基于PC的一种新型现场总线控制系统

PC性能的不断提高及实时操作系统内核的出现,促使了一种基于PC和现场总线的新型控制系统的诞生。由于该系统成本低,占用空间少,在联网、监控等方面有突出优点,并且PC机性能已经非常可靠,所以它可以取代传统的PLC来完成实时控制任务。为了验证系统的可行性,文章系统地介绍了这类新型控制系统的优点和整体软硬件结构,并对其中一个重要的性能指标——响应时间,进行了详细分析,然后通过一个实际系统——自动传输线系统,验证了这一控制系统的可行性。

基于工业无线网络WIA技术的储油罐监测系统

在分析现有的储油罐区监测技术的基础上,提出了一个基于工业无线网络WIA技术的储油罐监测系统方案,详细介绍了该方案的系统运行原理、系统结构及系统功能。

基于工业无线网络WIA技术的管道泄漏监测系统

在分析现有的管道泄漏监测技术的基础上,提出了一个基于工业无线网络WIA技术的管道泄漏监测系统方案,详细介绍了该方案的系统运行原理、系统结构及系统性能及特点。

Application of laser cladding technology to improve the interface of thermal barrier coatings

The present study is focused on improvement of the adhesion properties of the interface between plasma-sprayed coatings and substrates by laser cladding technology (LCT), Within the laser-clad layer there is a gradient distribution in chemical composition and mechanical properties that has been confirmed by SEM observation and microhardness measurement. The residual stress due to mismatches in thermal and mechanical properties between coatings and substrates can be markedly reduced and smoothed out. To examine the changes of microstructure and crack propagation in the coating and interface during loading, the three-point bending test has been carried out in SEM with a loading device. Analysis of the distribution of shear stress near the interface under loading has been made using the FEM code ANSYS, The experimental results show clearly that the interface adhesion can be improved with LCT pretreatment, and the capability of the interface to withstand the shear stress as well as to resist microcracking has been enhanced.

Influence of the Processing Conditions on the Characteristics of the Clad Layers Produced with Laminar Plasma Technology

Laminar plasma technology was used to produce ceramic hardened layers of Al2O3-40% mass Ni composite powders on stainless steel substrates. In order to investigate the influences of processing conditions on the morphologies of the surface modified layers, two different powder-feeding methods were tested, one with carrier gas called the powder injection method, and the other without carrier gas called powder transfers method. The microscopic investigations demonstrate that the cross-section of the clad layers consists of two distinct microstructural regions, in which the Al2O3 phases exhibit different growth mechanisms. When the powder transfers method is adopted, the number density and volume fraction of the Al2O3 particles increase considerably and their distributions exhibit zonal periodical characteristics. When the powder-feeding rate increases, the microstructure of the Al2O3 phases changes from a small globular to a long needle shape. Finite element simulations show that the transient thermo-physical features of the pool substances, such as solidification rate and cooling rate, influence strongly the mechanisms of the nucleation and the directional growth of the Al2O3 phases in the thermal processing.