Electronic structure and optical gain of truncated InAs1-xNx/GaAs quantum dots

The shape of truncated square-based pyramid quantum dots (QDs) is similar to that of real QDs in experiments. The electronic band structures and optical gain of InAs1-xNx/GaAs QDs are calculated by using the 10-band k.p model, and the strain is calculated by the valence force field (VFF) method. When the top part of the QD is truncated, greater truncation corresponds to a flatter shape of the QD. The truncation changes the strain distribution and the confinement in the z direction. A flatter QD has a greater C1-HH1 transition energy, greater transition matrix element, less detrimental effect of higher excited transition, and higher saturation gain and differential gain. The trade-off between these properties must be considered. From our results, a truncated QD with half of its top part removed has better overall performance. This can provide guidance to growing QDs in experiments in which the proper growing conditions can be controlled to achieve required properties. (C) 2009 Elsevier Ltd. All rights reserved.

GaAs／Si／AlAs异质结不同生长温度Si夹层分布的CV实验研究

用MBE生长设备制造了GaAs/Si/AlAs异质结，通过CV法研究了异质结的带阶和GaAs层在不同温度下生长对0．5分子层Si夹层的影响，得到Si夹层的空间分布随GaAs层生长温度的升高而由局域变为弥散的温度效应。

Purification and characterization of recombinant truncated human interleukin-11 expressed as fusion protein in Escherichia coli

Mature human interleukin-11 (HuIL-11) is a cytokine consisting of 178 amino acid residues that results from scission of the N-terminal signal peptide, consisting of 21 amino acid residaues, from the corresponding nascent polypeptide. A DNA fragment encoding a truncated HuIL-11 (trHuIL-11), with an additional 5 amino acid residues removed from the N-terminus, was cloned into vector pGEX-2T between the BamHI site and the EcoRI site. Upon transformation with Escherichia coli BL21, the construct over-produced a glutathione S-transferase (GST)-fused protein in a soluble form after IPTG induction. The fusion protein was initially fractionated with butyl-Sepharose 4 fast flow column and by affinity chromatography using a GSH-Sepharose 4B column. On-site enzymatic release with thrombin gave the target protein at 96% purity as judged by SDS-PAGE and HPLC. Expression of the interleukin as a GST-fused protein thus greatly improved downstream processing. Subsequent biological activity assay suggested that trHuIL-11 had similar activity profile to the naturally produced sample and may be a promising candidate for further development as biopharmaceutical.

Perturbational Finite Volume Method For The Solution of 2-D Navier-Stokes Equations on Unstructured and Structured Colocated Meshes

Based on the first-order upwind and second-order central type of finite volume( UFV and CFV) scheme, upwind and central type of perturbation finite volume ( UPFV and CPFV) schemes of the Navier-Stokes equations were developed. In PFV method, the mass fluxes of across the cell faces of the control volume (CV) were expanded into power series of the grid spacing and the coefficients of the power series were determined by means of the conservation equation itself. The UPFV and CPFV scheme respectively uses the same nodes and expressions as those of the normal first-order upwind and second-order central scheme, which is apt to programming. The results of numerical experiments about the flow in a lid-driven cavity and the problem of transport of a scalar quantity in a known velocity field show that compared to the first-order UFV and second-order CFV schemes, upwind PFV scheme is higher accuracy and resolution, especially better robustness. The numerical computation to flow in a lid-driven cavity shows that the under-relaxation factor can be arbitrarily selected ranging from 0.3 to 0. 8 and convergence perform excellent with Reynolds number variation from 102 to 104.

非相对论热力学中玻意耳定律与焦耳定律的相互独立性

证明在非相对论热力学理论系统中,焦耳定律不是玻意耳定律的推论,玻意耳定律也不是焦耳定律的推论.用热力学证明理想气体的低温热容满足关系式∫ε0(CV(θ))/(θ)dθ＝+∞,并对以往的争论给予一些评论.

The Capillary Force In Micro- And Nano-Indentation With Different Indenter Shapes

The influence of the indenter shapes and various parameters on the magnitude of the capillary force is studied on the basis of models describing the wet adhesion of indenters and substrates joined by liquid bridges. In the former, we consider several shapes, such as conical, spherical and truncated conical one with a spherical end. In the latter, the effects of the contact angle, the radius of the wetting circle, the volume of the liquid bridge, the environmental humidity, the gap between the indenter and the substrate, the conical angle, the radius of the spherical indenter, the opening angle of the spherical end in the truncated conical indenter are included. The meniscus of the bridge is described using a circular approximation, which is reasonable under some conditions. Different dependences of the capillary force on the indenter shapes and the geometric parameters are observed. The results can be applicable to the micro- and nano-indentation experiments. It shows that the measured hardness is underestimated due to the effect of the capillary force. (c) 2008 Elsevier Ltd. All rights reserved.

The effects of capillary force in micro or nano-indentation

Models describing wet adhesion between indenters and substrates joined by liquid bridges are investigated. The influences of indenter shapes and various parameters of structures on capillary force are focused. In the former, we consider several shapes, such as conical, spherical and truncated conical indenter with a spherical end. In the latter, the effects of the contact angle, the environmental humidity, the gap between the indenter and the substrate, etc. are included. Different dependences of the capillary force on the indenter shapes and the geometric parameters are observed. Most interesting finding is that applying the present results to micro- and nano-indentation experiments shows the size effect in indentation hardness not produced but underestimated by the effects of capillary force.(4 refs)