55 resultados para Late nitrogen fertilization


Relevância:

20.00% 20.00%

Publicador:

Resumo:

In agricultural systems which rely on organic sources of nitrogen (N), of which the primary source is biological N fixation (BNF), it is extremely important to use N as efficiently as possible with minimal losses to the environment. The amount of N through BNF should be maximised and the availability of the residual N after legumes should be synchronised to the subsequent plant needs in the crop rotation. Six field experiments in three locations in Finland were conducted in 1994-2006 to determine the productivity and amount of BNF in red clover-grass leys of different ages. The residual effects of the leys for subsequent cereals as well as the N leaching risk were studied by field measurements and by simulation using the CoupModel. N use efficiency (NUE) and N balances were also calculated. The yields of red clover-grass leys were highest in the two-year-old leys (6 700 kg ha-1) under study, but the differences between 2- and 3-year old leys were not high in most cases. BNF (90 kg ha-1 in harvested biomass) correlated strongly with red clover dry matter yield, as the proportion of red clover N derived from the atmosphere (> 85%) was high in our conditions of organically farmed field with low soil mineral N. A red clover content of over 40% in dry matter is targeted to avoid negative N-balances and to gain N for the subsequent crop. Surprisingly, the leys had no significant effect on the yields and N uptake of the two subsequent cereals (winter rye or spring wheat, followed by spring oats). On the other hand, yield and C:N of leys, as well as BNF-N and total-N incorporated into the soil influenced on subsequent cereal yields. NUE of cereals from incorporated ley crop residues was rather high, varying from 30% to 80% (mean 48%). The mineral N content of soil in the profile of 0-90 cm was low, mainly 15-30 kg ha-1. Simulation of N dynamics by CoupModel functioned satisfactorily and is considered a useful tool to estimate N flows in cropping systems relying on organic N sources. Understanding the long-term influence of cultivation history and soil properties on N dynamics remains to be a challenge to further research.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The commodity plastics that are used in our everyday lives are based on polyolefin resins and they find wide variety of applications in several areas. Most of the production is carried out in catalyzed low pressure processes. As a consequence polymerization of ethene and α-olefins has been one of the focus areas for catalyst research both in industry and academia. Enormous amount of effort have been dedicated to fine tune the processes and to obtain better control of the polymerization and to produce tailored polymer structures The literature review of the thesis concentrates on the use of Group IV metal complexes as catalysts for polymerization of ethene and branched α-olefins. More precisely the review is focused on the use of complexes bearing [O,O] and [O,N] type ligands which have gained considerable interest. Effects of the ligand framework as well as mechanical and fluxional behaviour of the complexes are discussed. The experimental part consists mainly of development of new Group IV metal complexes bearing [O,O] and [O,N] ligands and their use as catalysts precursors in ethene polymerization. Part of the experimental work deals with usage of high-throughput techniques in tailoring properties of new polymer materials which are synthesized using Group IV complexes as catalysts. It is known that the by changing the steric and electronic properties of the ligand framework it is possible to fine tune the catalyst and to gain control over the polymerization reaction. This is why in this thesis the complex structures were designed so that the ligand frameworks could be fairly easily modified. All together 14 complexes were synthesised and used as catalysts in ethene polymerizations. It was found that the ligand framework did have an impact within the studied catalyst families. The activities of the catalysts were affected by the changes in complex structure and also effects on the produced polymers were observed: molecular weights and molecular weight distributions were depended on the used catalyst structure. Some catalysts also produced bi- or multi-modal polymers. During last decade high-throughput techniques developed in pharmaceutical industries have been adopted into polyolefin research in order to speed-up and optimize the catalyst candidates. These methods can now be regarded as established method suitable for both academia and industry alike. These high-throughput techniques were used in tailoring poly(4-methyl-1-pentene) polymers which were synthesized using Group IV metal complexes as catalysts. This work done in this thesis represents the first successful example where the high-throughput synthesis techniques are combined with high-throughput mechanical testing techniques to speed-up the discovery process for new polymer materials.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The dissertation focuses on the recognition of the problems of uneven regional development in Finland in the 1950s, and the way the idea of controlling this development was introduced to Finnish politics. Since it is often stated that Finnish regional policy only began in the mid-1960s, the period at hand is considered to fall in the time before regional policy. However, various ideas, plans and projects of regional development as well as different aims of development were brought forward and discussed already in the 1950s. These give an interesting perspective to the ideas of later regional development. In the 1950s, many Finnish politicians became more conscious of the unavoidable societal change. The need for overall modernisation of the society made it reasonable to expect a growing level of unemployment and eagerness to migration. The uneven distribution of well-being was also feared to cause discontent and political changes. International experience proved interfering in the regional development possible when using the argument of public interest ; the measures taken increased the level of well-being, helped sustain societal balance, and supported national economy. Many of the development projects of the 1950s focused on Northern Finland, the natural resources of which were considered an important reserve and the political climate of which was regarded unstable. After the late 1940s, regional development was discussed frequently both on the national and the regional level. Direct and indirect support was given to less developed areas and the government outlined thorough investigations in order to relieve the regional problem. Towards the end of the decade, the measures taken were already often connected to the idea of equality. In the 1950s the conflicts within and between the largest Finnish political parties significantly affected the decisions of regional development. There are three case studies in this qualitative research based on the narrative method. The case studies clarify the characteristics of the 1950s regional development. In the first one, the representatives of the northern region and the state first discuss the location of a state-run nitrogen fertilizer factory and later the location of a new university. In the second, the aims and perspectives of private entrepreneurs and the state collide due to ideas of statist industrialisation projects and later due to an idea of a tax relief targeting northern industry. In the third case, the main role is given to the changing rural areas, in relation to which societal development and urbanisation were often measured. The regional development of the 1950s laid groundwork for the new, more established regional policy. The early problem solving actions were aimed both at the prevailing situation and the future and thus showed the way for the upcoming actions. Regional development policy existed already before regional policy.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nisäkkäiden levinneisyyteen, niiden morfologisiin ja ekologisiin piirteisiin vaikuttavat ympäristön sekä lyhyet että pitkäkestoiset muutokset, etenkin ilmaston ja kasvillisuuden vaihtelut. Työssä tutkittiin nisäkkäiden sopeutumista ilmastonmuutoksiin Euraasiassa viimeisen 24 miljoonan vuoden aikana. Tutkimuksessa keskityttiin varsinkin viimeiseen kahteen miljoonaan vuoteen, jonka aikana ilmasto muuttui voimakkaasti ja ihmisen toiminta alkoi tulla merkittäväksi. Tämän takia on usein vaikea erottaa, kummasta em. seikasta jonkin nisäkäslajin sukupuutto tai häviäminen alueelta johtui. Aineistona käytettiin laajaa venäjänkielistä kirjallisuutta, josta löytyvät tiedot ovat kääntämättöminä jääneet aiemmin länsimaisen tutkimuksen ulkopuolelle. Työssä käytettiin myös NOW-tietokantaa, jossa on fossiilisten nisäkkäiden löytöpaikat sekä niiden iät.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work develops methods to account for shoot structure in models of coniferous canopy radiative transfer. Shoot structure, as it varies along the light gradient inside canopy, affects the efficiency of light interception per unit needle area, foliage biomass, or foliage nitrogen. The clumping of needles in the shoot volume also causes a notable amount of multiple scattering of light within coniferous shoots. The effect of shoot structure on light interception is treated in the context of canopy level photosynthesis and resource use models, and the phenomenon of within-shoot multiple scattering in the context of physical canopy reflectance models for remote sensing purposes. Light interception. A method for estimating the amount of PAR (Photosynthetically Active Radiation) intercepted by a conifer shoot is presented. The method combines modelling of the directional distribution of radiation above canopy, fish-eye photographs taken at shoot locations to measure canopy gap fraction, and geometrical measurements of shoot orientation and structure. Data on light availability, shoot and needle structure and nitrogen content has been collected from canopies of Pacific silver fir (Abies amabilis (Dougl.) Forbes) and Norway spruce (Picea abies (L.) Karst.). Shoot structure acclimated to light gradient inside canopy so that more shaded shoots have better light interception efficiency. Light interception efficiency of shoots varied about two-fold per needle area, about four-fold per needle dry mass, and about five-fold per nitrogen content. Comparison of fertilized and control stands of Norway spruce indicated that light interception efficiency is not greatly affected by fertilization. Light scattering. Structure of coniferous shoots gives rise to multiple scattering of light between the needles of the shoot. Using geometric models of shoots, multiple scattering was studied by photon tracing simulations. Based on simulation results, the dependence of the scattering coefficient of shoot from the scattering coefficient of needles is shown to follow a simple one-parameter model. The single parameter, termed the recollision probability, describes the level of clumping of the needles in the shoot, is wavelength independent, and can be connected to previously used clumping indices. By using the recollision probability to correct for the within-shoot multiple scattering, canopy radiative transfer models which have used leaves as basic elements can use shoots as basic elements, and thus be applied for coniferous forests. Preliminary testing of this approach seems to explain, at least partially, why coniferous forests appear darker than broadleaved forests in satellite data.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The tackling of coastal eutrophication requires water protection measures based on status assessments of water quality. The main purpose of this thesis was to evaluate whether it is possible both scientifically and within the terms of the European Union Water Framework Directive (WFD) to assess the status of coastal marine waters reliably by using phytoplankton biomass (ww) and chlorophyll a (Chl) as indicators of eutrophication in Finnish coastal waters. Empirical approaches were used to study whether the criteria, established for determining an indicator, are fulfilled. The first criterion (i) was that an indicator should respond to anthropogenic stresses in a predictable manner and has low variability in its response. Summertime Chl could be predicted accurately by nutrient concentrations, but not from the external annual loads alone, because of the rapid affect of primary production and sedimentation close to the loading sources in summer. The most accurate predictions were achieved in the Archipelago Sea, where total phosphorus (TP) and total nitrogen (TN) alone accounted for 87% and 78% of the variation in Chl, respectively. In river estuaries, the TP mass-balance regression model predicted Chl most accurately when nutrients originated from point-sources, whereas land-use regression models were most accurate in cases when nutrients originated mainly from diffuse sources. The inclusion of morphometry (e.g. mean depth) into nutrient models improved accuracy of the predictions. The second criterion (ii) was associated with the WFD. It requires that an indicator should have type-specific reference conditions, which are defined as "conditions where the values of the biological quality elements are at high ecological status". In establishing reference conditions, the empirical approach could only be used in the outer coastal water types, where historical observations of Secchi depth of the early 1900s are available. The most accurate prediction was achieved in the Quark. In the inner coastal water types, reference Chl, estimated from present monitoring data, are imprecise - not only because of the less accurate estimation method but also because the intrinsic characteristics, described for instance by morphometry, vary considerably inside these extensive inner coastal types. As for phytoplankton biomass, the reference values were less accurate than in the case of Chl, because it was possible to estimate reference conditions for biomass only by using the reconstructed Chl values, not the historical Secchi observations. An paleoecological approach was also applied to estimate annual average reference conditions for Chl. In Laajalahti, an urban embayment off Helsinki, strongly loaded by municipal waste waters in the 1960s and 1970s, reference conditions prevailed in the mid- and late 1800s. The recovery of the bay from pollution has been delayed as a consequence of benthic release of nutrients. Laajalahti will probably not achieve the good quality objectives of the WFD on time.    The third criterion (iii) was associated with coastal management including the resources it has available. Analyses of Chl are cheap and fast to carry out compared to the analyses of phytoplankton biomass and species composition; the fact which has an effect on number of samples to be taken and thereby on the reliability of assessments. However, analyses on phytoplankton biomass and species composition provide more metrics for ecological classification, the metrics which reveal various aspects of eutrophication contrary to what Chl alone does.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Oxysterol binding protein (OSBP) homologues have been found in eukaryotic organisms ranging from yeast to humans. These evolutionary conserved proteins have in common the presence of an OSBP-related domain (ORD) which contains the fully conserved EQVSHHPP sequence motif. The ORD forms a barrel structure that binds sterols in its interior. Other domains and sequence elements found in OSBP-homologues include pleckstrin homology domains, ankyrin repeats and two phenylalanines in an acidic tract (FFAT) motifs, which target the proteins to distinct subcellular compartments. OSBP homologues have been implicated in a wide range of intracellular processes, including vesicle trafficking, lipid metabolism and cell signaling, but little is known about the functional mechanisms of these proteins. The human family of OSBP homologues consists of twelve OSBP-related proteins (ORP). This thesis work is focused on one of the family members, ORP1, of which two variants were found to be expressed tissue-specifically in humans. The shorter variant, ORP1S contains an ORD only. The N-terminally extended variant, ORP1L, comprises a pleckstrin homology domain and three ankyrin repeats in addition to the ORD. The two ORP1 variants differ in intracellular localization. ORP1S is cytosolic, while the ankyrin repeat region of ORP1L targets the protein to late endosomes/lysosomes. This part of ORP1L also has profound effects on late endosomal morphology, inducing perinuclear clustering of late endosomes. A central aim of this study was to identify molecular interactions of ORP1L on late endosomes. The morphological changes of late endosomes induced by overexpressed ORP1L implies involvement of small Rab GTPases, regulators of organelle motility, tethering, docking and/or fusion, in generation of the phenotype. A direct interaction was demonstrated between ORP1L and active Rab7. ORP1L prolongs the active state of Rab7 by stabilizing its GTP-bound form. The clustering of late endosomes/lysosomes was also shown to be linked to the minus end-directed microtubule-based dynein-dynactin motor complex through the ankyrin repeat region of ORP1L. ORP1L, Rab7 and the Rab7-interacting lysosomal protein (RILP) were found to be part of the same effector complex recruiting the dynein-dynactin complex to late endosomes, thereby promoting minus end-directed movement. The proteins were found to be physically close to each other on late endosomes and RILP was found to stabilize the ORP1L-Rab7 interaction. It is possible that ORP1L and RILP bind to each other through their C-terminal and N-terminal regions, respectively, when they are bridged by Rab7. With the results of this study we have been able to place a member of the uncharacterized OSBP-family, ORP1L, in the endocytic pathway, where it regulates motility and possibly fusion of late endosomes through interaction with the small GTPase Rab7.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The object of this study is a tailless internal membrane-containing bacteriophage PRD1. It has a dsDNA genome with covalently bound terminal proteins required for replication. The uniqueness of the structure makes this phage a desirable object of research. PRD1 has been studied for some 30 years during which time a lot of information has accumulated on its structure and life-cycle. The two least characterised steps of the PRD1 life-cycle, the genome packaging and virus release are investigated here. PRD1 shares the main principles of virion assembly (DNA packaging in particular) and host cell lysis with other dsDNA bacteriophages. However, this phage has some fascinating individual peculiarities, such as DNA packaging into a membrane vesicle inside the capsid, absence of apparent portal protein, holin inhibitor and procapsid expansion. In the course of this study we have identified the components of the DNA packaging vertex of the capsid, and determined the function of protein P6 in packaging. We managed to purify the procapsids for an in vitro packaging system, optimise the reaction and significantly increase its efficiency. We developed a new method to determine DNA translocation and were able to quantify the efficiency and the rate of packaging. A model for PRD1 DNA packaging was also proposed. Another part of this study covers the lysis of the host cell. As other dsDNA bacteriophages PRD1 has been proposed to utilise a two-component lysis system. The existence of this lysis system in PRD1 has been proven by experiments using recombinant proteins and the multi-step nature of the lysis process has been established.