Postoperative soft tissue defects in the ankle area : The etiology and methods of reconstruction

The risk is obvious for soft tissue complications after operative treatment of the Achilles tendon, calcaneal bone or after ankle arthroplasty. Such complications after malleolar fractures are, however, seldom seen. The reason behind these complications is that the soft tissue in this region is tight and does not allow much tension to the wound area after surgery. Furthermore the area of operation may be damaged by swelling after the injury, or can be affected by peripheral vascular disease. While complications in this area are unavoidable, they can be diminished. This study attempts to highlight the possible predisposing factors leading to complications in these operations and on the other hand, to determine the solutions to solve soft tissue problems in this region. The study consists of five papers. The first article is a reprint on the soft tissue reconstruction of 25 patients after their complicated Achilles tendon surgeries were analysed. The second study reviews a series of 126 patients after having undergone an operative treatment of calcaneal bone fractures and analyses the complications and possible reasons behind them. The third part analyses a series of corrections of 35 soft tissue complications after calcaneal fracture operations. The fourth part reviews a series of 7 patients who had undergone complicated ankle arthroplasties. The last article presents a series of post operative lateral defects of the ankle treated with a less frequently used distally based peroneus brevis muscle flap and analyses the results. What can be conducted from these studies is that in general, the results after the correction of even severe soft tissue complications in the ankle region are good. For the small defects around the Achilles tendon, the local flaps are useful, but the larger defects are best treated with a free flap. We found that a long delay from trauma to surgery and a long operating time were predisposing factors that lead to soft tissue complications after operatively treated calcaneal bone fractures. The more severe the injury, the greater the risk for wound complication. Surprisingly, the long-term results after infected calcaneal osteosyntheses were acceptable and the calcaneal bone seems to tolerate chronic infections very well if the soft tissue is reconstructed successfully. Behind the complicated ankle arthroplasties, unexpectedly high number of cases experiencing arteriosclerosis of the lower extremity was found. These complications lead to ankle fusion but can be solved with a free flap if the vascularity is intact or can be reconstructed. For this reason a vascular examination of the lower extremity arteries of the patients going to ankle arthroplasty is strongly recommended. Moreover postoperative lateral malleolar wound infections which typically create lateral ankle defects can successfully be treated with a peroneus brevis muscle flap covered with a free skin graft.

Immigrant Associations in the Metropolitan Area of Finland : Forms of Mobilisation, Participation and Representation

This study examines the role of immigrant associations in the societal and political integration of immigrants into Finnish society. The societal focus is on the ability of immigrant associations to mobilise their ethnic group members to participate in the socio-economic, cultural and political domains of Finnish society and in certain cases even beyond. The political integrative aims are the opportunities of immigrant associations to participate and represent the interests of their ethnic group in local and national policy making. This study focuses on associations in the Metropolitan Area of Finland, (Espoo, Helsinki and Vantaa).The qualitative research consisted of 71 interviews conducted with members of immigrant associations and civil servants. These interviews were mainly semi-structured, including some additional open-ended questions. Additional data consisted of documents, planning reports and of follow-up enquiries. -- In the analysis of the data I categorised thirty-two immigrant associations according to the activity forms and the description of the goals by the members. The four categories consisted of integrative, societal, ethno-cultural and transnational immigrant associations. Most of the immigrant associations belonged to the integrative category (15 of 32 associations). On the one hand the aims of these associations are to provide access for their ethnic group members into Finnish society, while on the other to strengthen the ethnic identity of their members by organising ethno-cultural activities. The societal associations only focused on activities with the objective of including immigrants into the Finnish labour market and educational system. The goal of ethno-cultural associations was to strengthen the ethnic identity of their ethnic group members. The transnational associations aimed at improving the living conditions of women and children in the members' country of origin. The possibilities for immigrant associations to mobilise their members depends partly on external financing. Subsidies have been allocated for societal activities in particular. There remains a risk of the crowding out of ethno-cultural activities: something which has already taken place in several European countries. Immigrant associations aim to strengthen the identity of immigrants mainly by organising social and ethno-cultural activities. Another important target was to provide peer support and therapy courses. Additionally, immigrant women's associations offer assistance to women who have encountered violence by providing counselling and in some cases access to shelter. The data showed that there is an ever growing need to pay heed to the well-being of women, children and elderly immigrants. The participation of immigrant associations in the municipalities' integrative issues takes place mainly through cooperative projects. Until the end of the 1990s there had not been much cooperation. The problem with the projects was that they had mainly been managed by civil servants, whereas members from immigrant associations had remained in a more passive position. Representation of immigrant associations in councils has been fairly weak. Immigrant associations are included in the multicultural councils of Espoo and Vantaa, but only in the planning stages. The municipality of Helsinki does not include immigrant associations due to the large number of organisations which causes problems in finding fair, democratic representation. At the national level, the ‘Advisory Board for Ethnic Relations’ – ETNO didn’t chose its members based on membership of ethnic associations, but based on belongingness to one of the larger language groups spoken by the foreign population in Finland. Since ETNO’s third period (2005-2007), the representatives of immigrant associations and ethnic minority groups have been chosen from proposed candidates. Key words: immigrant associations, integration, mobilisation, participation, representation, the Metropolitan area of Finland, immigrant (women), civil servants

Mass spectrometry and n-in-one analytics in early drug discovery: Combinatorial chemistry libraries, lipophilicity and absorption screening

This thesis describes current and past n-in-one methods and presents three early experimental studies using mass spectrometry and the triple quadrupole instrument on the application of n-in-one in drug discovery. N-in-one strategy pools and mix samples in drug discovery prior to measurement or analysis. This allows the most promising compounds to be rapidly identified and then analysed. Nowadays properties of drugs are characterised earlier and in parallel with pharmacological efficacy. Studies presented here use in vitro methods as caco-2 cells and immobilized artificial membrane chromatography for drug absorption and lipophilicity measurements. The high sensitivity and selectivity of liquid chromatography mass spectrometry are especially important for new analytical methods using n-in-one. In the first study, the fragmentation patterns of ten nitrophenoxy benzoate compounds, serial homology, were characterised and the presence of the compounds was determined in a combinatorial library. The influence of one or two nitro substituents and the alkyl chain length of methyl to pentyl on collision-induced fragmentation was studied, and interesting structurefragmentation relationships were detected. Two nitro group compounds increased fragmentation compared to one nitro group, whereas less fragmentation was noted in molecules with a longer alkyl chain. The most abundant product ions were nitrophenoxy ions, which were also tested in the precursor ion screening of the combinatorial library. In the second study, the immobilized artificial membrane chromatographic method was transferred from ultraviolet detection to mass spectrometric analysis and a new method was developed. Mass spectra were scanned and the chromatographic retention of compounds was analysed using extract ion chromatograms. When changing detectors and buffers and including n-in-one in the method, the results showed good correlation. Finally, the results demonstrated that mass spectrometric detection with gradient elution can provide a rapid and convenient n-in-one method for ranking the lipophilic properties of several structurally diverse compounds simultaneously. In the final study, a new method was developed for caco-2 samples. Compounds were separated by liquid chromatography and quantified by selected reaction monitoring using mass spectrometry. This method was used for caco-2 samples, where absorption of ten chemically and physiologically different compounds was screened using both single and nin- one approaches. These three studies used mass spectrometry for compound identification, method transfer and quantitation in the area of mixture analysis. Different mass spectrometric scanning modes for the triple quadrupole instrument were used in each method. Early drug discovery with n-in-one is area where mass spectrometric analysis, its possibilities and proper use, is especially important.

Modelling the dynamics of a large sea area

Yhteenveto: Laajan merialueen dynamiikan mallintaminen

Late Pleistocene and Holocene environmental evolution of the Murchisonfjorden area, Nordaustlandet, Svalbard

The purpose of this study was to establish the palaeoenvironmental conditions during the late Quaternary in Murchisonfjorden, Nordaustlandet, based on foraminiferal assemblage compositions, and to determine the onset and termination of the Weichselian glaciations. The foraminiferal assemblage compositions were studied in marine sediments from three different archives, from sections next to the present shoreline in the Bay of Isvika, from a core in the Bay of Isvika and from a core from Lake Einstaken. OSL and AMS 14C age determinations were performed on samples from the three archives, and the results show deposition of marine sediments during ice-free periods of the Early Weichselian, the Middle Weichselian and the Late Weichselian, as well as during the Holocene in the investigated area. Marine sediments from the Early and Middle Weichselian were sampled from isostatically uplifted sections along the present shoreline.Sediments from the transition from the Late Weichselian to early Holocene time intervals were found in the bottom of the core from Lake Einstaken. Holocene sediments were investigated in the sections and in the core from the Bay of Isvika. The marine sediments from the sections are comprised of five benthic foraminiferal assemblages. The Early Weichselian is represented by two foraminiferal assemblages, the Middle Weichselian, the early and the late Holocene each by one. All five foraminiferal assemblages were deposited in glacier-distal shallow-water environments, which had a connection to the open ocean. Changes in the composition of the assemblages can be ascribed to differences in the bottom-water currents and changes in the salinity. The Middle Weichselian assemblage is of special importance, because it is the first foraminiferal assemblage to be described from this time interval from Svalbard. Four benthic foraminiferal assemblages were deposited shortly before the marine to lacustrine transition at the boundary between the Late Weichselian and Holocene in Lake Einstaken. The foraminiferal assemblages show a change from a high-arctic, normal marine shallow-water environment to an even shallower environment with highly fluctuating salinity. The analyses of the core from 100 m water depth in the Bay of Isvika resulted in the determination of four foraminiferal assemblages. These indicated changes from a glacier-proximal environment during deglaciation, to a more glacier-distal environment during the Early Holocene. This was followed by a period with a marked change to a considerably cooler environment and finally to a closed fjord environment in the middle and late Holocene times. Additional sedimentological analyses of the marine and glacially derived sediments from the uplifted sections, as well as observations of multiple striae on the bedrock, observations of deeply weathered bedrock and findings of tills interlayered with marine sediments complete the investigations in the study area. They indicate weak glacial erosion in the study area. It can be concluded that marine deposition occurred in the investigated area during three time intervals in the Weichselian and during most of the Holocene. The foraminiferal assemblages in the Holocene are characterized by a transition from glacier-proximal to glacier-distal faunas. The palaeogeographical change from an open fjord to a closed fjord environment is a result of the isostatic uplift of the area after the LGM and is clearly reflected in the foraminiferal assemblages. Another influencing factor on the foraminiferal assemblage composition are changes in the inflow of warmer Atlantic waters to the study area.

Analisi contrastiva delle modalità di traduzione in finnico dei Tempi verbali e delle perifrasi aspettuali dell'italiano

Analisi contrastiva delle modalità di traduzione in finnico dei Tempi verbali e delle perifrasi aspettuali dell italiano (Italian Philology) The topic of this research is a contrastive study of tenses and aspect in Italian and in Finnish. The study aims to develop a research method for analyzing translations and comparable texts (non-translation) written in a target language. Thus, the analysis is based on empirical data consisting of translations of novels from Italian to Finnish and vice versa. In addition to this, for the section devoted to solutions adopted in Finnish for translating the Italian tenses Perfetto Semplice and Perfetto Composto, 39 Finnish native speakers were asked to answer questions concerning the choice of Perfekti and Imperfekti in Finnish. The responses given by the Finnish informants were compared to the choices made by translators in the target language, and in this way it was possible both to benefit from the motivation provided by native speakers to explain the selection of a tense (Imperfekti/Perfekti) in a specific context compared with the Italian formal equivalents (Perfetto Composto/Perfetto Semplice), and to define the specific features of the Finnish verb tenses. The research aims to develop a qualitative method for the analysis of formal equivalents and translational changes ( shifts ). Although, as the choice of Italian and Finnish progressive forms is optional and related to speaker preferences, besides the qualitative analysis, I also considered it necessary to operate a quantitative one in order to find out whether the two items share the same degree of correspondence in frequency of use. In this study I explain translation choices in light of cognitive grammar, suggesting that particular translation relationships derive from so-called construal operations. I use the concepts of cognitive linguistics not only to analyze the convergences and divergences of the two aspectual systems, but also to redefine some general procedures related to the phenomenon of translation. For the practical analysis of the corpus were for the most part employed theoretical categories developed in a framework proposed by Pier Marco Bertinetto. Following this approach, the notions of aspect (the morphologic or morphosyntactic, subjective level) and actionality (the lexical aspect or objective level, traditionally Aktionsart) are carefully distinguished. This also allowed me to test the applicability of these distinctions to two languages typologically different from each other. The data allowed both the analysis of the semantic and pragmatic features that determine tense and aspect choices in these two languages, and to discover the correspondences between the two language systems and the strategies that translators are forced to resort to in particular situations. The research provides not only a detailed and analytically argued inventory about possible solutions for translating Italian tenses and aspectual devices in Finnish that could be of pedagogical relevance, but also new contributions about the specific uses of time-aspectual devices in the two languages in question.

Selective-Area Atomic Layer Deposition

Atomic layer deposition (ALD) is a method to deposit thin films from gaseous precursors to the substrate layer-by-layer so that the film thickness can be tailored with atomic layer accuracy. Film tailoring is even further emphasized with selective-area ALD which enables the film growth to be controlled also on the substrate surface. Selective-area ALD allows the decrease of a process steps in preparing thin film devices. This can be of a great technological importance when the ALD films become into wider use in different applications. Selective-area ALD can be achieved by passivation or activation of a surface. In this work ALD growth was prevented by octadecyltrimethoxysilane, octadecyltrichlorosilane and 1-dodecanethiol SAMs, and by PMMA (polymethyl methacrylate) and PVP (poly(vinyl pyrrolidone) polymer films. SAMs were prepared from vapor phase and by microcontact printing, and polymer films were spin coated. Microcontact printing created patterned SAMs at once. The SAMs prepared from vapor phase and the polymer mask layers were patterned by UV lithography or lift-off process so that after preparation of a continuous mask layer selected areas of them were removed. On these areas the ALD film was deposited selectively. SAMs and polymer films prevented the growth in several ALD processes such as iridium, ruthenium, platinum, TiO2 and polyimide so that the ALD films did grow only on areas without SAM or polymer mask layer. PMMA and PVP films also protected the surface against Al2O3 and ZrO2 growth. Activation of the surface for ALD of ruthenium was achieved by preparing a RuOX layer by microcontact printing. At low temperatures the RuCp2-O2 process nucleated only on this oxidative activation layer but not on bare silicon.