crossmodal error correction of continuous handwriting recognition by speech

In recognition-based user interface, users’ satisfaction is determined not only by recognition accuracy but also by effort to correct recognition errors. In this paper, we introduce a crossmodal error correction technique, which allows users to correct errors of Chinese handwriting recognition by speech. The focus of the paper is a multimodal fusion algorithm supporting the crossmodal error correction. By fusing handwriting and speech recognition, the algorithm can correct errors in both character extraction and recognition of handwriting. The experimental result indicates that the algorithm is effective and efficient. Moreover, the evaluation also shows the correction technique can help users to correct errors in handwriting recognition more efficiently than the other two error correction techniques.

基于RS编码及网格编码调制的光PPM通信纠错技术

分析了RS（Reed-Solomon）纠错码和网格编码调制（Trellis Coded Modulation，TCM）技术在光脉冲位置调制通信中的应用．在此基础上，提出了以RS码作为外码，以网格编码调制技术作为内码，用于光脉冲位置调制通信的新编码方案，能以几乎不减少通信速率的优势，提高传统RS码系统在时变带限光信道中的通信性能．模拟研究了在不同空间光信道条件下，传统RS码的符号正确传输率和误码率，并对网格编码调制的编码增益、RS码与网格编码调制级联时的编码增益进行了仿真研究，证实了本方案的有效性．

光栅位移测量系统的误差自修正方法研究

文中介绍的误差自修正方法是通过光栅位移测量系统中单片机对光栅传感器的多个零位信号进行计数,并根据测量值和系统设定值得到的误差函数自动进行误差修正。实验结果表明,该方法对光栅位移测量系统的误差既可自动进行有效的修正,又可提高系统的测量精度。

A differential recursive scheme for suppression of Peak to average power ratio for OFDM

A differential recursive scheme for suppression of Peak to average power ratio (PAPR) for Orthogonal frequency division multiplexing (OFDM) signal is proposed in this thesis. The pseudo-randomized modulating vector for the subcarrier series is differentially phase-encoded between successive components in frequency domain first, and recursion manipulates several samples of Inverse fast Fourier transformation (IFFT) output in time domain. Theoretical analysis and experimental result exhibit advantage of differential recursive scheme over direct output scheme in PAPR suppression. And the overall block diagram of the scheme is also given.

Proposed scheme for parallel 10Gb/s VSR system and its Verilog HDL realization

This paper proposes a novel and innovative scheme for 10Gb/s parallel Very Short Reach (VSR) optical communication system. The optimized scheme properly manages the SDH/SONET redundant bytes and adjusts the position of error detecting bytes and error correction bytes. Compared with the OIF-VSR4-01.0 proposal, the scheme has a coding process module. The SDH/SONET frames in transmission direction are disposed as follows: (1) The Framer-Serdes Interface (FSI) gets 16x622.08Mb/s STM-64 frame. (2) The STM-64 frame is byte-wise stripped across 12 channels, all channels are data channels. During this process, the parity bytes and CRC bytes are generated in the similar way as OIF-VSR4-01.0 and stored in the code process module. (3) The code process module will regularly convey the additional parity bytes and CRC bytes to all 12 data channels. (4) After the 8B/10B coding, the 12 channels is transmitted to the parallel VCSEL array. The receive process approximately in reverse order of transmission process. By applying this scheme to 10Gb/s VSR system, the frame size in VSR system is reduced from 15552x12 bytes to 14040x12 bytes, the system redundancy is reduced obviously.

基于语音和笔的手写数学公式纠错方法

用识别技术的用户界面往往由于识别率的限制容易出错，如何为这类界面提供自然高效的纠错方法十分重要．手写数学公式具有二维结构，难以识别和纠错．提出一种用于纠正手写数学公式识别错误的多通道技术．它允许用户使用笔纠正切分错误，用笔和语音纠正符号识别和表达式结构分析错误．该技术的核心是一个多通道融合算法．融合算法以笔选择的符号和语音作为输入，根据语音输入的类型是数学术语或者数学符号分别选择融合方法，最后修正手写公式并输出最有可能的识别结果．实验结果表明，该技术能有效地纠正手写数学公式识别中的错误，它比基于笔的单通道纠错技术更加高效．

基于多通道融合的连续手写识别纠错方法

在基于识别的界面中,用户的满意度不但由识别准确度决定,而且还受识别错误的纠正过程的影响.提出一种基于多通道融合的连续手写笔迹识别错误的纠正方法.该方法允许用户通过口述书写内容纠正手写识别中的字符提取和识别的错误.该纠错方法的核心是一种多通道融合算法.该算法通过利用语音输入约束最优手写识别结果的搜索,可纠正手写字符的切分错和识别错.实验评估结果表明,该融合算法能够有效纠正错误,计算效率高.与另外两种手写识别错误纠正方法相比,该方法具有更高的纠错效率.

PSD空间定位的非线性误差补偿模型及归一化

PSD是一种高分辨率、实时性好的光电位置敏感器件,因而具有广泛应用的前景.但在光照度变化条件下,输出信号存在非线性飘移,因而影响了作为位置检测传感器的检测精度,尤其在3D测量时适用性受到了限制.针对这个问题,提出了一种PSD位置传感器的非线性误差补偿方法.该方法针对目标的空间距离变化所产生的PSD输出非线性飘移,采用归一化模型进行误差修正,很大程度上改进了PSD的输出一致性,使基于PSD的3D测量系统性能得以提高.

一种新型柔索驱动并联机器人的模型样机

提出一种新型并联机器人机构 ,利用张紧柔索驱动该并联机器人·通过运动学和动力学分析、工作空间分析、轨迹规划、误差分析 ,设计并制作了模型样机本体、驱动与控制模块 ,开发了机器人语言 ,控制模型样机完成指定动作·实验结果表明 ,这种新型并联机器人是可行的 ,适用于轻型机床等设备·该机器人在某一速度范围内工作时 ,会产生较明显的振动 ,并伴有噪声 ,因此要提高机器人的性能还必须设法抑制其振动

新型4自由度并联机器人位姿误差分析

将一种新型四自由度并联机器人等效为由串联机构构成的空间闭环机构 ,运用 Denavit- Hartenberg方法提出了运动平台位姿误差的一种分析算法。利用这个算法可以分析各种构件加工、安装误差对运动平台位姿精度的影响。进行了数值仿真验证了算法的正确性。最后分析出对位姿精度影响较大的因素 ,通过重视这些因素可提高实际机构的操作精度

基于信道估计的RS纠错编码改进算法的设计与实现

提出了一种基于信道估计的RS纠错编码改进算法,该算法可以自适应地根据外界条件和环境对传输信道的干扰变化实时地调节编码系统的数据冗余量。仿真与完整的分析结果证实了该改进算法有效地改善了RS编码算法的传输效率;并且通过实际应用表明:良好的性能,高容错性适应于该通信系统的多种传输信道,具有很强的实用性。

基于模型的立体视觉的优化方法

针对 3D视觉检测中最典型的误差源图像中像素的量化误差 ,在已知模型的条件下 ,对双目立体视觉提出一种模型。利用该优化模型及改进的约束最小二乘法对未知模型的立体视觉解法做一些改进 ,可以明显减小系统的误差。仿真结果表明 ,与未知模型的立体视觉方法相比 ,在同样的量化误差条件下 ,该方法可将系统误差减小 50 %以上。

Measurement of a reciprocal four-port transmission line structure using the 16-term error model

A new method to measure reciprocal four-port structures, using a 16-term error model, is presented. The measurement is based on 5 two-port calibration standards connected to two of the ports, while the network analyzer is connected to the two remaining ports. Least-squares-fit data reduction techniques are used to lower error sensitivity. The effect of connectors is deembedded using closed-form equations. (C) 2007 Wiley Periodicals, Inc.

A 16-term error model based on linear equations of voltage and current variables

Formulation of a 16-term error model, based on the four-port ABCD-matrix and voltage and current variables, is outlined. Matrices A, B, C, and D are each 2 x 2 submatrices of the complete 4 x 4 error matrix. The corresponding equations are linear in terms of the error parameters, which simplifies the calibration process. The parallelism with the network analyzer calibration procedures and the requirement of five two-port calibration measurements are stressed. Principles for robust choice of equations are presented. While the formulation is suitable for any network analyzer measurement, it is expected to be a useful alternative for the nonlinear y-parameter approach used in intrinsic semiconductor electrical and noise parameter measurements and parasitics' deembedding.