Regulation of strawberry growth and development

Strawberries (Fragaria sp.) are adapted to diverse environmental conditions from the tropics to about 70ºN, so different responses to environmental conditions can be found. Most genotypes of garden strawberry (F. x ananassa Duch.) and woodland strawberry (F. vesca L.) are short-day (SD) plants that are induced to flowering by photoperiods under a critical limit, but also various photoperiod x temperature interactions can be found. In addition, continuously flowering everbearing (EB) genotypes are found. In addition to flowering, axillary bud differentiation in strawberry is regulated by photoperiod. In SD conditions, axillary buds differentiate to rosette-like structures called "branch crowns", whereas in long-day conditions (LD) they form runners, branches with 2 long internodes followed by a daughter plant (leaf rosette). The number of crown branches determines the yield of the plant, since inflorescences are formed from the apical meristems of the crown. Although axillary bud differentiation is an important developmental process in strawberries, its environmental and hormonal regulation has not been characterized in detail. Moreover, the genetic mechanisms underlying axillary bud differentiation and regulation of flowering time in these species are almost completely unresolved. These topics have been studied in this thesis in order to enhance strawberry research, cultivation and breeding. The results showed that 8-12 SD cycles suppressed runner initiation from the axillary buds of the garden strawberry cv. Korona with the concomitant induction of crown branching, and 3 weeks of SD was sufficient for the induction of flowering in the main crown. Furthermore, a second SD treatment given a few weeks after the first SD period can be used to induce flowering in the primary branch crowns and to induce the formation of secondary branches. Thus, artificial SD treatments effectively stimulate crown branching, providing one means for the increase of cropping (yield) potential in strawberry. It was also shown by growth regulation applications, quantitave hormone analysis and gene expression analysis that gibberellin (GA) is one of the key signals involved in the photoperiod control of shoot differentiation. The results indicate that photoperiod controls GA activity specifically in axillary buds, thereby determining bud fate. It was further shown that chemical control of GA biosynthesis by prohexadione-calcium can be utilized to prevent excessive runner formation and induce crown branching in strawberry fields. Moreover, ProCa increased berry yield up to 50%, showing that it is an easier and more applicable alternative to artificial SD treatments for controlling strawberry crown development and yield. Finally, flowering gene pathways in Fragaria were explored by searching for homologs of 118 Arabidopsis thaliana flowering-time genes. In total, 66 gene homologs were identified, and they distributed to all known flowering pathways, suggesting the presence of these pathways also in strawberry. Expression analysis of selected genes revealed that the mRNA of putative floral identity gene APETALA1 accumulated in the shoot apex of the EB genotype after the induction of flowering, whereas it was absent in vegetative SD genotype, indicating the usefulness of this gene product as the marker of floral initiation. The present data enables the further exploration of strawberry flowering pathways with genetic transformation, gene mapping and transcriptomics methods.

Ode to a Skylark: Agricultural intensification and farmland birds in the Baltic region

Intensification of agricultural land-use has been was shown to be the key reason behind declines in wildlife species associated with farmland. Accession to the European Union is regarded as a potential threat to the farmland biota of its new member states. In my thesis I looked at scenarios of agricultural development across the Baltic states of Estonia, Latvia and Lithuania, and the ways they are seen to affect farmed environments as a habitat of farmland bird species. I looked at the effects of major farmed habitats across the region, and assessed the role of spatial organisation of farmed habitats. I also evaluated the direction and magnitude of changes in bird communities following progression of farmland land-use from a relatively less intensive to the most intensive type within each country. Different aspects of the structural complexity of farmland were critical for supporting farmland birds. There was a clear indication that the more intensively farmed areas across the region provided habitat for fewer bird species and individuals, and intensification of field management was reflected in a tangible decrease in farmland bird abundance. The second part of the thesis, based on interviews in Estonia and Finland, is devoted to farmers interest in and knowledge of farmland wildlife, their understanding of the concept of biodiversity, and awareness of causes behind species declines. I examined the relationship between farmers interest and their willingness to undertake practices favouring farmland wildlife. Many farmers viewed biodiversity from a narrow perspective. In Finland farmers expressed higher concern about the decline in common farmland species than in Estonia. In both countries farmers rated intensification of agriculture as the major driving force behind declines. The expressed interest in wildlife positively correlated with willingness to undertake wildlife-friendly measures. Only farmers with agri-environment contracts targeted specifically at biodiversity were more knowledgeable about practical on-farm activities favouring wildlife, and were more willing to employ them that the rest. The results suggest that, by contributing to simplification of the farmland structure, homogenisation of crops, and increase in intensity of field use, EU agricultural policies will have a detrimental effect on farmland bird populations in Eastern Europe. Farmers are on the whole positive to the idea of supporting wildlife on their farms, and are concerned about declines, but they require payments to offset their income loss and extra work. I propose ways of further improving and better targeting of the agri-environment schemes in the region. I argue that with a foreseen tripling of cereal yields across the region, the EU Council s target of halting biodiversity decline in the EU by 2010 may not be realistic unless considerable improvements are made in conservation safeguards within the EU agricultural policy for the region.

Microbial quality of hemp (Cannabis sativa L.) and flax (Linum usitatissimum L.) from plants to thermal insulation

Flax and hemp have traditionally been used mainly for textiles, but recently interest has also been focused on non-textile applications. Microbial quality throughout the whole processing chain of bast fibres has not previously been studied. This study concentrates on the microbial quality and possible microbial risks in the production chain of hemp and flax fibres and fibrous thermal insulations. In order to be able to utilize hemp and flax fibres, the bast fibres must be separated from the rest of the plant. Non-cellulosic components can be removed with various pretreatment processes, which are associated with a certain risk of microbial contamination. In this study enzymatic retting and steam explosion (STEX) were examined as pretreatment processes. On the basis of the results obtained in this study, the microbial contents on stalks of both plants studied increased at the end of the growing season and during the winter. However, by processing and mechanical separation it is possible to produce fibres containing less moulds and bacteria than the whole stem. Enzymatic treatment encouraged the growth of moulds in fibres. Steam explosion reduced the amount of moulds in fibres. Dry thermal treatment used in this study did not markedly reduce the amount of microbes. In this project an emission measurement chamber was developed which was suitable for measurements of emissions from both mat type and loose fill type insulations, and capable of interdisciplinary sampling. In this study, the highest amounts of fungal emissions were in the range of 10^3 10^5 cfu/m^3 from the flax and hemp insulations at 90% RH of air. The fungal emissions from stone wool, glass wool and recycled paper insulations were below 10^2 cfu/m^3 even at 90% RH. Equally low values were obtained from bast fibrous materials in lower humidities (at 30% and 80% RH of air). After drying of moulded insulations at 30% RH, the amounts of emitted moulds were in all cases higher compared to the emissions at 90% RH before drying. The most common fungi in bast fibres were Penicillium and Rhizopus. The widest variety of different fungi was in the untreated hemp and linseed fibres and in the commercial loose-fill flax insulation. Penicillium, Rhizopus and Paecilomyces were the most tolerant to steam explosion. According to the literature, the most common fungi in building materials and indoor air are Penicillium, Aspergillus and Cladosporium, which were all found in some of the bast fibre materials in this study. As organic materials, hemp and flax fibres contain high levels of nutrients for microbial growth. The amount of microbes can be controlled and somewhat decreased by the processing methods presented.

Rearing strategies of young dairy calves in relation to production, behaviour and welfare

Vasikoiden kasvatus yksilökarsinoissa, imemismahdollisuuden puute maitojuoton yhteydessä sekä pienet juomamäärät ovat tekijöitä, jotka mahdollisesti voivat vähentää vasikoiden hyvinvointia. Vasikoiden kasvatukseen etsitäänkin uusia tapoja, joissa eläinten käyttäytymistarpeet ja hyvinvointi otetaan entistä paremmin huomioon. Tässä väitöskirjassa vasikoiden kasvatusta on tarkasteltu sekä tuotannon että vasikoiden käyttäytymisen ja hyvinvoinnin kannalta. Väitöskirja koostuu kolmesta kokeesta, joista ensimmäisessä tutkittiin vasikoiden kasvatusta ryhmäkarsinoissa ulkona tai sisällä ja vasikoiden kasvatusta sisällä ryhmä- tai yksilökarsinoissa. Toisessa kokeessa vasikoiden annettiin imeä emiään rajoitetusti lypsyn jälkeen viiden tai kahdeksan viikon ajan ja kolmannessa selvitettiin vasikoiden veden juontia, kun vasikat saivat juomarehua vapaasti. Lisäksi kokeiden yhdistetystä aineistosta analysoitiin eri rehujen syöntimäärien suhdetta sekä rehujen vaikutusta kasvuun ennen ja jälkeen maidosta vieroituksen. Tutkimuksessa todettiin, että vasikoita voi ryhmässä kasvattaa kylmissä ja vaihtelevissa sääoloissa ulkona, kunhan ne hoidetaan ja ruokitaan erittäin huolellisesti. Kylmällä ilmalla vasikat saattavat kuitenkin syödä väkirehua vähemmän varsinkin, jos ruokailupaikka on ulkona ja makuualue sisällä. Ryhmässä kasvaneet vasikat aloittivat sekä kuivien rehujen syönnin että märehtimisen nuorempina kuin yksilökarsinassa kasvaneet. Ryhmissä esiintyvää käyttäytymisongelmaa, toisten vasikoiden imemistä, voidaan vähentää hoito- ja ruokintamenetelmillä. Annettaessa vasikoiden imeä emiään rajoitetusti lypsyn jälkeen vasikat oppivat imemään emiään hyvin nopeasti. Lypsytyö vaikeutui muutamien lehmien kohdalla, sillä ne pidättivät maitoa lypsettäessä. Saadessaan imeä rajoitetusti vasikat imivät suurehkoja maitomääriä kerrallaan. Vieroittaminen suurilta maitomääriltä viiden viikon iässä oli kuitenkin liian aikaista, koska vasikat eivät vielä syöneet riittävästi kuivia rehuja. Vieroitus emästä niin viiden kuin kahdeksankin viikon iässä aiheutti vasikoissa levottomuutta ja ääntelyn lisääntymistä. Saadessaan hapatettua juomarehua vapaasti vasikat joivat keskimäärin vain vähän vettä, olipa vesilähteenä avoin ämpäri tai vesinippa. Vasikoiden välillä oli suurta vaihtelua veden juontimäärissä. Viikkoa ennen maidosta vieroitusta vasikat joivat 0-3 l vettä päivässä. Vasikat joivat nipasta kerrallaan vähemmän vettä kuin ämpäristä, ja käyttivät enemmän aikaa päivässä veden juomiseen kuin vesiämpäristä juoneet vasikat. Suurin osa vasikoista joi vettä juomanipoista erikoisella tavalla esimerkiksi painamalla nippaa otsalla ja juomalla tippuvaa vettä. Vesinipat voivat olla siis vasikoille joko vaikeita tai epämukavia käyttää. Vasikoiden juoman maitomäärän lisääntyessä kasvu lisääntyy selvästi. Runsas maidon juominen vähentää kuitenkin kuivien rehujen syöntiä ja vieroitusvaiheessa kasvu voi hidastua. Vasikat olisikin tärkeää vieroittaa vähitellen, ettei muutoksia kasvuun tulisi. Syönti- ja kasvutulokset eivät aina anna oikeaa kuvaa kasvatusmenetelmien eroista eläinten hyvinvoinnin kannalta. Käyttäytyminen on herkkä hyvinvoinnin mittari ja se tulisikin aina huomioida eri kasvatusmenetelmiä arvioitaessa. .

Understanding the organic chain : The framework of the interaction between the actors in organic chains in relation to ecological modernisation of food production

The sustainability of food production has increasingly attracted the attention of consumers, farmers, food and retailing companies, and politicians. One manifestation of such attention is the growing interest in organic foods. Organic agriculture has the potential to enhance the ecological modernisation of food production by implementing the organic method as a preventative innovation that simultaneously produces environmental and economic benefits. However, in addition to the challenges to organic farming, the small market share of organic products in many countries today and Finland in particular risks undermining the achievement of such benefits. The problems identified as hindrances to the increased consumption of organic food are the poor availability, limited variety and high prices of organic products, the complicated buying decisions and the difficulties in delivering the intangible value of organic foods. Small volumes and sporadic markets, high costs, lack of market information, as well as poor supply reliability are obstacles to increasing the volume of organic production and processing. These problems shift the focus from a single actor to the entire supply chain and require solutions that involve more interaction among the actors within the organic chain. As an entity, the organic food chain has received very little scholarly attention. Researchers have mainly approached the organic chain from the perspective of a single actor, or they have described its structure rather than the interaction between the actors. Consequently, interaction among the primary actors in organic chains, i.e. farmers, manufacturers, retailers and consumers, has largely gone unexamined. The purpose of this study is to shed light on the interaction of the primary actors within a whole organic chain in relation to the ecological modernisation of food production. This information is organised into a conceptual framework to help illuminate this complex field. This thesis integrates the theories and concepts of three approaches: food system studies, supply chain management and ecological modernisation. Through a case study, a conceptual system framework will be developed and applied to a real life-situation. The thesis is supported by research published in four articles. All examine the same organic chains through case studies, but each approaches the problem from a different, complementary perspective. The findings indicated that regardless of the coherent values emphasising responsibility, the organic chains were loosely integrated to operate as a system. The focus was on product flow, leaving other aspects of value creation largely aside. Communication with consumers was rare, and none of the actors had taken a leading role in enhancing the market for organic products. Such a situation presents unsuitable conditions for ecological modernisation of food production through organic food and calls for contributions from stakeholders other than those directly involved in the product chain. The findings inspired a revision of the original conceptual framework. The revised framework, the three-layer framework , distinguishes the different layers of interaction. By gradually enlarging the chain orientation the different but interrelated layers become visible. A framework is thus provided for further research and for understanding practical implications of the performance of organic food chains. The revised framework provides both an ideal model for organic chains in relation to ecological modernisation and demonstrates a situation consistent with the empirical evidence.

Nitrogen dynamics and nitrogen use efficiency of spring cereals under Finnish growing conditions

Nitrogen (N) is one of the main inputs in cereal cultivation and as more than half of the arable land in Finland is used for cereal production, N has contributed substantially to agricultural pollution through fertilizer leaching and runoff. Based on this global phenomenon, the European Community has launched several directives to reduce agricultural emissions to the environment. Trough such measures, and by using economic incentives, it is expected that northern European agricultural practices will, in the future, include reduced N fertilizer application rates. Reduced use of N fertilizer is likely to decrease both production costs and pollution, but could also result in reduced yields and quality if crops experience temporary N deficiency. Therefore, more efficient N use in cereal production, to minimize pollution risks and maximize farmer income, represents a current challenge for agronomic research in the northern growing areas. The main objective of this study was to determine the differences in nitrogen use efficiency (NUE) among spring cereals grown in Finland. Additional aims were to characterize the multiple roles of NUE by analysing the extent of variation in NUE and its component traits among different cultivars, and to understand how other physiological traits, especially radiation use efficiency (RUE) and light interception, affect and interact with the main components of NUE and contribute to differences among cultivars. This study included cultivars of barley (Hordeum vulgare L.), oat (Avena sativa L.) and wheat (Triticum aestivum L.). Field experiments were conducted between 2001 and 2004 at Jokioinen, in Finland. To determine differences in NUE among cultivars and gauge the achievements of plant breeding in NUE, 17-18 cultivars of each of the three cereal species released between 1909 and 2002 were studied. Responses to nitrogen of landraces, old cultivars and modern cultivars of each cereal species were evaluated under two N regimes (0 and 90 kg N ha-1). Results of the study revealed that modern wheat, oat and barley cultivars had similar NUE values under Finnish growing conditions and only results from a wider range of cultivars indicated that wheat cultivars could have lower NUE than the other species. There was a clear relationship between nitrogen uptake efficiency (UPE) and NUE in all species whereas nitrogen utilization efficiency (UTE) had a strong positive relationship with NUE only for oat. UTE was clearly lower in wheat than in other species. Other traits related to N translocation indicated that wheat also had a lower harvest index, nitrogen harvest index and nitrogen remobilisation efficiency and therefore its N translocation efficiency was confirmed to be very low. On the basis of these results there appears to be potential and also a need for improvement in NUE. These results may help understand the underlying physiological differences in NUE and could help to identify alternative production options, such as the different roles that species can play in crop rotations designed to meet the demands of modern agricultural practices.

Physical characterization of plastic surfaces in wearing and cleanability research

Plastic surfaces are a group of materials used for many purposes. The present study was focused on methods for investigation of surface topography, wearing and cleanability of polyvinyl chloride (PVC) model surfaces and industrial plastic surfaces. Contact profilometry, scanning electron microscopy (SEM) and atomic force microscopy (AFM) are powerful methods for studying the topography of plastic surfaces. Although they have their own limitations, they are together an effective tool providing useful information on surface topography, especially when studying laboratory-made PVC model surfaces with known chemical compositions and structures. All examined laboratory-made PVC plastic surfaces examined in this work could be considered as smooth according to both AFM and profilometer measurements because height differences are in the nanoscale on every surface. Industrial plastic surfaces are a complex group of materials because of their chemical and topographical heterogeneity, but they are nevertheless important reference materials when developing cleaning and wearing methods. According to the results of this study the Soiling and Wearing Drum and the Frick-Taber methods are very useful when simulating three-body wearing of plastic surfaces. Both the investigated wearing methods can be used to compare the wearing of different plastic materials using appropriate evaluation methods of wearing and industrial use. In this study, physical methods were developed and adapted from other fields of material research to cleanability studies. The thesis focuses on the methodology for investigating the cleanability of plastic surfaces under realistic conditions, where surface topography and the effect of wear cleanability were among the major topics. A colorimetric method proved to be suitable for examining the cleanability of the industrial plastic surfaces. The results were utilized to evaluate the relationship between cleanability and the surface properties of plastic surfaces. The devices and methods used in the work can be utilized both in material research and product development.

Microclimate and gas emissions in dairy buildings : Instrumentation, theory and measurements

The aim of this thesis was to develop measurement techniques and systems for measuring air quality and to provide information about air quality conditions and the amount of gaseous emissions from semi-insulated and uninsulated dairy buildings in Finland and Estonia. Specialization and intensification in livestock farming, such as in dairy production, is usually accompanied by an increase in concentrated environmental emissions. In addition to high moisture, the presence of dust and corrosive gases, and widely varying gas concentrations in dairy buildings, Finland and Estonia experience winter temperatures reaching below -40 ºC and summer temperatures above +30 ºC. The adaptation of new technologies for long-term air quality monitoring and measurement remains relatively uncommon in dairy buildings because the construction and maintenance of accurate monitoring systems for long-term use are too expensive for the average dairy farmer to afford. Though the documentation of accurate air quality measurement systems intended mainly for research purposes have been made in the past, standardised methods and the documentation of affordable systems and simple methods for performing air quality and emissions measurements in dairy buildings are unavailable. In this study, we built three measurement systems: 1) a Stationary system with integrated affordable sensors for on-site measurements, 2) a Wireless system with affordable sensors for off-site measurements, and 3) a Mobile system consisting of expensive and accurate sensors for measuring air quality. In addition to assessing existing methods, we developed simplified methods for measuring ventilation and emission rates in dairy buildings. The three measurement systems were successfully used to measure air quality in uninsulated, semi-insulated, and fully-insulated dairy buildings between the years 2005 and 2007. When carefully calibrated, the affordable sensors in the systems gave reasonably accurate readings. The spatial air quality survey showed high variation in microclimate conditions in the dairy buildings measured. The average indoor air concentration for carbon dioxide was 950 ppm, for ammonia 5 ppm, for methane 48 ppm, for relative humidity 70%, and for inside air velocity 0.2 m/s. The average winter and summer indoor temperatures during the measurement period were -7º C and +24 ºC for the uninsulated, +3 ºC and +20 ºC for the semi-insulated and +10 ºC and +25 ºC for the fully-insulated dairy buildings. The measurement results showed that the uninsulated dairy buildings had lower indoor gas concentrations and emissions compared to fully insulated buildings. Although occasionally exceeded, the ventilation rates and average indoor air quality in the dairy buildings were largely within recommended limits. We assessed the traditional heat balance, moisture balance, carbon dioxide balance and direct airflow methods for estimating ventilation rates. The direct velocity measurement for the estimation of ventilation rate proved to be impractical for naturally ventilated buildings. Two methods were developed for estimating ventilation rates. The first method is applicable in buildings in which the ventilation can be stopped or completely closed. The second method is useful in naturally ventilated buildings with large openings and high ventilation rates where spatial gas concentrations are heterogeneously distributed. The two traditional methods (carbon dioxide and methane balances), and two newly developed methods (theoretical modelling using Fick s law and boundary layer theory, and the recirculation flux-chamber technique) were used to estimate ammonia emissions from the dairy buildings. Using the traditional carbon dioxide balance method, ammonia emissions per cow from the dairy buildings ranged from 7 g day-1 to 35 g day-1, and methane emissions per cow ranged from 96 g day-1 to 348 g day-1. The developed methods proved to be as equally accurate as the traditional methods. Variation between the mean emissions estimated with the traditional and the developed methods was less than 20%. The developed modelling procedure provided sound framework for examining the impact of production systems on ammonia emissions in dairy buildings.

Modifications of surface materials and their effects on cleanability as studied by radiochemical methods

Modifications of surface materials and their effects on cleanability have important impacts in many fields of activity. In this study the primary aim was to develop radiochemical methods suitable for evaluating cleanability in material research for different environments. Another aim was to investigate the effects of surface modifications on cleanabilitity and surface properties of plastics, ceramics, concrete materials and also their coatings in conditions simulating their typical environments. Several new 51Cr and 14C labelled soils were developed for testing situations. The new radiochemical methods developed were suitable for examining different surface materials and different soil types, providing quantitative information about the amount of soil on surfaces. They also take into account soil soaked into surfaces. The supporting methods colorimetric determination and ATP bioluminescence provided semi-quantitative results. The results from the radiochemical and supporting methods partly correlated with each other. From a material research point of view numerous new materials were evaluated. These included both laboratory-made model materials and commercial products. Increasing the amount of plasticizer decreased the cleanability of poly(vinyl chloride) (PVC) materials. Microstructured surfaces of plastics improved the cleanability of PVC from particle soils, whereas for oil soil microstructuring reduced the cleanability. In the case of glazed ceramic materials, coatings affected the cleanability. The roughness of surfaces correlated with cleanability from particle soils and the cleanability from oil soil correlated with the contact angles. Organic particle soil was removed more efficiently from TiO2-coated ceramic surfaces after UV-radiation than without UV treatment, whereas no effect was observed on the cleanability of oil soil. Coatings improved the cleanability of concrete flooring materials intended for use in animal houses.

Undersowing in a northern climate: effects on spring cereal yield and risk of nitrate leaching

Disadvantages of invariable cereal cropping, concern of nutrient leaching and prices of nitrogen (N) fertilizer have all increased during last decades. An undersown crop, which grows together with a main crop and after harvest, could mitigate all those questions. The aim of this study was to develop undersowing in Finnish conditions, so that it suits for spring cereal farming as well as possible and enhances taking care of soil and environment, especially when control of N is concerned. In total, 17 plant species were undersown in spring cereals during the field experiments between 1991-1999 at four sites in South and Central Finland, but after selection, eight of them were studied more thoroughly. Two legumes, one grass species and one mixture of them were included in long-term trials in order to study annually repeated undersowing. Further, simultaneous broadcasting of seeds instead of separate undersowing was studied. Grain yield response and the capacity of the undersown crop to absorb soil N or fix N from atmosphere, and the release of N were of greatest interest. Seeding rates of undersown crops and N fertilization rates during annually repeated undersowing were also studied. Italian ryegrass (Lolium multiflorum Lam., IR) absorbed soil nitrate N (NO3-N) most efficiently in autumn and timothy (Phleum pratense L.) in spring. The capacity of other grass species to absorb N was low, or it was insufficient considering the negative effect on grain yield. Red clover (Trifolium pratense L.) and white clover (Trifolium repens L.) suited well in annually repeated undersowing, supplying fixed N for cereals without markedly increased risk of N leaching. Autumn oriented growth rhythm of the studied legumes was optimal for undersowing, whereas the growth rhythm of grasses was less suited but varied between species. A model of adaptive undersowing system was outlined in order to emphasize allocation of measures according needs. After defining the goal of undersowing, many decisions are to be done. When diminishing N leaching is primarily sought, a mixture of IR and timothy is advantageous. Clovers suit for replacing N fertilization, as the positive residual effect is greater than the negative effect caused by competition. A mixture of legume and non legume is a good choice when increased diversity is the main target. Seeding rate is an efficient means for adjusting competition and N effects. Broadcasting with soil covering equipment can be used to establish an undersown crop. In addition, timing and method of cover crop termination have an important role in the outcome. Continuous observing of the system is needed as for instance conditions significantly affect growth of undersown crop and on the other hand N release from crop residues may increase in long run.

Winter feeding strategies for suckler cows in cold climatic conditions

In Finland, suckler cow production is carried out in circumstances characterized by a long winter period and a short grazing period. The traditional winter housing system for suckler cows has been insulated or uninsulated buildings, but there is a demand for developing less expensive housing systems. In addition, more information is needed on new winter feeding strategies, carried out in inexpensive winter facilities with conventional (hay, grass silage, straw) or alternative (treated straw, industrial by-product, whole-crop silage) feeds. The new feeding techniques should not have any detrimental effects on animal welfare in order to be acceptable to both farmers and consumers. Furthermore, no official feeding recommendations for suckler cows are available in Finland and, thus, recommendations for dairy cows have been used. However, this may lead to over- or underfeeding of suckler cows and, finally, to decreased economic output. In Experiment I, second-calf beef-dairy suckler cows were used to compare the effects of diets based on hay (H) or urea-treated straw (US) at two feeding levels (Moderate; M vs. Low; L) on the performance of cows and calves. Live weight (LW) gain during the indoor feeding was lower for cows on level L than on level M. Cows on diet US lost more LW indoors than those on diet H. The cows replenished the LW losses on good pasture. Calf LW gain and cow milk production were unaffected by the treatments. Conception rate was unaffected by the treatments but was only 69%. Urea-treated straw proved to be a suitable winter feed for spring-calving suckler cows. Experiment II studied the effects of feeding accuracy on the performance of first- and second-calf beef-dairy cows and calves. In II-1, the day-to-day variation in the roughage offered ranged up to ± 40%. In II-2, the same variation was used in two-week periods. Variation of the roughages offered had minor effects on cow performance. Reproduction was unaffected by the feeding accuracy. Accurate feeding is not necessary for young beef-dairy crosses, if the total amount of energy offered over a period of a few weeks fulfills the energy requirements. Effects of feeding strategies with alternative feeds on the performance of mature beef-dairy and beef cows and calves were evaluated in Experiment III. Two studies consisted of two feeding strategies (Step-up vs. Flat-rate) and two diets (Control vs. Alternative). There were no differences between treatments in the cow LW, body condition score (BCS), calf pre-weaning LW gain and cow reproduction. A flat-rate strategy can be practised in the nutrition of mature suckler cows. Oat hull based flour-mill by product can partly replace grass silage and straw in the winter diet. Whole-crop barley silage can be offered as a sole feed to suckler cows. Experiment IV evaluated during the winter feeding period the effects of replacing grass silage with whole-crop barley or oat silage on mature beef cow and calf performance. Both whole-crop silages were suitable winter feeds for suckler cows in cold outdoor winter conditions. Experiment V aimed at assessing the effects of daily feeding vs. feeding every third day on the performance of mature beef cows and calves. No differences between the treatments were observed in cow LW, BCS, milk production and calf LW. The serum concentrations of urea and long-chain fatty acids were increased on the third day after feeding in the cows fed every third day. Despite of that the feeding every third day is an acceptable feeding strategy for mature suckler cows. Experiment VI studied the effects of feeding levels and long-term cold climatic conditions on mature beef cows and calves. The cows were overwintered in outdoor facilities or in an uninsulated indoor facility. Whole-crop barley silage was offered either ad libitum or restricted. All the facilities offered adequate shelter for the cows. The restricted offering of whole-crop barley silage provided enough energy for the cows. The Finnish energy recommendations for dairy cows were too high for mature beef breed suckler cows in good body condition at housing, even in cold conditions. Therefore, there is need to determine feeding recommendations for suckler cows in Finland. The results showed that the required amount of energy can be offered to the cows using conventional or alternative feeds provided at a lower feeding level, with an inaccurate feeding, flat-rate feeding or feeding every third day strategy. The cows must have an opportunity to replenish the LW and BCS losses at pasture before the next winter. Production in cold conditions can be practised in inexpensive facilities when shelter against rain and wind, a dry resting place, adequate amounts of feed suitable for cold conditions and water are provided for the animals as was done in the present study.

Digestion capasity, nutrient digestibilities and physico-chemical conditions in the intestine influenced by the age of growing turkeys

Six experiments have been conducted to examine digestibility and feeding value of domestic Finnish fibre-rich cereals (barley and oats as compared to maize and wheat) and protein sources (rapeseed meal and cake, peas, faba beans, lupin seeds) for growing turkeys and to investigate effects of age of the birds (from 3 to 12 weeks of age) on digestion process and estimated nutrient digestibility and energy values. Besides, an objective of the study was to test applications of digestibility research methodology for turkeys. Total tract digestibility and apparent metabolizable energy (AME) was assayed in experimental cages using excreta collection, and a slaughter method was applied to sample small intestinal digesta for determination of apparent ileal crude protein digestibility (AICPD), jejuno-duodenal digesta viscosity and caecal volatile fatty acid (VFA) concentration. Digesta viscosity decreased and caecal VFA production increased with age of growing turkeys. Digesta retention times in the small intestine were generally longer in the older birds than in the younger ones. Crude fat digestibility and AME increased with age of growing turkeys, especially with viscous diets. AICPD seemed to decrease with age in most cases. Supplementation with β-gucanase-xylanase decreased viscosity, improved crude fat digestibility and metabolizable energy value and increased VFA production especially in barley-fed turkeys and especially in the young birds. Poor protein digestibility and low energy value of rapeseed meal and rapeseed cake decreased their feeding value for turkeys. In addition, a typical goitrogenic effect of rapeseed feeding was detected. Use of legume seeds as feed for growing turkeys is limited mostly by the low energy value in lupin seeds and the low ileal protein and amino acid digestibility in faba beans. Digestibility of fibre-rich protein sources was not improved with age of the turkeys. Euthanizing the turkeys for AICPD determination by carbon dioxide and bleeding led to lower digestibility values than mechanical stunning and cervical dislocation, suggesting inferiority of carbon dioxide stunning in experimental use. Comparison of AICPD and AME results obtained using different markers showed that considerable differences may occur, especially on total tract level, when acid-insoluble ash gave considerably lower AME values than titanium dioxide and chromic oxide.

Role of heat treatment in the processing and quality of oat flakes

This thesis reports on investigations into the influence of heat treatment on the manufacturing of oat flakes. Sources of variation in the oat flake quality are reviewed, including the whole chain from the farm to the consumer. The most important quality parameters of oat flakes are the absence of lipid hydrolysing enzymes, specific weight, thickness, breakage (fines), water absorption. Flavour, colour and pasting properties are also important, but were not included in the experimental part of this study. Of particular interest was the role of heat processing. The first possible heat treatment may occur already during grain drying, which in Finland generally happens at the farm. At the mill, oats are often kilned to stabilise the product by inactivating lipid hydrolysing enzymes. Almost invariably steaming is used during flaking, to soften the groats and reduce flake breakage. This thesis presents the use of a material science approach to investigating a complex system, typical of food processes. A combination of fundamental and empirical rheological measurements was used together with a laboratory scale process to simulate industrial processing. The results were verified by means of industrial trials. Industrially produced flakes at three thickness levels (nominally 0.75, 0.85 and 0.90 mm) were produced from kilned and unkilned oat groats, and the flake strength was measured at different moisture contents. Kilning was not found to significantly affect the force required to puncture a flake with a 2mm cylindrical probe, which was taken as a measure of flake strength. To further investigate how heat processing contributes to flake quality, dynamic mechanical analysis was used to characterise the effect of heat on the mechanical properties of oats. A marked stiffening of the groat, of up to about 50% increase in storage modulus, was observed during first heating at around 36 to 57°C. This was also observed in tablets prepared from ground groats and extracted oat starch. This stiffening was thus attributed to increased adhesion between starch granules. Groats were steamed in a laboratory steamer and were tempered in an oven at 80 110°C for 30 90 min. The maximum force required to compress the steamed groats to 50% strain increased from 50.7 N to 57.5 N as the tempering temperature was increased from 80 to 110°C. Tempering conditions also affected water absorption. A significantly higher moisture content was observed for kilned (18.9%) compared to unkilned (17.1%) groats, but otherwise had no effect on groat height, maximum force or final force after a 5 s relaxation time. Flakes were produced from the tempered groats using a laboratory flaking machine, using a roll gap of 0.4 mm. Apart from specific weight, flake properties were not influenced by kilning. Tempering conditions however had significant effects on the specific weight, thickness and water absorption of the flakes, as well as on the amount of fine material (<2 mm) produced during flaking. Flake strength correlated significantly with groat strength and flake thickness. Trial flaking at a commercial mill confirmed that groat temperature after tempering influenced water absorption. Variation in flake strength was observed , but at the groat temperatures required to inactivate lipase, it was rather small. Cold flaking of groats resulted in soft, floury flakes. The results presented in this thesis suggest that heating increased the adhesion between starch granules. This resulted in an increase in the stiffness and brittleness of the groat. Brittle fracture, rather than plastic flow, during flaking could result in flaws and cracks in the flake. These would be expected to increase water absorption. This was indeed observed as tempering temperature increased. Industrial trials, conducted with different groat temperatures, confirmed the main findings of the laboratory experiments. The approach used in the present study allowed the systematic study of the effect of interacting process parameters on product quality. There have been few scientific studies of oat processing, and these results can be used to understand the complex effects of process variables on flake quality. They also offer an insight into what happens as the oat groat is deformed into a flake.

Tracking and identifying wastewater toxicants and assessing their biodegradation products

Screening of wastewater effluents from municipal and industrial wastewater treatment plants with biotests showed that the treated wastewater effluents possess only minor acute toxic properties towards whole organisms (e.g. bacteria, algae, daphnia), if any. In vitro tests (sub-mitochondrial membranes and fish hepatocytes) were generally more susceptible to the effluents. Most of the effluents indicated the presence of hormonally active compounds, as the production of vitellogenin, an egg yolk precursor protein, was induced in fish hepatocytes exposed to wastewater. In addition, indications of slight genotoxic potential was found in one effluent concentrate with a recombinant bacteria test. Reverse electron transport (RET) of mitochondrial membranes was used as a model test to conduct effluent assessment followed by toxicant characterisations and identifications. Using a modified U.S. EPA Toxicity Identification Evaluation Phase I scheme and additional case-specific methods, the main compound in a pulp and paper mill effluent causing RET inhibition was characterised to be an organic, relatively hydrophilic high molecular weight (HMW) compound. The toxicant could be verified as HMW lignin by structural analyses using nuclear magnetic resonance. In the confirmation step commercial and in-house extracted lignin products were used. The possible toxicity related structures were characterised by statistical analysis of the chemical breakdown structures of laboratory-scale pulping and bleaching effluents and the toxicities of these effluents. Finally, the biological degradation of the identified toxicant and other wastewater constituents was evaluated using bioassays in combination with chemical analyses. Biological methods have not been used routinely in establishing effluent discharge limits in Finland. However, the biological effects observed in this study could not have been predicted using only routine physical and chemical effluent monitoring parameters. Therefore chemical parameters cannot be considered to be sufficient in controlling effluent discharges especially in case of unknown, possibly bioaccumulative, compounds that may be present in small concentrations and may cause chronic effects.

Nutrition and Nutritional Care of Elderly People in Finnish Nursing Homes and Hospitals

Background: Malnutrition is a common problem for residents of nursing homes and long-term care hospitals. It has a negative influence on elderly residents and patients health and quality of life. Nutritional care seems to have a positive effect on elderly individuals nutritional status and well-being. Studies of Finnish elderly people s nutrition and nutritional care in institutions are scarce. Objectives: The primary aim was to investigate the nutritional status and its associated factors of elderly nursing home residents and long-term care patients in Finland. In particular, to find out, if the nursing or nutritional care factors are associated with the nutritional status, and how do carers and nurses recognize malnutrition. A further aim was to assess the energy and nutrient intake of the residents of dementia wards. A final objective was to find out, if the nutrition training of professionals leads to changes in their knowledge and further translate into better nutrition for the aged residents of dementia wards. Subjects and methods: The residents (n=2114) and patients (n=1043) nutritional status was assessed in all studies using the Mini Nutritional Assessment test (MNA). Information was gathered in a questionnaire on residents and patients daily routines providing nutritional care. Residents energy and nutrient intake (n=23; n=21) in dementia wards were determined over three days by the precise weighing method. Constructive learning theory was the basis for educating the professionals (n=28). A half-structured questionnaire was used to assess professionals learning. Studies I-IV were cross-sectional studies whereas study V was an intervention study. Results: Malnutrition was common among elderly residents and patients living in nursing homes and hospitals in Finland. According to the MNA, 11% to 57% of the studied elderly people suffered from malnutrition, and 40-89% were at risk of malnutrition, whereas only 0-16% had a good nutritional status. Resident- and patient-related factors such as dementia, impaired ADL (Activities of Daily Living), swallowing difficulties and constipation mainly explained the malnutrition, but also some nutritional care related factors, such as eating less than half of the offered food portion and not receiving snacks were also related to malnutrition. The intake of energy and some nutrients by the residents of dementia wards were lower than those recommended, although the offered food contained enough energy and nutrients. The proportion of residents receiving vitamin D supplementation was low, although there is a recommendation and known benefits for the adequate intake of vitamin D. Nurses recognized malnutrition poorly, only one in four (26.7%) of the actual cases. Keeping and analysing food diaries and reflecting on nutritional issues in small group discussions were effective training methods for professionals. The nutrition education of professionals had a positive impact on the energy and protein intake, BMIs, and the MNA scores of some residents in dementia wards. Conclusions: Malnutrition was common among elderly residents and patients living in nursing homes and hospitals in Finland. Although residents- and patient related factors mainly explained malnutrition, nurses recognized malnutrition poorly and nutritional care possibilities were in minor use. Professionals nutrition education had a positive impact on the nutrition of elderly residents. Further studies describing successful nutritional care and nutrition education of professionals are needed.