7 resultados para petrophysical properties
em Chinese Academy of Sciences Institutional Repositories Grid Portal
Resumo:
In the production tail of oilfield, water-cut is very high in thick channel sand oil reservoir, but recovery efficiency is relative low, and recoverable remaining oil reserves is more abundant, so these reserves is potential target of additional development. The remaining oil generally distributed with accumulation in certain areas, controlled by the reservoir architecture that mainly is the lateral accretion shale beddings in the point bar, so the study of reservoir architecture and the remaining oil distribution patterns controlled by architecture are very significant. In this paper, taking the Minghuazhen formation of Gangxi oilfield as a case, using the method of hierarchy analysis, pattern fitting and multidimensional interaction, the architecture of the meandering river reservoir is precisely anatomized, and the remaining oil distribution patterns controlled by the different hierarchy architecture are summarized, which will help to guide the additional development of oil fields. Not only is the study significant to the remaining oil forecasting, but also it is important for the theory development of reservoir geology. With the knowledge of sequence correlation and fluvial correlation model, taking many factors into account, such as combination of well and seismic data, hierarchical controlling, sedimentary facies restraint, performance verification and 3-D closure, an accurate sequence frame of the study area was established. On the basis of high-resolution stratigraphic correlation, single layer and oil sand body are correlated within this frame, and four architecture hierarchies, composite channel, single channels, point bars and lateral accretion sandbody are identified, The result indicates that Minghuazhen Formation of Gangxi oilfield are dominated by meandering river deposition, including two types of channel sandbodies, narrow band and wide band channel sandbody, and each of them has different characteristics of facies variation laterally. Based on the identification of composite channel, according to the spatial combination patterns and identified signs of single channel, combined with channel sandbody distribution and tracer material data, single channel sandbodies are identified. According to empirical formula, point-bar scales of the study area are predicted, and three identification signs are summarized, that is, positive rhythm in depositional sequence, the maximum thick sand and near close to the abandoned channel, and point bars are identified. On the basis of point bar recognition, quantitative architecture models inner point bar are ascertained, taking the lateral accretion sand body and lateral accretion shale beddings in single well as foundation, and quantitative architecture models inner point bar as guidance, and result of tracer material data as controlling, the the lateral accretion sand body and lateral accretion shale beddings are forecasted interwell, so inner architecture of point bar is anatomied. 3-D structural model, 3-D facies model and 3-D petrophysical properties models are set up, spatial distribution characteristics of sedimentary facies and petrophysical properties is reappeared. On the basis of reservoir architecture analysis and performance production data, remaining oil distribution patterns controlled by different hierarchy architecture units, stacked channel, single channel and inner architecture of point bar, are summarized, which will help to guide the additional development of oil fields.
Resumo:
Exploration study proves that East sea shelf basin embeds abundant hydrocarbon resources. However, the exploration knowledge of this area is very low. Many problems in exploration are encountered here. One of them is that the gas reservoir of this area, with rapid lateral variation, is deeply buried. Correlation of Impendence between sandstone, gas sand and shale is very poor. Another problem is that the S/N ratio of the seismic data is very low and multiples are relatively productive which seriously affect reservoir identification. Resolution of the seismic data reflected from 2500-3000 meter is rather low, which seriously affects the application of hydrocarbon direct identification (HDI) technology. This research established a fine geological & geophysical model based on drilling、well logging、geology&seismic data of East sea Lishui area. A Q value extraction method from seismic data is proposed. With this method, Q value inversion from VSP data and seismic data is performed to determine the subsurface absorption of this area. Then wave propagation and absorption rule are in control. Field acquisition design can be directed. And at the same time, with the optimization of source system, the performance of high resolution seismic acquisition layout system is enhanced. So the firm foundation is ensured for east sea gas reservoir exploration. For solving the multiple and amplitude preserving problems during the seismic data processing, wave equation pre-stack amplitude preservation migration and wave equation feedback iteratively multiple attenuation technologies are developed. Amplitude preservation migration technology can preserve the amplitude of imaging condition and wave-field extrapolation. Multiple removing technology is independent of seismic source wavelet and velocity model, which avoiding the weakness of Delft method. Aiming at the complicated formation condition of the gas reservoir in this area, with dissecting typical hydrocarbon reservoir, a series of pertinent advanced gas reservoir seismic identification technologies such as petrophysical properties analyzing and seismic modeling technology、pre-stack/post-stack joint elastic inversion, attribute extraction technology based on seismic non-stationary signal theory and formation absorption characteristic and so on are studied and developed. Integrated analysis of pre-stack/post-stack seismic data, reservoir information, rock physics and attribute information is performed. And finally, a suit of gas reservoir identification technology is built, according to the geological and geophysical characteristics of this area. With developed innovative technologies, practical application and intergrated interpretation appraisal researches are carried out in Lishui 36-1.The validity of these technologies is tested and verified. Also the hydrocarbon charging possibility and position of those three east sea gas exploration targets are clearly pointed out.
Resumo:
Application of long-term exploration for oil and gas shows that the reservoir technology of prediction is one of the most valuable methods. Quantitative analysis of reservoir complexity is also a key technology of reservoir prediction. The current reservoir technologies of prediction are based on the linear assumption of various physical relationships. Therefore, these technologies cannot handle complex reservoirs with thin sands, high heterogeneities in lithological composition and strong varieties in petrophysical properties. Based on the above-mentioned complex reservoir, this paper conducts a series of researches. Both the comprehending and the quantitative analysis of reservoir heterogeneities have been implemented using statistical and non-linear theories of geophysics. At the beginning, the research of random media theories about reservoir heterogeneities was researched in this thesis. One-dimensional (1-D) and two-dimensional (2-D) random medium models were constructed. The autocorrelation lengths of random medium described the mean scale of heterogeneous anomaly in horizontal and deep directions, respectively. The characteristic of random medium models were analyzed. We also studied the corresponding relationship between the reservoir heterogeneities and autocorrelation lengths. Because heterogeneity of reservoir has fractal nature, we described heterogeneity of reservoir by fractal theory based on analyzing of the one-dimensional (1-D) and two-dimensional (2-D) random medium models. We simulated two-dimensional (2-D) random fluctuation medium in different parameters. From the simulated results, we can know that the main features of the two-dimensional (2-D) random medium mode. With autocorrelation lengths becoming larger, scales of heterogeneous geologic bodies in models became bigger. In addition, with the autocorrelation lengths becoming very larger, the layer characteristic of the models is very obvious. It would be difficult to identify sandstone such as gritstone, clay, dense sandstone and gas sandstone and so on in the reservoir with traditional impedance inversion. According to the obvious difference between different lithologic and petrophysical impedance, we studied multi-scale reservoir heterogeneities and developed new technologies. The distribution features of reservoir lithological and petrophysical heterogeneities along vertical and transverse directions were described quantitatively using multi-scale power spectrum and heterogeneity spectrum methods in this paper. Power spectrum (P spectrum) describes the manner of the vertical distribution of reservoir lithologic and petrophysical parameters and the large-scale and small-scale heterogeneities along vertical direction. Heterogeneity spectrum (H spectrum) describes the structure of the reservoir lithologic and petrophysical parameters mainly, that is to say, proportional composition of each lithological and petrophysical heterogeneities are calculated in this formation. The method is more reasonable to describe the degree of transverse multi-scale heterogeneities in reservoir lithological and petrophysical parameters. Using information of sonic logs in Sulige oil field, two spectral methods have been applied to the oil field, and good analytic results have been obtained. In order to contrast the former researches, the last part is the multi-scale character analysis of reservoir based on the transmission character of wave using the wavelet transform. We discussed the method applied to demarcate sequence stratigraphy and also analyzed the reservoir interlayer heterogeneity.
Resumo:
In the prediction of complex reservoir with high heterogeneities in lithologic and petrophysical properties, because of inexact data (e.g., information-overlapping, information-incomplete, and noise-contaminated) and ambiguous physical relationship, inversion results suffer from non-uniqueness, instability and uncertainty. Thus, the reservoir prediction technologies based on the linear assumptions are unsuited for these complex areas. Based on the limitations of conventional technologies, the thesis conducts a series of researches on various kernel problems such as inversions from band-limited seismic data, inversion resolution, inversion stability, and ambiguous physical relationship. The thesis combines deterministic, statistical and nonlinear theories of geophysics, and integrates geological information, rock physics, well data and seismic data to predict lithologic and petrophysical parameters. The joint inversion technology is suited for the areas with complex depositional environment and complex rock-physical relationship. Combining nonlinear multistage Robinson seismic convolution model with unconventional Caianiello neural network, the thesis implements the unification of the deterministic and statistical inversion. Through Robinson seismic convolution model and nonlinear self-affine transform, the deterministic inversion is implemented by establishing a deterministic relationship between seismic impedance and seismic responses. So, this can ensure inversion reliability. Furthermore, through multistage seismic wavelet (MSW)/seismic inverse wavelet (MSIW) and Caianiello neural network, the statistical inversion is implemented by establishing a statistical relationship between seismic impedance and seismic responses. Thus, this can ensure the anti-noise ability. In this thesis, direct and indirect inversion modes are alternately used to estimate and revise the impedance value. Direct inversion result is used as the initial value of indirect inversion and finally high-resolution impedance profile is achieved by indirect inversion. This largely enhances inversion precision. In the thesis, a nonlinear rock physics convolution model is adopted to establish a relationship between impedance and porosity/clay-content. Through multistage decomposition and bidirectional edge wavelet detection, it can depict more complex rock physical relationship. Moreover, it uses the Caianiello neural network to implement the combination of deterministic inversion, statistical inversion and nonlinear theory. Last, by combined applications of direct inversion based on vertical edge detection wavelet and indirect inversion based on lateral edge detection wavelet, it implements the integrative application of geological information, well data and seismic impedance for estimation of high-resolution petrophysical parameters (porosity/clay-content). These inversion results can be used to reservoir prediction and characterization. Multi-well constrains and separate-frequency inversion modes are adopted in the thesis. The analyses of these sections of lithologic and petrophysical properties show that the low-frequency sections reflect the macro structure of the strata, while the middle/high-frequency sections reflect the detailed structure of the strata. Therefore, the high-resolution sections can be used to recognize the boundary of sand body and to predict the hydrocarbon zones.
Resumo:
In this thesis, detailed studies on the sedimentology and petrophysical properties of reservoir rocks in the Shan#2 Member of Shanxi Formation, Zizhou gas field of Ordos Basin, are carried out, based on outcrop description, core description, wireline log interpretation and analysis of petrophysical properties. In the context of stratigraphic division scheme of the Upper Paleozoic in Ordos Basin, the Shan#2 Member is further divided into three subintervals: the Shan#23, Shan#22 and Shan#21, based on the marker beds,depositional cycles, wireline log patterns. Subaqueous deltaic-front distributary channels, distributed from the south to north, is identified,which is the main reservoir sand bodies for gases of Shan#2 Member at Zizhou gas field. Quartzose and lithic-quartzose sandstones, commonly with a high volume of cement, but a low volume of matrix, are the major reservoir rocks in the studied area. All sandstones have been evolved into the late diagenetic stage (referred to as diagenetic stage B) during the burial, experiencing compaction, cementation, replacement and dissolution, in which the compaction and cementation could have reduced the porosity, while dissolution could have improved the petrophysical properties. The pore types in the reservoirs are dominated by intergranular-solutional, intergranular-intercrystal and intercrystal-solutional porosity. According to the parameters and capillary pressure curves of test samples, five types of pore texture (I-V) are differentiated, in which types II and III pore textures displayed by low threshold pressure-wide pore throat and moderate threshold pressure-moderately wide pore throat, exist widespread. Sandstone reservoirs in the studied area are characterized by exceptionally low porosity and permeability, in which the petrophysical properties of those in Shan#23 horizon are relatively better. The petrophysical property of reservoirs was influenced both by the sedimentation and diagenesis. In general, the coarse quartzose sandstones deposited in subaqueous distributary channels show the best petrophysical property, which tends to be worse as the grain size decreases and lithic amount increases. Three types of gas reservoirs in Shan#23 horizon are classified according to petrophysical properties (porosity and permeability), which could have been influenced by the initial depositional facies, diagenesis and tectonics. On the basis of the study on the geological conditions of reservoirs in the area, it is concluded that sedimetary facies, diagenesis and tectonic actions can provide an important foundation for gas pool formation, which can also control the accumulation and distribution of gas reservoirs.
Resumo:
This paper belong to national "973" technological project undertaken by Shengli Oilfield. Work area is composed of turbidite reservoir of S212 and delta reservoir of S283 of Sheng2 unit in Shengtuo Oilfield that has a 36 years water injection development history. Change of the macroscopic, microscopic and filterational parameters and its mechanism have been studied in the 4 water-cut stages i.e. the primary, moderate, high and supper-high stage by using multi-disciplinary theories and approaches, computer techniques and physical simulation comprehensively. Dynamic reservoir models to different water-cut stages have been established. The study of forming mechanism and distribution of residual oil revealed the main types and spatial distribution of residual oil in different water-cut stages and the distribution mode has also been built up. Macroscopic, microscopic and filterational parameters selecting principle, optimizing and selecting standard, matching standard and laws and related database of various dynamic parameters in different water-cut stages have been established, which laid good basis for revealing reservoir macroscopic, microscopic and filterational parameters' dynamic change and residual oil distribution. The study indicated that in general, the macroscopic, microscopic and filterational parameters will slowly increase and become better in both shallow turbidite and delta reservoirs with the increasing of water cut, but different reservoirs have their own characteristics and change laws. Parameters of I~2 unit, whose petrophysical properties are better, increase more quickly than 8~3, whose petrophysical properties are more unfavorable. The changes was relatively quickly in high water-cut stage, while relatively slowly from primary to moderate and from high to supper-high water-cut stage. This paper firstly put forward that reservoir macroscopic, microscopic and filterational parameters are controlled by dynamic geological function of reservoir fluid, which is considered the major reason of reservoir parameters' dynamic changes and residual oil formation and distribution during reservoir development. Physical simulation of filterational parameters verified that forming mechanism and distribution of residual oil in different water-cut stages are also controlled by dynamic geological function of reservoir fluid. The idea of fluid geological function during reservoir development developed the theory of development geology, and has important practical values. This paper firstly constructed dynamic geological and mathematical models and five modes of residual oil distribution in Shengtuo Oilfield, and achieved four-dimensional forecast of residual oil distribution in different watercut stages. Dynamic changes and mechanism of macroscopic, microscopic and fliterational parameters of reservoir and their change process have been revealed. Forecast of residual oil distribution has been achieved by computers. This paper established the related theories, approaches and techniques for residual oil study, characterization and in different water-cut stages, and realized dynamic forecast of residual oil. It gained remarkable economic benefit and social effect in guiding field development. These theories and techniques had important meaningfulness for residual oil prediction in the terrestrial faulted basins not only in Shengli Oilfield but also in the east of China. Furthermore, this study has developed the theory of development geology.
Resumo:
Kela-2 gas field in Tarim Basin is the main supply source for West-to-East Pipeline project, also the largest abnormally-pressured gas field discovered in China currently. The geological characterization, fine geological modeling and field development plan are all the world-class difficult problems. This work includes an integrated geological and gas reservoir engineering study using advanced technology and approaches, the scientific development plan of Kela-2 gas field as well as the optimizations of the drilling, production and surface schemes. Then, it's expected that the Kela-2 gas field can be developed high-efficiently.Kuche depression is one part of the thrust belt of the South Tianshan Mountains, Kela-2 field is located at the Kelasu structural zone in the north of Kuche depression. The field territory is heavily rugged with deeply cut gullies, complex geological underground structure, variable rock types, thrust structure development. Therefore, considerable efforts have been made to develop an integrated technique to acquire, process and interpret the seismic data in complicated mountain region. Consequently a set of seismic-related techniques in the complicated mountain region has been developed and successfully utilized to interpret the structure of Kela-2 gas field.The main reservoir depositional system of Kela 2 gas field is a platform - fan delta - braided river system. The reservoir rocks are medium-fine and extremely fine grained sandstones with high structure maturity and low composition maturity. The pore system structure is featured by medium-small pore, medium-fine throat and medium-low assortment. The reservoir of Kela-2 gas field is characteristic of medium porosity and medium permeability. The pay zone is very thick and its lateral distribution is stable with a good connection of sand body. The overpressure is caused mainly by the strongly tectonic squash activities, and other factors including the later rapid raise and compartment of the high-pressure fluid, the injection of high-pressure fluid into the reservoir.Based on the deliverability tests available, the average binomial deliverability equation is provided applicable for the overall field. The experimental results of rock stress-sensitive tests are employed to analyze the change trend of petrophysical properties against net confining stress, and establish the stress-based average deliverability equation. The results demonstrate the effect of rock deformation on the deliverability is limited to less than 5% in the early period of Kela-2 gas field, indicating the insignificant effect on deliverability of rock deformation.In terms of the well pattern comparisons and development planning optimizations, it is recommended that the producers should be located almost linearly along the structural axis. A total of 9 producers have a stable gas supply volume of 10.76 BCMPY for 17 years. For Kela-2 gas field the total construction investment is estimated at ¥7,697,690,000 RMB with the internal earning rate of 25.02% after taxation, the net present value of ¥7,420,160,000 RMB and the payback period of 5.66 years. The high profits of this field development project are much satisfactory.