Mitochondrial helicase Twinkle in mtDNA copy number regulation and a late-onset disease model

Mitochondrial diseases are caused by disturbances of the energy metabolism. The disorders range from severe childhood neurological diseases to muscle diseases of adults. Recently, mitochondrial dysfunction has also been found in Parkinson s disease, diabetes, certain types of cancer and premature aging. Mitochondria are the power plants of the cell but they also participate in the regulation of cell growth, signaling and cell death. Mitochondria have their own genetic material, mtDNA, which contains the genetic instructions for cellular respiration. Single cell may host thousands of mitochondria and several mtDNA molecules may reside inside single mitochondrion. All proteins needed for mtDNA maintenance are, however, encoded by the nuclear genome, and therefore, mutations of the corresponding genes can also cause mitochondrial disease. We have here studied the function of mitochondrial helicase Twinkle. Our research group has previously identified nuclear Twinkle gene mutations underlying an inherited adult-onset disorder, progressive external ophthalmoplegia (PEO). Characteristic for the PEO disease is the accumulation of multiple mtDNA deletions in tissues such as the muscle and brain. In this study, we have shown that Twinkle helicase is essential for mtDNA maintenance and that it is capable of regulating mtDNA copy number. Our results support the role of Twinkle as the mtDNA replication helicase. No cure is available for mitochondrial disease. Good disease models are needed for studies of the cause of disease and its progression and for treatment trials. Such disease model, which replicates the key features of the PEO disease, has been generated in this study. The model allows for careful inspection of how Twinkle mutations lead to mtDNA deletions and further causes the PEO disease. This model will be utilized in a range of studies addressing the delay of the disease onset and progression and in subsequent treatment trials. In conclusion, in this thesis fundamental knowledge of the function of the mitochondrial helicase Twinkle was gained. In addition, the first model for adult-onset mitochondrial disease was generated.

Thrombin regulation in newborn infants

The coagulation system of newborn infants differs markedly from that of older children and adults. The activities of most coagulation factors and anticoagulants are low, leading to altered regulation in the formation of the key enzyme, thrombin. Timely and adequate generation of thrombin is essential, as thrombin activates platelets and many coagulation factors, cleaves fibrinogen into fibrin and activates the antithrombotic and anti-inflammatory protein C pathway. On the other hand, excess thrombin may promote thrombotic complications and exacerbate harmful inflammatory reactions. Despite the characteristic features, the newborn coagulation system can be considered physiological, since healthy newborns rarely show haemorrhagic or thrombotic complications. Sick newborns, however, often encounter clinical situations that challenge their coagulation system. The aim of this study was to clarify the behaviour of the neonatal coagulation system in selected clinical situations, with a special emphasis on the generation of thrombin. Thrombin was measured by in vivo thrombin generation markers and by thrombin generation potential in vitro. The patient groups included sick newborns undergoing intensive care and receiving fresh-frozen plasma (FFP), requiring exchange transfusions (ET) or presenting with a congenital heart defect requiring open heart surgery. Additionally, healthy newborns with inherited heterozygous factor V Leiden (FVL) mutation were studied. Thrombin generation potential was also analysed in cord plasma of healthy infants and in adults. Healthy as well as sick newborn infants showed lower total thrombin generation potential in vitro but faster initiation of thrombin generation than adults. These findings were qualitatively similar when plasma was supplemented with platelets. Platelets, however, significantly altered the effect of the major anticoagulant, activated protein C (APC), on thrombin generation potential. In accordance with previous studies, thrombin generation in healthy newborn platelet-poor plasma was resistant to the anticoagulant effects of APC, but when the plasma was supplemented with platelets APC attenuated thrombin generation significantly more in newborns than in adults. In vivo generation of thrombin was elevated in nearly all of the sick newborn infants. The low-volume FFP transfusion as opposed to the change from neonatal to adult blood in ET exerted markedly different effects on neonatal thrombin generation. FFP reduced the in vivo generation of thrombin in those newborns with the highest pretransfusional thrombin generation, thus acting as an anticoagulant agent. In those infants with lower pretransfusional thrombin generation, the effect of FFP on thrombin generation was fairly neutral. On the other hand, the combination of red blood cells and FFP, used to perform ET, significantly increased the in vivo thrombin formation and shifted the balance in the newborn coagulation system to the procoagulant direction. Cardiopulmonary bypass (CPB) also significantly increased the in vivo thrombin generation, but the thrombin generation profile during CPB differed from that previously observed in adults. Escalation of thrombin at early reperfusion was not observed in newborns; in adults, its occurrence is associated with postoperative myocardial damage. Finally, in healthy newborns with FVL heterozygosity, faster initiation of thrombin generation was observed compared with controls. Interestingly, FV level was lower in FVL-heterozygous infants, possibly to counteract the procoagulant effects induced by FVL. In conclusion, unique features regarding thrombin regulation in newborn infants were observed. These features included a novel platelet effect on the regulation of the protein C pathway. The clinical challenges mainly seemed to shift the balance in the coagulation system of newborns to the procoagulant direction. Blood component transfusions markedly affected coagulation in a manner specific to the product but that could also be altered by the clinical situation. Overall, the results highlight the need for understanding developmental haemostasis for both diagnostic and therapeutic purposes.

Search for a Light Higgs Boson in Central Exclusive Diffraction: Method and Detectors

By detecting leading protons produced in the Central Exclusive Diffractive process, p+p → p+X+p, one can measure the missing mass, and scan for possible new particle states such as the Higgs boson. This process augments - in a model independent way - the standard methods for new particle searches at the Large Hadron Collider (LHC) and will allow detailed analyses of the produced central system, such as the spin-parity properties of the Higgs boson. The exclusive central diffractive process makes possible precision studies of gluons at the LHC and complements the physics scenarios foreseen at the next e+e− linear collider. This thesis first presents the conclusions of the first systematic analysis of the expected precision measurement of the leading proton momentum and the accuracy of the reconstructed missing mass. In this initial analysis, the scattered protons are tracked along the LHC beam line and the uncertainties expected in beam transport and detection of the scattered leading protons are accounted for. The main focus of the thesis is in developing the necessary radiation hard precision detector technology for coping with the extremely demanding experimental environment of the LHC. This will be achieved by using a 3D silicon detector design, which in addition to the radiation hardness of up to 5×10^15 neutrons/cm2, offers properties such as a high signal-to- noise ratio, fast signal response to radiation and sensitivity close to the very edge of the detector. This work reports on the development of a novel semi-3D detector design that simplifies the 3D fabrication process, but conserves the necessary properties of the 3D detector design required in the LHC and in other imaging applications.

Characterizing Physical Properties of Wetting Paper by Air Coupled Ultrasound and Light

This thesis reports investigations into the paper wetting process and its effects on the surface roughness and the out-of-plane (ZD) stiffness of machine-made paper. The aim of this work was to test the feasibility of employing air-borne ultrasound methods to determine surface roughness (by reflection) and ZD stiffness (by through transmission) of paper during penetration of distilled water, isopropanol and their mixtures. Air-borne ultrasound provides a non-contacting way to evaluate sample structure and mechanics during the liquid penetration event. Contrary to liquid immersion techniques, an air-borne measurement allows studying partial wetting of paper. In addition, two optical methods were developed to reveal the liquid location in paper during wetting. The laser light through transmission method was developed to monitor the liquid location in partially wetted paper. The white light reflection method was primarily used to monitor the penetration of the liquid front in the thickness direction. In the latter experiment the paper was fully wetted. The main results of the thesis were: 1) Liquid penetration induced surface roughening was quantified by monitoring the ultrasound reflection from the paper surface. 2) Liquid penetration induced stiffness alteration in the ZD of paper could be followed by measuring the change in the ultrasound ZD resonance in paper. 3) Through transmitted light revealed the liquid location in the partially wetted paper. 4) Liquid movement in the ZD of the paper could be observed by light reflection. The results imply that the presented ultrasonic means can without contact measure the alteration of paper roughness and stiffness during liquid transport. These methods can help avoiding over engineering the paper which reduces raw material and energy consumption in paper manufacturing. The presented optical means can estimate paper specific wetting properties, such as liquid penetration speed, transport mechanisms and liquid location within the paper structure. In process monitoring, these methods allow process tuning and manufacturing of paper with engineered liquid transport characteristics. With such knowledge the paper behaviour during printing can be predicted. These findings provide new methods for paper printing, surface sizing, and paper coating research.

Primordial Isocurvature Perturbation in Light of CMB and LSS Data

The increased accuracy in the cosmological observations, especially in the measurements of the comic microwave background, allow us to study the primordial perturbations in grater detail. In this thesis, we allow the possibility for a correlated isocurvature perturbations alongside the usual adiabatic perturbations. Thus far the simplest six parameter \Lambda CDM model has been able to accommodate all the observational data rather well. However, we find that the 3-year WMAP data and the 2006 Boomerang data favour a nonzero nonadiabatic contribution to the CMB angular power sprctrum. This is primordial isocurvature perturbation that is positively correlated with the primordial curvature perturbation. Compared with the adiabatic \Lambda CMD model we have four additional parameters describing the increased complexity if the primordial perturbations. Our best-fit model has a 4% nonadiabatic contribution to the CMB temperature variance and the fit is improved by \Delta\chi^2 = 9.7. We can attribute this preference for isocurvature to a feature in the peak structure of the angular power spectrum, namely, the widths of the second and third acoustic peak. Along the way, we have improved our analysis methods by identifying some issues with the parametrisation of the primordial perturbation spectra and suggesting ways to handle these. Due to the improvements, the convergence of our Markov chains is improved. The change of parametrisation has an effect on the MCMC analysis because of the change in priors. We have checked our results against this and find only marginal differences between our parametrisation.

Heavy-light mesons on a lattice

Several excited states of Ds and Bs mesons have been discovered in the last six years: BaBar, Cleo and Belle discovered the very narrow states D(s0)*(2317)+- and D(s1)(2460)+- in 2003, and CDF and DO Collaborations reported the observation of two narrow Bs resonances, B(s1)(5830)0 and B*(s2)(5840)0 in 2007. To keep up with experiment, meson excited states should be studied from the theoretical aspect as well. The theory that describes the interaction between quarks and gluons is quantum chromodynamics (QCD). In this thesis the properties of the meson states are studied using the discretized version of the theory - lattice QCD. This allows us to perform QCD calculations from first principles, and "measure" not just energies but also the radial distributions of the states on the lattice. This gives valuable theoretical information on the excited states, as we can extract the energy spectrum of a static-light meson up to D wave states (states with orbital angular momentum L=2). We are thus able to predict where some of the excited meson states should lie. We also pay special attention to the order of the states, to detect possible inverted spin multiplets in the meson spectrum, as predicted by H. Schnitzer in 1978. This inversion is connected to the confining potential of the strong interaction. The lattice simulations can also help us understand the strong interaction better, as the lattice data can be treated as "experimental" data and used in testing potential models. In this thesis an attempt is made to explain the energies and radial distributions in terms of a potential model based on a one-body Dirac equation. The aim is to get more information about the nature of the confining potential, as well as to test how well the one-gluon exchange potential explains the short range part of the interaction.