strategies by NIPF landowners were studied. The choices of timber management strategies were solved by maximizing the utility functions of the NIPF landowners. The parameters of the utility functions were estimated using the Analytic Hierarchy Process (AHP). The level of the potential allowable cut was compared to the cutting budgets based on the 7th and 8th National Forest Inventories (NFI7 and NFI8), to the combining of private forestry plans, and to the realized drain from non-industrial private forests. The potential allowable cut was calculated using the same MELA system as has been used in the calculation of the national cutting budget. The data consisted of the NIPF holdings (from the TASO planning system) that had been inventoried compartmentwise and had forestry plans made during the years 1984-1992. The NIPF landowners' choices of timber management strategies were clarified by a two-phase mail inquiry. The most preferred strategy obtained was "sustainability" (chosen by 62 % of landowners). The second in order of preference was "finance" (17 %) and the third was "saving" (11 %). "No cuttings", and "maximum cuttings" were the least preferred (9 % and 1 %, resp.). The factors promoting the choices of strategies with intensive cuttings were a) "farmer as forest owner" and "owning fields", b) "increase in the size of the forest holding", c) agriculture and forestry orientation in production, d) "decreasing short term stumpage earning expectations", e) "increasing intensity of future cuttings", and f) "choice of forest taxation system based on site productivity". The potential allowable cut defined in the study was 20 % higher than the average of the realized drain during the years 1988-1993, which in turn, was at the same level as the cutting budget based on the combining of forestry plans in eastern Finland. Respectively, the potential allowable cut defined in the study was 12 % lower than the NFI8-based greatest sustained allowable cut for the 1990s. Using the method presented in this study, timber management strategies can be clarified for non-industrial private forest landowners in different parts of Finland. Based on the choices of timber managemet strategies, regular cutting budgets can be calculated more realistically than before.

Wood and fiber properties of Norway spruce and its suitability for thermomechanical pulping.

In the first part of the study, the selected wood and fiber properties were investigated in terms of their occurrence and variation in wood, as well as their relevance from the perspective of thermomechanical pulping process and related end-products. It was concluded that the most important factors were the fiber dimensions, juvenile wood content, and in some cases, the content of heartwood being associated with extremely dry wood with low permeability in spruce. With respect to the above properties, the following three pulpwood assortments of which pulping potential was assumed to vary were formed: wood from regeneration cuttings, first-thinnings wood, and sawmill chips. In the experimental part of the study the average wood and fiber characteristics and their variation were determined for each raw material group prior to pulping. Subsequently, each assortment - equaling about 1500 m3 roundwood - was pulped separately for a 24 h period, at constant process conditions. The properties of obtained newsgrade thermomechanical pulps were then determined. Thermomechanical pulping (TMP) from sawmill chips had the highest proportion of long fibers, smallest proportion of fines, and had generally the coarsest and longest fibers. TMP from first-thinnings wood was just the opposite, whereas that from regeneration cuttings fell in between the above two extremes. High proportion of dry heartwood in wood originating from regeneration cuttings produced a slightly elevated shives content. However, no differences were found in pulp specific energy consumption. The obtained pulp tear index was clearly best in TMP made from sawmill chips and poorest in pulp from first-thinnings wood, which had generally inferior strength properties. No dramatical differences in any of the strength properties were found between pulp from sawmill residual wood and regeneration cuttings. Pulp optical properties were superior in TMP from first-thinnings. Unexpectedly, no noticeable differences, which could be explained with fiber morphology, were found in sheet density, bulk, air permeance or roughness between the three pulps. The most important wood quality factors in this study were the fiber length, fiber cross-sectional dimensions and percentage juvenile wood. Differences found in the quality of TMP manufactured from the above spruce assortments suggest that they could be segregated and pulped separately to obtain specific product characteristics, i.e., for instance tailor-made end-products, and to minimize unnecessary variation in the raw material quality, and hence, pulp quality.

Non-industrial private forest landowners’ choices of timber management strategies.

The factors affecting the non-industrial, private forest landowners' (hereafter referred to using the acronym NIPF) strategic decisions in management planning are studied. A genetic algorithm is used to induce a set of rules predicting potential cut of the landowners' choices of preferred timber management strategies. The rules are based on variables describing the characteristics of the landowners and their forest holdings. The predictive ability of a genetic algorithm is compared to linear regression analysis using identical data sets. The data are cross-validated seven times applying both genetic algorithm and regression analyses in order to examine the data-sensitivity and robustness of the generated models. The optimal rule set derived from genetic algorithm analyses included the following variables: mean initial volume, landowner's positive price expectations for the next eight years, landowner being classified as farmer, and preference for the recreational use of forest property. When tested with previously unseen test data, the optimal rule set resulted in a relative root mean square error of 0.40. In the regression analyses, the optimal regression equation consisted of the following variables: mean initial volume, proportion of forestry income, intention to cut extensively in future, and positive price expectations for the next two years. The R2 of the optimal regression equation was 0.34 and the relative root mean square error obtained from the test data was 0.38. In both models, mean initial volume and positive stumpage price expectations were entered as significant predictors of potential cut of preferred timber management strategy. When tested with the complete data set of 201 observations, both the optimal rule set and the optimal regression model achieved the same level of accuracy.

A participatory approach to tactical forest planning.

The paper examines the needs, premises and criteria for effective public participation in tactical forest planning. A method for participatory forest planning utilizing the techniques of preference analysis, professional expertise and heuristic optimization is introduced. The techniques do not cover the whole process of participatory planning, but are applied as a tool constituting the numerical core for decision support. The complexity of multi-resource management is addressed by hierarchical decision analysis which assesses the public values, preferences and decision criteria toward the planning situation. An optimal management plan is sought using heuristic optimization. The plan can further be improved through mutual negotiations, if necessary. The use of the approach is demonstrated with an illustrative example, it's merits and challenges for participatory forest planning and decision making are discussed and a model for applying it in general forest planning context is depicted. By using the approach, valuable information can be obtained about public preferences and the effects of taking them into consideration on the choice of the combination of standwise treatment proposals for a forest area. Participatory forest planning calculations, carried out by the approach presented in the paper, can be utilized in conflict management and in developing compromises between competing interests.

Factors affecting partitioning of private forest holdings in Finland.

Questions of the small size of non-industrial private forest (NIPF) holdings in Finland are considered and factors affecting their partitioning are analyzed. This work arises out of Finnish forest policy statements in which the small average size of holdings has been seen to have a negative influence on the economics of forestry. A survey of the literature indicates that the size of holdings is an important factor determining the costs of logging and silvicultural operations, while its influence on the timber supply is slight. The empirical data are based on a sample of 314 holdings collected by interviewing forest owners in the years 1980-86. In 1990-91 the same holdings were resurveyed by means of a postal inquiry and partly by interviewing forest owners. The principal objective in compiling the data is to assist in quantifying ownership factors that influence partitioning among different kinds of NIPF holdings. Thus the mechanism of partitioning were described and a maximum likelihood logistic regression model was constructed using seven independent holding and ownership variables. One out of four holdings had undergone partitioning in conjunction with a change in ownership, one fifth among family owned holdings and nearly a half among jointly owned holdings. The results of the logistic regression model indicate, for instance, that the odds on partitioning is about three times greater for jointly owned holdings than for family owned ones. Also, the probabilities of partitioning were estimated and the impact of independent dichotomous variables on the probability of partitioning ranged between 0.02 and 0.10. The low value of the Hosmer-Lemeshow test statistic indicates a good fit of the model and the rate of correct classification was estimated to be 88 per cent with a cutoff point of 0.5. The average size of holdings undergoing ownership changes decreased from 29.9 ha to 28.7 ha over the approximate interval 1983-90. In addition, the transition probability matrix showed that the trends towards smaller size categories mostly involved in the small size categories, less than 20 ha. The results of the study can be used in considering the effects of the small size of holdings for forestry and if the purpose is to influence partitioning through forest or rural policy.

Management of bushland vegetation using rainwater harvesting in eastern Kenya.

Microcatchment water harvesting (MCWH) improved the survival and growth of planted trees on heavy soils in eastern Kenya five to six years after planting. In the best method, the cross-tied furrow microcatchments, the mean annual increments (MAI; based on the average biomass of living trees multiplied by tree density and survival) of the total and usable biomass in Prosopis juliflora were 2787 and 1610 kg ha-1 a-1 respectively, when the initial tree density was 500 to 1667 trees per hectare. Based on survival, the indigenous Acacia horrida, A. mellifera and A. zanzibarica were the most suitable species for planting using MCWH. When both survival and yield were considered, a local seed source of the introduced P. juliflora was superior to all other species. The MAI in MCWH was at best distinctly higher than that in the natural vegetation (163­307 and 66­111 kg ha-1 a-1 for total and usable biomass respectively); this cannot satisfy the fuelwood demand of concentrated populations, such as towns or irrigation schemes. The density of seeds of woody species in the topsoil was 40.1 seeds m-2 in the Acacia-Commiphora bushland and 12.6 seeds m-2 in the zone between the bushland and the Tana riverine forest. Rehabilitation of woody vegetation using the soil seed bank alone proved difficult due to the lack of seeds of desirable species. The regeneration and dynamics of woody vegetation were also studied both in cleared and undisturbed bushland. A sub-type of Acacia-Commiphora bushland was identified as Acacia reficiens bushland, in which the dominant Commiphora species is C. campestris. Most of the woody species did not have even-aged populations but cohort structures that were skewed towards young individuals. The woody vegetation and the status of soil nutrients were estimated to recover in 15­20 years on Vertic Natrargid soils after total removal of above-ground vegetation.

Late-industrial sawmill customers.

The methods of secondary wood processing are assumed to evolve over time and to affect the requirements set for the wood material and its suppliers. The study aimed at analysing the industrial operating modes applied by joinery and furniture manufacturers as sawnwood users. Industrial operating mode was defined as a pattern of important decisions and actions taken by a company which describes the company's level of adjustment in the late-industrial transition. A non-probabilistic sample of 127 companies was interviewed, including companies from Denmark, Germany, the Netherlands, and Finland. Fifty-two of the firms were furniture manufacturers and the other 75 were producing windows and doors. Variables related to business philosophy, production operations, and supplier choice criteria were measured and used as a basis for a customer typology; variables related to wood usage and perceived sawmill performance were measured to be used to profile the customer types. Factor analysis was used to determine the latent dimensions of industrial operating mode. Canonical correlations analysis was applied in developing the final base for classifying the observations. Non-hierarchical cluster analysis was employed to build a five-group typology of secondary wood processing firms; these ranged from traditional mass producers to late-industrial flexible manufacturers. There is a clear connection between the amount of late-industrial elements in a company and the share of special and customised sawnwood it uses. Those joinery or furniture manufacturers that are more late-industrial also are likely to use more component-type wood material and to appreciate customer-oriented technical precision. The results show that the change is towards the use of late-industrial sawnwood materials and late-industrial supplier relationships.