森林管理对动物生境影响的模拟研究——以小兴安岭友好林业局为例

理解森林管理对野生动物生境的累积效应，需要对不同森林管理预案作出预测、分析和评价。本文，以小兴安岭友好林业局为研究区，利用空间直观景观模型LANDIS模拟其在6种森林管理预案—无采伐、皆伐、择伐I（禁伐区不采伐，限伐区和商品林区每10年采伐面积分别为5%和10%）、择伐II（限伐区和商品林区10%和15%）、造林I（采伐同择伐I，伐后人工更新）和造林II（采伐同择伐II，伐后人工更新）下200年内的森林景观变化。在查阅文献、野外考察和咨询相关专家的基础上，以GIS为平台，构建有着不同生境需求的3种动物：松鼠（Sciurus vulgaris）、马鹿（Cervus elaphus）和花尾榛鸡（Bonasa bonasia）在景观尺度上的生境适宜度指数（Habitat suitability index, HSI）模型，利用Arc的宏语言AML（Arc Macro Language）将LANDIS的输出结果与3种动物的HSI模型相结合，借助生境单元和类水平（Class level）上的景观指数（结合度指数等）评价动物生境，以反映不同森林管理预案对动物生境的影响。研究结果表明： 1）对于LANDIS的模拟结果而言，不同森林管理预案往往导致不同的森林演替动态：无采伐和2造林方案下，森林逐渐向成、过熟林演替，且造林方案显著增加了营林树种的分布面积；择伐I和择伐II下，由于成、过熟林被采伐，森林向后期演替的速度较为缓慢，而皆伐下，中、幼龄林的比重较大。定性而言，对于偏好早期演替的动物而言，皆伐下的生境适宜性较高；对于偏好中、后期演替森林的动物而言，2种择伐方案下生境适宜性较高；对于偏好后期演替的动物而言，无采伐和2造林方案下生境适宜性较高。 2）对于松鼠，无采伐和2造林预案下的生境单元和适宜生境（HSI≥0.5）结合度指数较高，适宜生境的平均斑块面积较大，表明这3种预案下的生境适宜性较高，而2择伐预案由于移去了大量成、过熟林，导致松鼠生境适宜性的下降，对于皆伐，尽管采伐量比2择伐预案的小，由于其不利于针叶林的天然更新，对松鼠的生境破坏更为严重。 3）对于马鹿，皆伐和2造林预案下的生境单元和结合度指数较高，而无采伐下的生境单元和结合度指数整体上又小于2择伐预案下的，这表明，适当的干扰反而利于提高马鹿的生境适宜性，因为，若没有这些采伐、造林等干扰活动，森林的郁闭度会随着树冠的封闭而逐渐加大，下层的许多不耐荫的树种就会消失或减少，降低马鹿的食物来源。 4）对于花尾榛鸡，若不考虑营林活动对其干扰，2造林预案下的生境单元和结合度指数较高，其次为无采伐预案，而皆伐和2择伐方案下较低，这表明，单纯的采伐的将减小花尾榛鸡的生境适宜性。 生态系统是一复杂的系统，因此，不可能存在适于所有动物的森林管理预案，对于管理预案的选择取决于管理者多方面（经济、生态和社会）的权衡。本文是将LANDIS与HSI相结合模拟评估森林管理预案对动物生境影响的一次尝试，研究结果表明了这一方法的实用性。尽管这一方法存在一定的局限性，但利用这一方法，能够可视化和量化结果，并比较不同森林管理预案，从生物多样性保护出发，为森林管理提供决策支持。最后，需要声明的是，本研究侧重方法的探讨，作为实际应用，还需要大量的野外工作来验证HSI模型。

Improvement of Aircraft Rolling Power by Use of Piezoelectric Actuators

Piezoelectric actuators are distributed on both side of a rectangular wing model,and the possibility of improvement of aircraft rolling power is investigated. The difference between the model with aileron deflection and the model without aileron (fictitious control surface, FCS) is studied. The analytical results show that these two cases are substantial different. In aileron deflection case, the aeroelastic effect is disadvantageous, so the structural stiffness should be high until the electrical voltage is not necessary. But in the case of FCS,the aeroelastic effect is advantageous and it means that lower structural stiffness can lead to lower voltage. Compared with aileron project, the FCS project can save structure weight.

An improvement and proof of OGY method

OGY method is the most important method of controlling chaos. It stabilizes a hyperbolic periodic orbit by making small perturbations for a system parameter. This paper improves the method of choosing parameter, and gives a mathematics proof of it.

An improvement on the theoretical model for the large-scale coherent structures in the outer region of a turbulent boundary layer

According to the experimental results, there exist large-scale coherent structures in the outer region of a turbulent boundary layer, which have been studied by many authors.As experimental results, Antonia (1990) showed the phase- aver aged streamlines and isovorticity lines of the large-scale coherent structures in a turbulent boundary layer for different Reynolds numbers. Based on the hydrodynamic stability theory, the 2-D theoretical model for the large-scale structures was proposed by Luo and Zhou, in which the eddy viscosity was defined as a complex function of the position in the normal direction. The theoretical results showed in ref. were in agreement with those in ref. However, there were two problems in the results. One is that in the experimental results, there were divergent focuses between two saddle points in the streamlines, but in the theoretical results, there were centers. The other is that the stretched parts of the isovorticity lines appear at the location of centers in the theoretical results, while in the experimental results they located somewhere between the focuses and saddle points. The reason is that the computations were based on a 2-D model.

One-dimensional improvement and two-dimensional and 3-dimensional treatments for stable oscillation condition, mode structure and power output in high-speed-flow lasers

For high-speed-flow lasers, the one-dimensional and first-order approximate treatment in[1] under approximation of geometrical optics is improved still within the scope of approx-imation of geometrical optics. The strict accurate results are obtained, and what is more,two- and three-dimensional treatments are done. Thus for two- and three-dimensional cases, thestable oscillation condition, the formulae of power output and analytical expression of modesunder approximation of geometrical optics (in terms of gain function) are derived. Accord-ing to the present theory, one-and two-dimensional calculations for the typical case of Gerry'sexperiment are presented. All the results coincide well with the experiment and are better thanthe results obtained in [1].In addition, the applicable scope of Lee's stable oscillation condition given by [1] is ex-panded; the condition for the approximation of gcometrical optics to be applied to mode con-structure in optical cavity is obtained for the first time and the difference between thiscondition and that for free space is also pointed out in the present work.

A scheme for multiple sequences alignment optimization-an improvement based on family representative mechanics features

As a basic tool of modern biology, sequence alignment can provide us useful information in fold, function, and active site of protein. For many cases, the increased quality of sequence alignment means a better performance. The motivation of present work is to increase ability of the existing scoring scheme/algorithm by considering residue–residue correlations better. Based on a coarse-grained approach, the hydrophobic force between each pair of residues is written out from protein sequence. It results in the construction of an intramolecular hydrophobic force network that describes the whole residue–residue interactions of each protein molecule, and characterizes protein's biological properties in the hydrophobic aspect. A former work has suggested that such network can characterize the top weighted feature regarding hydrophobicity. Moreover, for each homologous protein of a family, the corresponding network shares some common and representative family characters that eventually govern the conservation of biological properties during protein evolution. In present work, we score such family representative characters of a protein by the deviation of its intramolecular hydrophobic force network from that of background. Such score can assist the existing scoring schemes/algorithms, and boost up the ability of multiple sequences alignment, e.g. achieving a prominent increase (50%) in searching the structurally alike residue segments at a low identity level. As the theoretical basis is different, the present scheme can assist most existing algorithms, and improve their efficiency remarkably.

Improvement of sensitivity and refractive-index changes in LiNbO3 : Ce : Cu crystals with UV light

A nonvolatile recording scheme is proposed using LiNbO3:Ce:Cu crystals and modulated UV light to record gratings simultaneously in two centres and using red light to bleach the grating in the shallow centre to realize persistent photorefractive holographic storage. Compared with the normal UV-sensitized nonvolatile holographic system, the amplitude of refractive-index changes is greatly increased and the recording sensitivity is significantly enhanced by recording with UV light in the LiNbO3:Ce:Cu crystals. Based on jointly solving the two-centre material equations and the coupled-wave equations, temporal evolutions of the photorefractive grating and the diffraction effciency are effectively described and numerically analysed. Roles of doping levels and recording-beam intensity are discussed in detail. Theoretical results confirm and predict experimental results.

Composite second-order performance improvement in optical fibre CATV transmission system using chirped fibre grating

Theoretically, we analyse the dispersion compensation characteristics of the chirped fibre grating (CFG) in an optical fibre cable television (CATV) system and obtain the analytic expression of the composite second-order (CSO) distortion using the time-domain form of the field envelope wave equation. The obtained result is in good agreement with the numerical simulation result. Experimentally, we verify the result by making use of the tunable characteristics of CFG to change the dispersion compensation amount and obtain an optimal CSO performance in a 125km fibre transmission link. Both the theoretical and experimental results show that the CSO performance can be improved by properly choosing the dispersion compensation amount for a certain fibre transmission link.

Sensitivity improvement by UV-light recording in LiNbO3 : Ce : Cu crystals

Modulated UV light is used to increase the sensitivity of the two-centre holographic recording. Inherent mechanisms of nonvolatile holographic recording in oxidized and reduced crystals are numerically analysed based on solving the two-centre material equations modilied for UV-Iight recording. Experiments verification is performed with an oxidized crystal and a reduced crystal, and the role of UV intensity on the sensitivity is presented.

Improvement in refractive-index change in LiNbO3 : Ce : Cu by applying an external electric field

By jointly solving two-centre material equations with a nonzero external electric field and coupled-wave equations, we have numerically studied the dependence of the non-volatile holographic recording in LiNbO3:Ce:Cu crystals on the external electric field. The dominative photovoltaic effect of the non-volatile holographic recording in doubly doped LiNbO3 crystals is directly verified. And an external electric field that is applied in the positive direction along the c-axis (or a large one in the negative direction of the c-axis) in the recording phase and another one that is applied in the negative direction of the c-axis in the fixing phase are both proved to benefit strong photorefractive performances. Experimental verifications are given with a small electric field applied externally.

Refractive-index change and sensitivity improvement in holographic recording in LiNbO3:Ce:Cu crystals with green light

Nonvolatile holographic recording is performed with green light in LiNbO3:Ce:Cu crystals. The refractive-index change and the recording sensitivity are times better than those obtained by recording with red light, and higher optical fixing efficiency is obtained. Correspondingly, theoretical investigations are given.

Beam quality improvement of laser diode array by using off-axis external cavity

A novel off-axis external cavity is designed for laser diode array to improve the beam quality. In this external cavity, a circle aperture with variable size is used as a spatial filter. The diameter of aperture is optimized to 1.2mm and the off-axis angle of external cavity is optimized at 2.6 deg. In the optimal case, the beam parameter product (BPP) of laser diode array is reduced to 121 mm. mrad from 1050 mm. mrad with external cavity optical efficiency of 81%. (C) 2007 Optical Society of America.