Yksi historia monimutkaistuvasssa maailmassa : Historian olemus ja historian suuret kertomukset luokanopettajaopiskelijoiden historiatietoisuudessa

One history in a multicomplex world The quintessence of history and grand historical narratives in the historical consciousness of class teacher students The study analyses the conception of history amongst class teacher students at the University of Helsinki. It also explores the expectations about the future that the students have on the basis of their views on history. The conceptions of the students are analysed against the background of the notion of one history which has been part of Western thought in the modern era and which is at the centre of the theoretical framework of this study. The Enlightenment project and the erosion of the role of the Church paved the way for the notion that history is an linear narrative of the progress of humankind and in which, implicitly, the Western countries are endowed with a special role as the vanguards of progress. In recent times these assumptions have been criticised by postmodernists and proponents of New History. The material of the study consists of interviews of twenty-two 19 26 years old class teacher students at the University of Helsinki. The topics in the interviews were the developments of the past and the future trajectories. The students conceived history as a field of knowledge that provides a unifying view on the world and helps to make today s world intelligible. Finnish history and global history were invested with features of a grand narrative of progress. In global history, progress and development were seen as characteristic of the Western world primarily. The students regarded the post-war Finnish history as a qualified success story in that they deplored the erosion of collectivist values and the rise of selfishness in recent decades. History was not conceived as a process of progress that would self-evidently continue in the future, but rather more as a field of contingency and cyclical change.The students regarded the increasing predominance of the market forces over democratically elected agencies, the antagonism between the West and the other parts of the world, and environmental risks as the major threats. Notwithstanding this general.pessimism about the future, the students had a very positive view of their own personal prospects. Keywords: historical consciouness, one history, future expectations

Linnunkiikut ja kallen kaulukset : Kotitekoiset kuukautissiteet 1900-luvun alkupuolen Suomessa

The aim of this thesis was to study what kind of home-made menstrual pads were used in the early 20th century in Finland, how the home-made pads were made and which techniques and materials were used. The use and taking care of menstrual pads were also explored. The history of menstrual pads has been studied in Sweden, Germany and United States but none of those studies has concentrated on home-made pads. Instead, there are many studies about womanhood and menstruation. In many studies home-made menstrual pads are only briefly mentioned. Menstrual pads were not commonly used in Finland at the beginning of the 20th century, but already in the 1940s the use of menstrual pads had become common in every stratum of society. Home-made menstrual pads were used even until the 1960s. In Finland, factory-made disposable menstrual pads became common only in the 1930s and they were only slowly accepted. The study material consisted of nine interviews, three archival inquiries, health care guidebooks from 1893 to 1943 and authentic menstrual pads, menstrual belts and other objects related to them. The interviewed women were born between 1915 and 1939. The narrative approach was used in the study and it also guided the analysis. The interview and archival data were studied according to the basic rules of oral history studies. Literature consisted of publications from several disciplines. The extensive primary material played the most important role in this study. The reconstructions of the menstrual pads were made according to the interviewed women s advice. In Finland there were innumerable variations of home-made menstrual pads. The pads were most commonly crocheted and knitted either by hand or by knitting machine. Pads were also sewn of cloth, old bed linen or old underwear. The menstrual pads were self-made or made by a female relative. Word of mouth was important in spreading information on how to make pads, because there were hardly any instructions available. The biggest pads were 54 cm long and 13 cm wide. The most widely used pad model was a rectangle, which had triangle-shaped ends with a buttonhole or a loop. The pad was attached to the menstrual belt or to the buttons of the suspender belt. Knitted and crocheted pads had one, two or three layers. In sewn pads, there could be even more layers. Cellulose wadding or pieces of cloth could be placed inside the pad to increase the absorption ability. The experiences of the comfort of self-made pads varied. The crocheted and sewn pads were found chafing, knitted ones were found soft and comfortable. The menstrual pads were laborious to wash and boil in lye water. Therefore disposable pads made everyday life easier. The home-made menstrual pads were part of a unique tradition of handicrafts and folk culture. Hand-made pads were one of the most common handicraft products and were a part of every woman s life. Even so, the menstrual pads were unnoticeable. The large number of variations was probably caused by the silence around menstrual topics and by the lack of instructions for making pads. Variations are also explained by the uniqueness of every handicraft product. In Finland the home-made pads were used until relatively recent times. This was caused by the conditions of wartime and the following years and the rarity of commercial pads. Furthermore, until the late 20th century Finland was an agricultural society where all innovations spread slowly. Home-made menstrual pad was a secret handicraft of women and every woman needed to know how to make it by herself.

Kinnasneulatekniikan verkko-oppimateriaalin kehittäminen ja neulalla neulomisen taidon kehittyminen

The purpose of the study was to develop a functional web-based learning material for the learning of the nålbinding technique. The study of the research topic was already begun in my pedagogical thesis in 2008 by considering the demands on pedagogic material for the teaching of the technique. This study falls into the field of qualitative design research which was carried out through three stages. In the study three methods of usability testing, i.e. expert analysis, the informants’ thinking aloud and interviews, were used as research methods. At the first stage of the study the first version of the learning material was created. This was done on the basis of theoretical knowledge, the demands set on learning materials as clarified in previous studies, on the basis of previously created learning materials for the learning of the nålbinding technique as well as with the help of two experts on the technique. At the second stage, the learning material was developed on the basis of expert analysis and another version of the material was created. At the third stage, usability testing was carried out on the material. At this stage two informants used the material, practiced stitching with the nålbinding needle and thought aloud while doing so. In the usability testing the Morae –programme was used to record the events on the screen, the actions of the informants and their spoken out thoughts. The Morae –programme was also used when analysing the recordings. After the testing, the informants practised stitching independently and in a few weeks time they were interviewed. The interviews were aimed at finding out the informants’ opinions on the future development of the material. On the basis of the informants’ independent attempts at using the nålbinding technique, the development of their skills after the testing was also discussed at the interviews. The development of the learning material will continue after this study on the basis of the usability testing and the interviews. The web-based learning material was created for the website Käspaikka in the address www.kaspaikka.fi/kinnasneula. By creating a multimodal learning material the dual-coding theory by Paivio was taken into consideration. According to the theory, several methods of presentation help a learner to restore information in his/her memory. The independent construction of the learner’s knowledge, i.e. learning according to the principles of the constructivist learning theory, was also supported by creating a logical navigation system, by linking interrelated topics to one another and by presenting the topics in several different forms. In the test situations the learning material was judged to work well when practising stitching with the nålbinding needle. Both informants learned the basics of the nålbinding technique even though their respective learning strategies were quite different. In the usability testing illogicalities and shortcomings were still noticed in the learning material which will still be further developed in the future.

Preventive Dentistry and Dental Education in Iran

The present study investigated the preventive orientation of the dental education system in Iran as reflected in the responses of dental school educators and dental students to a questionnaire survey. Two questionnaires, one for dental school educators and one for senior dental students, were designed and piloted. Of the 15 state dental schools in Iran, 7 were selected using a multi-stage sampling approach, and all the dental school educators and senior dental students in these schools were asked to voluntarily fill in the anonymous questionnaires. Totally, 291 educators (80%) and 270 students (82%) participated in the study. In addition to background information, both questionnaires requested information on knowledge of caries prevention, attitudes towards preventive dentistry and oral health behaviour of the respondents. The students' questionnaire also covered items concerning prevention-oriented practice, study motives, and career preferences. Contrary to knowledge and attitudes of the students, those of the educators' were positively associated with some of their academic and personal background characteristics. Women were more likely to report favourable oral self-care habits than men. The other determinants of oral health behaviour were educators' familiarity with the oral public health field, and students' attitudes towards prevention. A higher score on preventive practice among the students was associated with better oral self-care habits and positive attitudes towards prevention. Characteristics of the profession and social status and security were the top-ranked that motivated students to study dentistry, and students mainly preferred to enter postgraduate courses and private practice after graduation. To increase the orientation of Iran's health care system towards prevention, and to cope with current concepts of prevention, corresponding changes should be made in the dental education system. The results of this study support the revision of the dental curriculum by placing more emphasis on prevention-related topics and by integrating prevention-related concepts into all disciplines. Additionally, practicing dentists and dental educators should be provided with opportunities to attend continuing education courses and to conduct seminars and congresses on various aspects of preventive dentistry at home as well as abroad.

Predictors of disability retirement: From early intentions to retirement

The strong tendency of elderly employees to retire early and the simultaneous aging of the population have been major topics of policy and scientific debate. A key concern has been the financing of future pension schemes and possible labour shortage, especially in social and health services within the public sector. The aging of the population is inevitable, but efforts can be made to prevent or postpone early exit from the labour force, e.g., by identifying and intervening in the factors that contribute to the process of early retirement due to disability. The associations of intentions to retire early, poor mental health and different psychosocial factors with the process of disability retirement are still poorly understood. The purpose of this study was to investigate the associations of intentions to retire early, poor mental health, work and family related psychosocial factors and experiences of earlier life stages with the process of disability retirement. The data were derived from the Helsinki Health Study (HHS, N=8960) and the Health and Social Support Study (HeSSup, N=25 901). The Helsinki Health Study is an ongoing employee cohort study among middle-aged women and men. The Health and Social Support Study is an ongoing longitudinal study of a working-age sample representative of the Finnish population. The analyses were restricted to respondents 40 years of age or older. Age and gender adjusted prevalence and incidence rates were calculated. Associations were studied by using logistic, multinomial and Cox regression. Strong intentions to retire early were common among employees. Poor mental health, unfavourable working conditions and work-to-family conflicts were clearly associated with increased intentions to retire early. Strong intentions to retire early predicted disability retirement. Risk of disability retirement increased in a dose-response manner with increasing number of childhood adversities. Poor mental and somatic health, life dissatisfaction, heavy alcohol consumption, current smoking, obesity and low socioeconomic status were also predictors of disability retirement. The impact of poor mental health and adverse experiences from earlier life stages, work and family related psychosocial factors, e.g., work-family interface, the subjective experience of well-being and health related risk behaviours on the process of disability retirement should be recognised. Preventive measures against disability retirement should be launched before subjective experience of ill health, work disability and strong intentions to retire early emerge.

Konsumerismi, potilaiden ja kuluttajien aktiivinen toiminta sekä erityisesti lääkäreiden kokemukset ja näkemykset potilaista kuluttajina

Consumerism emphasises the patient s position and freedom of choice. Consumerism is being promoted by a range of phenomena occurring in society and health care. Different actors hold different views on the patient as a consumer and on his or her participation. Consumer demand is created outside the patient physician relationship and the commercialisation of services generates new expectations with respect to physician s work. More and more patients may be interested in adopting a more equal position in the care relationship, and trying to negotiate with the physician or to even dictate how he or she should be cared for. In Finland, very little research has been conducted on patients and consumers organising themselves at national system level, patients as choosers, and physicians attitudes to various consumerist phenomena or the choice made by the patient. In the empirical data for this study, the term consumer-patient refers to active consumers and patients making choices related to their clinical care prior to a physician s diagnosis. Consumer-patients are also represented by consumer and patient organisations and movements. The main research question is: How do physicians regard the care choice made by the patient? This question is addressed from a perspective encompassing patients and consumers organised activities and individuals active behaviour in health care as well as physicians experiences and their views on patients as consumers making choices related to their care. The first part (Study I), examines the patient organisation field, information sources used including the websites of such organisations, files from Finland s Slot Machine Association, RAY, a survey conducted by a Finnish television news department and interviews of patient organisations. Based on observation and a physician survey, Study II examines physicians attitudes to the idea that patients could obtain information through consumer movements about physicians care practices before seeking medical care. Studies III−IV use a physician survey to examine physicians attitudes to direct-to-consumer-advertising of prescription drugs (DTCA) and their experiences and views of patient requests related to treatments and examinations. Study V uses comparative surveys to examine the attitudes of health care professionals and the population to the introduction of new technologies in health care, using genetic screenings and tests as an example. The number of patient organisations increased, with a particular escalation as of the 1990s. The characteristics and operating methods of the organisations varied greatly. Physicians organisations adopted a negative or neutral attitude towards the consumer movements idea of distributing information on care practices, whereas individual physicians attitudes were slightly more positive. Physicians regarded direct-to-consumer-advertising of prescription drugs as negative, but took a more permissive attitude towards indirect advertising. More than every third physician considered drug advertisements in general to be harmful or useless in the distribution of drug information to patients or consumers. More than half of physicians conducting patient work reported that they (very) often encountered patients who stated upon arrival for a consultation that they wanted specific treatments or examinations, and that the number of such situations had increased. Such situations were viewed as positive with regard to the care relationship by every fifth physician and as negative by two fifths. Physicians justified a reserved attitude to the patients consumer role by referring to their medical expertise and position as care decision-makers, the patient physician relationship and the public health care system. Reasons for a positive attitude included the patient s participation and co-operation, the patient physician relationship and the patient s knowledge. Professionals were more reserved than lay people about the introduction and extension of genetic technologies in health care. A significant minority of the physicians did not take a clear pro or con attitude to the patients consumer role or to the use of new technologies in health care. The physicians age, gender, place of work and specialisation influenced their attitudes to the patient s consumer role, and private physicians viewed it in a more positive light than those working in public health care. Active consumer-patients challenge the society to hold a discussion of the patient s choice, participation in care decision-making and participation in health care policy in general. Their transformation into customers and consumers implies not only a new division of individuals roles and powers, but also contributes to changing relationships between system level roles: between citizens and the state and between public and private health care. This phenomenon raises various issues related to health care policy. In conclusion, topics are presented for discussion, practical measures and further research. Keywords: health care, consumerism, distribution of technologies, commercialisation, physicians, patients, consumers, patient s choice, patient s role.

Regulation of strawberry growth and development

Strawberries (Fragaria sp.) are adapted to diverse environmental conditions from the tropics to about 70ºN, so different responses to environmental conditions can be found. Most genotypes of garden strawberry (F. x ananassa Duch.) and woodland strawberry (F. vesca L.) are short-day (SD) plants that are induced to flowering by photoperiods under a critical limit, but also various photoperiod x temperature interactions can be found. In addition, continuously flowering everbearing (EB) genotypes are found. In addition to flowering, axillary bud differentiation in strawberry is regulated by photoperiod. In SD conditions, axillary buds differentiate to rosette-like structures called "branch crowns", whereas in long-day conditions (LD) they form runners, branches with 2 long internodes followed by a daughter plant (leaf rosette). The number of crown branches determines the yield of the plant, since inflorescences are formed from the apical meristems of the crown. Although axillary bud differentiation is an important developmental process in strawberries, its environmental and hormonal regulation has not been characterized in detail. Moreover, the genetic mechanisms underlying axillary bud differentiation and regulation of flowering time in these species are almost completely unresolved. These topics have been studied in this thesis in order to enhance strawberry research, cultivation and breeding. The results showed that 8-12 SD cycles suppressed runner initiation from the axillary buds of the garden strawberry cv. Korona with the concomitant induction of crown branching, and 3 weeks of SD was sufficient for the induction of flowering in the main crown. Furthermore, a second SD treatment given a few weeks after the first SD period can be used to induce flowering in the primary branch crowns and to induce the formation of secondary branches. Thus, artificial SD treatments effectively stimulate crown branching, providing one means for the increase of cropping (yield) potential in strawberry. It was also shown by growth regulation applications, quantitave hormone analysis and gene expression analysis that gibberellin (GA) is one of the key signals involved in the photoperiod control of shoot differentiation. The results indicate that photoperiod controls GA activity specifically in axillary buds, thereby determining bud fate. It was further shown that chemical control of GA biosynthesis by prohexadione-calcium can be utilized to prevent excessive runner formation and induce crown branching in strawberry fields. Moreover, ProCa increased berry yield up to 50%, showing that it is an easier and more applicable alternative to artificial SD treatments for controlling strawberry crown development and yield. Finally, flowering gene pathways in Fragaria were explored by searching for homologs of 118 Arabidopsis thaliana flowering-time genes. In total, 66 gene homologs were identified, and they distributed to all known flowering pathways, suggesting the presence of these pathways also in strawberry. Expression analysis of selected genes revealed that the mRNA of putative floral identity gene APETALA1 accumulated in the shoot apex of the EB genotype after the induction of flowering, whereas it was absent in vegetative SD genotype, indicating the usefulness of this gene product as the marker of floral initiation. The present data enables the further exploration of strawberry flowering pathways with genetic transformation, gene mapping and transcriptomics methods.

Physical characterization of plastic surfaces in wearing and cleanability research

Plastic surfaces are a group of materials used for many purposes. The present study was focused on methods for investigation of surface topography, wearing and cleanability of polyvinyl chloride (PVC) model surfaces and industrial plastic surfaces. Contact profilometry, scanning electron microscopy (SEM) and atomic force microscopy (AFM) are powerful methods for studying the topography of plastic surfaces. Although they have their own limitations, they are together an effective tool providing useful information on surface topography, especially when studying laboratory-made PVC model surfaces with known chemical compositions and structures. All examined laboratory-made PVC plastic surfaces examined in this work could be considered as smooth according to both AFM and profilometer measurements because height differences are in the nanoscale on every surface. Industrial plastic surfaces are a complex group of materials because of their chemical and topographical heterogeneity, but they are nevertheless important reference materials when developing cleaning and wearing methods. According to the results of this study the Soiling and Wearing Drum and the Frick-Taber methods are very useful when simulating three-body wearing of plastic surfaces. Both the investigated wearing methods can be used to compare the wearing of different plastic materials using appropriate evaluation methods of wearing and industrial use. In this study, physical methods were developed and adapted from other fields of material research to cleanability studies. The thesis focuses on the methodology for investigating the cleanability of plastic surfaces under realistic conditions, where surface topography and the effect of wear cleanability were among the major topics. A colorimetric method proved to be suitable for examining the cleanability of the industrial plastic surfaces. The results were utilized to evaluate the relationship between cleanability and the surface properties of plastic surfaces. The devices and methods used in the work can be utilized both in material research and product development.

Median muotoilema : Muotoilun mediajulkisuus suomalaisessa talouslehdistössä

Designed by the Media The Media publicity of Design in the Finnish Economic Press The meaning of design has increased in consumer societies. Design is the subject of debate and the number of media discussions has also increased steadily. Especially the role of industrial design has been emphasised. In this study I examine the media publicity of design in the Finnish economic press from the late 1980s to the beginning of the 2000s. The research question is connected to media representations: How is design represented in the Finnish economic press? In other words, what are the central topics of design in the economic press, and to what issues are the media debates connected? The usually repeated phrase that design discussions take place only on the cultural pages of the daily press or in cultural contexts is being changed. Design is also linked to the consumer culture and consumers everyday practices. The research material has been collected from the Finnish economic press. The qualitative sample consists of articles from Kauppalehti, Taloussanomat and from several economic papers published by the Talentum Corporation. The approach of the research is explorative, descriptive and hermeneutic. This means that the economic press articles are used to explore how design is represented in the media. In addition, the characteristics of design represented in the media are described in detail. The research is based on the interpretive tradition of studying textual materials. Background assumptions are thus grounded in hermeneutics. Erving Goffman s frame analysis is applied in analysing the economic press materials. The frames interpreted from the articles depict the media publicity of design in the Finnish economic press. The research opens up a multidimensional picture of design in the economic press. The analysis resulted in five frames that describe design from various points of view. In the personal frame designers are described in private settings and through their personal experiences. The second frame relates to design work. In the frame of mastery of the profession, the designers work is interpreted widely. Design is considered from the aspects of controlling personal know-how, co-operation and the overall process of design. The third frame is connected to the actual substance of the economic press. In the frame of economy and market, design is linked to international competitiveness, companies competitive advantage and benefit creation for the consumers. The fourth frame is connected to the actors promoting design on a societal level. In the communal frame, the economic press describes design policy, design research and education and other actors that actively develop design in the societal networks. The last frame is linked to the traditions of design and above all to the examination of the cultural transition. In the frame of culture the traditions of design are emphasised. Design is also connected to the industrial culture and furthermore to the themes of the consumer culture. It can be argued that the frames construct media publicity of design from various points of view. The frames describe situations, action and the actors of design. The interpreted media frames make it possible to understand the relation of interpreted design actions and the culture. Thus, media has a crucial role in representing and recreating meanings related to design. The publicity of design is characterised by the five focal themes: personification, professionalisation, commercialisation, communalisation and transition of cultural focus from the traditions of design to the industrial culture and the consumer culture. Based on my interpretation these themes are guided by the mediatisation of design. The design phenomenon is defined more often on the basis of the media representations in the public discourses. The design culture outlined in this research connects socially constructed and structurally organised action. Socially constructed action in design is connected to the experiences, social recreation and collective development of design. Structurally, design is described as professional know-how, as a process and as an economic profit generating action in the society. The events described by the media affect the way in which people experience the world, the meanings they connect to the events around themselves and their life in the world. By affecting experiences, the media indirectly affects human actions. People have become habituated to read media representations on a daily basis, but they are not used to reading and interpreting the various meanings that are incorporated in the media texts.

The success of the diversified farm : resource-based view

Farms and rural areas have many specific valuable resources that can be used to create non-agricultural products and services. Most of the research regarding on-farm diversification has hitherto concentrated on business start-up or farm survival strategies. Resource allocation and also financial success have not been the primary focus of investigations as yet. In this study these specific topics were investigated i.e. resource allocation and also the financial success of diversified farms from a farm management perspective. The key question addressed in this dissertation, is how tangible and intangible resources of the diversified farm affect the financial success. This study’s theoretical background deals with resource-based theory, and also certain themes of the theory of learning organisation and other decision-making theories. Two datasets were utilised in this study. First, data were collected by postal survey in 2001 (n = 663). Second, data were collected in a follow-up survey in 2006 (n = 439). Data were analysed using multivariate data analyses and path analyses. The study results reveal that, diversified farms performed differently. Success and resources were linked. Professional and management skills affected other resources, and hence directly or indirectly influenced success per se. In the light of empirical analyses of this study, tangible and intangible resources owned by the diversified farm impacted on its financial success. The findings of this study underline the importance of skills and networks for entrepreneur(s). Practically speaking all respondents of this study used either agricultural resources for non-farm businesses or non-farm resources for agricultural enterprises. To share resources in this way was seen as a pragmatic opportunity recognised by farmers. One of the downsides of diversification might be the phenomenon of over-diversification, which can be defined as the situation in which a farm diversifies beyond its optimal limit. The empirical findings of this study reveal that capital and labour resource constrains did have adverse effects on financial success. The evidence indicates that farms that were capital and labour resource constrained in 2001 were still less profitable than their ‘no problems’ counterparts five years later.

Organized Nanostructures of Thermoresponsive Poly(N-isopropylacrylamide) Block Copolymers Obtained Through Controlled RAFT Polymerization

Kontrolloidut radikaalipolymerointimenetelmät, kuten RAFT-polymerointi, ovat moderni tapa valmistaa polymeerejä säädellysti. RAFT-polymeroinnilla polymeerien ketjunpituutta, moolimassajakaumaa, mikrorakennetta (taktisuus, järjestys), koostumusta ja funktionaalisuutta kyetään hallitsemaan. Siten menetelmällä voidaan valmistaa uudenlaisia polymeeriarkkitektuureja, kuten blokki- ja tähtipolymeerejä, sekä hybridimateriaaleja ja biokonjugaatteja. Polymeeristen rakennuspalikoiden itsejärjestyminen, missä huolellisesti syntetisoidut polymeerit järjestyvät halutulla tavalla nanoskaalassa, on suosittu tutkimuskohde materiaalitieteessä. On huomattava, että blokkipolymeerien itsejärjestyminen on vielä suhteellisen nuori tutkimusaihe. Tämän hetkiset polymeeriset nanomateriaalit ovat suhteellisen yksinkertaisia luonnon luomuksiin verrattuina, tarjoten jatkuvasti uusia mahdollisuuksia seuraavan sukupolven polymeereille. Tässä työssä RAFT-polymeroinnilla syntetisoitiin amfifiilisiä di- ja triblokkikopolymeerejä sekä tutkittiin niiden järjestymistä nanorakenteiksi. Kaikissa blokkikopolymeereissä käytettiin lämpöherkkää poly(N-isopropyyliakryyliamidia). Siten polymeerit ja tutkitut materiaalit reagoivat lämpötilanmuutokseen ympäristössä eli ovat ns. ympäristöherkkiä. Työssä tutkittiin taktisuuden kontrollointia N-isopropyyliakryyliamidin RAFT-polymeroinnissa. Polymeerin taktisuutta sekä ketjunpituutta ja blokkijärjestystä säätämällä voitiin hallita polymeerin itsejärjestymistä vesiliuoksessa. Amfifiiliset polymeerit järjestyivät laimeissa vesiliuoksissa erilaisiksi misellirakenteiksi, muodostaen ns. mikrosäiliöitä. Tällaisilla polymeereillä odotetaan olevan sovelluksia esim. lääkeainevapautuksessa. Amfifiilejä käytetään myös esimerkiksi apuaineina pinnoitteissa ja kosmetiikassa. Kiinteässä tilassa tutkitut triblokkikopolymeerit muodostivat teoreettisesti ennustettuja morfologioita. Lämpöherkän materiaalin hydrogeelit toimivat suodatinmembraanina nanokokoluokassa. RAFT-polymeroinnilla syntetisoituja polymeereja voidaan sellaisenaan käyttää kultananopartikkeleiden päällystämiseen. Kultananopartikkelit ovat erittäin kiinostavia mm. niiden stabiilisuuden ja ainutlaatuisten pintaominaisuuksien vuoksi. Kun amfifiilisiä polymeerejä kiinnitettiin kultapartikkelin pinnalle, sen liuos- ja optisia ominaisuuksia voitiin säädellä pH:n ja lämpötilan avulla. Tällaisilla kultananopartikkeleilla on sovelluksia mm. diagnostiikassa, sensoreina ja solukuvauksessa.

On probability-based inference under data missing by design

Whether a statistician wants to complement a probability model for observed data with a prior distribution and carry out fully probabilistic inference, or base the inference only on the likelihood function, may be a fundamental question in theory, but in practice it may well be of less importance if the likelihood contains much more information than the prior. Maximum likelihood inference can be justified as a Gaussian approximation at the posterior mode, using flat priors. However, in situations where parametric assumptions in standard statistical models would be too rigid, more flexible model formulation, combined with fully probabilistic inference, can be achieved using hierarchical Bayesian parametrization. This work includes five articles, all of which apply probability modeling under various problems involving incomplete observation. Three of the papers apply maximum likelihood estimation and two of them hierarchical Bayesian modeling. Because maximum likelihood may be presented as a special case of Bayesian inference, but not the other way round, in the introductory part of this work we present a framework for probability-based inference using only Bayesian concepts. We also re-derive some results presented in the original articles using the toolbox equipped herein, to show that they are also justifiable under this more general framework. Here the assumption of exchangeability and de Finetti's representation theorem are applied repeatedly for justifying the use of standard parametric probability models with conditionally independent likelihood contributions. It is argued that this same reasoning can be applied also under sampling from a finite population. The main emphasis here is in probability-based inference under incomplete observation due to study design. This is illustrated using a generic two-phase cohort sampling design as an example. The alternative approaches presented for analysis of such a design are full likelihood, which utilizes all observed information, and conditional likelihood, which is restricted to a completely observed set, conditioning on the rule that generated that set. Conditional likelihood inference is also applied for a joint analysis of prevalence and incidence data, a situation subject to both left censoring and left truncation. Other topics covered are model uncertainty and causal inference using posterior predictive distributions. We formulate a non-parametric monotonic regression model for one or more covariates and a Bayesian estimation procedure, and apply the model in the context of optimal sequential treatment regimes, demonstrating that inference based on posterior predictive distributions is feasible also in this case.

Bayesian Inference for Retrospective Population Genetics Models Using Markov Chain Monte Carlo Methods

Genetics, the science of heredity and variation in living organisms, has a central role in medicine, in breeding crops and livestock, and in studying fundamental topics of biological sciences such as evolution and cell functioning. Currently the field of genetics is under a rapid development because of the recent advances in technologies by which molecular data can be obtained from living organisms. In order that most information from such data can be extracted, the analyses need to be carried out using statistical models that are tailored to take account of the particular genetic processes. In this thesis we formulate and analyze Bayesian models for genetic marker data of contemporary individuals. The major focus is on the modeling of the unobserved recent ancestry of the sampled individuals (say, for tens of generations or so), which is carried out by using explicit probabilistic reconstructions of the pedigree structures accompanied by the gene flows at the marker loci. For such a recent history, the recombination process is the major genetic force that shapes the genomes of the individuals, and it is included in the model by assuming that the recombination fractions between the adjacent markers are known. The posterior distribution of the unobserved history of the individuals is studied conditionally on the observed marker data by using a Markov chain Monte Carlo algorithm (MCMC). The example analyses consider estimation of the population structure, relatedness structure (both at the level of whole genomes as well as at each marker separately), and haplotype configurations. For situations where the pedigree structure is partially known, an algorithm to create an initial state for the MCMC algorithm is given. Furthermore, the thesis includes an extension of the model for the recent genetic history to situations where also a quantitative phenotype has been measured from the contemporary individuals. In that case the goal is to identify positions on the genome that affect the observed phenotypic values. This task is carried out within the Bayesian framework, where the number and the relative effects of the quantitative trait loci are treated as random variables whose posterior distribution is studied conditionally on the observed genetic and phenotypic data. In addition, the thesis contains an extension of a widely-used haplotyping method, the PHASE algorithm, to settings where genetic material from several individuals has been pooled together, and the allele frequencies of each pool are determined in a single genotyping.

On Orlicz-Sobolev capacities

This thesis consists of three articles on Orlicz-Sobolev capacities. Capacity is a set function which gives information of the size of sets. Capacity is useful concept in the study of partial differential equations, and generalizations of exponential-type inequalities and Lebesgue point theory, and other topics related to weakly differentiable functions such as functions belonging to some Sobolev space or Orlicz-Sobolev space. In this thesis it is assumed that the defining function of the Orlicz-Sobolev space, the Young function, satisfies certain growth conditions. In the first article, the null sets of two different versions of Orlicz-Sobolev capacity are studied. Sufficient conditions are given so that these two versions of capacity have the same null sets. The importance of having information about null sets lies in the fact that the sets of capacity zero play similar role in the Orlicz-Sobolev space setting as the sets of measure zero do in the Lebesgue space and Orlicz space setting. The second article continues the work of the first article. In this article, it is shown that if a Young function satisfies certain conditions, then two versions of Orlicz-Sobolev capacity have the same null sets for its complementary Young function. In the third article the metric properties of Orlicz-Sobolev capacities are studied. It is usually difficult or impossible to calculate a capacity of a set. In applications it is often useful to have estimates for the Orlicz-Sobolev capacities of balls. Such estimates are obtained in this paper, when the Young function satisfies some growth conditions.

Numerical computation of the module of a quadrilateral

The module of a quadrilateral is a positive real number which divides quadrilaterals into conformal equivalence classes. This is an introductory text to the module of a quadrilateral with some historical background and some numerical aspects. This work discusses the following topics: 1. Preliminaries 2. The module of a quadrilateral 3. The Schwarz-Christoffel Mapping 4. Symmetry properties of the module 5. Computational results 6. Other numerical methods Appendices include: Numerical evaluation of the elliptic integrals of the first kind. Matlab programs and scripts and possible topics for future research. Numerical results section covers additive quadrilaterals and the module of a quadrilateral under the movement of one of its vertex.