Sireenit, floksit ja iirikset- Puu-Käpylän koristekasvit

Puu-Käpylä (“Wooden Käpylä”), a neighbourhood of Helsinki, is the earliest example of the Garden City Movement in Finland. The suburb of valuable wooden architecture was built between 1920 and 1925, with the aim to provide a healthy housing area for working-class families with many children. The houses were erected by a co-operative (Käpylän kansanasunnot, “People?s Dwellings”) and they are protected by the city plan since 1960?s. However, the historical value of the sheltered courtyards has not been investigated. The aim of this study was to survey the garden flora of Puu-Käpylä and to evaluate the authenticity of the courtyard gardens. The survey covered the area of one residential quarter (1.2 ha) with twelve 2-storey semi-detached timber houses arranged around a common yard, which was originally appointed for the tenants? vegetable gardens. The houses are still rented, and each flat is allowed a small lot of the courtyard for cultivation. A complete list was made of all perennial, ornamental plant taxa present in the quarter. Spring bulbs were missed due to the timing of the survey. Generally, the plants were recorded on species level, with the exception of common lilacs, shrub roses, irises and peonies that were thoroughly studied for cultivar identification. It was assumed that plants initially grown in the courtyard could be distinguished by studying Finnish garden magazines, books and nursery catalogues published in the 1920?s and by comparing the present vegetation to surviving documents from the quarter. The total number of ornamental plant taxa identified was 172, of which 17 were trees, 47 shrubs, 7 climbers and 101 herbaceous perennials. The results indicated that a major part of the shrubs, climbers and perennials presumably originated from the 1970?s or later, whereas ca. 70 % of the tree specimens were deemed as original. The survey disclosed a heritage variety of common lilac, resembling cultivar „Prince Notger?, a specific peony taxon, Paeonia humilis Retz., cultivated in Nordic countries since long ago, and a few historic iris varieties. Well-preserved design elements included front gardens on one side of the quarter, a maple alley on another side as well as trees at the garden gates. Old garden books and magazines did not shed much light on the Finnish garden flora commonly used in the period when Puu-Käpylä was built. However, they gave a valuable picture of contemporary planting design. Nursery catalogues offered insight into the assortment of ornamental plants traded in the 1920?s. Conclusions on the authenticity of the current flora were mainly drawn on the basis of old photographs and a vegetation survey map drawn in the 1970?s. This study revealed a need for standardization of syrvey methods applied when investigating garden floras. Uniform survey techniques would make the results comparable and enable a future compilation of data from e.g. historic gardens.

Captured by conventions : On objectivity and factuality in international news agency discourse

The thesis explores the discourse of two global news agencies, the Associated Press (AP) and Reuters, which together with the French AFP are generally regarded as the world s leading news distributors. A glance at the guidelines given by AP and Reuters to their journalists shows that these two news agencies make a lot of effort to strive for objectivity the well-known journalistic ideal, which, however, is an almost indefinable concept. In journalism textbooks definitions of objectivity often contain various components: detachment, nonpartisanship, facticity, balance, etc. AP and Reuters, too, in their guidelines, present several other ideals besides objectivity , viz., reliability, accuracy, balance, freedom from bias, precise sourcing, reporting the truth, and so on. Other central concepts connected to objectivity are neutrality and impartiality. However, objectivity is, undoubtedly, the term that is most often mentioned when the ethics of journalism is discussed, acting as a kind of umbrella term for several related journalistic ideals. It can even encompass the other concept that is relevant for this study, that of factuality. These two intertwined concepts are extremely complex; paradoxically, it is easier to show evidence of the lack of objectivity or factuality than of their existence. I argue that when journalists conform to the deep-rooted conventions of objective news reporting, facts may be blurred, and the language becomes vague and ambiguous. As global distributors of news, AP and Reuters have had an influential role in creating and reinforcing conventions of (at least English-language) news writing. These conventions can be seen to work at various levels of news reporting: the ideological (e.g., defining what is regarded as newsworthy, or who is responsible), structural (e.g., the well-known inverted pyramid model), and stylistic (e.g., presupposing that in hard news reports, the journalist s voice should be backgrounded). On the basis of my case studies, I have found four central conventions to be worthy of closer examination: the conventional structure of news reports, the importance of newsworthiness, the tactics of impersonalisation which tends to blur news actors responsibility, and the routines of presenting emotions. My linguistic analyses draw mainly on M.A.K. Halliday s Systemic Functional Grammar, on notions of transitivity, ergativity, nominalisation and grammatical metaphor. The Appraisal framework, too, has provided useful tools for my analyses. The thesis includes six case studies dealing with the following topics: metaphors in political reporting, terrorism discourse, terrorism fears, emotions more generally, unnamed sources as rhetorical constructs, and responsibility in the convention of attribution.

A Method for Comparing Scholarly Journals as Service Providers to Authors

When authors of scholarly articles decide where to submit their manuscripts for peer review and eventual publication, they often base their choice of journals on very incomplete information abouthow well the journals serve the authors’ purposes of informing about their research and advancing their academic careers. The purpose of this study was to develop and test a new method for benchmarking scientific journals, providing more information to prospective authors. The method estimates a number of journal parameters, including readership, scientific prestige, time from submission to publication, acceptance rate and service provided by the journal during the review and publication process. Data directly obtainable from the web, data that can be calculated from such data, data obtained from publishers and editors, and data obtained using surveys with authors are used in the method, which has been tested on three different sets of journals, each from a different discipline. We found a number of problems with the different data acquisition methods, which limit the extent to which the method can be used. Publishers and editors are reluctant to disclose important information they have at hand (i.e. journal circulation, web downloads, acceptance rate). The calculation of some important parameters (for instance average time from submission to publication, regional spread of authorship) can be done but requires quite a lot of work. It can be difficult to get reasonable response rates to surveys with authors. All in all we believe that the method we propose, taking a “service to authors” perspective as a basis for benchmarking scientific journals, is useful and can provide information that is valuable to prospective authors in selected scientific disciplines.

Use of Document Management Systems - a Case Study of the Finnish Construction Industry

Triggered by the very quick proliferation of Internet connectivity, electronic document management (EDM) systems are now rapidly being adopted for managing the documentation that is produced and exchanged in construction projects. Nevertheless there are still substantial barriers to the efficient use of such systems, mainly of a psychological nature and related to insufficient training. This paper presents the results of empirical studies carried out during 2002 concerning the current usage of EDM systems in the Finnish construction industry. The studies employed three different methods in order to provide a multifaceted view of the problem area, both on the industry and individual project level. In order to provide an accurate measurement of overall usage volume in the industry as a whole telephone interviews with key personnel from 100 randomly chosen construction projects were conducted. The interviews showed that while around 1/3 of big projects already have adopted the use of EDM, very few small projects have adopted this technology. The barriers to introduction were investigated through interviews with representatives for half a dozen of providers of systems and ASP-services. These interviews shed a lot of light on the dynamics of the market for this type of services and illustrated the diversity of business strategies adopted by vendors. In the final study log files from a project which had used an EDM system were analysed in order to determine usage patterns. The results illustrated that use is yet incomplete in coverage and that only a part of the individuals involved in the project used the system efficiently, either as information producers or consumers. The study also provided feedback on the usefulness of the log files.

From Creative Ideas to New Emerging Ventures: Entrepreneurial Processes among Finnish Design Entrepreneurs

This study focuses on self-employed industrial designers and how they emerge new venture ideas. More specifically, this study strives to determine what design entrepreneurs do when they create new venture ideas, how venture ideas are nurtured into being, and how the processes are organized to bring such ideas to the market in the given industrial context. In contemporary times when the concern for the creative class is peaking, the research and business communities need more insight of the kind that this study provides, namely how professionals may contribute to their entrepreneurial processes and other agents’ business processes. On the one hand, the interviews underlying this study suggest that design entrepreneurs may act as reactive service providers who are appointed by producers or marketing parties to generate product-related ideas on their behalf. On the other hand, the interviews suggest that proactive behaviour that aims on generating own venture ideas, may force design entrepreneurs to take considerable responsibility in organizing their entrepreneurial processes. Another option is that they strive to bring venture ideas to the market in collaboration, or by passing these to other agents’ product development processes. Design entrepreneurs’ venture ideas typically emerge from design related starting points and observations. Product developers are mainly engaged with creating their own ideas, whereas service providers refer mainly to the development of other agents’ venture ideas. In contrast with design entrepreneurs, external actors commonly emphasize customer demand as their primary source for new venture ideas, as well as development of these in close interaction with available means of production and marketing. Consequently, design entrepreneurs need to address market demand since without sales their venture ideas may as well be classified as art. In case, they want to experiment with creative ideas, then there should be another source of income to support this typically uncertain and extensive process. Currently, it appears like a lot of good venture ideas and resources are being wasted, when venture ideas do not suite available production or business procedures. Sufficient communication between design entrepreneurs and other agents would assist all parties in developing production efficient and distributable venture ideas. Overall, the findings suggest that design entrepreneurs are often involved simultaneously in several processes that aim at emerging new product related ventures. Consequently, design entrepreneurship is conceptualized in this study as a dual process. This implies that design entrepreneurs can simultaneously be in charge of their entrepreneurial processes, as they operate as resources in other agents’ business processes. The interconnection between activities and agents suggests that these kinds of processes tend to be both complex and multifaceted to their nature.

“Empire is a state of mind” – Imagining Eurasia in Russia –

Työssäni tarkastelen venäläistä neo-euraasianistista liikettä ja tapoja joilla liikkeen aktivistit rakentavat Euraasiasta yhtenäistä kokonaisuutta ja imperiumia. Keskeisiä tutkimuskysymyksiäni ovat: Mikä imperiumi on ja mitkä ovat sen keskeisiä motivaatioita ja teemoja? Kuinka imperiumin idea rakentuu tai käsitetään ja tämän voi tulkita? Minkälaisia seurauksia voi tulkita heidän tavallaan Euraasia nähdä olevan? Materiaalina käytän haastatteluja, jotka on kerätty Moskovassa keväällä 2008, ja liikkeen kirjallisia tuotoksia (lehdet ja Internet -sivut). Neo-euraasianistisella liikkeellä tarkoitan tässä työssä Kansainvälistä Euraasianistista liikettä (Meždunarodnoe Evrazijskoe Dviženie) ja sen alahaaraa Euraasianistista Nuorisoliittoa (Evrazijskij Sojuz Molodëži). Liike perustettiin virallisesti 2003, mutta rakentaa vahvasti historiallista yhteyttä 1930 -luvun klassiseen eurasianismiin. Tämän lisäksi sen diskurssissa on paljon neuvostoliittolaisia, fasistisia, uuskonservatiivisia ja nationalistisia piirteitä. Liikkeen johtohahmo on filosofi-geopoliitikko Alexandr Dugin. Työn tausta-ajatuksena minua kiinnostaa etenkin nk. älymystön tai intelligenttien vaikutus nationalismiin tai sosiaalisia ryhmiä määrittelevien diskurssien kehitykseen ja muutokseen.Tarkastelen materiaalia diskurssianalyyttisesta näkökulmasta. Näen diskurssianalyysin sen tutkimisena, miten sosiaalista todellisuutta tuotetaan erilaisissa sosiaalisissa käytännöissä. Samalla näiden diskurssien tutkiminen, foucautlaisen perinteen myötä, tarkastelee kriittisesti niiden tuottamia (aktualisoituneita sekä potentiaalisia) valtasuhteita. Käytän työssäni myös Benedict Andersonin kuvitellun yhteisön (imagined communities) käsitettä, joka auttaa hahmottamaan tapaa, jolla tutkimuskohteeni rakentavat imperiumia yhteisönä. Aktivistien puheessa imperiumi (imperiâ) tulee esiin pääasiallisesti positiivisesti ja ”heidän omanaan,” kun taas termi imperialismi (imperializm) pääosin negatiivisena, liittyen etenkin keskeisenä vihollisena pidettyihin Yhdysvaltoihin. Esiin nousee monta toisiinsa liittyvää teemaa, jotka jaottelen viideksi pääteemaksi. Näistä tarkastelen lähemmin imperiumia ”kaikkien kansojen hyväntekijänä (poliittinen puoli)”, ulkoisen voiman lähteenä (historiallis-geopoliittinen puoli) sekä kollektiivisen subjektin luojana (imperialistis-nationalistinen puoli). Pyrin kontekstualisoimaan diskurssin ja tarkastelemaan tapoja, joilla se ammentaa motiiveja myös historiallis-kulttuurisista tavoista hahmottaa aluetta ja sen asukkaita. Käsittelen myös kansan, kansakunnan, etnoksen ja nationalismin käsitteitä ja sitä, miten ne nousevat neo-eurasianistisessa diskursissa esiin. Imperiaalisen nationalismin (imperskij nacionalizm) käsite auttaa ymmärtämään niitä tapoja, jolla liike tekee sekä pesäeroa nationalismiin että samalla hyödyntää monia nationalistisen diskurssin perusteemoja. Eräs liikkeen diskurssin keskeisistä eroista niin sanottuun nationalismin valtavirtaan on ”kansakunnan (naciâ)” käsitteen vahva negatiivinen konnotaatio. Sen vastakohtana esiin nostetaan vahvasti kansan (narod) käsite. Samalla kuitenkin etnisen venäläisen (russkij) käsitettä käytetään tavallista laajemmin ja kattavammin kuin tavallisesti, ja ennen kaikkea Venäjä nousee imperiumin keskeisimmäksi tekijäksi. Euraasialaiseen imperiumiin liitetyistä positiivistista mielikuvista käsittelen tarkemmin monikansallisuuden ja kansojen kodin ideaa, joka nousee mielestäni huomattavaksi retoriseksi taustaksi kaikessa materiaalissa. Tähän liittyy vahvasti myös saman teeman sivujuonne, eli imperiumin ”vapauttava” rooli. Tulkitsen, että liikkeen imperiumi -diskurssilla on instrumentaalinen luonne: se legitimoi aktivistien vaatimuksia varsinkin entisen Neuvostoliiton alueen suhteen. ”Euraasialaisen kansan” ajatus toimii mahdollisena Euraasiaa yhteisenä tekijänä ”Neuvostokansan” tilalla. Sen taustalla materiaalistani päätellen siintävät kuitenkin enemmänkin Venäjä ja venäläis -spesifit vaateet kuin koko Euraasia. Pohdin myös kansakunnan (nation) hyljeksimisen syitä ja käsitteen sopivuutta Venäjälle, kuten myös venäläisyyden käsitteiden kerrostuneisuutta. Kokonaisuudessaan imperiumi tuli esiin abstraktina, utopistisena ja ”totaalisena” kokonaisuutena.

FTIR-spektroskopia kasviuutteiden analysoinnissa

FTIR-spektroskopia (Fourier-muunnosinfrapunaspektroskopia) on nopea analyysimenetelmä. Fourier-laitteissa interferometrin käyttäminen mahdollistaa koko infrapunataajuusalueen mittaamisen muutamassa sekunnissa. ATR-liitännäisellä varustetun FTIR-spektrometrin käyttö ei edellytä juuri näytteen valmistusta ja siksi menetelmä on käytössä myös helppo. ATR-liitännäinen mahdollistaa myös monien erilaisten näytteiden analysoinnin. Infrapunaspektrin mittaaminen onnistuu myös sellaisista näytteistä, joille perinteisiä näytteenvalmistusmenetelmiä ei voida käyttää. FTIR-spektroskopian avulla saatu tieto yhdistetään usein tilastollisiin monimuuttuja-analyyseihin. Klusterianalyysin avulla voidaan spektreistä saatu tieto ryhmitellä samanlaisuuteen perustuen. Hierarkkisessa klusterianalyysissa objektien välinen samanlaisuus määritetään laskemalla niiden välinen etäisyys. Pääkomponenttianalyysin avulla vähennetään datan ulotteisuutta ja luodaan uusia korreloimattomia pääkomponentteja. Pääkomponenttien tulee säilyttää mahdollisimman suuri määrä alkuperäisen datan variaatiosta. FTIR-spektroskopian ja monimuuttujamenetelmien sovellusmahdollisuuksia on tutkittu paljon. Elintarviketeollisuudessa sen soveltuvuutta esimerkiksi laadun valvontaan on tutkittu. Menetelmää on käytetty myös haihtuvien öljyjen kemiallisten koostumusten tunnistukseen sekä öljykasvien kemotyyppien havaitsemiseen. Tässä tutkimuksessa arvioitiin menetelmän käyttöä suoputken uutenäytteiden luokittelussa. Tutkimuksessa suoputken eri kasvinosien uutenäytteiden FTIR-spektrejä vertailtiin valikoiduista puhdasaineista mitattuihin FTIR-spektreihin. Puhdasaineiden FTIR-spektreistä tunnistettiin niiden tyypilliset absorptiovyöhykkeet. Furanokumariinien spektrien intensiivisten vyöhykkeiden aaltolukualueet valittiin monimuuttuja-analyyseihin. Monimuuttuja-analyysit tehtiin myös IR-spektrin sormenjälkialueelta aaltolukualueelta 1785-725 cm-1. Uutenäytteitä pyrittiin luokittelemaan niiden keräyspaikan ja kumariinipitoisuuden mukaan. Keräyspaikan mukaan ryhmittymistä oli havaittavissa, mikä selittyi vyöhykkeiden aaltolukualueiden mukaan tehdyissä analyyseissa pääosin kumariinipitoisuuksilla. Näissä analyyseissa uutenäytteet pääosin ryhmittyivät ja erottuivat kokonaiskumariinipitoisuuksien mukaan. Myös aaltolukualueen 1785-725 cm-1 analyyseissa havaittiin keräyspaikan mukaan ryhmittymistä, mitä kumariinipitoisuudet eivät kuitenkaan selittäneet. Näihin ryhmittymisiin vaikuttivat mahdollisesti muiden yhdisteiden samanlaiset pitoisuudet näytteissä. Analyyseissa käytettiin myös muita aaltolukualueita, mutta tulokset eivät juuri poikenneet aiemmista. 2. kertaluvun derivaattaspektrien monimuuttuja-analyysit sormenjälkialueelta eivät myöskään muuttaneet tuloksia havaittavasti. Jatkotutkimuksissa nyt käytettyä menetelmää on mahdollista edelleen kehittää esimerkiksi tutkimalla monimuuttuja-analyyseissa 2. kertaluvun derivaattaspektreistä suppeampia, tarkkaan valittuja aaltolukualueita.

Functional Surfaces for Microfluidics in Proteomic Analysis

Microchips for use in biomolecular analysis show a lot of promise for medical diagnostics and biomedical basic research. Among the potential advantages are more sensitive and faster analyses as well as reduced cost and sample consumption. Due to scaling laws, the surface are to volume ratios of microfluidic chips is very high. Because of this, tailoring the surface properties and surface functionalization are very important technical issues for microchip development. This thesis studies two different types of functional surfaces, surfaces for open surface capillary microfluidics and surfaces for surface assisted laser desorption ionization mass spectrometry, and combinations thereof. Open surface capillary microfluidics can be used to transport and control liquid samples on easily accessible open surfaces simply based on surface forces, without any connections to pumps or electrical power sources. Capillary filling of open partially wetting grooves is shown to be possible with certain geometries, aspect ratios and contact angles, and a theoretical model is developed to identify complete channel filling domains, as well as partial filling domains. On the other hand, partially wetting surfaces with triangular microstructures can be used for achieving directional wetting, where the water droplets do not spread isotropically, but instead only spread to a predetermined sector. Furthermore, by patterning completely wetting and superhydrophobic areas on the same surface, complex droplet shapes are achieved, as the water stretches to make contact with the wetting surface, but does not enter into the superhydrophobic domains. Surfaces for surface assisted laser desorption ionization mass spectrometry are developed by applying various active thin film coatings on multiple substrates, in order to separate surface and bulk effects. Clear differences are observed between both surface and substrate layers. The best performance surfaces consisted of amorphous silicon coating and an inorganic-organic hybrid substrate, with nanopillars and nanopores. These surfaces are used for matrix-free ionization of drugs, peptides and proteins, and for some analytes, the detection limits were in the high attomoles. Microfluidics and laser desorption ionization surfaces are combined on a functionalized drying platforms, where the surface is used to control the shape of the deposited analyte droplet, and the shape of the initial analyte droplet affects the dried droplet solute deposition pattern. The deposited droplets can then directly detected by mass spectrometry. Utilizing this approach, results of analyte concentration, splitting and separation are demonstrated.

Biomassan energia-arvon nostaminen sekundäärilämmöllä kuivaamalla

Viime aikoina ilmastonmuutos, fossiilisten polttoaineiden väheneminen ja niiden hinnan nousu ovat lisänneet merkittävästi maailmanlaajuista kiinnostusta uusiutuviin energiavaroihin. Suomessa uusiutuvien energialähteiden käytössä on jo pitkään panostettu metsäteollisuuden sivutuotevirtana tuottamaan puuperäiseen biomassaan, jota metsäteollisuus käyttää energiantuotantoonsa. Metsäteollisuuden jätevesien käsittelyssä syntyy erilaisia lietteitä, jotka joko uusiokäytetään tai hävitetään polttamalla tai sijoittamalla kaatopaikalle. Erityisesti biolietteiden uusiokäyttö on hankalaa ja kaatopaikkasijoitus tulevaisuudessa mahdotonta tai ainakin kustannuksiltaan kohtuutonta. Käytännössä liete hävitetään polttamalla ja kuivaamalla siitä tulee polttoaine. Lietteiden energiakäyttö on järkevin tapa hävittää jäteliete. Lietteiden korkean vesipitoisuuden vuoksi ne tulee kuitenkin kuivata ennen polttoa. Lietteen kuivaaminen sekundäärienergiavirralla eli metsäteollisuusprosesseissa sivutuotteena muodostuvalla ns. hukkalämmöllä lisää lietteen poltosta saatavaa energiamäärää ja korvaa fossiilisten polttoaineiden käyttöä. Tutkimuksen tavoitteena oli selvittää lietteen kuivaukseen optimaalisin kuoren ja lietteen seossuhde eri kuivausparametrejä vaihdellen. Kokeellinen työ aloitettiin rakentamalla energiatekniikan koehalliin laboratoriokokoluokan kiintopetikuivuri, jossa kuivumista tutkittiin puhaltamalla polttoainepedin läpi lämmitettyä ilmaa. Kuivattavina polttoaineina olivat kuoren ja lietteen seos tai pelkkä kuori ja liete erilaisilla massoilla ja erilaisilla prosenttisilla suhteilla ja erilaisissa lämpötiloissa. Kuivumiskäyrien määritys perustui massanmuutokseen. Koelaitteessa olivat anturit lämpötilan mittausta varten, jotta lämpötila saatiin säädettyä ja seurattua kokeen edellyttämällä tavalla. Lämpötilat ja painonmuutokset tallentuivat koetta tehdessä tietokoneelle. Kuivauskokeet osoittivat, että liete-kuori seos kuivuu hyvin kiintopedissä kun lietteen massaosuus seoksessa on korkeintaan 50 %. Lietteen massaosuuden ollessa tätä suurempi kuivaaminen ei enää ole tehokasta, mikä johtuu luultavasti ilman suuresta kanavoitumisesta kuivauspedissä. Kuorta kuivatessa lämpötilan nosto 50 °C:stä 70 °C:een oli huomattavasti tehokkaampaa kuin 70 °C:stä 90 °C:een, ajallisesti ero oli noin kaksinkertainen.

Ratkaiseeko raha? : Tulospalkkiojärjestelmään ja työympäristöön liittyvien kokemusten yhteys esimiesten työtyytyväisyyteen ja työmotivaatioon

The aim of this study was to investigate the relationship between merit pay system and work environment and foremen´s work satisfaction and work motivation. There has been a lot of investigation on rewarding. Less research has been done on previous surveys among the merit pay systems and motivation investigations. According to former surveys, rewarding systems cannot be released from its context. Therefore this survey expanded to deal with work environment. It was also essential to investigate different dimensions of extrinsic and intrinsic motivation and equity of rewarding. Investigation or work motivation and work satisfaction was challenging because both of these concepts have been investigated under quite traditional frame of reference of work motivation theories. In some surveys, the concepts have not been even separated or they have been used even as synonyms. The data were collected with the 193 foremen working in the profit centers of the different chains of the company in the field of retail trade. The questions were: Are the experiences of merit pay system and work environment related to foremen´s work satisfaction and work motivation? Are the backround variables related to foremen´s work satisfaction and work motivation? The data collection was carried out by an electronic inquiry during May 2010. 137 replied from foremen working under merit pay system. The research material was analyzed with PASW-software. Various analyzing methods were used: factor analyses, regression analyses and group of different parametric and non-parametric analyses. In contrast to theoretical framework in the factor analyses work satisfaction and work motivation clustered into the same dimension. As a main result the atmosphere, possibilities to influence and the atmosphere of leading were strongly positively related to foremen´s work satisfaction and work motivation. According to regression analyses these factors were able to explain 55 % of the foremen´s work satisfaction and work motivation. The best explanatory variable was atmosphere. Instead, the backround variables (age, sex, working years, group of profession, education) were not associated with work satisfaction and work motivation.

CSR in forest industry – Case study of reporting and implementation of social responsibility in three international companies

Corporate Social Responsibility (CSR) has become increasingly important topic in forest industries, and other global companies, in recent years. Globalisation, faster information delivery and demand for sustainable development have set new challenges for global companies in their business operations. Also the importance of stakeholder relations, and pressure to become more transparent has increased in the forest industries. Three dimensions of corporate responsibility economic, environmental and social, are often included in the concept of CSR. Global companies mostly claim that these dimensions are equally important. This study analyses CSR in forest industry and has focus on reporting and implementation of social responsibility in three international companies. These case-companies are Stora Enso, SCA and Sappi, and they have different geographical base, product portfolios and therefore present interesting differences about forest industry strategy and CSR. Global Reporting Initiative (GRI) has created the most known and used reporting framework in CSR reporting. GRI Guidelines have made CSR reporting a uniform function, which can also be measured between companies and different sectors. GRI Guidelines have also made it possible to record and control CSR data in the companies. In recent years the use of GRI Guidelines has increased substantially. Typically CSR reporting on economic and environmental responsibility have been systematic in the global companies and often driven by legistlation and other regulations. However the social responsibility has been less regulated and more difficult to compare. Therefore it has previously been often less focused in the CSR reporting of the global companies. The implementation and use of GRI Guidelines have also increased dialogue on social responsibility issues and stakeholder management in global companies. This study analyses the use of GRI´s framework in the forest industry companies´ CSR reporting. This is a qualitative study and the disclosure of data is empricially analysed using content analysis. Content analysis has been selected as a method for this study because it makes it possible to use different sources of information. The data of this study consists of existing academic literature of CSR, sustainability reports of thecase-companies during 2005-2009, and the semi-structured interviews with company representatives. Different sources provide the possibility to look at specific subject from more than one viewpoint. The results of the study show that all case-companies have relatively common themes in their CSR disclosure, and the differences rise mainly from their product-portfolios, and geographic base. Social impacts to local communities, in the CSR of the companies, were mainly dominated by issues concerning creating wealth to the society and impacting communities through creation of work. The comparability of the CSR reporting, and especially social indicators increased significally from 2007 onwards in all case-companies. Even though the companies claim that three dimensions of CSR economic, environmental and social are equally important economic issues and profit improvement still seem to drive most of the operations in the global companies. Many issues that are covered by laws and regulations are still essentially presented as social responsibility in CSR. However often the unwelcome issues in companies like closing operations are covered just briefly, and without adequate explanation. To make social responsibility equally important in the CSR it would demand more emphasis from all the case-companies. A lot of emphasis should be put especially on the detail and extensiveness of the social reponsibility content in the CSR.

Development of foreign direct investment in Finland

During 1990 to 2009, Foreign Direct Investment (FDI henceforth) in Finland has fluctuated greatly. This paper focused on analyzing the overall development and basic characteristics of Foreign Direct Investment in Finland, covering the period from 1990 to present. By comparing FDI in Finland with FDI in other countries, the picture of Finland’s FDI position in the world market is clearer. A lot of statistical data, tables and figures are used to describe the trend of Foreign Direct Investment in Finland. All the data used in this study were obtained from Statistics Finland, UNCTAD, OECD, World Bank and International Labor Office, Investment map website and etc. It is also found that there is a big, long-lasting and increasing imbalance of the inward FDI and outward FDI in Finland, the performance of outward FDI is stronger than the inward FDI in Finland. Finland’s position of FDI in the world is rather modest. And based on existing theories, I tried to analyze the factors that might determine the size of the inflows of FDI in Finland. The econometric model of my thesis is based on time series data ranging from 1990 to 2007. A Log linear regression model is adopted to analyze the impact of each variable. The regression results showed that Labor Cost and Investment in Education have a negative influence on the FDI inflows into Finland. Too high labor cost is the main impediment of FDI in Finland, explaining the relative small size of FDI inflows into Finland. GDP and Economy openness have a significant positive impact on the inflows of FDI into Finland; other variables do not emerge as significant factor in affecting the size of FDI inflows in Finland as expected. Meanwhile, the impacts of the most recent financial and economic crisis on FDI in the world and in Finland are discussed as well. FDI inflows worldwide and in Finland have suffered from a big setback from the 2008 global crisis. The economic crisis has undoubtedly significant negative influence on the FDI flows in the world and in Finland. Nevertheless, apart from the negative impact, the crisis itself also brings in chances for policymakers to implement more efficient policies in order to create a pro-business and pro-investment climate for the recovery of FDI inflows. . The correspondent policies and measures aiming to accelerate the recovery of the falling FDI were discussed correspondently.

Tax havens and their impacts on the non-haven countries

Tax havens have attracted increasing attention from the authorities of non-haven countries. The financial crisis exacerbates the negative attitude to tax havens. Offshore zones are now under strong pressure from the international, both financial and political institutions. Thus, the thesis will focus on the current problem of the modern economy, namely tax havens and their impact on the non-haven countries. This thesis will be based on the several articles, in particular “Tax Competition With Parasitic Tax Havens” by Joel Slemrod and John D. Wilson (University of Michigan, 2009) and “Do Havens Divert Economic Activity” by James R. Hines Jr., C. Fritz Foley and Mihir A. Desai (Ross School of Business, 2005). This paper provides two completely different and contradictory viewpoints on the problem of coexisting tax havens and non-haven countries. There are two models, examined in this work, present two important researches. The first one will be concentrated on the positive effect from tax havens whereas the last model will be focused on the completely negative effect from offshore jurisdictions. The first model gives us a good explanation and proof of its statement why tax havens can positively influence on nearby high-tax countries. It describes that the existence of offshore jurisdictions can stimulate the growth of operations and facilitates economic activity in non-haven countries. In contrast to above mentioned, the model with quite opposite view was presented. This economic model and its analysis confirms the undesirability of the existence of offshore areas. Taking into consideration, that the jurisdictions choose their optimal policy, the elimination of offshores will have positive impact on the rest of countries. The model proofs the statement that full or partial elimination of tax havens raises the equilibrium level of the public good and increases country welfare. According to the following study, it can be concluded that both of the models provide telling arguments to prove their assertions. Thereby both of these points of view have their right to exist. Nevertheless, the ongoing debate concerning this issue still will raise a lot of questions.

Perunan Y-viruksen testaaminen korkeassa happi-hiilidioksidipitoisuudessa idätetyistä perunoista

Perunalla (Solanum tuberosum L.) tällä hetkellä maailmanlaajuisesti eniten sato- ja laatutappioita aiheuttaa perunan Y-virus (PVY). Vaikka pelkän Y-viruksen aiheuttamaa satotappiota on vaikea mitata, on sen arvioitu olevan 20-80 %. Viruksen tärkein leviämistapa on viroottinen siemenperuna. Korkealaatuinen siemenperuna on edellytys ruoka-, ruokateollisuus- ja tärkkelysperunan tuotannolle. Kasvuston silmämääräinen tarkastelu aliarvioi yleensä Y-viruksen esiintyvyyttä. Laboratoriotestauksen avulla saadaan tarkempi tieto pellolta korjatun sadon saastunta-asteesta. Ongelmana Y-viruksen testaamisessa on, että sitä ei havaita dormanssissa olevista perunoista otetuista näytteistä yhtä luotettavasti kuin jo dormanssin ohittaneista perunoista testattaessa. Erilaisia menetelmiä kemikaaleista (Rindite, bromietaani) kasvihormoneihin (mm. gibberelliinihappo) ja varastointiolosuhteiden muutoksiin (kylmä- ja lämpökäsittely) on kokeiltu perunan dormanssin purkamiseen, mutta tulokset ovat olleet vaihtelevia. Tässä tutkielmassa perunan dormanssin purkamiseen käytettiin happi-hiilidioksidikäsittelyä (O2 40 % ja CO2 20 %) eripituisina käsittelyaikoina. Tarkoituksena oli selvittää, vaikuttaako käsittely perunan itämiseen ja dormanssin luontaista aikaisempaan purkautumiseen tai Y-viruksen havaitsemiseen. Lisäksi haluttiin selvittää, voiko Y-viruksen määrittämisen ELISA-testillä (Enzyme Linked Immunosorbent Assay) tehdä yhtä luotettavasti myös muista kasvinosista (mukula, itu), kuin tällä hetkellä yleisesti käytetystä perunan lehdestä. Idätyskäsittelyn vaikutuksista dormanssin purkautumiseen saatiin vaihtelevia, eikä kovinkaan yleistettäviä tuloksia. Käsittelyn ei myöskään havaittu vaikuttavan PYY-viroottisuuden havaitsemiseen eri näytemateriaaleilla testattaessa. Kun eri kasvinosien toimivuutta testissä vertailtiin, mukulamateriaalin todettiin aliarvioivan PVY-viroottisuutta kaikissa kokeissa. Myös itumateriaali aliarvioi pääsääntöisesti PVY-viroottisuutta ELISA:lla tehdyissä määrityksissä. Luotettavin testimateriaali oli perunan lehti.

Production process of Scots pine.

The accompanying collective research report is the result of the research project in 1986­90 between The Finnish Academy and the former Soviet Academy of Sciences. The project was organized around common field work in Finland and in the former Soviet Union and theoretical analyses of tree growth determining processes. Based on theoretical analyses, dynamic stand growth models were made and their parameters were determined utilizing the field results. Annual cycle affects the tree growth. Our theoretical approach was based on adaptation to local climate conditions from Lapland to South Russia. The initiation of growth was described as a simple low and high temperature accumulation driven model. Linking the theoretical model with long term temperature data allowed us to analyze what type of temperature response produced favorable outcome in different climates. Initiation of growth consumes the carbohydrate reserves in plants. We measured the dynamics of insoluble and soluble sugars in the very northern and Karelian conditions. Clear cyclical pattern was observed but the differences between locations were surprisingly small. Analysis of field measurements of CO2 exchange showed that irradiance is the dominating factor causing variation in photosynthetic rate in natural conditions during summer. The effect of other factors is so small that they can be omitted without any considerable loss of accuracy. A special experiment carried out in Hyytiälä showed that the needle living space, defined as the ratio between the shoot cylindric volume and needle surface area, correlates with the shoot photosynthesis. The penetration of irradiance into Scots pine canopy is a complicated phenomenon because of the movement of the sun on the sky and the complicated structure of branches and needles. A moderately simple but balanced forest radiation regime submodel was constructed. It consists of the tree crown and forest structure, the gap probability calculation and the consideration of spatial and temporal variation of radiation inside the forest. The common field excursions in different geographical regions resulted in a lot of experimental data of regularities of woody structures. The water transport seems to be a good common factor to analyse these properties of tree structure. There are evident regressions between cross-sectional areas measured at different locations along the water pathway from fine roots to needles. The observed regressions have clear geographical trends. For example, the same cross-sectional area can support three times higher needle mass in South Russia than in Lapland. Geographical trends can also be seen in shoot and needle structure. Analysis of data published by several Russian authors show, that one ton of needles transpire 42 ton of water a year. This annual amount of transpiration seems to be independent of geographical location, year and site conditions. The produced theoretical and experimental material is utilised in the development of stand growth model that describes the growth and development of Scots pine stands in Finland and the former Soviet Union. The core of the model is carbon and nutrient balances. This means that carbon obtained in photosynthesis is consumed for growth and maintenance and nutrients are taken according to the metabolic needs. The annual photosynthetic production by trees in the stand is determined as a function of irradiance and shading during the active period. The utilisation of the annual photosynthetic production to the growth of different components of trees is based on structural regularities. Since the fundamental metabolic processes are the same in all locations the same growth model structure can be applied in the large range of Scots pine. The annual photosynthetic production and structural regularities determining the allocation of resources have geographical features. The common field measurements enable the application of the model to the analysis of growth and development of stands growing on the five locations of experiments. The model enables the analysis of geographical differences in the growth of Scots pine. For example, the annual photosynthetic production of a 100-year-old stand at Voronez is 3.5 times higher than in Lapland. The share consumed to needle growth (30 %) and to growth of branches (5 %) seems to be the same in all locations. In contrast, the share of fine roots is decreasing when moving from north to south. It is 20 % in Lapland, 15 % in Hyytiälä Central Finland and Kentjärvi Karelia and 15 % in Voronez South Russia. The stem masses (115­113 ton/ha) are rather similar in Hyytiälä, Kentjärvi and Voronez, but rather low (50 ton/ha) in Lapland. In Voronez the height of the trees reach 29 m being in Hyytiälä and Kentjärvi 22 m and in Lapland only 14 m. The present approach enables utilization of structural and functional knowledge, gained in places of intensive research, in the analysis of growth and development of any stand. This opens new possibilities for growth research and also for applications in forestry practice.