Surface-enhanced Raman scattering substrate fabricated by femtosecond laser direct writing

We report the fabrication of a novel surface-enhanced Raman scattering (SERS) substrate with a controllable enhancement factor (EF) using femtosecond laser direct writing on Ag+-doped phosphate glass followed by chemical plating at similar to 40 degrees C. Silver seeds were first photoreduced using a femtosecond laser in a laser-irradiated area and then transformed into silver nanoparticles of suitable size for SERS application in the subsequent chemical plating. Rhodamine 6G was used as a probing molecule to investigate the enhancement effect of a Raman signal on the substrate. Nearly homogenous enhancement of the Raman signal over the Substrate was achieved, and the EF of the substrate was controlled to some extent by adjusting fabrication parameters. Moreover, the ability of forming a SERS platform in an embedded microfluidic chamber would be of great use for establishing a compact lab-on-a-chip device based on Raman analysis.

Direct writing computer-generated holograms on metal film by an infrared femtosecond laser

Writing computer-generated holograms has been achieved by using near infrared femtosecond laser selective ablation of metal film deposited on glass substrate. The diffraction features with data reconstruction of fabricated computer-generated holograms were evaluated. Both transmission and reflection holograms can be fabricated in a single process. The process required no mask, no pre- or post-treatment of the substrate. (C) 2005 Optical Society of America.

Surface characteristics of SiO2-TiO2 strip fabricated by laser direct writing

SiO2-TiO2 sol-gel films are deposited on SiO2/Si by dip-coating technique. The SiO2-TiO2 strips are fabricated by laser direct writing using all ytterbium fiber laser and followed by chemical etching. Surface structures, morphologies and roughness of the films and strips are characterized. The experimental results demonstrate that the SiO2-TiO2 sol-gel film is loose in Structure and a shrinkage concave groove forms if the film is irradiated by laser beam. The surface roughness of both non-irradiated and laser irradiated areas increases with the chemical etching time. But the roughness of laser irradiated area increases more than that of non-irradiated area under the same etching time. After being etched for 28 s, the surface roughness value of the laser irradiated area increases from 0.3 nm to 3.1 nm.

Expert system for elucidation of structures of organic compounds (ESESOC) - Algorithm on stereoisomer generation

An algorithm for enumeration of stereoisomers due to asymmetric carbon, C=C double bond and so on has been developed. It consists of three steps. The output of stereoisomers can be represented by 2.5-dimensional connection table.

EXPERT-SYSTEM FOR ELUCIDATION OF STRUCTURES OF ORGANIC-COMPOUNDS

An expert system for the elucidation of the structures of organic compounds-ESESOC-II has been designed. It is composed of three parts: spectroscopic data analysis, structure generator, and evaluation of the candidate structures. The heart of ESESOC is the structure generator, as an integral part, which accepts the specific types of information, e.g. molecular formulae, substructure constraints, and produces an exhaustive and irredundant list of candidate structures. The scheme for the structural generation is given, in which the depth-first search strategy is used to fill the bonding adjacency matrix (BAM) and a new method is introduced to remove the duplicates.

AN EXPERT SYSTEM FOR SOLVENT-EXTRACTION OF RARE-EARTHS

An expert system for solvent extraction of rare earths has been developed using LISP. The goal of this project was to mimic the chemists' inferential abilities to assist in the process of solvent extraction of rare earths. The system includes frequently used extractants, separation of specific rare earths, recommendation of procedures for the separation of mixtures of rare earths using (2-ethylhexyl)phosphonic acid 2-ethylhexyl monoester, selection of parameters for counter-current extraction and methods for evaluation of the technique, and the economics of the processing. The expert system runs on an IBM-PC/XT.

学习不良少年的污名效应研究

Stigma is defined as a sign of disgrace or discredit that sets a person apart from others. Stigmatized individuals had been significantly influenced by their group-based stigma. Through the methods of laboratory experiment and questionnaire surveys, the current study started with examining the attitudes of middle school students to the students with learning disabilities (LD), systemly explored the characteristics of perceived stigma and self-stigma of LD students, the mechanism that the influences of stigma on students with LD, and the mental control required to cope with the stigma. The results of the present studies had significant implications for the understanding of the LD phenomenon and the intervention of LD adolescents. The results indicate that: 1. Generally, middle school students had negative implicit attitude and negative explicit attitudes towards the LD students. The effect size of the phenomenon of this study is large. The LD students showed a more positive attitude than others on the explicit attitude measure; all students consistently had negative attitudes toward LD students on the implicit attitude indices, in addition, no group differences and gender differences were observed in the implicit attitude. 2. Eight hundred and seventy two students were surveyed to test the reliability and validity of the new developed perceived stigma scale and self-stigma scale. Both questionnaires showed sufficient content validity, construct validity, criterion-related validity and adequate internal consistency reliability. Then, both questionnaires were administered to student with high academic achievement (high achiever), students with middle academic achievement (middle achiever), and LD students. Results revealed that the LD students mildly stigmatized by the social culture. The LD students had more stigma perception and self-stigma than the middle achievers and high achievers. The results also indicated that there were more stigma perception and self-stigma for LD students in grade two than that of LD students in grade one and grade three; meanwhile, male LDstudent hade more stigma perception and self-stigma than female LD students in all grades. 3. A latent variable path analysis was conducted to investigate how the stigma affect the academic goals using the data collected from 186 LD students. The results suggested that the LD-related stigma did not have direct influence on academic goals. The LD-related stigma indirectly influenced the academic goals through mediating effects of self-stigma and academic efficacy. 4. Stereotype threat could have some influences on the relationship between the task feedback and self-esteem. The results of study using eighty-four LD students showed that: when the negative stereotype was not primed, the self-esteem of the LD students was significantly influenced by the feedback of the task: an enhance self-esteem following a positive feedback and a lower self-esteem following a negative feedback. When the negative stereotype was primed, there was no significantly difference between the positive feedback group and negative feedback group. All the results showed that priming the negative stereotype could weaken the influence of feedback to the self-esteem of LD students. 5. There was more cognitive and behavioral control when LD students tried to cope with the stigma by concealing negative academic achievement during an individual interview with an unfamilar expert. The LD students whose academic achievements could be concealed had more thought suppression and thought intrusion and reported more self-monitoring behavior than the participants in the other experimental conditions.