谷子体细胞无性系变异和抗除草剂基因转化研究

谷子是我国北方具有区域重要性的禾谷类粮食作物。谷子的体细胞无性系变异和外源基因转化相对其它作物研究较少。本研究利用谷子生产的育种中应用的多个优良品种为材料，分析了谷子体细无性系变异发生的影响因素、变异性和频率、DNA分子水平变异和育种应用等问题;采用基因枪法和花粉管通道法，进行了谷子抗除草剂基因转化研究。 主要结果包括： 1. 通过几种外植体的愈伤组织诱导分析,找到了小花分化期前后的谷子幼穗是愈伤组织诱导的最好外植体.提出谷子愈伤组织可按生长状态和结构划分为质密型、松软型和松散型三种基本类型的观点。前两种为胚性愈伤组织并可相互转换，松软型愈伤组织生长状态稳定，可塑性好，是继代培养和因基化的首选类型。供试品种中豫谷1号、高39、郑407和矮宁黄为易培养品种，矮88、豫谷2号、系238、冀14号、C445和青丰谷为相对难培养品种。这些结果为谷子组织培养和生物技术操作提供了基础资料。 2. 首次对多个谷子品种较大群体的无性系变异进行了分析。结果表明，以R_2株系为单位的谷子体细胞无性系表现型变异频率平均为13.0%，不同基因型的变幅为4.3～32.9%;变异涉及株高、抽穗期、穗粒重、出谷率、叶鞘色、育性、抗病性、米色、穗型等多个性状，多数变异为株高和抽穗期等数量性状，少数为矮秆等质量性状：变异的性状多数能在R_3稳定并遗传给后代。从谷子体细胞无性系变异中选出了一批农艺性状得到改良的新品系，其中系103已进入省区域试验，并提供给多家育种单位作为亲本应用。 3. 将RAPD分析技术引入谷子体细胞无性系变异研究。豫谷2号无性系的RAPD多态性变化既有亲本带的缺失，也有新带的产生。用RAPD多态性变化的SMC值度量无性系同亲本相比DNA水平变异的大小，表现型发生变异的无性系,其SMC值分别为0.905～1.0;表现型未发生变异的无性系，RAPD多态性也可能发生变化，其SMC值分布为0.953～1.0。 4. 通过Gus基因瞬时表达单位数的比较，优化了JQ－700基因枪转化谷子松型愈伤组织的操作参数：质粒DNA用量3μg/mg钨粉，CaCl_2农度1.5M，亚精胺浓度40mM，样品室高度7cm，粗弹头为微弹载体，每皿愈伤组织用量1～2g，每次轰击钨粉用量50μg，轰击前4小时和轰击后16～20小时，用含蔗糖150g/l的高渗培养基处理。利用该技术体系，以bar基因为目的基因转化豫谷2号愈伤组织。经选择培养和植株再生，首次获得了抗0.1% bialaphos的正常可育植株，经PCR和Southern blot分析，bar基因已整合到转化体的基因组中，为创造抗除草剂的谷子新种质提供了材料和技术基础。 5. 研究了花粉管通道法转化和花粉介导的基因枪转化谷子的可行性。花粉管通道法转化后代中，获得了抗0.1% bialaphos的抗性植株，经X-gluc组织化学检测，抗性植株叶片的Gus反应为阳性。初步说明该植株可能为转化体，在谷子上为花粉管通道法转化的可行性提供了佐证。花粉介导的基因枪转化未获得转化体。 本文对体细胞无性系变异形成的原因和应用、无性系变异的分子生物学分析、以及谷子的外源基因转化方法等问题进行了讨论。

体细胞无性系变异与烟草抗黑胫病细胞突变体的筛选

体细胞无性系变异是植物组织培养过程中发生的一种较为普遍的现象，这种现象在遗传学理论和育种实践上都很值得研究。应用这种变异进行筛选人们已经获得了一大批生产上有广泛意义的细胞突变体。但对于无性系变异发生的机理，人们虽然也进行了详细研究，提出了不少假说，但一直未能给出一个较为全面的解释。有些解释仍然建立在推测的基础上，有待进一步的研究。在这些解释中，利用转座子活化进行解释是最使人感兴趣的一种，也是较有说服力的一种。我们的实验分为两个部分，一是对无性系变异发生与转座子的关系进行了初步的探索,一是利用体细胞无性系变异筛选烟草黑胫病细胞突变体的应用进行了研究。 对转座因子的转活性进行分析，通常采用标记基因的表型检测。本实验用农杆菌双元载体pSLJ721（Ac∷GUS）转化烟草（品种：红花大金元）， 然后对转基因烟草的愈伤组织进行GUS酶活性的组织化学分析。通过GUS活性变化来分析转座活性。结果表明组织培养可以增强转座子的活性。间接证明转座子活化是体细胞无性系变异的原因之. 本论文实验方面的另一部分是体细胞无性系变异在烟草抗黑茎病研究上的应用。烟草黑茎病是由烟草致病疫霉引起的一种烟草主要病害。首先从云南地区黑胫病病区分离、纯化黑胫病（Phytophythora parasitica via. Nicotina）病原菌，同时利用红花大金元为实验对象，以组织培养中自然发生的元性系变异为基础，以50％以及80％的黑胫病病菌粗毒素为选择压力，筛选出抗黑胫病毒素的烟草株系，用离体叶片法和茎部接种法进一步鉴定其对黑胫病病菌的抗性。最后进行田间检测以期获得综合性状优良的抗黑胫病细胞突变体。另外我们还利用随机引物扩增多态DNA（RAPD）分析技术，对选择到的九个抗病株系和六株对照的DNA进行分析。在使用的70种随机引物中，共有57个引物产生可检测扩增产物，产生306条搁增带，其中有多态性的条带数为51条，突变体的平均RAPD条带变异率为1.85％，其中有两个RAPD条带（CYA－17－100和Sangon03-350）为突变体所特有，可初步判断为抗黑胫病的RAPD标记。对突变体和对照植株叶片水溶性蛋白SDS电泳观察到一些条带的变异，但没有找到突变体特异的共同条带。

Influences of strain rate and temperature variation on material intrinsic length of plasticity strain gradient theory

Cowper-Symonds and Johnson-Cook dynamic constitutive relations are used to study the influence of both strain rate effect and temperature variation on the material intrinsic length scale in strain gradient plasticity. The material intrinsic length scale decreases with increasing strain rates, and this length scale increases with temperature.

Characters of variation of LURR during the earthquake sequence of Xinjiang

The theory of the loading/unloading response ratio (LURR) was applied to the Jiashi earthquake sequence which occurred at the beginning of 1997 in Xinjiang, and found that, before the earthquakes with relatively high magnitudes In the sequence, the ratio showed anomalies of high values. That is to say, the LURR theory can be applied to the short-term earthquake prediction in some cases, especially in the early period after a strong earthquake, such as the forecasts for some strong earthquakes in the Jiashi sequence.

Variation of drag coefficient with wind wave development

Turbulent air flows over developing wind waves in the air-sea boundary layer are numerically simulated without considering wave breaking. Influences of wind waves on air flows are considered using a model of significant wave and surface roughness, with a formula proposed for calculating the surface roughness, k - epsilon model is adopted to simulate turbulent flows. The results of the drag coefficient and turbulence characteristics agree well with the observations.

Variation Of Flexural Strength Of Cement Mortar Attacked By Sulfate Ions

Under the environment of seawater, durability of concrete materials is one of the chief factors considered in the design of structures. The decrease of durability of structures is induced by the evolution of micro-damage due to the erosion of chlorine and sulfate ions, which is characterized by the reduction of modulus, strength, and toughness of the material. In this paper, the variation of the flexural strength of cement mortar under sulfate erosion is investigated. The results obtained in present work indicate that the erosion time, concentration of sulfate solution, and water-to-cement ratio will significantly affect the flexural strength. Crown Copyright (c) 2008 Published by Elsevier Ltd. All rights reserved.

Variation of added mass and its application to the calculation of amplitude response for a circular cylinder

In the present study, analyzed are the variation of added mass for a circular cylinder in the lock-in ( synchronization) range of vortex-induced vibration (VIV) and the relationship between added mass and natural frequency. A theoretical minimum value of the added mass coefficient for a circular cylinder at lock-in is given. Developed are semi-empirical formulas for the added mass of a circular cylinder at lock-in as a function of flow speed and mass ratio. A comparison between experiments and numerical simulations shows that the semi-empirical formulas describing the variation of the added mass for a circular cylinder at lock-in are better than the ideal added mass. In addition, computation models such as the wake oscillator model using the present formulas can predict the amplitude response of a circular cylinder at lock-in more accurately than those using the ideal added mass.

Spatial and Temporal Variation of LURR and Its Implication for the Tendency of Earthquake Occurrence in Southern California

Based on the theory of LURR and its recent development, spatial and temporal variation of Y/Y-c (value of LURR/critical value of LURR) in the Southern California region during the period from 1980 through March, 2001 was studied. According to the previous study on the fault system and stress field in Southern California, we zoned the Southern California region into 11 parts in each of which the stress field is almost uniform. With the time window of one year, time moving step of three months, space window of a circle region with a radius of 100 km and space moving step of 0.25 degree in latitude and longitude direction, the evolution of Y/Y-c were snapshot. The scanning results show that obvious Y/Y-c anomalies occurred before 5/6 of strong earthquakes considered with a magnitude of 6.5 or greater. The critical regions of Y/Y-c are near the epicenters of the strong earthquakes and the Y/Y-c anomalies occur months to years prior to the earthquakes. The tendency of earthquake occurrence in the California region is briefly discussed on the basis of the examination of Y/Y-c.

Variation of flexural strength of cement mortar attacked by sulfate ions

Under the environment of seawater, durability of concrete materials is one of the chief factors considered in the design of structures. The decrease of durability of structures is induced by the evolution of micro-damage due to the erosion of chlorine and sulfate ions, which is characterized by the reduction of modulus, strength, and toughness of the material. In this paper, the variation of the flexural strength of cement mortar under sulfate erosion is investigated. The results obtained in present work indicate that the erosion time, concentration of sulfate solution, and water-to-cement ratio will significantly affect the flexural strength. Crown Copyright (c) 2008 Published by Elsevier Ltd. All rights reserved.

Superresolution by three-zone pure phase plate with 0, pi, 0 phase variation

Superresolution is very important in imaging and optical storage systems, and has attracted much attention. In this article, concentric three-zone phase plate with 0, pi, 0 phase variation has been investigated numerically to show that this kind of phase plate can be used to obtain three-dimensional superresolution. In addition, the number of intensity maximum, focal depth, focal shift, full-width half-maximum, and relative intensity of side lobe are listed for different radii of the phase zones, which paves the way for design of the phase plate. Therefore, one can choose values of radii for desired intensity distribution in focal region, such as for the purpose of radial superresolution with high focal depth in optical storage. (c) 2006 Elsevier Ltd. All rights reserved.