A thermal insulation method for a piezoelectric transducer

This study deals with the sources of signal distortion of a piezoelectric transducer heated by measured gas flow. These signal distortions originate from both unloading of preload on a piezocrystal because of expansion of a diaphragm in the test apparatus and the pyroelectric effect of a heated piezoelectric crystal. A plastic film on the diaphragm of the transducer can effectively insulate the diaphragm and the piezocrystal within transducer from heating by gas flow, eliminating the sources of distortion. A method for evaluating the thickness of the film is proposed.

On the formation of well-aligned ZnO nanowall networks by catalyst-free thermal evaporation method

Two-dimensional ZnO nanowall networks were grown on ZnO-coated silicon by thermal evaporation at low temperature without catalysts or additives. All of the results from scanning electronic spectroscope, X-ray diffraction and Raman scattering confirmed that the ZnO nanowalls were vertically aligned and c-axis oriented. The room-temperature photoluminescence spectra showed a dominated UV peak at 378 nm, and a much suppressed orange emission centered at similar to 590 nm. This demonstrates fairly good crystal quality and optical properties of the product. A possible three-step, zinc vapor-controlled process was proposed to explain the growth of well-aligned ZnO nanowall networks. The pre-coated ZnO template layer plays a key role during the synthesis process, which guides the growth direction of the synthesized products. (C) 2007 Elsevier B.V. All rights reserved.

On the formation of well-aligned ZnO nanowall networks by catalyst-free thermal evaporation method

Two-dimensional ZnO nanowall networks were grown on ZnO-coated silicon by thermal evaporation at low temperature without catalysts or additives. All of the results from scanning electronic spectroscope, X-ray diffraction and Raman scattering confirmed that the ZnO nanowalls were vertically aligned and c-axis oriented. The room-temperature photoluminescence spectra showed a dominated UV peak at 378 nm, and a much suppressed orange emission centered at similar to 590 nm. This demonstrates fairly good crystal quality and optical properties of the product. A possible three-step, zinc vapor-controlled process was proposed to explain the growth of well-aligned ZnO nanowall networks. The pre-coated ZnO template layer plays a key role during the synthesis process, which guides the growth direction of the synthesized products. (C) 2007 Elsevier B.V. All rights reserved.

用分子动力学模拟甲烷水合物热激法分解

用分子动力学模拟方法研究甲烷水合物热激法分解，系统地研究注入340 K液态水的结构Ⅰ型甲烷水合物的分解机理.模拟显示水合物表层水分子与高温液态水分子接触获得热能，分子运动激烈，摆脱水分子间的氢键束缚，笼状结构被破坏.甲烷分子获得热能从笼中挣脱，向外体系扩散.热能通过分子碰撞从外层传递给内层水分子，水合物逐层分解.对比注入277K液态水体系模拟结果，得出热激法促进水合物分解.

Structure and UV emission of nanocrystal ZnO films by thermal oxidation of ZnS films

ZnO films prepared by the thermal oxidation of the ZnS films through thermal evaporation are reported. The as-deposited ZnS films have transformed to ZnO films completely at 400 degrees C. The 400-700 degrees C annealed films with a preferential c-axis (002) orientation have a hexagonal wurtzite structure. The band gap of ZnO films shifts towards longer wavelength with the increase of the annealing temperature. The relationship between the band gap energy of ZnO films and the grain size is discussed. The shift of the band gap energy can be ascribed to the quantum confinement effect in nanocrystal ZnO films. The photoluminescence spectra of ZnO films show a dominant ultraviolet emission and no deep level or trap state defect emission in the green region. It confirms the absence of interstitial zinc or oxygen vacancies in ZnO films. These results indicate that ZnO film prepared by this simple thermal oxidation method is a promising candidate for optoelectronic devices and UV laser. (c) 2005 Elsevier BN. All rights reserved.

Solid-phase crystallization and dopant activation of amorphous silicon films by pulsed rapid thermal annealing

An improved pulsed rapid thermal annealing method has been used to crystallize amorphous silicon films prepared by PECVD. The solid-phase crystallization and dopant activation process can be completed with time-temperature budgets such as 10 cycles of 60-s 550 degrees C thermal bias/l-s 850 degrees C thermal pulse. A mean grain size more than 1000 Angstrom and a Hall mobility of 24.9 cm(2)/V s are obtained in the crystallized films. The results indicate that this annealing method possesses the potential for fabricating large-area and good-quality polycrystalline silicon films on low-cost glass substrate. (C) 1998 Elsevier Science B.V. All rights reserved.

Coordination-Induced Formation of One-Dimensional Nanostructures of Europium Benzene-1,3,5-tricarboxylate and Its Solid-State Thermal Transformation

Novel one-dimensional europium benzene-1,3,5-tricarboxylate compressed nanorods have been synthesized oil it large scale through direct precipitation in solution phase under moderate conditions without the assistance of any surfactant, catalyst, or template. The obtained nanorods have widths of about 50-100 not, thicknesses of 10-20 nm, and lengths ranging from a few hundred nanometers to several micrometers. X-ray powder diffraction. elemental analysis, Fourier transform infrared Studies, and thermogravimetric and differential thermal analysis show that the nanorods have the structural formula of Eu(1,3,5-BTC)center dot 6H(2)O. Upon UV excitation, these nanorods exhibit a highly efficient luminescence. which comes from the Eu3+ ions. Moreover, Eu2O3 nanorods Could also be obtained via a thermal decomposition method using the corresponding complex as a precursor. This synthetic route is promising for the preparation of other one-dimensional crystalline nanomaterials because of its simplicity and the low cost of the starting reagents.

The Experimental and Numerical Studies on Gas Production from Hydrate Reservoir by Depressurization

A set of experimental system to study hydrate dissociation in porous media is built and some experiments on hydrate dissociation by depressurization are carried out. A mathematical model is developed to simulate the hydrate dissociation by depressurization in hydrate-bearing porous media. The model can be used to analyze the effects of the flow of multiphase fluids, the kinetic process and endothermic process of hydrate dissociation, ice-water phase equilibrium, the variation of permeability, convection and conduction on the hydrate dissociation, and gas and water productions. The numerical results agree well with the experimental results, which validate our mathematical model. For a 3-D hydrate reservoir of Class 3, the evolutions of pressure, temperature, and saturations are elucidated and the effects of some main parameters on gas and water rates are analyzed. Numerical results show that gas can be produced effectively from hydrate reservoir in the first stage of depressurization. Then, methods such as thermal stimulation or inhibitor injection should be considered due to the energy deficiency of formation energy. The numerical results for 3-D hydrate reservoir of Class 1 show that the overlying gas hydrate zone can apparently enhance gas rate and prolong life span of gas reservoir.

Precipitation of nanocrystals in glasses by electron irradiation: An alternative path to form glass ceramics?

This letter demonstrates an alternative method to form gallium silicate glass ceramics using high-energy electron irradiation. Compared with glass ceramics obtained from the conventional thermal treatment method, the distribution and crystal sizes of the precipitated Ga2O3 nanoparticles are the same. An advantage of this method is that the spatial distribution of the precipitated nanoparticles can be easily controlled. However, optically active dopants Ni2+ ions do not participate in the precipitation during electron irradiation. (c) 2007 American Institute of Physics.

Yb∶Y_3Al_5O_(12)/Y_3Al_5O_(12)复合晶体的制作和光谱性能

采用热键合技术,制作中运用不同的工艺参量制作出12片Yb∶Y3Al5O12/Y3Al5O12(Yb∶YAG/YAG)复合晶体。利用偏光显微镜对其键合界面进行了观察,研究了样品的透射光谱,从而确定出复合晶体合适的制作工艺。通过透射光谱的形状和透射率来表征复合晶体键合界面的质量。研究表明Yb∶YAG/YAG复合晶体键合质量较好,可实现一体化。

Bonding quality of Yb : Y3Al5O12/Y3Al5O12 composite crystals

The Yb:Y3Al5O12/Y3Al5O12 (Yb:YAG/YAG) composite crystals were prepared by thermal bonding method with different technological parameters. The bonding interface of the composite crystals were observed by optical microscope, scanning electron microscope, and atom force microscope. The light scattering experiments for bonding interface of the composite crystals were measured by the laser and transmission spectra. All experiments show that high-quality Yb:YAG/YAG composite crystals without space transition layer and light scattering on the bonding interface can be obtained by thermal bonding method under appropriate technological parameters.

热键合制作Yb：Y3Al5O12／Y3Al5O12复合晶体

采用热键合技术制备了Yb：Y3Al5O12／Y3Al5O12（Yb：YAG／YAG）复合晶体，对复合晶体进行了结构表征和键合质量检测，利用光学显微镜和扫描电镜观察了复合晶体横截面的形貌；在偏光显微镜下观察键合区域的应力，利用干涉条纹来表征复合晶体的光学均匀性；通过红外透过光谱的测量来检测复合晶体的键合质量．实验结果表明：热键合技术制备的Yb：YAG／YAG复合晶体键合界面处无界面缺陷，不存在复合界面空间过渡层，光学均匀性良好．

浑善达克沙地榆树树干液流动态研究

本文应用Granier热扩散技术对内蒙古浑善达克沙地榆树疏林林分进行树干液流通量研究，分别选择胸径大小占林分80%以上林木的三种胸径级（15-25cm，25-35cm，35-45cm）榆树样树各三株，应用Granier探针进行每隔15min的树干液流测定，同步测定林分环境因子，包括空气温度、相对湿度、土壤温度、土壤湿度、光合有效辐射、风速等10余个环境因子，在生长季节进行了5个月的测定，详细研究和分析了榆树树杆液流特征，其中包括昼夜变化趋势和规律、不同天气状况下的液流密度变化特点以及在生长季不同时期的液流密度变化规律，阐述了不同胸径级榆树树干液流变化特征。同时利用连续获得的树干液流通量与环境因子数据，分析了树干液流通量与环境因子的关系，阐明不同时期影响树干液流通量变化的主导因素，以及树干液流密度对环境因子的响应规律。并通过钻取样地内的树木生长年轮芯测定了榆树不同径级的边材面积，建立边材和胸径的关系方程，估算了不同胸径林分的边材面积以及冠层蒸腾的季节动态。 在晴朗的白天，不同胸径级榆树的树干液流密度变化曲线均呈单峰曲线，只是峰值持续的时间不同。不同胸径级榆树树干液流密度变化具有明显的昼夜节律性。在生长季结束后液流并不是马上停止，而是有微弱的波动。阴雨天液流密度变化曲线均不规则且液流密度值较小，甚至出现多峰曲线，而且峰值明显;液流密度的变化出现较大的波动性，夜间却有液流发生，而且值较晴天的夜间液流密度稍大。 林分不同胸径级榆树树干大径级木、中径级木和小径级木液流通量特征表现为: 榆树大径级木液流密度的峰值大于中等木，中等木峰值大于小径级木，差异明显;大径级木由于年龄较大，液流密度曲线变化平缓，没有明显的峰值，呈弧形曲线; 而且不同年龄的树木反映差别比较大，但是总体趋势还是受胸径的影响。 随季节推移生长季各月份液流密度均值基本逐渐减小，进入生长季末期(10月)基本处于微弱波动状态。液流通量月平均值最大值一般都出现在6-8月，大径级木、中径级木和小径级木各月液流通量变化差异较大。日液流通量比较分析得出，大径级木日液流通量最大值分别为394.53，中径级木为66.04，小径级木为63.56 kg∙ d-1。综合分析对不同胸径树木影响较大的环境因子为VPD，PAR，Ta; 但是在不同生长季节，对不同类型树木起主要作用的环境因子也不尽相同，但是PAR与VPD是其中基本主要起作用的两个因子。 通过建立边材与胸径的关系方程，得出边材和胸径关系(R2=0.99)。通过经验公式计算得出，林分生长期的蒸腾耗水量相当于2.24mm/day, 低于当地同期降雨量2.78mm/day.

Effect of substrate temperature on the growth and photoluminescence properties of vertically aligned ZnO nanostructures

Vertically well-aligned ZnO nanoridge, nanorod, nanorod-nanowall junction, and nanotip arrays have been successfully synthesized on Si (100) substrates using a pulsed laser deposition prepared ZnO film as seed layer by thermal evaporation method. Experimental results illustrated that the growth of different morphologies of ZnO nanostructures was strongly dependent upon substrate temperature. X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies showed that the ZnO nanostructures were single crystals with a wurtzite structure. Compared with those of the other nanostructures, the photoluminescence (PL) spectrum of nanorod-nanowall junctions showed the largest intensity ratio of ultraviolet (UV) to yellow-green emission and the smallest full-width at half-maximum (FWHM) of the UV peak, reflecting the high optical quality and nearly defect free of crystal structure. The vertical alignment of the nanowire array on the substrate is attributed to the epitaxial growth of the nanostructures from the ZnO buffer layer. The growth mechanism was also discussed in detail. (c) 2006 Elsevier B.V. All rights reserved.