Functional Surfaces for Microfluidics in Proteomic Analysis

Microchips for use in biomolecular analysis show a lot of promise for medical diagnostics and biomedical basic research. Among the potential advantages are more sensitive and faster analyses as well as reduced cost and sample consumption. Due to scaling laws, the surface are to volume ratios of microfluidic chips is very high. Because of this, tailoring the surface properties and surface functionalization are very important technical issues for microchip development. This thesis studies two different types of functional surfaces, surfaces for open surface capillary microfluidics and surfaces for surface assisted laser desorption ionization mass spectrometry, and combinations thereof. Open surface capillary microfluidics can be used to transport and control liquid samples on easily accessible open surfaces simply based on surface forces, without any connections to pumps or electrical power sources. Capillary filling of open partially wetting grooves is shown to be possible with certain geometries, aspect ratios and contact angles, and a theoretical model is developed to identify complete channel filling domains, as well as partial filling domains. On the other hand, partially wetting surfaces with triangular microstructures can be used for achieving directional wetting, where the water droplets do not spread isotropically, but instead only spread to a predetermined sector. Furthermore, by patterning completely wetting and superhydrophobic areas on the same surface, complex droplet shapes are achieved, as the water stretches to make contact with the wetting surface, but does not enter into the superhydrophobic domains. Surfaces for surface assisted laser desorption ionization mass spectrometry are developed by applying various active thin film coatings on multiple substrates, in order to separate surface and bulk effects. Clear differences are observed between both surface and substrate layers. The best performance surfaces consisted of amorphous silicon coating and an inorganic-organic hybrid substrate, with nanopillars and nanopores. These surfaces are used for matrix-free ionization of drugs, peptides and proteins, and for some analytes, the detection limits were in the high attomoles. Microfluidics and laser desorption ionization surfaces are combined on a functionalized drying platforms, where the surface is used to control the shape of the deposited analyte droplet, and the shape of the initial analyte droplet affects the dried droplet solute deposition pattern. The deposited droplets can then directly detected by mass spectrometry. Utilizing this approach, results of analyte concentration, splitting and separation are demonstrated.

"Ei sitä ainakaan helpommaksi tehdä sairaan opiskelijan elämää" : Pitkäaikaissairaiden kokemuksia korkeakoulutuksen esteistä ja mahdollisuuksista

This study examines the experiences of students with chronic illnesses in higher education. I chose to study rheumatic and other musculoskeletal diseases because they are group of diseases that are nationally significant in Finland. From students experiences I do interpretation of their agency. My research problems are: What kind of obstacles and possibilities student with chronic illness experiences in studying? What kind of obstacles illness set up for the agency or does it set any? How agency of student with chronic illness shows in the context of the university? I collected the data by using interview and focus group method. Additionally I had different kinds of documents of accessibility and equality in the university. Interviews were like halfstructured theme and open interviews. Focus group method I have applied. All the people that participated in the study were students from the university of Helsinki. They all have rheumatic or other musculoskeletal diseases. I have five interviewees and the group consisted of two people and the researcher. In the data analysis I use categorizing by the themes. Students that participated in my study spoke about their pain related experiences of their illness which also connected to their experiences of the higher education. Students agencies were limited the more they experienced pain. Pain forces students to certain activity one actions avoidance and another s favouring. If part-time studying would have been possible economically, it would have made the life easier for a part of the students. Students were aware of the available resources of their body for some of the students illness and life control set challenge and for some it set conditions. Students thought that university education is more possible to them than vocational education. Students didn t feel their own body limited in the context of university that emphasize intellectual and knowledge connected values and some of the students had reversed their illness as a resource of studying. However students felt their illness as a private matter and they considered illness profit and disadvantage before telling about it, which I interpretated limiting students agencies. In the university terms of students agencies were bond to individuality that came up in positive and negative. Freedom of studying was positive but official and individual study accommodations made agency bounded. Majority of the students didn t see possibilities to do differently in the university s practice but some of the students had recognised values underneath the practices that made it possible to reflect them, do differently and made space for agency.

Eteva Järvenpään perhepalvelukeskuksen lyhytaikaishoidon suunnittelun kehittäminen

Objectives. The thesis objective was to analyze how person-centred planning is applied to develop short term care in interaction between the disabled children, their families and the workers of the family service centre of Eteva Järvenpää. The thesis contributes to developing the methods of person-centred planning. I applied theoretical frameworks of activity theory and developmental work research, family-based work framework and disability phenomenon. The research questions were: What development needs did the families of disabled children have for the services? How were viewpoints of disabled children, their families and Eteva workers noticed in person-centred planning in the interaction between the disabled children, their families and Eteva workers? What disturbances and development challenges emerged during the person-centred planning? Methods. I first analysed the local history of the disability sector and the short term care to analyse challenges arising from the local history. The actural research material consisted of interviews with four families, two person-centred planning discussions and two discussions where the person-centred planning was reflected by the families.I used interaction voice analysis as defined by the activity theory and developmental work research. From the recorded interviews and discussions I analysed scripts, disturbances, innovation attempts and innovations. From the discussions I analysed also the interaction types (cooperation, coordination and communication). Results and conclusions. As problems, the families considered the scarce resources and the inflexibility of services. The challenges of developing the short term care were how to transfer information from short term care to home, how to develop activities for the children and how to take into account the individual needs of the children in the short term care. Both from the local history analysis and from the family interviews arised the conflict between caring and fulfilling the individual needs. In person-centred planning, the voice of the child was either interpreted by other family members or guided by family members or workers. I modelled the progress of person-centred planning in a two-dimensional coordination. Person-centred planning should be deepened in cooperation between the child, the family and the workers in everyday situations at home and during the short term care. The challenge is to expand person-centred planning to become cross-organizational cooperation connecting the actors of the child s service network in everyday life. Avainsanat Nyckelord - Keywords short term care, activity theory and developmental work research, person-centred planning, disability

Learning Challenges in Biogas Production for Sustainability : An activity theoretical study of a network from a swine industry chain

This study is about the challenges of learning in the creation and implementation of new sustainable technologies. The system of biogas production in the Programme of Sustainable Swine Production (3S Programme) conducted by the Sadia food processing company in Santa Catarina State, Brazil, is used as a case example for exploring the challenges, possibilities and obstacles of learning in the use of biogas production as a way to increase the environmental sustainability of swine production. The aim is to contribute to the discussion about the possibilities of developing systems of biogas production for sustainability (BPfS). In the study I develop hypotheses concerning the central challenges and possibilities for developing systems of BPfS in three phases. First, I construct a model of the network of activities involved in the BP for sustainability in the case study. Next, I construct a) an idealised model of the historically evolved concepts of BPfS through an analysis of the development of forms of BP and b) a hypothesis of the current central contradictions within and between the activity systems involved in BP for sustainability in the case study. This hypothesis is further developed through two actual empirical analyses: an analysis of the actors senses in taking part in the system, and an analysis of the disturbance processes in the implementation and operation of the BP system in the 3S Programme. The historical analysis shows that BP for sustainability in the 3S Programme emerged as a feasible solution for the contradiction between environmental protection and concentration, intensification and specialisation in swine production. This contradiction created a threat to the supply of swine to the food processing company. In the food production activity, the contradiction was expressed as a contradiction between the desire of the company to become a sustainable company and the situation in the outsourced farms. For the swine producers the contradiction was expressed between the contradictory rules in which the market exerted pressure which pushed for continual increases in scale, specialisation and concentration to keep the production economically viable, while the environmental rules imposed a limit to this expansion. Although the observed disturbances in the biogas system seemed to be merely technical and localised within the farms, the analysis proposed that these disturbances were formed in and between the activity systems involved in the network of BPfS during the implementation. The disturbances observed could be explained by four contradictions: a) contradictions between the new, more expanded activity of sustainable swine production and the old activity, b) a contradiction between the concept of BP for carbon credits and BP for local use in the BPfS that was implemented, c) contradictions between the new UNFCCC1 methodology for applying for carbon credits and the small size of the farms, and d) between the technologies of biogas use and burning available in the market and the small size of the farms. The main finding of this study relates to the zone of proximal development (ZPD) of the BPfS in Sadia food production chain. The model is first developed as a general model of concepts of BPfS and further developed here to the specific case of the BPfS in the 3S Programme. The model is composed of two developmental dimensions: societal and functional integration. The dimension of societal integration refers to the level of integration with other activities outside the farm. At one extreme, biogas production is self-sufficient and highly independent and the products of BP are consumed within the farm, while at the other extreme BP is highly integrated in markets and networks of collaboration, and BP products are exchanged within the markets. The dimension of functional integration refers to the level of integration between products and production processes so that economies of scope can be achieved by combining several functions using the same utility. At one extreme, BP is specialised in only one product, which allows achieving economies of scale, while at the other extreme there is an integrated production in which several biogas products are produced in order to maximise the outcomes from the BP system. The analysis suggests that BP is moving towards a societal integration, towards the market and towards a functional integration in which several biogas products are combined. The model is a hypothesis to be further tested through interventions by collectively constructing the new proposed concept of BPfS. Another important contribution of this study refers to the concept of the learning challenge. Three central learning challenges for developing a sustainable system of BP in the 3S Programme were identified: 1) the development of cheaper and more practical technologies of burning and measuring the gas, as well as the reduction of costs of the process of certification, 2) the development of new ways of using biogas within farms, and 3) the creation of new local markets and networks for selling BP products. One general learning challenge is to find more varied and synergic ways of using BP products than solely for the production of carbon credits. Both the model of the ZPD of BPfS and the identified learning challenges could be used as learning tools to facilitate the development of biogas production systems. The proposed model of the ZPD could be used to analyse different types of agricultural activities that face a similar contradiction. The findings could be used in interventions to help actors to find their own expansive actions and developmental projects for change. Rather than proposing a standardised best concept of BPfS, the idea of these learning tools is to facilitate the analysis of local situations and to help actors to make their activities more sustainable.

Työntekijän näkökulmat ja oppiminen ulkoistusprojektissa : "Aluks pelkää muutosta ja sit pelkää, ettei mikään muutukaan."

The aim of this master s thesis was to clarify employees views on outsourcing. The main questions of the study were 1) How the employees dealt with the change created by outsourcing and what things they felt important when implementing the change? 2) What kind of organizational questions the employees paid attention to when moving from one organization to another? 3) What kind of management issues the employees brought up in the outsourcing process? and 4) How the employees reflected change while experienced outsourcing? The theoretical foundations of the study were Jack Mezirow s theory of transformational learning and Yrjö Engeström s theory of expansive learning. The management of outsourcing was viewed by John P. Kotter s change management model. Research casted light on transformation and learning on four levels of analysis: on individual, organizational and management levels and on the level of reflection. The target of the study were the outsourced employees, who were moved from a Finnish public corporation to a private ITC organization along with the services they produce. The study material was eleven interviews from the outsourced employees. The study was implemented by fenomenographical theme analysis. The analysis revealed results in all four levels. On the individual level the main results were the importance of systematic and open information, meaning of social and technical integration and the feeling of employee s own control. On the organizational level the move from the public sector to private and all the changes in organizational culture and in fringe benefitswere fundamental. Organizational learning was analyzed with expansive learning theory. Expanding was perceived in four dimensions: temporal dimension, spatial dimension, responsibility-moral dimension and developmental dimension. On the management level the actions of one s closest manager was vital, as was the upper management s clear engagement and a shared view of the necessity of a change. In the data was found employees reflective talking, which was indicating the meaning of the change and which was interpreted from the learning point of view. According to this study, it is possible to identify and analyze reflective talk and that way have information about employees learning in an organizational change. It was prominent to notice how reflection in the process of outsourcing is extremely versatile and extensive.