Observation of electric current induced by optically injected spin current

Linearly polarized light at normal incidence injects a spin current into a strip of two-dimensional electron gas with Rashba spin-orbit coupling. The authors report observation of an electric current when such light is shed on the vincinity of the junction in a crossbar-shaped InGaAs/InAlAs quantum well Rashba system. The polarization dependence of this electric current was experimentally observed to be the same as that of the spin current. The authors attribute the observed electric current to the scattering of the optically injected spin current at the crossing. (c) 2007 American Institute of Physics.

Essential elements of integrated coastal zone management

The coastal zone comprises a narrow strip of coastal lowlands and a vast area of coastal waters. While the coastal zone represents approximately 10% of the earth's surface, its coastal lowlands are inhabited by more than 50% of the world population. The coastal zone has become the major site for extensive and diverse economic activities. Many of the coastal developing countries depend heavily on the scarce coastal resources for their economic growth.

大港千米桥地区综合地质地球物理研究

Qianmiqiao buried hill, which is a high-yield burial hill pool, was discovered at Dagang oilfield in 1998. To employ the integrated geological and geophysical research at Qianmiqiao area, it is very valuable and meaningful for the petroleum exploration of Bohai Bay Basin and even the whole country. Based on the previous results, this paper is carried out from the research on Huanghua depression, following the law, i.e. the deep part constrains the shallow, the regional constrains the local, takes the geophysical research in Qianmiqiao oilfield, discusses the formation history of burial hills, burial history, thermal history, the generated and expelling history of hydrocarbon, and migration characteristics, probes into the formation of burial hill pool. This paper uses the gravity and magnetic methods which are based on potential field, with natural sources, configures the inner structure of the earth according to the difference in the density and magnetism of the rock. The geophysical characteristics of Dagang oil field is that it is an area with positive Buge gravity anomal. The upheaval of Moho boundary is in mirror symmetry with the depression of the basin's basement. The positive and negative anomaly distributein axis symmetry, and the orientation is NNE. The thickness of the crust gradually reduces from west to east, from land to sea. The depth gradient strip of Curie surface is similar to Moho boundary, whereas their local buried depth is different. Local fractures imply that the orientation of base rock fractures is NNE-NE, and the base rock is intersected by the fractures of the same/ later term, whose orientation is NW, so the base rock likes rhombic mosaic. The results of tomography show that there exists significant asymmetry in vertical and horizontal direction in the velocity configuration of Huanghua depression. From Dezhou to Tianjin, there exits high-speed block, which extends from south to north. The bottom of this high-speed block is in good agreement with the depth of Moho boundary. Hence we can conclude that the high-speed block is actually the crystal basement. According to seismic data, well data and outcrop data, Huanghua depression can be divided into four structure layers, i.e. Pi,2-T, Ji,2-K, E, N-Q. Qianmiqiao burial hills undergo many tectonic movement, where reverse faults in developed in inner burial hill from Indosinian stage to Yanshanian stage, the normal faults extended in Himalayan stage. Under the influence of tectonic movements, the burial hills show three layers, i.e. the reverse rushing faults in buried hills, paleo-residual hill, and extended horst block. The evolution of burial hills can be divided into four stages: steady raising period from Calenonian to early Hercynian, rushing brake drape period from Indosinian to middle Yanshanian, block tilting period in early Tertiary, and heating depression period from late Tertiary to Quaternary. The basin modeling softwares BasinMod 1-D and Basin 2-D, which are made by PRA corporation, are used in this paper, according to the requirement, corresponding geological model is designed. And we model the burial history, thermal history, hydrocarbon generation and hydrocarbon expelling history of Qianmiqiao area. The results show that present bury depth is the deepest in the geological history, the sedimentary rate of Tertiary is highest and its rising rate of temperature rate is higher. During sedimentary history, there is no large erosion, and in the Tertiary, the deeper sediment was deposited in large space, therefore it is in favor of the conservation and transformation of oil and gas. The thermal research shows that the heat primarily comes from basement of the basin, present geotherm is the highest temperature in the geological history. Major source rock is the strata of ES3, whose organic is abundant, good-typed, maturative and of high-expulsive efficiency. The organic evolution of source rock of O has come to the overmature stage, the evolving time is long and the source rock can be easily destroyed. Therefore it is more difficult for the O formation source rock to form the huge accumulation of oil and gas than Es3 formation. In the research of oil assembling, we first calculated the characteristics of the fluid pressure of single well, then analyzed the distribution of the surplus fluid pressure of each formation and profile, and probe the first hydrocarbon migration situation and the distribution of pressure system of buried hill pool. In every formation, the pressure system of each burial hill has its own characteristics, e.g. high pressure or low pressure. In the research of secondary migration, the fluid potential is calculated while the relative low potential area is figured out. In Qianmiqiao area, the west margin faults have the low potential, and hence is the favorable reconnoiter belt.

辽河坳陷构造活动与油气运聚

The relation between tectonic activity and oil and gas migration and accumulation is one of the major subjects studied in petroleum geology and oil and gas exploration process. Oil and gas exploration practice and understandings thus obtained over a long term have indicated that tectonic activities within hydrocarbon bearing basins had important controlling effect on oil and gas migration and accumulation, but the influence of different hydrocarbon basins and tectonic activities on migration, accumulation and distribution of oil and gas differs to certain degree. Liaohe Depression is located in the northeast strip of Baohai Gulf Basin. The two major faults, Tanlu and Yilan-Yitong fault of Tanlu fault system, which played a significant controlling role on the forming and evolution of Cenozoic hydrocarbon basins in eastern China, pass along the east and west side of the Depression. The special structural location had made Liaohe Depression different from other depressions in the Basin in terms of tectonic evolution, depositional evolution, organic evolution, oil and gas migration and accumulation, and reservoir distribution. Major reasons resulting in these differences are tectonic activities and stress effect. Through analytical study of tectonic evolution history, .depositional history, hydrocarbon evolution history, and oil and gas accumulation history in Liaohe Depression, this paper systematically discusses the controlling effect of regional right-hand rotation strike-slip tectonic activity and stress effect on forming of major hydrocarbon bearing structures, major period of hydrocarbon expulsion from source rock, major direction of secondary oil and gas migration, and distribution of oil and gas accumulations since mid-late period of Oliocene, Paleogene. It has been concluded that major oil and gas bearing anticline structures within the Depression are reversal anticlines formed by right-hand rotation strike-slip shear compressional stress, main hydrocarbon expulsion period happened in the moving period of major right-hand rotation strike-slip tectonic activity, the direction of right-hand rotation strike-slip shear compressional stress was the main direction of secondary oil and gas migration, and the discharging zone of right-hand rotation strike-slip shear compressional stress was major accumulation zone of oil and gas.

Analysis of strip electric saturation model of crack problem in piezoelectric materials

This paper presents a fully anisotropic analysis of strip electric saturation model proposed by Gao et al. (1997) (Gao, H.J., Zhang, T.Y., Tong, P., 1997. Local and global energy release rates for an electrically yielded crack in a piezoelectric ceramic. J. Mech. Phys. Solids, 45, 491-510) for piezoelectric materials. The relationship between the size of the strip saturation zone ahead of a crack tip and the applied electric displacement field is established. It is revealed that the critical fracture stresses for a crack perpendicular to the poling axis is linearly decreased with the increase of the positive applied electric field and increases linearly with the increase of the negative applied electric field. For a crack parallel to the poring axis, the failure stress is not effected by the parallel applied electric field. In order to analyse the existed experimental results, the stress fields ahead of the tip of an elliptic notch in an infinite piezoelectric solid are calculated. The critical maximum stress criterion is adopted for determining the fracture stresses under different remote electric displacement fields. The present analysis indicates that the crack initiation and propagation from the tip of a sharp elliptic notch could be aided or impeded by an electric displacement field depending on the field direction. The fracture stress predicted by the present analysis is consistent with the experimental data given by Park and Sun (1995) (Park, S., Sun, C.T., 1995. Fracture criteria for piezoelectric materials. J. Am. Ceram. Soc 78, 1475-1480).

Surface characteristics of SiO2-TiO2 strip fabricated by laser direct writing

SiO2-TiO2 sol-gel films are deposited on SiO2/Si by dip-coating technique. The SiO2-TiO2 strips are fabricated by laser direct writing using all ytterbium fiber laser and followed by chemical etching. Surface structures, morphologies and roughness of the films and strips are characterized. The experimental results demonstrate that the SiO2-TiO2 sol-gel film is loose in Structure and a shrinkage concave groove forms if the film is irradiated by laser beam. The surface roughness of both non-irradiated and laser irradiated areas increases with the chemical etching time. But the roughness of laser irradiated area increases more than that of non-irradiated area under the same etching time. After being etched for 28 s, the surface roughness value of the laser irradiated area increases from 0.3 nm to 3.1 nm.

Flow injection electrochemical enzyme immunoassay based on the use of an immunoelectrode strip integrate immunosorbent layer and a screen-printed carbon electrode

A flow injection amperometric immunoassay system based on the use of screen-printed carbon electrode for the detection of mouse IgG was developed. An immunoelectrode strip, on which an immunosorbent layer and screen-printed carbon electrode were integrated, and a proposed flow cell have been fabricated. The characterization of the flow immunoassay system and parameters affecting the performance of the immunoassay system were studied and optimized. Amperometric detection at 0.0 V (versus Ag/AgCl) resulted in a linear detection range of 30-700 ng ml(-1), with a detection limit of 3 ng ml(-1). The signal variation among electrode strips prepared from variant batch did not exceed 8.5% (n = 7) by measuring 0.5 mug ml(-1) antigen standard solution.

Morphological Evolution During Synthesis of New AlPO4 Center dot H2O Crystal

A new crystal of aluminophosphate, AIPO(4)(.)H(2)O, is synthesized from two-batch aqueous solution under hydrothermal conditions. Three types of the crystal habits, i.e. the tetragonal double pyramid, the tetragonal prism and the plate-type tetragonal prism, are found from batch-A solution. Two types of the crystal habits, i.e. the hexagonal pyramid and the strip-type tetragonal prism, are found from batch-B solution. The change of crystal morphology is originated from the fluctuation of the synthesis conditions, such as the supersaturation, the temperature and the impurity content. It causes change of the step energies, the defect density and the step roughness, and further, change of the growth rates. Since the crystal morphology is sensitive to the mass transport mechanism, the crystal habits could be changed under the microgravity.

Control of Mean and Fluctuating Forces on a Circular Cylinder at High Reynolds Numbers

A narrow strip is used to control mean and fluctuating forces on a circular cylinder at Reynolds numbers from 2.0 x 10(4) to 1.0 x 10(5). The axes of the strip and cylinder are parallel. The control parameters are strip width ratio and strip position characterized by angle of attack and distance from the cylinder. Wind tunnel tests show that the vortex shedding from both sides of the cylinder can be suppressed, and mean drag and fluctuating lift on the cylinder can be reduced if the strip is installed in an effective zone downstream of the cylinder. A phenomenon of mono-side vortex shedding is found. The strip-induced local changes of velocity profiles in the near wake of the cylinder are measured, and the relation between base suction and peak value in the power spectrum of fluctuating lift is studied. The control mechanism is then discussed from different points of view.

Control Of Vortex Shedding From A Square Cylinder

Small circular, square, and thin-strip cross-sectional elements are used to suppress vortex shedding from a square cylinder at Reynolds numbers in the range of 1.12 x 10(4)-1.02 x 10(5). The axes of the element and cylinder are parallel. The element's size, position, and angle of attack are varied. Measurements of the fluctuating surface pressures and wake velocities, together with smoke flow visualization, show that vortex shedding from both sides of the cylinder is suppressed and the mean drag and fluctuating lift on the cylinder is reduced if the element is installed in an effective zone downstream of the cylinder. The effective zone of the circular element is shown to be much smaller than those of the other elements. The effects of Reynolds number and blockage ratio are investigated. A phenomenon of monoside vortex shedding is observed. The role of the element's bluffness is investigated and the suppression mechanism is discussed.

Vertical Bearing Capacity of a Partially-Embedded Pipeline on Tresca Soils

Slip-line field solutions are presented for the ultimate load of submarine pipelines on a purely cohesive soil obeying Tresca yield criterion, taking into account of pipe embedment and pipe-soil contact friction. The derived bearing capacity factors for a smooth pipeline degenerate into those for the traditional strip-line footing when the embedment approaches zero. Parametric studies demonstrate that the bearing capacity factors for pipeline foundations are significantly influenced by the pipeline embedment and the pipe-soil frictional coefficient. With the increase of pipeline embedment, the bearing capacity factor Nc decreases gradually, and finally reaches the minimum value (4.0) when the embedment equals to pipeline radius. As such, if the pipeline is directly treated as a traditional strip footing, the bearing capacity factor Nc would be over evaluated. The ultimate bearing loads increase with increasing pipeline embedment and pipe-soil frictional coefficient.

Abundance and conservation status of the Yangtze finless porpoise in the Yangtze River, China

middle and lower reaches of the Yangtze River, China. It is the only freshwater population of porpoises in the world and is currently listed as Endangered by IUCN. In November and December 2006 we used two boats and line transect methods to survey the entire current range of the population, except for two lakes (Poyang and Dongting). Sighting results were similar for both boats, so we pooled all data and analyzed them using two line transect models and a strip transect model. All models produced similar estimates of abundance (1111, 1225 and 1000). We then added independent estimates of the number of porpoises from the two lakes for a total estimate of approximately 1800 porpoises. Our findings indicate that the population continues to decline and that its distribution is becoming more fragmented. Our current estimate in the main river is slightly less than half the estimate from surveys between 1984 and 1991 (which was probably an underestimate). We also found an apparent gap in the distribution of porpoises between Yueyang and Shishou (similar to 150 km), where sightings had previously been common. Continued threats to Yangtze finless porpoises include bycatch in unregulated and unselective fishing, habitat degradation through dredging, pollution and noise, vessel strikes and water development. Immediate protective measures are urgently needed to ensure the persistence of finless porpoises in the Yangtze River. The survey design and analytical methods developed in this study might be appropriate for surveys of cetaceans in other river systems. (c) 2008 Elsevier Ltd. All rights reserved.

The diverse Grania fauna (Clitellata : Enchytraeidae) of the Esperance area, Western Australia, with descriptions of two new species

Seven species of the marine enchytraeid genus Grania Southern, 1913 are described from sediments sampled during the 2003 International Workshop on the Marine Flora and Fauna of Esperance Bay and the Recherche Archipelago, on the southern coast of Western Australia. Two species are new to science, the euryhaline Tasmanian G. dolichura Rota and Erseus, 2000 represents a new record for the state, and the remaining four species were known from other parts of Western Australia. Grania quaerens sp. n. is recognized by having a high chaetal index (= 5 short chaetal foot), small coelomocytes, penial apparati with long whip-like terminal stylets, conspicuous spermathecae with ectally bulbous ducts, and ectally granulated ampullae housing sperm rings in their ental region. Grania sperantia sp. n. is readily distinguishable by the complete lack of lateral chaetae, a multiple-banded pattern of the clitellum, extremely long sperm funnels, and the intrasegmental location of the spermathecal pores. The latter new species and four others in the collection (G. bykane Coates, 1990, G. crassiducta Coates, 1990, G. dolichura, and G. ersei Coates, 1990) are remarkable in possessing the head organ, a sensory structure unique to Grania that was not noted previously in Western Australian species. When considering the whole genus, the geographic pattern of the head organ appears southern-centred: of the 17 species of Grania reported to possess it, as many as 13 inhabit the southern latitudes. The seventh species of the Esperance collection, G. vacivasa Coates and Stacey, 1993, is notable for the kind of items found in its gut and the unusual appearance of its pygidium.