8 resultados para Topics
em Chinese Academy of Sciences Institutional Repositories Grid Portal
Resumo:
In 1990 JET operated with a number of technical improvements which led to advances in performance and permitted the carrying out of experiments specifically aimed at improving physics understanding of selected topics relevant to the "NEXT STEP". The new facilities include beryllium antenna screens, a prototype lower hybrid current drive system, and modification of the NI system to enable the injection of He-3 and He-4. Continued investigation of the hot-ion H-mode produced a value of n(D)(0)tau-E(T)(i)(0) = 9 x 10(20)m-3s keV, which is near conditions required for Q(DT) = 1, while a new peaked density profile H-mode was developed with only slightly lower performance. Progress towards steady state operation has been made by achieving ELMy H-modes under certain operating conditions, while maintaining good tau-E values. Experimental simulation of He ash transport indicates effective removal of alpha-particles from the plasma core for both L and H mode plasmas. Detailed analyses of particle and energy transport have helped establish a firmer link between particle and energy transport, and have suggested a connection between reduced energy transport and reversed shear. Numerical and analytic studies of divertor physics carried out for the pumped divertor phase of JET have helped clarify the key parameters governing impurity retention, and an intensive model validation effort has begun. Experimental simulation of alpha-particle effects with beta-fast up to 8% have shown that the slowing down processes are classical, and have given no evidence of deleterious collective effects.
Resumo:
An auto-focusing method based on the image brightness gradient sharpness function is presented for imaging ellipsometry system, in which the image plane of the thin-film specimen is not perpendicular to the optical axis. The clear image of a specimen with large area is obtained by moving the imaging sensor in optical axis direction and around its sensitive surface centre successively. The experimental results demonstrate its feasibility.
Resumo:
In order to characterize the physical and spatial properties of nano-film pattern on solid substrates, an automatic imaging spectroscopic ellipsometer (ISE) based on a polarizer - compensator - specimen - analyzer configuration in the visible region is presented. It can provide the spectroscopic ellipsometric parameters psi (x, y, lambda) and Delta (x, y, lambda) of a large area specimen with a lateral resolution in the order of some microns. A SiO2 stepped layers pattern is used to demonstrate the function of the ISE which shows potential application in thin film devices' such as high-throughput bio-chips.
Resumo:
This book elucidates the methods of molecular gas dynamics or rarefied gas dynamics which treat the problems of gas flows when the discrete molecular effects of the gas prevail under the circumstances of low density, the emphases being stressed on the basis of the methods, the direct simulation Monte Carlo method applied to the simulation of non-equilibrium effects and the frontier subjects related to low speed microscale rarefied gas flows. It provides a solid basis for the study of molecular gas dynamics for senior students and graduates in the aerospace and mechanical engineering departments of universities and colleges. It gives a general acquaintance of modern developments of rarefied gas dynamics in various regimes and leads to the frontier topics of non-equilibrium rarefied gas dynamics and low speed microscale gas dynamics. It will be also of benefit to the scientific and technical researchers engaged in aerospace high altitude aerodynamic force and heating design and in the research on gas flow in MEMS
| [1] Molecular structure and energy states | (21) | ||
| [2] Some basic concepts of kinetic theory | (51) | ||
| [3] Interaction of molecules with solid surface | (131) | ||
| [4] Free molecular flow | (159) | ||
| [5] Continuum models | (191) | ||
| [6] Transitional regime | (231) | ||
| [7] Direct simulation Monte-Carlo (DSMC) method | (275) | ||
| [8] Microscale slow gas flows, information preservation method | (317) | ||
| [App. I] Gas properties | (367) | ||
| [App. II] Some integrals | (369) | ||
| [App. III] Sampling from a prescribed distribution | (375) | ||
| [App. IV] Program of the couette flow | (383) | ||
| Subject Index | (399) | ||
Resumo:
Adiabatic shear localization is a mode of failure that occurs in dynamic loading. It is characterized by thermal softening occurring over a very narrow region of a material and is usually a precursor to ductile fracture and catastrophic failure. This reference source is the first detailed study of the mechanics and modes of adiabatic shear localization in solids, and provides a systematic description of a number of aspects of adiabatic shear banding. The inclusion of the appendices which provide a quick reference section and a comprehensive collection of thermomechanical data allows rapid access and understanding of the subject and its phenomena. The concepts and techniques described in this work can usefully be applied to solve a multitude of problems encountered by those investigating fracture and damage in materials, impact dynamics, metal working and other areas. This reference book has come about in response to the pressing demand of mechanical and metallurgical engineers for a high quality summary of the knowledge gained over the last twenty years. While fulfilling this requirement, the book is also of great interest to academics and researchers into materials performance.Table of Contents
| 1 | Introduction | 1 |
| 1.1 | What is an Adiabatic Shear Band? | 1 |
| 1.2 | The Importance of Adiabatic Shear Bands | 6 |
| 1.3 | Where Adiabatic Shear Bands Occur | 10 |
| 1.4 | Historical Aspects of Shear Bands | 11 |
| 1.5 | Adiabatic Shear Bands and Fracture Maps | 14 |
| 1.6 | Scope of the Book | 20 |
| 2 | Characteristic Aspects of Adiabatic Shear Bands | 24 |
| 2.1 | General Features | 24 |
| 2.2 | Deformed Bands | 27 |
| 2.3 | Transformed Bands | 28 |
| 2.4 | Variables Relevant to Adiabatic Shear Banding | 35 |
| 2.5 | Adiabatic Shear Bands in Non-Metals | 44 |
| 3 | Fracture and Damage Related to Adiabatic Shear Bands | 54 |
| 3.1 | Adiabatic Shear Band Induced Fracture | 54 |
| 3.2 | Microscopic Damage in Adiabatic Shear Bands | 57 |
| 3.3 | Metallurgical Implications | 69 |
| 3.4 | Effects of Stress State | 73 |
| 4 | Testing Methods | 76 |
| 4.1 | General Requirements and Remarks | 76 |
| 4.2 | Dynamic Torsion Tests | 80 |
| 4.3 | Dynamic Compression Tests | 91 |
| 4.4 | Contained Cylinder Tests | 95 |
| 4.5 | Transient Measurements | 98 |
| 5 | Constitutive Equations | 104 |
| 5.1 | Effect of Strain Rate on Stress-Strain Behaviour | 104 |
| 5.2 | Strain-Rate History Effects | 110 |
| 5.3 | Effect of Temperature on Stress-Strain Behaviour | 114 |
| 5.4 | Constitutive Equations for Non-Metals | 124 |
| 6 | Occurrence of Adiabatic Shear Bands | 125 |
| 6.1 | Empirical Criteria | 125 |
| 6.2 | One-Dimensional Equations and Linear Instability Analysis | 134 |
| 6.3 | Localization Analysis | 140 |
| 6.4 | Experimental Verification | 146 |
| 7 | Formation and Evolution of Shear Bands | 155 |
| 7.1 | Post-Instability Phenomena | 156 |
| 7.2 | Scaling and Approximations | 162 |
| 7.3 | Wave Trapping and Viscous Dissipation | 167 |
| 7.4 | The Intermediate Stage and the Formation of Adiabatic Shear Bands | 171 |
| 7.5 | Late Stage Behaviour and Post-Mortem Morphology | 179 |
| 7.6 | Adiabatic Shear Bands in Multi-Dimensional Stress States | 187 |
| 8 | Numerical Studies of Adiabatic Shear Bands | 194 |
| 8.1 | Objects, Problems and Techniques Involved in Numerical Simulations | 194 |
| 8.2 | One-Dimensional Simulation of Adiabatic Shear Banding | 199 |
| 8.3 | Simulation with Adaptive Finite Element Methods | 213 |
| 8.4 | Adiabatic Shear Bands in the Plane Strain Stress State | 218 |
| 9 | Selected Topics in Impact Dynamics | 229 |
| 9.1 | Planar Impact | 230 |
| 9.2 | Fragmentation | 237 |
| 9.3 | Penetration | 244 |
| 9.4 | Erosion | 255 |
| 9.5 | Ignition of Explosives | 261 |
| 9.6 | Explosive Welding | 268 |
| 10 | Selected Topics in Metalworking | 273 |
| 10.1 | Classification of Processes | 273 |
| 10.2 | Upsetting | 276 |
| 10.3 | Metalcutting | 286 |
| 10.4 | Blanking | 293 |
| Appendices | 297 | |
| A | Quick Reference | 298 |
| B | Specific Heat and Thermal Conductivity | 301 |
| C | Thermal Softening and Related Temperature Dependence | 312 |
| D | Materials Showing Adiabatic Shear Bands | 335 |
| E | Specification of Selected Materials Showing Adiabatic Shear Bands | 341 |
| F | Conversion Factors | 357 |
| References | 358 | |
| Author Index | 369 | |
| Subject Index | 375 |
Resumo:
Since 2001, a research group in the Institute of Mechanics, Chinese Academy of Sciences, has been devoted to the research of essential mechanics issues for submerged floating tunnel (SFT). In addition to the structural design of the SFT prototype in Qiandao Lake, the relevant researches cover a number of topics. This paper briefly describes the research procedure and results, including dynamic response of SFT due to surface wave, vortex-induced vibration of anchoring system, structural analysis of curved SFT, temperature effects of curved SFT, structural dynamic response due to accidental load, and effects of structural parameters (buoyancy-weight ratio, tunnel length，tether stiffness，etc.) on dynamic response.
