Metsäpirulainen : Liikemies Erik Johan Längman (1799-1863) talousjärjestelmän murroksessa

The Forest devil. Businessman Erik Johan Längman (1799 1863) in the transition of economic system In Finnish historiography, Erik Johan Längman (1799-1863) bears a bad reputation of his own level: a mean, profit-seeking businessman who did not care too much about methods in his operations. Although little known, Längman has been praised as one of the pioneers of modern industry in the Grand Duchy of Finland, which belonged to the Russian Empire. From the mid 1830s Längman owned iron mill and several sawmills around the country. The growing demand of the markets in the 1830s, especially in Great Britain, marked a strong stimulus to Finnish lumber industry. At the same time claims for stricter rule over the sawmill industry were raised by high officials. The momentum of the conflict, the Forest Act of 1851, brought an end to illegal overproduction. In this biography, particular emphasis is laid on the entrepreneurial behaviour of Längman, but also on the effect the entrepreneurs had on the Crown s policies. On the other hand, how did the limitations imposed by the Crown guide the actions of the sawmill owners? The solutions adopted by the sawmill owners and the manoeuvring of the government are in a constant dialogue in this study. The Finnish sawmill industry experienced a major change in its techniques and methods of acquiring timber during the 1830s. Längman particularly, with his acquisition organisation, was able to find and reach faraway forests with unexpected results. The official regulating system with its strict producing quotas couldn t follow the changes. When the battle against the sawmill industry really started on, in 1840, it didn t happen for the benefit of iron industry, as argued previously, but to save Crown forests from depletion. After the mid 1840s Längman and the leader of the Finnish nationalistic movement, J. V. Snellman questioned the rationality of the entire regulation system and in doing so they also posed a threat against the aristocratic power. The influential but now also badly provoked chairman of the economic division of senate, Lars Gabriel von Haartman, accused the sawmill-owners harder than ever and took the advantage of the reactionary spirit of imperial Russia to launch the state forest administration. Längman circumvented the conditions of privileges, felled Crown forests illegally and accusations were brought against him for destroying his competitors. The repeated conflicts spoke primarily about a superior business idea and organisational ability. Although Längman spent his last years mostly abroad he still had interests in Finnish timber business when the liberation of sawmill-industry was established, in 1861. Surprisingly, the antagonism around the Crown forests continued, probably even more heated.

A capability-based view of organisational renewal : Combining opportunity- and advantage-seeking growth in large, established European and North American wood-industry companies

The purpose of this study was to extend understanding of how large firms pursuing sustained and profitable growth manage organisational renewal. A multiple-case study was conducted in 27 North American and European wood-industry companies, of which 11 were chosen for closer study. The study combined the organisational-capabilities approach to strategic management with corporate-entrepreneurship thinking. It charted the further development of an identification and classification system for capabilities comprising three dimensions: (i) the dynamism between firm-specific and industry-significant capabilities, (ii) hierarchies of capabilities and capability portfolios, and (iii) their internal structure. Capability building was analysed in the context of the organisational design, the technological systems and the type of resource-bundling process (creating new vs. entrenching existing capabilities). The thesis describes the current capability portfolios and the organisational changes in the case companies. It also clarifies the mechanisms through which companies can influence the balance between knowledge search and the efficiency of knowledge transfer and integration in their daily business activities, and consequently the diversity of their capability portfolio and the breadth and novelty of their product/service range. The largest wood-industry companies of today must develop a seemingly dual strategic focus: they have to combine leading-edge, innovative solutions with cost-efficient, large-scale production. The use of modern technology in production was no longer a primary source of competitiveness in the case companies, but rather belonged to the portfolio of basic capabilities. Knowledge and information management had become an industry imperative, on a par with cost effectiveness. Yet, during the period of this research, the case companies were better in supporting growth in volume of the existing activity than growth through new economic activities. Customer-driven, incremental innovation was preferred over firm-driven innovation through experimentation. The three main constraints on organisational renewal were the lack of slack resources, the aim for lean, centralised designs, and the inward-bound communication climate.

Young people's perceptions of the wood products industry : a relational view

The basis for this study was in poor attractiveness of the wood products industry among young people as a field to study and work in. The purpose was to produce new information of how to improve the relationship between young people and the wood products industry in order to better attract young people with different relational orientation. A survey was conducted among students of comprehensive schools and students of wood industry at vocational schools selected by systematic cluster sampling. The final sample consisted of 613 students. The study combined the theories and concepts of relationships, communication and trust of several disciplines. In addition, it applied theories of relationship marketing, stakeholders, publics, involvement and concepts of reputation and values. It studied the central relational elements in the form of antecedents, relationship state and its consequences. The study examined, how young people with different background and level of interest perceive wood industry as a field to study and work in from relational point of view, what are the central deficiencies in perceived relational elements and what are the public relations activities enhancing the relationship between wood industry and young people with less and high interest in the sector. The results indicate poor visibility of the wood industry among young people: unfamiliarity with the industry and unawareness of the opportunities to study in the field. It appeared that instead of increasing only information sharing, interactive communication in different forms is needed. The study also suggests that behaviors of the industry sector advancing perceived trustworthiness are of crucial importance. Moreover, the wood industry needs to pay attention to its behaviors and communication also among other stakeholder groups, especially the media, as reputation plays an important role in building up trust and satisfaction between young people and the sector. Finally, the less and highly interested young people were found to assess the relationship partly through different relational elements. In order to develop the relationship with highly interested young people they should be regarded clearly as future employees of the wood industry through activities affirming that they are desired and valued employees in the sector. Further, openness of information disclosure, whether concerning current situation or future prospects, seems to increase credibility and attractiveness of the wood industry. Highly interested young people were also found to appreciate socially responsible activities. The less interested young people seem to be insecure about the reliability of the wood industry as an employer, as well as, its ability and interest to invest in young people s skills. In addition,involvement in issues relevant for young people was found crucial in enhancing the relationship with the less interested young people.The conclusions of the study provide tools for enhancing the attractiveness of the wood industry among young people not only to the industry itself, but also to its advocates, teachers and student counselors of comprehensive and vocational schools, authorities and policy makers.

Structural characteristics affecting functions of two actin regulating proteins

Structural biology is a branch of science that concentrates on the relationship between the structure and function of biological macromolecules. The prevalence of a large number of three dimensional structures offers effective tools for bio-scientists to understand the living world. Actin is the most abundant cellular protein and one of its main functions is to produce movement in living cells. Actin forms filaments that are dynamic and which are regulated by a number of different proteins. A class of these regulatory proteins contains actin depolymerizing factor homology (ADF-H) domains. These directly interact with actin through their ADF-H domains. Although ADF-H domains possess very similar three dimensional structures to one another, they vary in their functional properties. One example of this is the ability to bind to actin monomers or filaments. During the work for this thesis two structures of ADF-H domains were solved by nuclear magnetic resonance spectroscopy (NMR). The elucidated structures help us understand the binding specificities of the ADF-H family members.

Regulating Food Consumption : Studies of change and variation in Europe

The role of people as buyers and eaters of food has changed significantly. From being protected by a paternalistic welfare state, people appear to be accorded more freedom and responsibility as individuals, where attention is redirected from the state towards market relations. Many have asserted that these changes are accompanied by fragmentation, individualisation, and privatisation, leading to individual uncertainty and lack of confidence. But empirical observations do not always confirm this, distrust is not necessarily growing and while responsibilities may change, the state still plays an active role. This dissertation explores changing relationships between states and markets, on the one hand, and ordinary people in their capacities as consumers and citizens, on the other. Do we see the emergence of new forms of regulation of food consumption? If so, what is the scope and what are the characteristics? Theories of regulation addressing questions about individualisation and self-governance are combined with a conceptualisation of consumption as processes of institutionalisation, involving daily routines, the division of labour between production and consumption, and the institutional field in which consumption is embedded. The analyses focus on the involvement of the state, food producers and scientific, first of all nutritional, expertise in regulating consumption, and on popular responses. Two periods come out as important, first when the ideas of “designing the good life” emerged, giving the state a very particular role in regulating food consumption, and, second, when this “designing” is replaced by ideas of choice and individual responsibility. One might say that “consumer choice” has become a mode of regulation. I use mainly historical studies from Norway to analyse the shifting role of the state in regulating food consumption, complemented with population surveys from six European countries to study how modernisation processes are associated with trust. The studies find that changing regulation is not only a question of societal or state vs individual responsibilities. Degrees of organisation and formalisation are important as well. While increasing organisation may represent discipline and abuses of power (including exploitation of consumer loyalty), organisation can also, to the consumer, provide higher predictability, systems to deal with malfeasance, and efficiency which may provide conditions for acting. The welfare state and the neo-liberal state have very different types of solutions. The welfare state solution is based on (national) egalitarianism, paternalism and discipline (of the market as well as households). Such solutions are still prominent in Norway. Individualisation and self-regulation may represent a regulatory response not only to a declining legitimacy of this kind of interventionism, but also increasing organisational complexity. This is reflected in large-scale re-regulation of markets as well as in relationships with households and consumers. Individualisation of responsibility is to the consumer not a matter of the number of choices that are presented on the shelves, but how choice as a form of consumer based involvement is institutionalised. It is recognition of people as “end-consumers”, as social actors, with systems of empowerment politically as well as via the provisioning system. ‘Consumer choice’ as a regulatory strategy includes not only communicative efforts to make people into “choosing consumers”, but also the provision of institutions which recognise consumer interests and agency. When this is lacking we find distrust as representing powerlessness. Individual responsibility-taking represents agency and is not always a matter of loyal support to shared goals, but involves protest and creativity. More informal (‘communitarian’) innovations may be an indication of that, where self-realisation is intimately combined with responsibility for social problems. But as solutions to counteract existing imbalances of power in the food market the impacts of such initiatives are probably more as part of consumer mobilisation and politicisation than as alternative provisioning.

Role and function of nonmuscle alpha-actinin-1 and -4 in regulating distinct subcategories of actin stress fibers in mammalian cells

Actin stress fibers are dynamic structures in the cytoskeleton, which respond to mechanical stimuli and affect cell motility, adhesion and invasion of cancer cells. In nonmuscle cells, stress fibers have been subcategorized to three distinct stress fiber types: dorsal and ventral stress fibers and transverse arcs. These stress fibers are dissimilar in their subcellular localization, connection to substratum as well as in their dynamics and assembly mechanisms. Still uncharacterized is how they differ in their function and molecular composition. Here, I have studied involvement of nonmuscle alpha-actinin-1 and -4 in regulating distinct stress fibers as well as their localization and function in human U2OS osteosarcoma cells. Except for the correlation of upregulation of alpha-actinin-4 in invasive cancer types very little is known about whether these two actinins are redundant or have specific roles. The availability of highly specific alpha-actinin-1 antibody generated in the lab, revealed localization of alpha-actinin-1 along all three categories of stress fibers while alphaactinin-4 was detected at cell edge, distal ends of stress fibers as well as perinuclear regions. Strikingly, by utilizing RNAi-mediated gene silencing of alpha-actinin-1 resulted in specific loss of dorsal stress fibers and relocalization of alpha-actinin-4 to remaining transverse arcs and ventral stress fibers. Unexpectedly, aberrant migration was not detected in cells lacking alpha-actinin-1 even though focal adhesions were significantly smaller and fewer. Whereas, silencing of alpha-actinin-4 noticeably affected overall cell migration. In summary, as part of my master thesis study I have been able to demonstrate distinct localization and functional patterns for both alpha-actinin-1 and -4. I have identified alpha-actinin-1 to be a selective dorsal stress fiber crosslinking protein as well as to be required for focal adhesion maturation, while alpha-actinin-4 was demonstrated to be fundamental for cell migration.

Adoption processes for EDM, EDI and BIM technologies in the construction industry

Three strategically important uses of IT in the construction industry are the storage and management of project documents on webservers (EDM), the electronic handling of orders and invoices between companies (EDI) and the use of 3-D models including non-geometrical attributes for integrated design and construction (BIM). In a broad longitudinal survey study of IT use in the Swedish Construction Industry the extent of use of these techniques was measured in 1998, 2000 and 2007. The results showed that EDM and EDI are currently already well-established techniques whereas BIM, although it promises the biggest potential benefits to the industry, only seems to be at the beginning of adoption. In a follow-up to the quantitative studies, the factors affecting the decisions to implement EDM, EDI and BIM as well as the actual adoption processes, were studied using semi-structured interviews with practitioners. The theoretical basis for the interview studies was informed by theoretical frameworks from IT-adoption theory, where in particular the UTAUT model has provided the main basis for the analyses presented here. The results showed that the decisions to take the above technologies into use are made on three differ- ent levels: the individual level, the organizational level in the form of a company, and the organiza- tional level in the form of a project. The different patterns in adoption can to some part be explained by where the decisions are mainly taken. EDM is driven from the organisation/project level, EDI mainly from the organisation/company level, and BIM is driven by individuals pioneering the technique.

Building Information Modelling – Experts´ Views on Standardisation and Industry Deployment

The goal of the single building information model has existed for at least thirty years and various standards have been published leading up to the ten-year development of the Industry Foundation Classes. These have been initiatives from researchers, software developers and standards committees. Now large property owners are becoming aware of the benefits of moving IT tools from specific applications towards more comprehensive solutions. This study addresses the state of Building Information Models and the conditions necessary for them to become more widely used. It is a qualitative study based on information from a number of international experts and has asked a series of questions about the feasibility of BIMs, the conditions necessary for their success, and the role of standards with particular reference to the IFCs. Some key statements were distilled from the diverse answers received and indicate that BIM solutions appear too complex for many and may need to be applied in limited areas initially. Standards are generally supported but not applied rigorously and a range of these are relevant to BIM. Benefits will depend upon the building procurement methods used and there should be special roles within the project team to manage information. Case studies are starting to appear and these could be used for publicity. The IFCs are rather oversold and their complexities should be hidden within simple-to-use software. Inevitably major questions remain and property owners may be the key to answering some of these. A framework for presenting standards, backed up by case studies of successful projects, is the solution proposed to provide better information on where particular BIM standards and solutions should be applied in building projects.

Use of Document Management Systems - a Case Study of the Finnish Construction Industry

Triggered by the very quick proliferation of Internet connectivity, electronic document management (EDM) systems are now rapidly being adopted for managing the documentation that is produced and exchanged in construction projects. Nevertheless there are still substantial barriers to the efficient use of such systems, mainly of a psychological nature and related to insufficient training. This paper presents the results of empirical studies carried out during 2002 concerning the current usage of EDM systems in the Finnish construction industry. The studies employed three different methods in order to provide a multifaceted view of the problem area, both on the industry and individual project level. In order to provide an accurate measurement of overall usage volume in the industry as a whole telephone interviews with key personnel from 100 randomly chosen construction projects were conducted. The interviews showed that while around 1/3 of big projects already have adopted the use of EDM, very few small projects have adopted this technology. The barriers to introduction were investigated through interviews with representatives for half a dozen of providers of systems and ASP-services. These interviews shed a lot of light on the dynamics of the market for this type of services and illustrated the diversity of business strategies adopted by vendors. In the final study log files from a project which had used an EDM system were analysed in order to determine usage patterns. The results illustrated that use is yet incomplete in coverage and that only a part of the individuals involved in the project used the system efficiently, either as information producers or consumers. The study also provided feedback on the usefulness of the log files.

The Context and Diffusion of Knowledge in the Finnish Jewellery Industry - The role of the House of Fabergé

Researchers within the fields of economic geography and organizational management have extensively studied learning and the prerequisites and impediments for knowledge transfer. This paper combines two discourses within the two subjects: the-communities-of-practice and the learning region approaches, merging them through the so-called ecology of knowledge-approach, which is used to examine the knowledge transfer from the House of Fabergé to the Finnish jewellery industry. We examine the pre-revolution St Petersburg jewellery cluster and the post-revolution Helsinki, and the transfer of knowledge between these two locations through the components of communities of people, institutions and industry. The paper shows that the industrial dynamics of the Finnish modern-day goldsmith industry was inherently shaped both through the transfer and the non-transfer of knowledge. It also contends that the “knowledge-economy” is not anchored in and exclusive for the high technology sector of the late 20th century.