Community Pharmacies and the Needs of Mobile EU Citizens - A study on Finns living in Spain

Migration within the European Union (EU) has increased since the Union was established. Community pharmacies provide open access to health care services and can be the first, most frequently used or even the only contact with a nation s health care system among mobile community residents. In some of the mass-migration areas in Southern Europe, most of the customers may represent mobile citizens of foreign background. This has not always been taken into consideration in the development of community pharmacy services. Mobile patients have been on the EU's health policy agenda, but they have seldom been mentioned in the context of community pharmacies. In most of the EU member states, governments control the specific legislation concerning community pharmacies and there is no harmonised pharmaceutical policy or consistent minimal standards for community pharmacy services in the EU. The aim of this study was to understand medication use, the role of community pharmacies and the symptom mitigation process of mobile community residents. Finns living in Spain were used as an example to examine how community pharmacies in a EU member state meet the needs of mobile community residents. The data were collected by a survey in 2002 (response rate 53%, n= 533) and by five focus group discussions in 2006 (n=30). A large number (70%) of the respondents had moved to Spain for health reasons and suffered from chronic morbidity. Community pharmacies had an important role in the healthcare of mobile community residents and the respondents were mostly satisfied with these services. However, several medication safety risks related to community pharmacy practices were identified: 1) Availability of prescription medicines without prescription (e.g., antibiotics, sleeping pills, Viagra®, asthma medications, cardiovascular medicines, psoriasis medicines and analgesics); 2) Irrational use of medicines (e.g., 41% of antibiotic users had bought their antibiotics without a prescription, and the most common reasons for antibiotic self-medication were symptomatic common colds and sore throats); 3) Language barriers between patients and pharmacy professionals; 4) Lack of medication counselling; 5) Unqualified pharmacy personnel providing pharmacotherapy. A fifth of the respondents reported experiencing problems during pharmacy visits in Spain, and the lack of a common language was the source of most of these problems. The findings of this study indicate that regulations and their enforcement can play a crucial role in actually assuring the rational and safe use of medicines. These results can be used in the development of pharmaceutical and healthcare policies in the EU. It is important to define consistent minimum standards for community pharmacy services in the EU. Then, the increasing number of mobile community residents could access safe and high quality health care services, including community pharmacy services, in every member state within the EU.

Methicillin Resistance In Staphylococci : Horizontal Transfer of Mobile Genetic Element (SCCmec) Between Staphylococcal Species

Regardless of the existence of antibiotics, infectious diseases are the leading causes of death in the world. Staphylococci cause many infections of varying severity, although they can also exist peacefully in many parts of the human body. Most often Staphylococcus aureus colonises the nose, and that colonisation is considered to be a risk factor for spread of this bacterium. S. aureus is considered to be the most important Staphylococcus species. It poses a challenge to the field of medicine, and one of the most problematic aspects is the drastic increase of the methicillin-resistant S. aureus (MRSA) strains in hospitals and community world-wide, including Finland. In addition, most of the clinical coagulase-negative staphylococcus (CNS) isolates express resistance to methicillin. Methicillin-resistance in S. aureus is caused by the mecA gene that encodes an extra penicillin-binding protein (PBP) 2a. The mecA gene is found in a mobile genomic island called staphylococcal chromosome cassette mec (SCCmec). The SCCmec consists of the mec gene and cassette chromosome recombinase (ccr)gene complexes. The areas of the SCCmec element outside the ccr and mec complex are known as the junkyard J regions. So far, eight types of SCCmec(SCCmec I- SCCmec VIII) and a number of variants have been described. The SCCmec island is an acquired element in S. aureus. Lately, it appears that CNS might be the storage place of the SCCmec that aid the S. aureus by providing it with the resistant elements. The SCCmec is known to exist only in the staphylococci. The aim of the present study was to investigate the horizontal transfer of SCCmec between the S. aureus and CNS. One specific aim was to study whether or not some methicillin-sensitive S. aureus (MSSA) strains are more inclined to receive the SCCmec than others. This was done by comparing the genetic background of clinical MSSA isolates in the health care facilities of the Helsinki and Uusimaa Hospital District in 2001 to the representatives of the epidemic MRSA (EMRSA) genotypes, which have been encountered in Finland during 1992-2004. Majority of the clinical MSSA strains were related to the EMRSA strains. This finding suggests that horizontal transfer of SCCmec from unknown donor(s) to several MSSA background genotypes has occurred in Finland. The molecular characteristics of representative clinical methicillin-resistant S. epidermidis (MRSE) isolates recovered in Finnish hospitals between 1990 and 1998 were also studied, examining their genetic relation to each other and to the internationally recognised MRSE clones as well, so as to ascertain the common traits between the SCCmec elements in MRSE and MRSA. The clinical MRSE strains were genetically related to each other; eleven PFGE types were associated with sequence type ST2 that has been identified world-wide. A single MRSE strain may possess two SCCmec types III and IV, which were recognised among the MRSA strains. Moreover, six months after the onset of an outbreak of MRSA possessing a SCCmec type V in a long-term care facility in Northern Finland (LTCF) in 2003, the SCCmec element of nasally carried methicillin-resistant staphylococci was studied. Among the residents of a LTCF, nasal carriage of MR-CNS was common with extreme diversity of SCCmec types. MRSE was the most prevalent CNS species. Horizontal transfer of SCCmec elements is speculated to be based on the sharing of SCCmec type V between MRSA and MRSE in the same person. Additionally, the SCCmec element of the clinical human S. sciuri isolates was studied. Some of the SCCmec regions were present in S. sciuri and the pls gene was common in it. This finding supports the hypothesis of genetic exchange happening between staphylococcal species. Evaluation of the epidemiology of methicillin-resistant staphylococcal colonisation is necessary in order to understand the apparent emergence of these strains and to develop appropriate control strategies. SCCmec typing is essential for understanding the emergence of MRSA strains from CNS, considering that the MR-CNS may represent the gene pool for the continuous creation of new SCCmec types from which MRSA might originate.

Middleware for Mobile Sensing Applications in Urban Environments

Sensor networks represent an attractive tool to observe the physical world. Networks of tiny sensors can be used to detect a fire in a forest, to monitor the level of pollution in a river, or to check on the structural integrity of a bridge. Application-specific deployments of static-sensor networks have been widely investigated. Commonly, these networks involve a centralized data-collection point and no sharing of data outside the organization that owns it. Although this approach can accommodate many application scenarios, it significantly deviates from the pervasive computing vision of ubiquitous sensing where user applications seamlessly access anytime, anywhere data produced by sensors embedded in the surroundings. With the ubiquity and ever-increasing capabilities of mobile devices, urban environments can help give substance to the ubiquitous sensing vision through Urbanets, spontaneously created urban networks. Urbanets consist of mobile multi-sensor devices, such as smart phones and vehicular systems, public sensor networks deployed by municipalities, and individual sensors incorporated in buildings, roads, or daily artifacts. My thesis is that "multi-sensor mobile devices can be successfully programmed to become the underpinning elements of an open, infrastructure-less, distributed sensing platform that can bring sensor data out of their traditional close-loop networks into everyday urban applications". Urbanets can support a variety of services ranging from emergency and surveillance to tourist guidance and entertainment. For instance, cars can be used to provide traffic information services to alert drivers to upcoming traffic jams, and phones to provide shopping recommender services to inform users of special offers at the mall. Urbanets cannot be programmed using traditional distributed computing models, which assume underlying networks with functionally homogeneous nodes, stable configurations, and known delays. Conversely, Urbanets have functionally heterogeneous nodes, volatile configurations, and unknown delays. Instead, solutions developed for sensor networks and mobile ad hoc networks can be leveraged to provide novel architectures that address Urbanet-specific requirements, while providing useful abstractions that hide the network complexity from the programmer. This dissertation presents two middleware architectures that can support mobile sensing applications in Urbanets. Contory offers a declarative programming model that views Urbanets as a distributed sensor database and exposes an SQL-like interface to developers. Context-aware Migratory Services provides a client-server paradigm, where services are capable of migrating to different nodes in the network in order to maintain a continuous and semantically correct interaction with clients. Compared to previous approaches to supporting mobile sensing urban applications, our architectures are entirely distributed and do not assume constant availability of Internet connectivity. In addition, they allow on-demand collection of sensor data with the accuracy and at the frequency required by every application. These architectures have been implemented in Java and tested on smart phones. They have proved successful in supporting several prototype applications and experimental results obtained in ad hoc networks of phones have demonstrated their feasibility with reasonable performance in terms of latency, memory, and energy consumption.

XML Messaging for Mobile Devices

In recent years, XML has been widely adopted as a universal format for structured data. A variety of XML-based systems have emerged, most prominently SOAP for Web services, XMPP for instant messaging, and RSS and Atom for content syndication. This popularity is helped by the excellent support for XML processing in many programming languages and by the variety of XML-based technologies for more complex needs of applications. Concurrently with this rise of XML, there has also been a qualitative expansion of the Internet's scope. Namely, mobile devices are becoming capable enough to be full-fledged members of various distributed systems. Such devices are battery-powered, their network connections are based on wireless technologies, and their processing capabilities are typically much lower than those of stationary computers. This dissertation presents work performed to try to reconcile these two developments. XML as a highly redundant text-based format is not obviously suitable for mobile devices that need to avoid extraneous processing and communication. Furthermore, the protocols and systems commonly used in XML messaging are often designed for fixed networks and may make assumptions that do not hold in wireless environments. This work identifies four areas of improvement in XML messaging systems: the programming interfaces to the system itself and to XML processing, the serialization format used for the messages, and the protocol used to transmit the messages. We show a complete system that improves the overall performance of XML messaging through consideration of these areas. The work is centered on actually implementing the proposals in a form usable on real mobile devices. The experimentation is performed on actual devices and real networks using the messaging system implemented as a part of this work. The experimentation is extensive and, due to using several different devices, also provides a glimpse of what the performance of these systems may look like in the future.

Performance of Ajax Applications on Mobile Devices

The Ajax approach has outgrown its origin as shorthand for "Asynchronous JavaScript + XML". Three years after its naming, Ajax has become widely adopted by web applications. Therefore, there exists a growing interest in using those applications with mobile devices. This thesis evaluates the presentational capability and measures the performance of five mobile browsers on the Apple iPhone and Nokia models N95 and N800. Performance is benchmarked through user-experienced response times as measured with a stopwatch. 12 Ajax toolkit examples and 8 production-quality applications are targeted, all except one in their real environments. In total, over 1750 observations are analyzed and included in the appendix. Communication delays are not considered; the network connection type is WLAN. Results indicate that the initial loading time of an Ajax application can often exceed 20 seconds. Content reordering may be used to partially overcome this limitation. Proper testing is the key for success: the selected browsers are capable of presenting Ajax applications if their differing implementations are overcome, perhaps using a suitable toolkit.

Service-based Requirements for Future Mobile Networks

The mobile phone has, as a device, taken the world by storm in the past decade; from only 136 million phones globally in 1996, it is now estimated that by the end of 2008 roughly half of the worlds population will own a mobile phone. Over the years, the capabilities of the phones as well as the networks have increased tremendously, reaching the point where the devices are better called miniature computers rather than simply mobile phones. The mobile industry is currently undertaking several initiatives of developing new generations of mobile network technologies; technologies that to a large extent focus at offering ever-increasing data rates. This thesis seeks to answer the question of whether the future mobile networks in development and the future mobile services are in sync; taking a forward-looking timeframe of five to eight years into the future, will there be services that will need the high-performance new networks being planned? The question is seen to be especially pertinent in light of slower-than-expected takeoff of 3G data services. Current and future mobile services are analyzed from two viewpoints; first, looking at the gradual, evolutionary development of the services and second, through seeking to identify potential revolutionary new mobile services. With information on both current and future mobile networks as well as services, a network capability - service requirements mapping is performed to identify which services will work in which networks. Based on the analysis, it is far from certain whether the new mobile networks, especially those planned for deployment after HSPA, will be needed as soon as they are being currently roadmapped. The true service-based demand for the "beyond HSPA" technologies may be many years into the future - or, indeed, may never materialize thanks to the increasing deployment of local area wireless broadband technologies.

Service Composition on a Mobile Phone

With the recent increase in interest in service-oriented architectures (SOA) and Web services, developing applications with the Web services paradigm has become feasible. Web services are self-describing, platform-independent computational elements. New applications can be assembled from a set of previously created Web services, which are composed together to make a service that uses its components to perform a certain task. This is the idea of service composition. To bring service composition to a mobile phone, I have created Interactive Service Composer for mobile phones. With Interactive Service Composer, the user is able to build service compositions on his mobile phone, consisting of Web services or services that are available from the mobile phone itself. The service compositions are reusable and can be saved in the phone's memory. Previously saved compositions can also be used in new compositions. While developing applications for mobile phones has been possible for some time, the usability of the solutions is not the same as when developing for desktop computers. When developing for mobile phones, the developer has to more carefully consider the decisions he is going to make with the program he is developing. With the lack of processing power and memory, the applications cannot function as well as on desktop PCs. On the other hand, this does not remove the appeal of developing applications for mobile devices.

AndroMedia - Towards a Context-aware Mobile Music Recommender

Portable music players have made it possible to listen to a personal collection of music in almost every situation, and they are often used during some activity to provide a stimulating audio environment. Studies have demonstrated the effects of music on the human body and mind, indicating that selecting music according to situation can, besides making the situation more enjoyable, also make humans perform better. For example, music can boost performance during physical exercises, alleviate stress and positively affect learning. We believe that people intuitively select different types of music for different situations. Based on this hypothesis, we propose a portable music player, AndroMedia, designed to provide personalised music recommendations using the user’s current context and listening habits together with other user’s situational listening patterns. We have developed a prototype that consists of a central server and a PDA client. The client uses Bluetooth sensors to acquire context information and logs user interaction to infer implicit user feedback. The user interface also allows the user to give explicit feedback. Large user interface elements facilitate touch-based usage in busy environments. The prototype provides the necessary framework for using the collected information together with other user’s listening history in a context- enhanced collaborative filtering algorithm to generate context-sensitive recommendations. The current implementation is limited to using traditional collaborative filtering algorithms. We outline the techniques required to create context-aware recommendations and present a survey on mobile context-aware music recommenders found in literature. As opposed to the explored systems, AndroMedia utilises other users’ listening habits when suggesting tunes, and does not require any laborious set up processes.

Architectural Solutions for Mobile RFID Services on Internet of Things

Mobile RFID services for the Internet of Things can be created by using RFID as an enabling technology in mobile devices. Humans, devices, and things are the content providers and users of these services. Mobile RFID services can be either provided on mobile devices as stand-alone services or combined with end-to-end systems. When different service solution scenarios are considered, there are more than one possible architectural solution in the network, mobile, and back-end server areas. Combining the solutions wisely by applying the software architecture and engineering principles, a combined solution can be formulated for certain application specific use cases. This thesis illustrates these ideas. It also shows how generally the solutions can be used in real world use case scenarios. A case study is used to add further evidence.

An XML Messaging Service for Mobile Devices

In recent years, XML has been accepted as the format of messages for several applications. Prominent examples include SOAP for Web services, XMPP for instant messaging, and RSS and Atom for content syndication. This XML usage is understandable, as the format itself is a well-accepted standard for structured data, and it has excellent support for many popular programming languages, so inventing an application-specific format no longer seems worth the effort. Simultaneously with this XML's rise to prominence there has been an upsurge in the number and capabilities of various mobile devices. These devices are connected through various wireless technologies to larger networks, and a goal of current research is to integrate them seamlessly into these networks. These two developments seem to be at odds with each other. XML as a fully text-based format takes up more processing power and network bandwidth than binary formats would, whereas the battery-powered nature of mobile devices dictates that energy, both in processing and transmitting, be utilized efficiently. This thesis presents the work we have performed to reconcile these two worlds. We present a message transfer service that we have developed to address what we have identified as the three key issues: XML processing at the application level, a more efficient XML serialization format, and the protocol used to transfer messages. Our presentation includes both a high-level architectural view of the whole message transfer service, as well as detailed descriptions of the three new components. These components consist of an API, and an associated data model, for XML processing designed for messaging applications, a binary serialization format for the data model of the API, and a message transfer protocol providing two-way messaging capability with support for client mobility. We also present relevant performance measurements for the service and its components. As a result of this work, we do not consider XML to be inherently incompatible with mobile devices. As the fixed networking world moves toward XML for interoperable data representation, so should the wireless world also do to provide a better-integrated networking infrastructure. However, the problems that XML adoption has touch all of the higher layers of application programming, so instead of concentrating simply on the serialization format we conclude that improvements need to be made in an integrated fashion in all of these layers.

Boost Customer Loyalty with Online Support. The Case of Mobile Telecoms Providers.

The paper explores the effect of customer satisfaction with online supporting services on loyalty to providers of an offline core service. Supporting services are provided to customers before, during, or after the purchase of a tangible or intangible core product, and have the purpose of enhancing or facilitating the use of this product. The internet has the potential to dominate all other marketing channels when it comes to the interactive and personalised communication that is considered quintessential for supporting services. Our study shows that the quality of online supporting services powerfully affects satisfaction with the provider and customer loyalty through its effect on online value and enjoyment. Managerial implications are provided.

Perceived Value of Mobile Service Use and its Consequences

The thesis is positioned in the services marketing field. Previous mobile service research has identified perceived value or relative advantage as a stable predictor of use of services. However, a more detailed view of what customers value in mobile services is needed for marketing diverse types of mobile content and attracting committed customers. The direct relationships between multidimensional value and loyalty constructs have received limited attention in the previous literature, although a multidimensional view is needed for differentiating services. This thesis studies how perceived value of mobile service use affects customer commitment, repurchase intentions, word-of-mouth and willingness to pay. The doctoral thesis consists of three journal articles and one working paper. The four papers have different sub-aims and comprise individual empirical studies. Mixed methods including both personal interviews and survey data collected from end-users of different types of mobile content services are used. The conceptual mobile perceived value model that results from the first explorative empirical study supports a six- dimensional value view. The six dimensions are further categorized into two higher order constructs: content-related perceived value (emotional, social, convenience and monetary value) and context-related (epistemic and conditional value) perceived value. Structural equation modeling is used in the other three studies to validate this framework by analyzing the relationships between context- and content-related value, and how the individual perceived value dimensions affect commitment and behavioral outcomes. Analyzing the direct relationships revealed differences in the effect of perceived value dimensions between information and entertainment mobile service user groups, between effects on commitment, repurchase intentions and word-of-mouth intentions, as well as between effects on commitment to the provider and to the mobile channel as such. This thesis contributes to earlier perceived value literature by structuring the value dimensions into two groups. Most importantly, the thesis contributes to the value and loyalty literature by increasing understanding of how the different dimensions of perceived value directly affect commitment and post-purchase intentions. The results have implications for further theory development in the electronic services field using multidimensional latent constructs, and practical implications for enhancing commitment to content provider and for differentiated marketing strategies in the mobile field. The general conclusion of this thesis is that differentiated value-based marketing of mobile services is essential for attracting committed customers who will use the same providers’ content also in the future. Minna Pihlström is associated with the Centre for Relationship Marketing and Service Management (CERS) at Hanken.