问题之间共性关系的意识水平对平面几何解题迁移的影响

Transfer of learning is one of the major concepts in educational psychology. As cognitive psychology develops, many researchers have found that transfer plays an important part in problem solving, and the awareness of the similarity of related problems is important in transfer. So they become more interested in researching the problem of transfer. But in the literature of transfer research, it has been found that many researchers do not hold identical conclusions about the influence of awareness of related problems during problem solving transfer. This dissertation is written on the basic of much of sub-research work, such as looking up literature concerning transfer of problem solving research, comparing the results of research work done recently and experimental researches. The author of this dissertation takes middle school students as subjects, geometry as materials, and adopts factorial design in his experiments. The influence of awareness of related problems on problem solving transfer is examined from three dimensions which are the degree of difficulty of transfer problems, the level of awareness of related problems and the characteristics of subjects themselves. Five conclusions have been made after the experimental research: (1) During the process of geometry problem solving, the level of awareness of related problems is one of the major factors that influence the effect of problem solving transfer. (2) Either more difficult or more easy of the transfer problems will hinder the influence of awareness of related problems during problem solving transfer, and the degree of difficulty of the transfer problems have interactions with the level of awareness of related problems in affecting transfer. (3) During geometry problems solving transfer, the level of awareness of related problems has interactions with the degree of student achievement. Compared with the students who have lower achievement, the influence of the level of the awareness is bigger in the students who have higher achievement. (4) There is positive correlation between geometry achievement and reasoning ability of the middle school students. The student who has higher reasoning ability has higher geometry achievement, while the level of awareness is raised, the transfer achievement of both can be raised significantly. (5) There is positive correlation between geometry achievement and cognitive style of the middle school students. The student who has independent field tendency of cognitive style has higher geometry achievement, while the level of awareness is raised, the transfer achievement of both can be raised significantly. At the end of the dissertation, the researcher offers two proposals concerning Geometry teaching on the basis of the research findings.

三维油藏数值模拟正反演算法研究

The dynamic prediction of complex reservoir development is one of the important research contents of dynamic analysis of oil and gas development. With the increase development of time, the permeabilities and porosities of reservoirs and the permeability of block reservoir at its boundaries are dynamically changing. How to track the dynamic change of permeability and porosity and make certain the permeability of block reservoir at its boundary is an important practical problem. To study developing dynamic prediction of complex reservoir, the key problem of research of dynamic prediction of complex reservoir development is realizing inversion of permeability and porosity. To realize the inversion, first of all, the fast forward and inverse method of 3-dimension reservoir simulation must be studied. Although the inversion has been widely applied to exploration and logging, it has not been applied to3-dimension reservoir simulation. Therefore, the study of fast forward and inverse method of 3-dimension reservoir simulation is a cutting-edge problem, takes on important realistic signification and application value. In this dissertation, 2-dimension and 3-dimension fluid equations in porous media are discretized by finite difference, obtaining finite difference equations to meet the inner boundary conditions by Peaceman's equations, giving successive over relaxation iteration of 3-dimension fluid equations in porous media and the dimensional analysis. Several equation-solving methods are compared in common use, analyzing its convergence and convergence rate. The alternating direction implicit procedure of 2-dimension has been turned into successive over relaxation iteration of alternating direction implicit procedure of 3-dimension fluid equations in porous media, which possesses the virtues of fast computing speed, needing small memory of computer, good adaptability for heterogeneous media and fast convergence rate. The geological model of channel-sandy reservoir has been generated with the help of stochastic simulation technique, whose cross sections of channel-sandy reservoir are parabolic shapes. This method makes the hard data commendably meet, very suit for geological modeling of containing complex boundary surface reservoir. To verify reliability of the method, theoretical solution and numerical solution are compared by simplifying model of 3-dimension fluid equations in porous media, whose results show that the only difference of the two pressure curves is that the numerical solution is lower than theoretical at the wellbore in the same space. It proves that using finite difference to solve fluid equations in porous media is reliable. As numerical examples of 3-dimension heterogeneous reservoir of the single-well and multi-well, the pressure distributions have been computed respectively, which show the pressure distributions there are clearly difference as difference of the permeabilities is greater than one order of magnitude, otherwise there are no clearly difference. As application, the pressure distribution of the channel-sandy reservoir have been computed, which indicates that the space distribution of pressure strongly relies on the direction of permeability, and is sensitive for space distributions of permeability. In this dissertation, the Peaceman's equations have been modified into solving vertical well problem and horizontal well problem simultaneously. In porous media, a 3D layer reservoir in which contain vertical wells and horizontal wells has been calculated with iteration. For channel-sandy reservoir in which there are also vertical wells and horizontal wells, a 3D transient heterogeneous fluid equation has been discretized. As an example, the space distribution of pressure has been calculated with iteration. The results of examples are accord with the fact, which shows the modification of Peaceman's equation is correct. The problem has been solved in the space where there are vertical and horizontal wells. In the dissertation, the nonuniform grid permeability integration equation upscaling method, the nonuniform grid 2D flow rate upscaling method and the nonuniform grid 3D flow rate upscaling method have been studied respectively. In those methods, they enhance computing speed greatly, but the computing speed of 3D flow rate upscaling method is faster than that of 2D flow rate upscaling method, and the precision of 3D flow rate upscaling method is better than that of 2D flow rate upscaling method. The results also show that the solutions of upscaling method are very approximating to that of fine grid blocks. In this paper, 4 methods of fast adaptive nonuniform grid upscaling method of 3D fluid equations in porous media have been put forward, and applied to calculate 3D heterogeneous reservoir and channel-sandy reservoir, whose computing results show that the solutions of nonuniform adaptive upscaling method of 3D heterogeneous fluid equations in porous media are very approximating to that of fine grid blocks in the regions the permeability or porosity being abnormity and very approximating to that of coarsen grid blocks in the other region, however, the computing speed of adaptive upscaling method is 100 times faster than that of fine grid block method. The formula of sensitivity coefficients are derived from initial boundary value problems of fluid equations in porous media by Green's reciprocity principle. The sensitivity coefficients of wellbore pressure to permeability parameters are given by Peaceman's equation and calculated by means of numerical calculation method of 3D transient anisotropic fluid equation in porous media and verified by direct method. The computing results are in excellent agreement with those obtained by the direct method, which shows feasibility of the method. In the dissertation, the calculating examples are also given for 3D reservoir, channel-sandy reservoir and 3D multi-well reservoir, whose numerical results indicate: around the well hole, the value of the sensitivity coefficients of permeability is very large, the value of the sensitivity coefficients of porosity is very large too, but the sensitivity coefficients of porosity is much less than the sensitivity coefficients of permeability, so that the effect of the sensitivity coefficients of permeability for inversion of reservoir parameters is much greater than that of the sensitivity coefficients of porosity. Because computing the sensitivity coefficients needs to call twice the program of reservoir simulation in one iteration, realizing inversion of reservoir parameters must be sustained by the fast forward method. Using the sensitivity coefficients of permeability and porosity, conditioned on observed valley erosion thickness in wells (hard data), the inversion of the permeabilities and porosities in the homogeneous reservoir, homogeneous reservoir only along the certain direction and block reservoir are implemented by Gauss-Newton method or conjugate gradient method respectively. The results of our examples are very approximating to the real data of permeability and porosity, but the convergence rate of conjugate gradient method is much faster than that of Gauss-Newton method.

不同学习策略对改变学生物理要领错误的影响

In the field of misconceptions research, previous research was focused mainly on the effect of naive concepts on the learning of scientific concept. In this study, from the viewpoint of declarative and procedural knowledge, conceptual errors on Newtonian mechanics were studied comparatively between high-performance and low-performance students. Furthermore, the effects of self-explain learning strategies and reflective learning on the change of subjects' conceptual errors were explored. The result of experiments indicated: 1. There was significant difference in the number of conceptual errors of declarative and procedural knowledge between high-performance students and low-performance students. And Low-performance students made more conceptual errors of procedural knowledge than that of declarative knowledge. For high-performance students, there was no distinct difference between these two kinds of errors. 2. In the distribution of conceptual errors, most errors of declarative knowledge were mainly focused on the understanding of concepts of friction and acceleration. The errors of procedure knowledge most errors concentrated on the judgment of vector direction and the conceptual understanding. 3. Compared with high-performance students, the representation of conceptual declarative knowledge of low-performance students is less complex, more concrete and context bound. 4. The comparative analysis of problem-solving strategies showed: high-performance students preferred to apply analytic strategy, solving problems based on physical concepts and principles; low-performance students preferred to use context strategy, solving problem according to the literal meaning of problems, subjective and groundless presumption and wrong concepts and principles. 5. Self-explain strategies can help students correct their conceptual errors effectively. Reflective learning could help students to correct the concept errors in some degree, but the distinct effect was not observed.

An application of the analytic hierarchy process and fuzzy logic inference in a decision support system for forage selection

Forage selection plays a prominent role in the process of returning cultivated lands back into grasslands. The conventional method of selecting forage species can only provide attempts for problem-solving without considering the relationships among the decision factors globally. Therefore, this study is dedicated to developing a decision support system to help farmers correctly select suitable forage species for the target sites. After collecting data through a field study, we developed this decision support system. It consists of three steps: (1) the analytic hierarchy process (AHP), (2) weights determination, and (3) decision making. In the first step, six factors influencing forage growth were selected by reviewing the related references and by interviewing experts. Then a fuzzy matrix was devised to determine the weight of each factor in the second step. Finally, a gradual alternative decision support system was created to help farmers choose suitable forage species for their lands in the third step. The results showed that the AHP and fuzzy logic are useful for forage selection decision making, and the proposed system can provide accurate results in a certain area (Gansu Province) of China.

用计算机辅助创新软件解决产品技术创新问题的研究

本文简要介绍了发明问题解决理论TRIZ和机算机辅助创新软件Pro/Innovator的主要内容,建立了基于创新理论TRIZ和CAI软件的创新问题解决流程模型,作为特例建立了Pro/Innovator1.0的简化流程图,最后用软件完成了一个工程实例问题的创新设计。

典型人类活动对边坡变形及稳定性的影响研究

China is a mountainous country in which geological hazards occurred frequently, especially in the east of China. Except the geology, topography and extreme climate, the large scale human activities have become a major factor to landslides. Typical human activities which induced landslides are fill, cut and underground mining. On the topic of the deformation mechanism and slope stability, taking three different man-made slopes as examples, deformation mechanism and slope stability were studied by several methods, such as field work, numerical modeling and monitor. The details are as following: (1) The numerical modeling approach advantages over other conventional methods such as limit methods, so the numerical modeling is the major tool in this thesis. So far, there is no uniform failure criterion for numerical simulation. The failure criterion were summarized and analyzed firstly, subsequently the appropriate criterion was determinated. (2) Taking 220kV Yanjin transformation substation fill slope as example, the deformable characteristic, unstable mode and laboratory tests were studied systematically. The results show: the slope deformation was probably caused by a combination effect of unfavorable topographic, geological and hydro geological conditions, and external loading due to filling. It was concluded that the creep deformation of the slope was triggered by external loading applied at the back of the slope. In order to define the calculating parameters, a set of consolidated drained (CD) tests, consolidated undrained (CU) tests, repeated direct shear tests and UCS tests were carried out. The stability of the slope before and after reinforcement was assessed using 3D numerical modeling and shear strength reduction technique. The numerical modeling results showed: the factor of safety (FOS) of the slope was 1.10 in the natural state, and reduced to 1.03 after fill, which was close to the critical state and it caused creeping slip or deformation under rainfall. The failure surface in the slope is in active shear failure, whereas tensile failure occurs at the slope crest. After the site was reinforced with piles, the FOS was 1.27. Therefore, the slope is stable after reinforcement measures were taken. (3) The cut slope stability is a complex problem. Taking the left cut slope of Xiangjiaba as example in this thesis, the deformation and slope stability were studied systematically by numerical modeling and monitor methods. The numerical results show: the displacement is gradually increasing along with the cutting, and the largest displacement is 27.5mm which located at the bench between the elevation 340 and 380. Some failure state units distribute near the undermining part and there is no linked failure state occurred from crest to bottom during cutting. After cutting, some failure units appeared at the ground surface between elevation 340 and 360. The increasing tense stress made the disturbed rock failed. The slope is stable after cutting by the monitor method, such as surface monitor, multipoint displacement meter, inclinometer and anchor cable tensometer. (4) The interaction between underground mining and slope stability is a common situation in mountainous. The slope deformation mechanism induced by underground mining may contributed significantly to slope destabilization. The Mabukan slope in xiangjiaba was analyzed to illustrate this. Failure mechanism and the slope stability were presented by numerical modeling and residual deformation monitor. The results show: the roof deformed to the free face and the floor uplift lightly to the free face. The subsidence basin is formed, but the subsidence and the horizontal movement is small, and there is no failure zone occurred. When the underground mining is going on, the roof deformation, subsidence and the horizontal movements begin increasing. The rock deformation near the free face is larger than the ground surface, and the interaction between these coal seams appeared. There are some tensile failures and shear failures occurred on the roof and floor, and a majority of failure is tensile failure. The roof deformation, subsidence and the horizontal movements increased obviously along with the underground mining. The failure characteristic is shear failure which means the tensile stress transformed to the compressive stress. So the underground mining will induced tensile stress first which lead to structure crack, subsequently the compressive stress appeared which result in slippage. The crest was subjected to horizontal tension which made the rock crack along with the joint. The long term residual deformation monitor demonstrates that the slope is stable after the underground mining stopped.

Preparation of chitooligosaccharides from chitosan by a complex enzyme

Chitosan of 24% degree of acetylation was depolymerized by a mixture of cellulase, alpha amylase, and proteinase to give the title oligosaccharides. The removal of products by membrane separation permitted yield maximization of products having degree of polymerization in the 3-10 range. (C) 1999 Elsevier Science Ltd. All rights reserved.

团队有效性：协作行为与作业特征作用机制研究

Organizations are increasingly turning to team-based structures to contend with the pressure of the increasing global competition, consolidation, innovation and need for diverse skills, expertise, and experiences. This ongoing transformation in the basic organization of work has captured the attention of researcher. And group and team research has become increasingly centered in the fields of organizational psychology and organizational behavior since the 1990s. A great deal empirical studies were conducted; a number of variables contributing to team effectiveness and several IPO models were summarized. But teamwork behaviors, the dynamic and adaptive interactions among team members during the task completion, were still very vague. So were the team task characteristics, an important input variable of the IPO models. The effects of team task characteristics and teamwork behaviors on team effectiveness were explored according to IPO model on the basis of the reviews on previous studies, the Hierarchical Conceptual Structure of Teamwork Behaviors (Rousseau et al.,2006), and the task characteristic theory(Hackman & Oldman, 1975). The questionnaire data from 479 team members and 110 team managers of 22 organizations were analyzed. The results indicate: A. Teamwork behaviors consist of 13 behavioral dimensions: team mission analysis, goal specification, planning, coordination, cooperation, information exchange, performance monitoring, backing-up behaviors, intra-team coaching, collaborative problem solving, team practice innovation, psychological support and integrative conflict management. The hierarchical conceptual structure was partly supported with five variable identified, i.e., preparation of work accomplishment, task-related collaborative behaviors, work assessment behaviors, team adjustment behaviors and the management of team maintenance. The formal four variables are in a sequential way. B. The task characteristic theory at individual level is applicable to the team level. This means that the team task characteristics consist of task variety, identity, significance, feedback, autonomy, interdependence. C. The correlations among task characteristics, teamwork behaviors and outcomes support the IPO model. The regulation of team performance mediated the effects of task meaningfulness and interdependence on team outcomes, with the direct effects of task meaningfulness on the preparation behaviors and the direct effects of interdependence on the task-related collaborative behaviors. The management of team maintenance mediated the effects of autonomy on team cohesion and satisfaction. The regulation of team performance has a direct effect on the team performance and the management of team maintenance. And the management of team maintenance has a direct effect on the team attitude and the regulation of team performance.

比较型算术应用题一致性效应的实验研究

As former research shown, the error rate of consistent compare word problem (such as: Mary has 5 apples, Tom has 2 apples more than Mary, how many apples does Tom has?) is much lower than the rate of inconsistent compare word problem (such as: Mary has 5 apples, she has 2 apples more than Tom, how many apples does Tom has?). This difference of error rate is named as Consistency Effect. There are different explanations about why consistency effect happens, one of them is R.E.Mayer's opinion about two kinds of problem solving strategies. As Mayer's opinion, unsuccessful problem solvers make mistakes on inconsistent problem because they use Direct Translation Strategy, problem solvers who use Problem Model Strategy will not make such kind of mistakes. In this study, three experiments with 3~(rd) graders investigate reasons for the consistency effect. The results of experiment 1 do not support the explanation of Mayer's theory of two kinds of strategy. Experiment 2 shows that there is no relation between inconsistent problem error and Impulsivity cognitive style. Experiment 3 reveals that the working memory capacity of successful inconsistent problem solvers is significant larger than the capacity of unsuccessful solvers. It is supposed that working memory could be an important factor contributing for the consistency effect.

中学生问题解决中操作要求对资源分配的影响

Schema acquisition is one of the mechanisms of learning. How to design reasonable teaching material to promote schema acquisition is an important question that psychological researchers and educators both interested. Cognitive Load Theory indicates that: The cognitive resource of Human is limited, the organization and presentation of the learning material should avoid demanding the learner consume resource in actions that have nothing to do with schema acquisition. How can we do that? Sweller. J. et think: Increasing the operation cost of the learning material would make the students put more resource into the implementation of the operation, this kind of resource consuming has nothing to do with schema acquisition. So, in order to make the students put more resource into actions which relating to schema acquisition, we should decrease the operation cost of the learning material. But, the research results of O'Hara et indicate: In problem-solving of knowledge lean field, increasing the operation cost would make the college students invent more resource to plan and understanding actions. So, Increasing the operation cost would facilitate the schema acquisition. How operation cost will effect the Middle-School Students' (MSS) schema acquisition and resource distribution when they solve problems of knowledge lean/rich field? This is the main question this research want to make inquiry. IN this research, we use three experiments indicate: Increasing the operation cost of actions, the implementing action would be less and the planning action would be more. So, increasing the operation cost can promote the schema acquisition. We use "cost-benefit analysis" strategy to explain this result. This strategy means that: Human is rational, before doing one action, he will weigh the cost and the coming benefit of this action, if the coming benefit is higher than the cost, he will implement this action; if the cost is higher than the coming benefit, this action will be contained. On the one hand, this research further affirms the core opinion of the Cognitive Load Theory: Human's cognitive resource is limited, we should put the limited resource into actions which is related to the schema acquisition; On the other hand, for the learning material designing principle which is advanced by the Cognitive Load Theory, we raise our questions. Besides, the question we raised holds some identical views with the constructive learning opinion: Learning is not passive information absorption, but positively constructing the meaning of the information, besides, this kind of construction can't done by others. The result of this research can provide some theory guidance and experimental basis for the designing of the MSS's science teaching material from a complete new angle.

中小学生欺负行为及其主要影响因素研究

The present paper studied the school bullying and the primary impact factors, for understanding the nature of bullying, and providing measures and references to the elimination and controlling of school bullying. Primarily with methods of questionnaires and psychometrics, combined with case study and interviews, the following findings were found: in Chinese culture, bullying is a behavior intentionally causing harm to the weaker or weakers. There were 5 types of bullying-physical, social exclusion, threat, breakage and verbal. In Chinese schools the occurrence of bullying had regular patterns. The factor that impact children's bullying behavior was personality traits, interpersonal techniques, family atmosphere, education and upbringing styles. In personality traits, bullies tended to be more extroversive, impulsive, obstinate, obdurate and lack of sympathy. Victims tended to be more introversive, self-restrained, lack of confidence, lonely, anxious and depressive. Both of them expressed more mental problem tendencies than normal children did. When confronted with interpersonal conflicts, they used little problem solving strategies. Bullies had more extroverted emotional responses, and victims had more social support strategies. In the light of family influence, bullies were relatively superior in family's social economic conditions. But their parents had little time and energy spent on them. They tended to be punitive, and had indulgent, reject or despotic upbringing styles. The role of victim might be related to the disadvantage of family's social economic status. Their parents had the tendency of spoiling and overindulgence. The research concluded that in different cultures the connotation of bullying was not homogenous. The occurrence of school bullying had regular patterns. Bullying behavior was primarily influenced by the personality traits of both bullies and victims, the coping strategies of interpersonal conflicts, family's social economic status, parents' basic emotional attitudes, ways of educating, punitive tendencies and school atmosphere. The occurrence of bullying behavior was the result of the combined process of past experience, behavior habits, personality traits, cognitive evaluation, certain evocative clues and the environment conditions. It reminded that quality education and mental health education in schools was essential. Strengthening basic social skill training in school, creating positive family atmosphere, having more communications between schools and families and implementing strict regulations against bullying was essential to interfere and eliminate the school bullying.

对癌症生存者应对资源的研究

A survey study of cancer survivors was conducted to explore the coping resources, which buffers the life of cancer survivors against stressful situation. Participants reported coping strategies, positive affect and negative affect, personality, perceived social support, fighting spirit and helpless/hopeless as well as quality of life through a set of self-assessment questionnaire. The results indicated that the frequency of coping strategies used by cancer survivors from high to low were: growing, problem solving, seeking support,self-controlling, wishful thinking, and distancing. The correlational analysis indicated that among the six sets of coping strategies, growing was positively correlated most strongly with most of the dimensions in quality of life as well as positive affect. Among the five personality, Neuroticism was positively correlated most strongly with helpless/hopeless and negative affect; and was negatively correlated most strongly with fighting spirit and positive affect. Extraversion was positively correlated most strongly with positive affect and negatively correlated most strongly with helpless/hopeless; Agreeableness was negatively correlated most strongly with negative affect; Conscientiousness was positively correlated most strongly with fighting spirit. Subjects with higher score in quality of life reported higher frequency of coping strategies in growing and problem solving and less in wishful thinking. They also reported higher scores in Extraversion, Agreeableness, Conscientiousness as well as lower scores in Neuroticism. The regression analysis displayed that not negative affect but positive affect entered the regression model when all the psychological and social variables in the study were accounted for. Taken together, these data suggested that, growing was the most effective coping strategy among the six sets of strategies for cancer survivors to improve quality of life, to maintain positive affect and to enhance fighting spirit. Neuroticism was vulnerable to resist stressors; Extraversion, Agreeableness, and Conscientiousness were stress-resisted factors. Positive affect may has more adaptational significance than negative affect during chronic stress. These data also implicated that positive affect should be paid more attention to in coping research.

大学生应激应付研究

In this study, we made research on coping with stress in undergraduate students. The whole work included two parts: (a) We developed the Coping Strategies Questionnaire and had it tested. Five kinds of coping strategies were found by factor analysis: Problem Solving, Passive Acceptance, Support Seeking, Emotion Regulation, and Unadaptation. The reliability and validity coefficients of the questionnaire was high. (b) We examined the relations among personality characteristics (Locus of control, Extraversion, Neuroticism), emotion state, cognitive appraisal (psychological pressure, controllability, resource of social support), and the specific coping processes in several specific stressful events. The results indicated that coping have some degree of consistency across different situations which suggested that there is a general coping tendency, and that this general coping tendency, in addition to the above considered variables, have different degree of effects on subjects' choice of specific coping strategies. Finally, theoretical model of the relationship was tested through path analysis.

问题解决及学习中的条件认知水平

Learning to recognize the conditions under which actions should be considered is a crucial component in the acquisition of cognitive skill. This research focus on the way in which conditions are recognized during problem solving, so as to design effective material for learning through problem solving. The results of experiment I indicated that the subjects abstracted contents from different resources as condition at structural level through out the whole process of problem solving. The results of experiment 2 indicated that the efficiency of learning through problem solving could be greatly improved by emphasizing the recognization of conditions at structural level. The implications for both theory and application are discussed.